Automatic define academic scale in booking process

I want the system automatically define the academic scale setting in evaluation infotype of module (1710) in booking process.
And I found this information from IHE103.
u201CWhen you enter a grade for module appraisal, the scale which defines the format of the grade is taken from the scale defined in the booking relationship or it is inherited from the Evaluation infotype (1710) of the module or program of study:
u2022Starting from the program of study (SC) and following to the module (SM).u201D
I think it is possible to solve this requirement by using standard configuration. Could anyone suggest me how to config the IMG to support this requirement ?
Thank you in advance.
VC.

Hello cha,
If the academic scales are defined at module level i.e., in module evaluation infotype, the same scales will be inherited to the module booking and appraisal. We also have the provision to define a different scale in module booking,  in such a case, this will be used in appraisal. 
If no scales are maintained at all in module 'evaluation' infotype and during module booking, the scales defined in img activity ' define standard scales ' will be used.
If your requirement is to use only the scales defined in module ' evaluation ' infotype, then u can leave the 'scale ID' field blank during module booking process, then the scale ID defined at module level will be inherited though not displayed in booking dialog.
Hope it clears
Regards,
Sravan
Edited by: Sravan on Mar 10, 2009 8:56 AM

Similar Messages

  • Define a partially linear quantity scale in SLCM (Academic Scales)

    Hello,
    I'm quite familiar with defining academic scales, but I wonder how to define the intervals for a partially linear quantity scale?
    For example, I like to implement the scale 1,0 (Best) / 1,3 / 1,5 / 1,7 / 2,0 / ... / 4,7 / 5,0 (Worst)
    I inserted the following data in the corresponding customizing activity.
    Base Value ¦ Lowest Value ¦ Highest Value ¦ Intervall
    50.000,00 ¦ 5,000 ¦ 1,000 ¦ 0,1
    (System Scale is set to 60 000)
    But how can I define, that no one enters the mark 1,2?
    Thanks in advance
    R. Seidler

    Robert,
    You should set up such a scale as a 'Quality' scale instead.  Normally the 'Interval' can be used to control the entries in a linear scale, but it seems that your intervals might be irregular, so a Quality scale is needed instead.  There, you just explicitly enter the allowable values.
    Michael

  • Process for defining of scales in pricing

    Hi,
    please let me know the process for defining of  SCALES IN PRICING??
    Thank you in advance,
    SAIKRISHNA.V

    Hi,
      When we create a condition record for a pricing element then we can define a pricing scale..
      Refer these links which gives clear information about scales in pricing
    http://help.sap.com/saphelp_46c/helpdata/en/93/7432c4546011d1a7020000e829fd11/content.htm
    http://help.sap.com/saphelp_46c/helpdata/en/93/7432d1546011d1a7020000e829fd11/content.htm
    http://help.sap.com/saphelp_470/helpdata/en/64/7836b39c8911d199aa0000e8a5bd28/frameset.htm
    Thanks.

  • Issue in the Academic Scales for Campus Management

    Hi All,
    When I use the quality scale A  to E , it works fine without any problems.
    But when there is a H or O grade [ So H and O will come after E where H is my top grade] ,and  the system automatically calculates in an ascending order which will not suit my requirements. 
    It would be highly appreciable if anyone would help me in this issue .

    Hi Gajalakshmi,
    For the system to work properly,you need to give the correct values in IMG in the nodes Academic Scale -> set system scale & set up academic sclaes.You might have done this but check once more.
    Use the scale.doc given in help.sap to determine the correct base value.This excel file is of immense help.Once done,give the values for A to O in the 'scale values' coloumn while creating the academic scales.It should work in the normal course.Try this and in case it still causes problems ,revert....probably trying to solve this issue,we might come up with new findings

  • Sap hr problem in defining pay scale salary ranges

    hi,
    please someone help me
    i am trying define pay scale salary ranges
    through
    img -> personal managment -> personal administration ->
    payroll data -> basic pay -> define pay scale salary ranges
    when i try to define pay scale salary range on salary margins window curreny field is greyed out so how to enter currency
    i want to enter INR as i am working on 40 india

    Dear Aparna,
    For your first question:
    Normally currency settings are done by FI consultant & also currency always in anywhere has to be defaulted. Just cross check i think some where you did the mistake mainly in payroll we will manually maintain currency in only one table "V_T510F_B" (This is table where we will maintain manually)
    For your second question:
    If your working on Implementation project it's not like where you will prepare questions and get answers from client
    1. First you need to get AS IS document from the client & need to understand their business process.
    2. According to that you will have to prepare one draft BBP then has to be shown to client.
    Major challenges are
    1. Finding PA & PSA.
    2. Finding grouping Esg grouping & PSA grouping.
    Ur's Mohan

