Automatic estimation for previous MR

Hello all,
We need to bypass the standard estimation and to give other estimation in case we have a MR that has a MR after it with EABL-ABLSTAT equal to 1 or 4.
For example:
For some reason we want to give automatic estimation for MR at 01/01/2011, this MR (at 01/01/2011) has after it another MR reading at 01/03/2011 with EABL-ABLSTAT equal to 4.
How can we do it? I will appreciate any help.
Please pay attention that if there is no MR after the one that we want to estimate there is no problem to give our estimation. We used EXIT_SAPLELHR_002. But in the above scenarios we can't use the same use exit.
I will appreciate any help.
Thank you very much.
Hussam.

Hi Hussam,
As I understood your requirement, you have a open meter reading order on 01/01/2011 and you are receiving a read on 01/03/201 - so, you would like to estimate and enter read for 01/01/2011 based on the reading received on 01/03/2011.
If this is the case, this can be achieved using configuration where you need to activate Automatic Interpolation for a given Meter Reading Reason. Configuration path is SAP Utilities --> Device Management --> Meter Reading --> Meter Reading Order --> Order Creation --> Define Automatic Interpolation of Meter Reading Reasons
Let us know if you have any further questions.
Regards,
Avinash

Similar Messages

  • How to set up automatic payment for the purchase order

    Hi, All,
    I have one question how to set up automatically payment for the Rent Office purchase Order?
    There is the requirement from the client. They want to create one kind of purchase order for the Office Rent, then pay the fees in the certain time of every month to the vendor for the rent fees without any invoice. Whatu2019s the normal solution for this kind of purchase order? Is it ERS? Or something else?
    Please give me the details and business flow. Also please tell me how to setup in the SAP and T-code.
    Thanks in advance

    Either you can set up ERS or you can pay directly from the FI side.
    Prerequisites
    Evaluated receipt settlement must be flagged in the purchase order item.
    The vendor must be flagged as being subject to ERS in the vendor master record.
    The goods receipt must refer to a purchase order.
    Goods-receipt-based Invoice Verification must be defined for the purchase order item.
    A tax code must have been maintained in the purchase order item.
    The order price of the materials may not be an estimated price.
    If you flag a vendor as being subject to ERS, the system sets the ERS indicator as a default in each item when you create a purchase order for the vendor. You can prevent this happening for certain vendors by flagging the info record for the material and the vendor as not being subject to ERS.
    In Purchasing, you can delete the default ERS indicator in a purchase order item.
    Choose Logistics Invoice Verification ® Automatic Settlement ® Evaluated Receipt Settlement (ERS).
    The selection screen appears.
    You can use the following criteria to narrow down selection of the transactions to be settled:
    Company code
    Plant
    Goods receipt posting date
    Goods receipt document
    Fiscal year of the goods receipt
    Vendor
    Purchase order and order item
    You can define the selection criteria for the invoice documents by:
    Delivery
    Purchase order
    Purchase order item
    Goods receipt document
    Credit memo
    Invoice
    Currency
    Choose  Execute.
    The system issues a log for Evaluated Receipt Settlement, which displays the following:
    Settled
    In line with your selection criteria, the system displays all the order items that were settled (or if you are working in test mode, which would have been settled).
    Could not be settled
    In line with your selection criteria, the system displays all order items for which ERS is defined but could not be settled. It also lists the reasons.
    If the system reports being unable to invoice a transaction, you should exclude the transaction from ERS to avoid it being included in the log the next time ERS is run.
    Select the item and choose Exclude from ERS.
    The system also generates and possibly sends a message to inform the vendor(s) about the transaction settled, depending on the settings in Customizing.
    You can display the following environment information for the order items selected. To do this, choose Goto ®:
    Display purchase order
    Display invoice
    Display material document
    Display long text

  • How do I continue to save for previous version?

    Hello. I am currently using LabView 9.0 32-bit, Windows 7. Unfortunately, my university uses Labview 8.6.1 32-bit, Windows Vista Business. First, I tried to open my VI's which I started at the University and modified on my machine back on a university machine. I received an error stating that the files were saved with a newer version of LabView and could not be opened. I went home, and opened the VI's again and used File > Save for Previous Version. This is okay, except it forces me to create a new destination folder. When I close LabView and open the VI's from this destination folder, they open up automatically with an asterisk to indicate the files have changed and require saving. Obviously this is automatically converting my 8.6 files to 9.0. This is very frustrating.
    How can I force LabView to stick with the version that the files were created or saved as? If I attempt to save the "asterisked" files for previous version, it refuses to let me. Thank you for your time and consideration.

    You must be doing something wrong, or perhaps Windows 7 is interfering. Here's the step-by-step process:
    Launch LabVIEW 2009.
    Open an 8.6 VI. It should show up with an asterisk in the title bar.
    Make some changes.
    Select File -> Save for Previous Version.
    Verify that "8.6" is selected in the dropdown.
    Click "Save...".
    In the dialog click the "Save" button to accept the default of saving the VI into a new folder called "<VI Name> Folder".
    Close the VI. When asked if you want to save changes click "Don't Save".
    Check the timestamp on the newly created file in that folder.
    Open the same 8.6 VI again.
    Make some changes. 
    Select File -> Save for Previous Version.
    Verify that "8.6" is selected in the dropdown.
    Click "Save...".
    The "File name" textbox should have the same default name as previously. If you click "Save" Windows should move you into that folder, and the save dialog should remain open. The file listing should contain the VI.
    Click on the "Current Folder" button. You should get a dialog warning you that the operation will save over existing files. Click "OK" to continue. The VI will be saved as the previous version over the previous save that was done. To verify this, check the timestamp on the file.
    I just did the above on LV2009 running under XP just so I could get the button names correct.
    You can repeat steps 10-16 as many times as you want without needing to create a new folder.

