Automatic Creation of Documents using Document Templates in UCM

Hi,
We need to cater following requirements in my project and we are using Oracle UCM 11g.
1. Can we create documents automatically using some document templates? i.e. Auto-generation of documents based on message input and templates.
2. Can we enter free text into some areas of the documents available in UCM repository? And can we enter that new text parts in to UCM library?
3. Can we automatically create printable pdfs in UCM?
Please guide me how I can achieve these functionality in UCM.
Regards,
Sunny

Hi,
When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
You need to use following user exit at batch creation
EXIT_SAPLV01Z_001
EXIT_SAPLV01Z_002
Hope this helps, reward if useful,
Best Regards VS

Similar Messages

Automatic creation of Notification using T-code IK11

Hi Gurus,
i got stuck in a requirement, where they want Automatic creation of notification using T-code IK11.
I am using EXIT IMRC0001.
Please guide me that with what logic i should go.
Thanks
Regards
VICKY
Moderator Message: Vague Question. Expecting others to do your work for you => Thread Locked.
Edited by: kishan P on May 12, 2011 12:35 PM

In the role give Authorization object P_ORIGIN for Infotype 0, 1 and 2. with Authorization level as R (read)
This will resolve your issue then no need to give sap_all authorization
Good Luck
- Ashish

Document template in UCM

Hi,
I want to make it possible for the users to create documents from a template e.g a MS word document. The template should of course be checked in and not writeable (only readable) to avoid that users change/modify the template.
We are using UCM11g, DIS 11.1.1.4 and Webcenter Spaces 11g PS3.
Anyone have an idea how to create new MS-documents from a template?
Cheers,
Ibrahim

First of all, to my best knowledge, UCM has no out-of-the-box features to create documents - with exception of documents that are produced as results of conversion, or XMLs as results of form submission.
In theory, you could clone a content item (I think you'd need a custom component for that); that is, copy the existing metadata/content to a new one that could be later modified as needed.
Anyone have an idea how to create new MS-documents from a template?What's wrong with using MS Office apps to do that for you? You could enhance you cloning component to use a template, rather than a blank document, if you really want to do it from UCM.

Automatic creation of Batch using mvt type 311

when i am trying to transfer material from one storage location to another using mvt type 311. the system is not creating the batch automaticcally.
I have already maintained allthe basic configuration required for this.even in IMg ->logistic general->batch management---->creation of new batch in this path also for mvt type 311 i mainatined (automatical/manual without check)batch creation.but still the system is not generating the new batch.
Can anybody help in this issue.
Thanks in advance

Hi,
When you do transfer postings, SAP will set the batch number same as the one from which you are issuing the stock. To avoid this you can set the creation of batch to B (Automatic/ Manual with check in user exit)
You need to use following user exit at batch creation
EXIT_SAPLV01Z_001
EXIT_SAPLV01Z_002
Hope this helps, reward if useful,
Best Regards VS

Automatic Creation of PR using 59

Hai,
I have created on PR 1200000585(Account category K & item category D).
Then converting(me59) this PR to PO.
While doing I am getting the following mesage "No suitable purchase requisition found)
I am not using any material, using only material text as "Consultant" in my PR.
With Regards,
Jaheer,Saudi Arabia.com

HI,
Prerequisites are
The system selects only those requisitions for automatic PO generation for which the indicator Automatic purchase order has been set for both the material and the vendor.
It can only generate purchase orders from requisitions to which a unique source of supply has already been assigned.
Refer this link
http://help.sap.com/saphelp_47x200/helpdata/en/75/ee11e655c811d189900000e8322d00/frameset.htm
Optimised Purchasing - Automatic Generation of POs from Requisitions
Thanks & Regards,
Kiran

Rule usage in Document template creation

Dear all,
In our scenerio,I am using document template(TS) creation step in WS.
In this task I have created different word document templates.In my requirement based on the user, any one of the document template should come for creation.(not all the document templates).How can I do the config for that?Does it work,suppose the task is assigned with a Rule(The template is in creation mode)?