  • Appraisal population automatically defined

    Hi experts!
    In the project I work, appraisal population must be automatically defined. For each employee the first appraiser is the line supervisor and the second appraiser is the first appraiseru2019s line supervisor (first appraiseru2019s upper hierarchical level). In case there is also a functional (u201Cdotted lineu201D) supervisor, he sends written feedback to the appraisers. How can I define this appraisal population automatically?
    I tried to use the program RHXHAP_APP_DOC_PREPARE but this program works only with chief position as appraiser.
    Thanks you in advance,
    Vana

    Hi Vana,
    There are multiple ways to do this?
    Firstly ru familiar creating a template and having the template flow in the org unit the way you want ?
    - well here's what you need to do
    Once you Have created a template:
    In the processing Tab of the template- Apprisal document creation check = Unlimited Appraisal Documents
    This will let you use unlimited appraisal document of the same template.
    At the status flow Tab:
    There are status and substatus of the template which decides the flow of the template within the org unit .
    You need to select the each status and select the push button, Person Authorised, Target status, Next status  and Workflow event .
    On selecting the workflow event the system will have the template flow in the direction you like.
    as a standard functionality there are 2 level workflow already available.
    Any workflow event you choose for the appraiser will be directed to the appriaser you choose once the template is released and ready to use. The appraiser is always the first level manager of the employee.
    The Higher level manager is the appraiser's manager as per mentioned in the org structure.
    This can give you some idea on how to get started.
    To configure the colums, push buttons and sub-status you need to right click on Category Group / Category/Template which ison top of the Personnal Appraisals - Select Basic Settings to have your requirements set.
    You also need link the events for each of the workflow events- you can find this is SPRO.
    Let me know if this helps.
    Regards,
    Regi Alex

  • Automatic Payment Programme for multiple vendors process

    Hi SAP FICO Experts,
    Please send Automatic Payment Programme for multiple vendors process
    Step by step
    Regards
    Maran

    Hi,
    You need to follow same process.
    Regards,
    Tejas

  • Automatically adding contacts to Address Book with Mail?

    Hello all,
    This is my first post in the Apple Discussion forum, but I'm a happy Mac owner since July 2007. Here's a question I have; I searched to see if a similar topic appeared in previous discussions, but none turned up.
    In Microsoft Outlook (on my work PC), I can set it up so that anytime I reply to an e-mail address from somebody new, the contact is automatically added to my address book. Is there a way to set that up with Mail and/or Address Book?
    I was going through Address Book and noticed some VERY old contacts, but I know for some of them, I have more recent e-mail address. I hope I don't have to manually add all of them!
    Thanks in advance for your help!
    All the best,
    MARK

    Hi Mark, and a warm welcome to the forums!
    Sadly, I don't know how to do it for received Mail, but ones you've sent to can be done in Mail. Select Window Menu item>Previous Recipients, press Command-A when the new window appears, and then click Add to Address Book, then in Address Book>Card Menu Item, select look for Duplicates.

  • Automate the EAR creation and deployment process

    Hi,
    I am trying to automate the EAR creation and deployment process. I am following this approach - http://www.oracle.com/technetwork/articles/adf/part4-098813.html
    In this approach we use pure ANT without OJDeploy. I am able to Create the EAR file but while deploying to weblogic server manually I get the attached error.
    Error is - java.lang.ClassNotFoundException: javax.faces.webapp.FacesServlet
    I would like to know, Is this the best practise to automate the EAR Creation and Deployment Process? If not, Please provide me some other best approach.
    Thanks in Advance.
    Regards
    Balaji S

    Balaji,
    I am the author of that article.
    At the time I wrote the article, ojdeploy was not working properly - however, the bugs that I noted at the time have been fixed. If I were writing the article today, my strong recommendation would be to use ojdeploy.
    If you insist to use the pure ANT (no ojdeploy) approach, I'd debug your issue this way:
    1). Generate the EAR file using the deploy option from the application navigator in JDeveloper. Deploy that EAR file to your WLS server and test to ensure it works. A note that if you are creating an ADF app, you must deploy the JRF to WLS first.
    2). Once the EAR from JDev is working, use a tool such as WinZip to expand the JDeveloper-generated EAR file and your ANT-generated EAR file. Compare the two. If you find differences, fix the ANT scripts so that they are the same.
    John

  • How do you define graph scales live?

