Automatic assoc between task metadata and the taskflow app url is missing

We have a BPEL human task. Created a taskflow based on this human task.
We have one Admin server and one managed server(SOA).
Deployed the human task on managed server and then deployed the taskflow on Admin server. Didn't see any errors in both deployments.
We are not able to see the 'automatic association is created between the task metadata and the task flow application URL' which will be created as per the point 29.8.6, http://docs.oracle.com/cd/E17904_01/integration.1111/e10224/bp_designtf.htm#BDCDBJBD.
Please give some pointers.
Thanks,
Mahesh
Edited by: user773275 on Apr 11, 2012 12:43 AM

Hi,
Open the TASKFLOW_PROJ_DIR\adfmsrc\hwtaskflow.xml file.
For each additional human task, add the following element inside the file (at the bottom just before </hwTaskFlows>):
<hwTaskFlow>
<WorkflowName>$TASK_NAME</WorkflowName>
<TaskDefinitionNamespace>$TASK_NAMESPACE</TaskDefinitionNamespace>
<TaskFlowId>$TASK_FLOW_NAME</TaskFlowId>
<TaskFlowFileName>$TASK_FLOW_FILENAME</TaskFlowFileName>
</hwTaskFlow
where:
$TASK_NAME is replaced with the name of the human task inside the .task file (value of the <name> element).
$TASK_NAMESPACE is replaced with the namespace of the human task inside the .task file (value of the attribute targetNameSpace of element <taskDefinition>).
$TASK_FLOW_NAME is copied from the existing <hwTaskFlow>/<TaskFlowId> element.
$TASK_FLOW_FILENAME is copied from the existing <hwTaskFlow>/<TaskFlowFileName> element.
Redeploy the project.
In the above we attach the Task located on your composite to the application form
Arik

Similar Messages

How do I get my notes to sync between my iPhone and the Notes App on my Mac?

I recently upgraded to the new OS 10.9.1 and I understand that without warning us, Apple has decided to remove notes from Mail and make it a separate App. That's fine, but none of the notes on my iPhone are showing up in the Notes app. I have tried creating a new note in the Notes app, but none of my notes seem to be syncing in either direction. This is a HUGE annoyance as I am constantly putting together memos and lists on my computer that I need to be able to view on my phone later or vice versa. How do I get my two Notes apps to sync with each other?

Ok, I signed out from iCloud and it told me that it removed all the data from my computer. I signed then back in and made sure to recheck the box to sync Notes and still the same problem. It has been over an hour and still none of the notes that are still on my phone have shown up in the Notes app on my Mac. The test note I created in the Notes app on my app is not showing up on my phone either. Furthermore, when I click on the Notes app it is still telling me that this computer can't connect to iCloud because of a problem with [email protected] .

What is the difference between regular FaceTime and the Mac App Store FaceTime?

The one in the App Store costs €0,89. How is this one differend?

Yup.
The difference is about a bit.
It's a bit that, when set, allows a database to be in a permanent state of recovery, allowing repeated applications of redo. When a particular recovery operation has finished applying its quota of redo, the database sits there waiting for the next dollop.
A normal controlfile doesn't have that bit set, and when you do 'recover database' to it, it gets to the end of the redo stream and says 'Media Recovery Complete'. No further redo can then be applied to that database, meaning you can't keep a normal database in a permanent state of being recovered.

Difference between task request and change request

What is the difference between task request and change request during sap implementation. In general how many tasks will generate during a normal company inmplementation by any functional consultant?

Hi,
Change request and task request are same.But generally change request is generated during newly created objects or reports that are transported and task request is used when u regenerate the change request by modifying that object again and transporting it in new change request.
A particular change request may contain multiple number of task request but that number depends upon number of objects u transfer during generation and transportation.
Pls do reward points if ans is useful.
Regards,
Suhas.