Hi Srini,
Use of background step indicates that it is additional step prior to your Document template. Do the processing what you were supposed to do in rule , get the required results from this step , store them in workfow container elements and Use them in your Document for template step.
Regds,
Akshay

Automatic creation of billing documents

Hi all,
i want to automate creation of billing document for all the deliveries for which PGI done.
i think we have to define a job which will call VF04.
my question is when we do VF04 manually, we have to give selection criteria like sales org etc and then it displays the list of all the deliveries and then we have to select the deliveries and press collective billing/individual billing.
so when the batch job calls the VF04, how all the deliveries are selected and the selection criteria taken into account by the batch job,
regards
sachin

hi,
thanks for the reply.
my mian question was when the batch job calls the VF04 and the slection criteria is filled using variants, then the list of deliveries is called up by VF04. my question is how will the batch job select all the deliveries for invoice creation beause whn we run the VF04 witout bathc jb ,we need to select the deliveries for billing (either collective or individual)
reards
sachin

Using a PDF as a Document Template in SharePoint 2010: "New Document" icon and action

Hi,
I have to create a document template in SharePoint 2010 using a PDF. After much searching I have learned to install Reader on the SharePoint server to bring in AcroPDF.dll
and set the OpenControl for PDFs in DOCICON.xml to be "AdobeAcrobat.OpenDocuments".
After taking these steps I can check PDFs in and out of SharePoint, and edit PDFs as I would edit an MS Office document.
However two problems remain with creating new documents based upon a PDF document template.
1) The PDF icon does not appear in the New Document dropdown. This makes sense since I never referenced a 32x32 icon in the SharePoint config files. Where would I place the icon image file and which configuration file would I edit to use that image file, and how?
The last three document templates are PDFs.
The second problem I face is that when I click one of the document templates above that is a PDF, nothing happens. I have tried this with Acrobat installed on both the client and the server. It would be preferable to insert a copy of the PDF document used as a template without having to use Acrobat at all.
Is there any resolution to either of these problems?

According to what i found the image needs to be 16x16.
See if this works.
Edit the DOCICON.XML file to include the PDF icon
In Windows Explorer, navigate to C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\TEMPLATE\XML
Edit the DOCICON.XML file (I open it in NotePad, you can also use the built-in XML Editor)
Ignore the section <ByProgID> and scroll down to the <ByExtension> section of the file
Within the <ByExtension> section, insert a <Mapping Key=”pdf” Value=”pdficon_small.gif” /> attribute. The easiest way is to copy an existing one – I usually just copy the line that starts <Mapping Key=”png”… and replace the parameters for Key and Value (see image below for example).
Note: Do not take shortcuts and copy/paste from here. 99% of problems with PDF icons not being displayed are due to errors made in the DOCICON.XML file
Save and close the file
Source:
http://www.sharepointsharon.com/2010/03/sharepoint-2010-and-adobe-pdf/

Corrupt document gets created in document library with document template using createlistitem workflowaction in visual studio workflow for office 365 solution

Hi,
My requirement is to create a document library associated to a custom content type with a document template associated. Also I need to create a document based on the template in this document library when a new item is created in another list by taking the
reference ID of that new Item , I need to create the document with the name appended by ID. I need to do all this deployment using WSP.
I have created document library with document template associated to content type by following instructions in below stated blog :http://blogs.msdn.com/b/chaks/archive/2011/05/19/deploying-a-document-template-file-in-content-type-in-a-office365-sandboxed-solution.aspx
This works perfect for me.
However, there are few observations, when going to Document Library > Library Settings > Advanced Settings > Document Template section - doesnt shows the Edit template link. When tried to look at the value for the document template using view source
, it is giving me /Lists/MyDocsListInstance/Forms/template.dotx instead of the actual template file uploaded.
Ignoring the above observation, when I am trying to create a sandbox based workflow in visual studio to create document in document library when new item is created in another list, I provide the ContentTypeID as the ID associated with the document library
with template.
It creates the corrupt document at end of workflow.
I have tried using .docx instead of .dotx files for workflow as per solution provided in some of the post but it isnt resolving my issue.
Any help is much appreciated.
Regards,
Krutika

OK, I am going to throw out a lot of ideas here so hopefully they get you closer to a diagnosis. Hang on :)
Does it happen to work for some users but not others? If so, try logging in on the "good" computer with the "bad" username. This will tell you if the problem is related to the end-user's system. Also, once the user downloads a document
successfully can they open and work on it in Word? Also, does the document library have any custom content types associated with it or does it just use 'Document'?
I notice that there are other folks on the web that have run into this same problem and the similarity seems to be that they are either on SharePoint 2007 or have upgraded from 2007. Did this doc library start out as a 2007 library?
What you might want to do is this: Make a site collection from scratch in 2013 (or find one that you know was created in 2013). Choose team site (or whatever you want) for the root web and set up the security the same way you have it on the malfunctioning
library. Now, use windows explorer to copy and paste some of the documents to the new location. Be sure you recreate any needed content types. Now test it from the troubled user's computer.
I'm thinking there may be something that is different about the library since it was migrated through various versions and updates since 2007. I've sometimes found that there can be problems (especially with user profiles but that's a different story) with
things that go through this evolution.