    Hello,
    I am having an issue with a simple VI I am trying to create that displays test data.
    A little background on the setup:
    I have an Agilent 34970A data logger recording thermocouple data every 30 seconds which gets appended to a .csv file.  My VI opens the data log; reads the contents; manipulates the data; and displays the data on a mixed signal graph.  I have one main loop that reads in the data every 30 seconds and another loop inside the main loop that completes approximatly every second to allow changes made to scale controls to take effect so the user doesn't have to wait too long.  Because the data logs are allowed to become very long (logs are stopped and re-started daily) it is necessary to allow the user to define, at minimum, the X scale as it is usually the case that the user only cares about what is happening in the last hour or so.  The snippet below shows the portion of my block diagram for displaying the data and the user control of the scales.  
    The problem occurs when the user defines custom scales using the controls shown below.  The graph updates as desired however every time the inner loop completes the graph gets refreshed with the default auto scale values before getting set again to the custom scale values causing the graph to "Blip" once a second which is distracting and silly.
    Does anyone have any suggestions for me?
    Thank You,
    Ken

    Are the axes set to autoscale? In this case they will autoscale whenever data is written to the terminal.
    LabVIEW Champion . Do more with less code and in less time .

  • How to automate selective deletion of ods in process chain

    Hi,
    How can we automate selective deletion of ods in Process chain. I tried with the proceedure. Using T-code "delete_fact" I gave selection parameters and Name of the program and saved this as variant and gave the same program and variant in Process cahin. But it is not deleting data. So plz guide me whether I have missed anything in this proceedure.

    Hi purushottam,
                           you have to give to program variants in the process chain for data deletion to take place. in the first program variant include the rsdrd_delete_facts as program name and in the program variant give a variant for your infoprovider selection.
    Now again select another program variant and include the name of the program which you get after selecting the infoprovider name and  the generate selection program  option in the "program for deleting selected entries from the data target" screen " and press execute.
    again give another variant for your field selection.
    now try execute the process chain.

  • Assigning the academic scale to the assessment

    Hallo everyone,
    I have assigned the academic scale to the assessment in the infotype 1767 that is different by module scale. Then I have created scheduled assessment for this assessment and the student is registered for this created scheduled assessment. 
    I used online-grading through SE80-Package PMIQ_EXT_IAP- PIQ_APPR_SELF_SERVICE_APP, and there it couldn't take the scale of the assessment.
    How can I grade my assessments with different scale?
    Thanks in advance.
    Best Regards
    Ayse

    Hi Rob,
    First of all thanks for your answer,
    I checked what you said, unfortunately it still doesn't take the assigned scale from assessments. Actually, my customer want to grade modules on the different way.  The top appraisal type of module must be A+/- scale, but the rest of all appraisal types must be 1-100 scale, because of this I thought if I  have assigned 1-100 point scale to the appraisal types through assessments and business event types except top appraisal type, it would  be done.
    Do you have any suggestions for this situation?
    Best regards.
    Ayşe

  • IPhoto project will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process. Christmas gift, really need to get this done, have worked MANY hours on putting it together. Please help!

    Iphoto book will not upload even in safe mode when trying to buy book, any suggestions on how to complete the "BUY BOOK" process?

    Make a temporary, backup copy of your library if you don't already have one (Control-click on the library and select Duplicate from the contextual menu) and  apply the fix below:
    Fix #1
    Launch iPhoto with the Command+Option keys held down and rebuild the library.
    Since only one option can be run at a time start with Option #1, followed by #3 and then #4 as needed.
    After each run thru the repair process see if you can create a PDF file of the book as described in this Apple Document: iPhoto '11: Preview a book, card, or calendar before you order or print it. If you can try ordering the book.  If you can't finish trying all of the otpions and then boot into Safe mode and try there.
    OT

  • I recently got a mac book pro and uploaded my pictures and videos from my iphone 4 to the mac book. If I delete these pictures and videos from my phone will they automatically delete from the mac book?

    I recently got a mac book pro and uploaded my pictures and videos from my iphone 4 to the mac book. If I delete these pictures and videos from my phone will they automatically delete from the mac book?

    No.  The data that you downloaded from your iPhone will remain on your MBP.
    Ciao.

  • Can you turn off the automatic guide grids in Aperture books?

    Can you turn off the automatic guide grids in Aperture books?

    Yes you can do this - either the way you're already doing it by editing the published content or by changing the source code in the template itself.
    I won't get into the details here cuz I have all this documented here:
    http://web.mac.com/sboben/iWeb/11Mystics/
    See the iWeb Templates page. In short, what you have to do is show package contents for the iWeb app, open the Resources folder, open the .lproj folder for YOUR language, likely english, open the Templates folder and then one by one, for each page-type folder you find in there, you have to show package contents for your chosen template, unzip the index.xml.gz files, find the hyperlink settings in the XML, turn off the underline setting, save the file again and rezip it. Then any NEW pages you build will not contain underlined links. It sounds worse than it is.
    If you tell me which template you're using, I'll go look in the file and tell you how to turn the underline code OFF. But you should read my instructions at my site before you even try to do this - I outline some things you should know before even opening up those XML files.
    SB

Maybe you are looking for