MacBook Pro won't automatically switch between internal speakers and display audio

I have a MacBook Pro that connects to a LED Cinema display. It used to automatically switch between internal speakers and display audio when plugged in to the display but won't anymore. I have to manually change it in System Preferences --> Sound. Does anyone know how to make it do that again?
thanks,
Ben

I just want to add, I have the same problem, and just want to help raise awareness of it.
1st, the problem only started recently (have been using the Thunderbolt display since it was released), I did not have this problem, and noticed it beginning only in the last month. (since January)
2nd, My particular setup, includes a hard drive attached to the firewire port on the back of the Thunderbolt Display (so, I am wondering if anyone else experienced this problem with a firewire drive being connected).
     My full setup:
          Macbook Air (2011)
         Thunderbolt display
          Western Digital drive (attached to firewire of display)
3rd, If I go into settings, what I will see is the "Display Audio" is selected (but no sound coming out),
If I then select "Internal Speakers," a buffered "history" of all the sounds I did not hear is then played (pretty funny actually) - for example, if I sent mail, adjusted the volume, and started playing a song.... it immediately plays all those sounds when selecting "Internal Speakers"
4th, If i then select "Display Audio" - it does nothing
5th, what I have to do, to resolve this is: eject all my hard drives, disconnect the thunderbolt cable, then reconnect the thunderbolt cable, and everything works as normal.

Merging the task bar and the Start Screen area

Follow-up for:
http://social.technet.microsoft.com/Forums/en-US/dbb2102f-00b7-47ca-88f2-4f88cd9d3409/followup-starting-launching-and-switching-?forum=WinPreview2014Feedback&prof=required
+
http://social.technet.microsoft.com/Forums/en-US/dd12fecb-f23d-4ed5-8dad-9a1efe264678/followup-enhancing-multitasking-in-windows-10-with-the-cloud?forum=WinPreview2014Feedback
Can see the Start Screen more or less works as the Start Screen in Windows 8. However, the coupling features needs to be there. It's a mess.
And there is still the ambiguity between the Taskbar (= Start) and the Start Screen (= Start). It's the same thing, pinning.
And they should relate to desktop virtualization.
May be you could have the icons on the current task bar flow with the start screen area? Work the coloring - and the "ease out" of the menu. So it would seem the task bar is just extending into a bigger area. Then as a user you
could put the pins used on a daily basis at the very bottom. And the ones used weekly on the Start Screen for instance.
Additionally, grouping of pins is needed. That was a nice feature on the Start Screen. And it should be available on the task bar for pins as well - now that the task bar and the Start Screen should be more or less merged as in this
proposition.

I agree. I think the Start Menu tiles should function EXACTLY the same as the Start Screen tiles, which includes the arrangement options in groups as well as the ability to multi-select/pin/move/unpin tiles.
I would also add that I'd like an option to hide the search and task-switcher buttons from the taskbar. Task switcher is redundant considering you can also swipe and keyboard-shortcut that feature. Search is accessible from Start Menu, although
I understand that once Cortana is enabled via Search button that might change my opinion of its usefulness there.

Exact difference between System status and the user status

Hi,
Please tell me the exact difference between System status and the user status .
how we customize the both in the system
Thanks & Regards
Prajith P
Moderation: Locked. Please, try to find an answer first. See rules of engagement
Edited by: Joaquin Fornas on Feb 23, 2012 11:14 AM

Hi,
As you mentioned there are 2 status can be maintained for documents like Equipment Master, Notification, Maintenance Order & other important business documents.
In case, client feels that system status is not enough to capture the details of the object, then user status can be used.
System statuses will be updated automatically based on business transactions which will be done on SAP.
For example, once the equipment is created, System status would CRTD (Created). If you install the same to some superior equipment or FL, then status would be INST (Installed).
If you keeping that equipment in Spare, then for that, you have to maintain separate User Status like AVLB (Available in Stock / Spare) so that through IH08, by using User status, you can the report which is available as spare.
These user status as per the name, should be updated by the user manually.
Regards,
Maheswaran.

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV?