Our organization uses an Oracle database hosted on a Unix platform and one of our data processing outputs is a "stuffer" document that has a barcode, and Unix jobs automatically send the document to a printer. Is there a way, or does Adobe have a produc

Our organization uses an Oracle database hosted on a Unix platform and one of our data processing outputs is a “stuffer” document that has a barcode, and Unix jobs automatically send the document to a printer.
Is there a way, or does Adobe have a product or solution, to create a PDF version of the document including the barcode, before it’s sent to a printer?

What format is the document that is printed? Or what technology is used to format the printer? There isn't a standard way of doing things in Unix.

Configure the automatic creation of accounting document while billing

Hi,
Could you telme where to find the customization where you configure such that
triggering of automatic creation of accounting document takes place during billing itself.
Regards
anil.

Hi Anil,
In VOFA Document type in General contrlo is related to Accounting Document.If it is blank the system Automatically pics RV as accounting Document.
If posting Block is Ticked then Automatic posting will not happens.
You need to pass to Accounting in VF02 and release for accounting(Green Flag)
Regards,
Reddyy

Backgorund job for automatic creation of billing document

Dear All
Could you advise me on how to set up a bacground job for automatic creation of billing document?
Thanks and regards,
Sylwia

In standard, you cannot generate automatic billing but you can set date and time so that you can generate invoices at the specified time in bulk. The TCode to achieve this is VF06.
thanks
G. Lakshmipathi

Bacground job for automatic creation of billing document

Dear All
Could you advise me on how to set up a bacground job for automatic creation of billing document?
Thanks and regards,
Sylwia
Edited by: S. KOWALSKA on Jan 12, 2009 10:12 AM

Dear Sylwia
Please dont post the same question in multiple threads. You are receiving feedback in the other forum. Check this link
[Backgorund job for automatic creation of billing document |Backgorund job for automatic creation of billing document;
thanks
G. Lakshmipathi

Automatic creation of billing document

Hi all,
i want to automate creation of billing document for all the deliveries for which PGI done.
i think we have to define a job which will call VF04.
my question is when we do VF04 manually, we have to give selection criteria like sales org etc and then it displays the list of all the deliveries and then we have to select the deliveries manually and press collective billing/individual billing.
so when the batch job calls the VF04, how will the batch job tells VF04 to select all deliveries and generate the invoices.
regards
sachin

Hi Sonu,
Go to VF04 and provide the inputs in the selection screen. Now save this as a variant.say ZZ_INV_DUELIST
After saving the variant, find the program name of the tcode VF04. This can be found by going to System----Status in the menu. The resultant screen will have the program of the tcode VF04. Lets say it is BILLDUELIST
Now go to SM36. Give some name for hte job name and click Step button
Here you have to give the program name(BILLDUELIST) and the variant name(ZZ_INV_DUELIST). Here you can also configure whether the job should run immediately or in some schedules.
Once this is done, you can create a delivery and then run this program in SM37. Now you can see the log of this program. It will tell you that the invoice is created
Hope this helps

Can u create a fill-in document template usig apple iPhone pages? If it is created on ms word, can it be used/edited on pages? Thx

Can u create a fill-in document template usig apple iPhone pages? If it is created on ms word, can it be used/edited on pages? Thx

Hi,
If you want to add fields to a list, as you have written your form in JavaScript, you can take consideration of using JavaScript Client Object Model to add/delete fields dynamically.
How to: Create, Update, and Delete Lists Using JavaScript
http://msdn.microsoft.com/en-us/library/office/hh185005(v=office.14).aspx
If you want to achieve it with Form7, it is recommended to post the question to its forum to get quick and confirmed answer.
Thanks
Patrick Liang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Patrick Liang
TechNet Community Support

Automatic Creation of Documents using Document Templates in UCM

Similar Messages

Maybe you are looking for