I have an Apple MacBook Pro with 2 USB ports and a MiniDisplay Port. I also have an HDTV with a HDMI port. How can I use the TV as a display without any tethering wires between my computer and the TV? I have a MiniDisplay Port to VGA adapter, but there are two issues with it: The new display doesn't have a VGA port, and even if it did, I wouldn't want to have my mac constantly attached to the display by a cable. I was looking for a way to use the TV as a display without any wires. Is there some type of bluetooth setup I could use? Please let me know if you have any suggestions.

As I wrote above, I think you should look into the Apple TV yourself. The best place to find information about what it can and can't do and to ask your own specific questions is probably in the Apple TV forum, here:
https://discussions.apple.com/community/appletv/appletv

Data reconciliation between R/3 and the BW Systems

How do we do data reconciliation between R/3 and the BW system for the following areas?
Purchasing
Controlling:
Project System:
COPA
SD
AP
Trgards,
Tony G

Tony
Have you looked these documents??
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/biw/how%20to%20validate%20infocube%20data%20by%20comparing%20it%20with%20psa%20data
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/7a5ee147-0501-0010-0a9d-f7abcba36b14
Re: BW v. R/3 data reconciliation
Hope this helps
Thanks
Sat

"USB device not recognized." "The connection between your device and the desktop could not be established. Please check your setup and try again." Tungsten E2, Outlook 2007

Hi,
I am running XP SP 2, on a Dell Vostro 1000, Palm OS Garnet v5.4.7 on a Tungsten E2. I have worked though issues relating to synchronization, Outlook 2007, Docs to Go, etc., in the past. Thank you board members!
Once I worked thru all the initial problems, my Tungsten E2 was sync' ing beautifully to my laptop until a few days ago. There have been no changes (I know of) to the configuration, but now I receive "The connection between your device and the desktop could not be established. Please check your setup and try again." On the laptop I sometimes get "USB device not recognized." I am unclear why I get the PC message sometimes and not others.
I have tried the following: (not necc exactly in this order)
Double checked Hot Sync Mgr settings: Local USB (ver. 6.0.1)
Reset the Palm (multiple times)
Rebooted the laptop (multiple times before and after the Palm resets)
Went to Support Libraries including http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE/,/?St=57,E=0000000001060189973,K=9550,Sxi=3,Case=Obj(3695...)
and http://kb.palm.com/SRVS/CGI-BIN/WEBCGI.EXE?New,Kb=PalmSupportKB,ts=Palm_External2001,Case=obj(1409)
Followed the steps in "Start Here" found at http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=26057
Moved Backup directory as per a post on this forum
Looked for a deleted a file called "Graffiti_ShortCuts_____________" per a post on this forum
Followed the steps in HotSync troubleshooter guide you can run through located on
http://kb.palm.com
Went into Device Manager - found it shows no yellow ! 's
Followed Device Mgr Troubleshooter - went all the way thru with no solution
Tried all four USB ports - the PC's bell-like tone does not sound when I disconnect or reconnect the Plam's cradle like it does when I conn/disconnect other USB devices -I think that is a clue. ...?
Cleaned the Palm's contacts (and cradle's contacts with a old, dry toothbrush)
Read all the posts under "USB device not recognized."
OK, I'm at a loss, can anyone help me? Many thanks in advance!
~Bob
Post relates to: Tungsten E2

Hello!
Using a cradle with the Tungsten E2? Tried bypassing the cradle and just use the hotsync cable? Tried a different computer yet? Somehow, the PC is having problems getting a signal from the device. I assume you have the laptop charger plugged into the laptop during this? Not going through a docking station or port-replicator.
One crazy thing you can try is unplug the charger from your laptop, remove the battery from the laptop and leave it out for like 10mins and put it back in and reboot the laptop. This should not cause side effects but still contact your OEM to make sure that nothing else is needed after leaving the battery out for extended period of time. Keep me posted.
Post relates to: Treo 650 (Unlocked GSM)

What's the difference between Java SDK and the Enterprise Edition?

What's the difference between Java SDK and the Enterprise Edition? Are they both free?

both r free but they are used in diffrent applications. sdk are used for simple apps that run on your computer while j2e (enterprise edition) are ment for large distributed computer systems that include servers and such. if you don't know the diffrence you probably wont need the the j2e, only the sdk.

Customise table inconsistency between ABAP Dictionary and the databas

Hi all,
I have encountered a problem where by, I was not able to activate a table due to inconsistency between ABAP Dictionary and the database.
After I run the SE14--> Check Database object. It has show that there is a missing Unique Index(Primary Index) at the Database Level, but at ABAP Dictionary it is there.
I have try to recreate the primary index at the Database level, but failed. Because one of the primary key field is been dropped from this table.
So now, may I know how can I still make this table Active again?
Is it save to folllow the following solution that I found on internet?
Syntax error in SDCC, table inconsistency between ABAP Dictionary and the database, transport error 8 during the generation of ABAP Dictionary. When you call Transaction SDCC, a termination occurs due to a putative syntax error because a table is not known or active. When you check this with the ABAP dictionary (SE11), you notice, that the table is active or inactive, however it is not possible to activate it. The activation might terminate with the error message 'Inconsistency between ABAP Dictionary and database'. A check of the affected object also delivers this error.
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

I managed to solved this by
Solution
Proceed as follows:
Log on as user DDIC
Call Transaction SE14
Enter the affected table name and
select EDIT
In the following screen, choose Table -> Reconstruct
Confirm the execution
Call Transaction SE11
Enter the affected table name
Display
Activate
Thanks.
CK

Sync data between third-party contacts and calendar apps, and the native apps, in 10.9.3+?

I've had to refrain from updating my Mac Pro from 10.8.5 to 10.9 owing to the removal of SyncServices. I then read that SyncServices was re-introduced on a limited basis in 10.9.3.
It seems unlikely, but I'd like to know whether or not SyncServices in 10.9.3 re-enables the syncing of data between third-party contacts & calendar apps and the native apps, and thereby enables syncing of contacts and calendar info between third-party apps and iOS devices over USB via iTunes. This is the method I use exclusively by choice in 10.8.5, and I will not change it to a cloud-based solution under any circumstances.
If it is not possible, is there a third-party workaround? My calendar app on the Mac Pro at the moment is BusyCal, syncing with Week Cal on the iPhone, but I'll happily buy a new combo of apps if it means I can upgrade to Mavericks and retain USB syncing.
EDIT: a solution which permits syncing of a third-party calendar app on the Mac Pro with a third-party calendar app on the iPhone over an ad-hoc wireless network would also be acceptable, I suppose.

Well, that's pretty disappointing. I guess Apple believes Internet is free and everywhere.

Is there a way to Move files to the iCloud thus freeing up disk space on my Mac? Or does iCloud only sync (replicate) files between my Mac and the cloud?

Is there a way to Move files to the iCloud thus freeing up disk space on my Mac? Or does iCloud only sync (replicate) files between my Mac and the cloud? I want to free up disk space on my Mac and assumed that the icloud would be a good way to do this, but having 'moved' 70Gb of files to the iCloud drive (I've upgraded to 200Gb storage) my Mac is still nearly full and I've realised that it seems to just Sync files just like dropbox.

So, the big question is did the Apple guys confirm that this is how the new iCloud drive should be working? I'm guessing, from your response, that this is indeed the case. Are they going to fix this anytime soon? I thought that this was a new function of the iCloud drive in Yosemite.
I just want an online storage facility to back up my photo & music collections. I did look at Dropbox as they have a good deal going with their Dropbox Pro, however this is still just a sync service where the Master files reside on your local disk drive - although I have read that there may be a way to work around this. Still not ideal.

Relation between statistical document and the real document

How do I get relation between statistical document and the real document.
Actually I want to reverse the posted real document and then convert statistical document into real document.
Problem is that I have the Main/Sub transaction of statistical document but not of real document. So how do i link both of them.

Hello,
LFA1 is just a master data table.
To get the number of open items you refer table BSIK
To get the number of cleared items, you refer table BSAK
These two tables gives you the number of line items posted on vendors.
Hope this is informative.
Regards,
Ravi

Automatic assoc between task metadata and the taskflow app url is missing

Similar Messages

Maybe you are looking for