  • ORD to AUC settlement for previous year

    Hi All,
    We have a scenario wherein some expense exists on the Internal order for 2014. The Asset fiscal year has been changed to 2015.
    While trying to settle the ORD to AUC for current year, we get a message to do the settlement for previous year.
    I checked the SAP notes, it recommended:
    1. To do a PRE settlment to Cost Center/receiver in 2014,
    2. Manual reposting of cost from the receiver to ORD in 2015, and
    3. AUC settlement in 2015.
    Please suggest if there is any other way to do it with/without opening the previous fiscal year.

    Hi Pankaj,
    Check the settle parameters of the order, have you defined settlement type as "periodic settlement" for the asset. If yes, add another line for full settlement for it. Then do settlement for 2015 with processing type as "Automatic", then system will post to 2015 for the asset.
    Regards,
    Mukthar

  • SQL Developer 2.1 Disable Automatically Check for Updates bug?

    Unchecking the "Automatically Check for Updates" under Preferences -> Extensions in version 1.5.5 to disables the prompting for proxy ID and password at SQL Developer startup. Unfortunately I am trying version 2.1 on Windows XP and unchecking this option under Extensions is having no affect. It is still prompting for proxy ID and password every time I start SQL Developer. This is extremely annoying.
    Is this a known bug with 2.1?
    Mike

    I get that prompt for a Proxy as well. If I can download SQL Developer 2.1 without a Proxy then why am I prompted for one when I am checking for updates?!?
    I have to uncheck the Proxy and uncheck check for Automatic Updates.
    Even if I tried to use the default proxy it does not exist (I tried pinging emeacache.uk.oracle.com and it just times out and there is no DNS record either).
    I have been able to finally get a few updates but still have problems with getting the JTDS and MySQL updates. I am wondering if there is a problem with Oracle's websites that are trying to be contacted to download these updates. I think Oracle's Check for Updates Wizard still has bugs that need fixing. I have had these problems not just with this new 2.1 but with previous versions as well.
    I hope Oracle fixes their buggy Check for Updates Wizard or the web sites that are being contacted for the updates because this is very frustrating.

  • Automatic popup for reason of rejection after async method

    Hello,
    How to get a <b>reason of rejection</b> popup after an asynchronous method?
    Currently I am using the standard <b>singlerelease</b> method of object type BUS2012 for the release of purchase order.
    Now once this order gets rejected the user wants an automatic popup for entering the reason for rejection and NOT as another workitem in his inbox for execution.
    Please let me know how can I provide this functionality in the current scenario. Also since the Previous method(singlerelease) is asynchronous “Advance with Dialog” does not work.
    Thanks and Regards,
    Anuj

    Hi Mikko/Anuj,
    Added to the FAQ, including techo details.
    Cheers,
    Mike
    3.16. How can I 'advance in dialog' with asynchronous tasks?
    This is unfortunately not possible as the very nature of <i>asynchronous</i> tasks contradicts the idea of 'advance in dialog', also known as <i>synchronous</i> dialog chains. The two main reasons for using asynch tasks are either that the termination can happen outside of WF, or to ensure that all database updates are complete. Both of these imply that there is an action happening outside of workflow (database updates can happen outside the user session after the transaction is completed). Since these happen outside the current dialog session, one would have to 'continue' another user's session in the current dialog, which is not possible.
    How it works on a more technical level:
    Asynchronous tasks use terminating events which live in the instance linkage tables (tx SWEINST). You don't normally have to touch instance linkages, the WF system creates these as necessary, and deletes it when a task completes.
    The main difference between instance and type linkages is that instance linkages have a key and are specific to one instance (hence the name), they are only triggered for the object with the same key. Like any other event they are passed on to the event manager who triggers the receiver (the task completion in this case) via RFC (user WF-BATCH). This is why it is theoretically impossible to advance in dialog - because the task completion happens in a separate dialog under a different user, quite possibly on a different server.
    Workarounds can include secondary methods (though they have their own restrictions), or redesigning your flow so that it uses a synchronous task instead e.g. by using a wait for event in a separate branch or creating a synchronous task instead.

  • Automatic popup for reason of rej after an async method

    Hello,
    How to get a reason of rejection popup after an asynchronous method?
    Currently I am using the standard singlerelease method of object type BUS2012 for the release of purchase order. Now once this order gets rejected the user wants an <b>automatic popup for entering the reason for rejection</b> and NOT as another workitem in his inbox for execution.
    Please let me know how can I provide this functionality in the current scenario. <b>Also since the Previous method(singlerelease) is asynchronous “Advance with Dialog” does not work.</b>
    Thanks and Regards,
    Anuj

    It does not work for asynchronous methods but works for synchronous methods. As per SAP the advance with immediate dialog should work for asynchronous methods as well.
    Below is an excerpt from SAP help.
    At runtime, after completion of a step, (= work item has status completed), the workflow system checks the following properties of the subsequent work item:
    •     Is it a dialog work item?
    •     Does the corresponding task refer to a synchronous method?
    •     Is the indicator Advance with dialog set?
    •     Is the actual agent also a recipient of this work item?
    •     Has the work item reached all of its requested starts?
    If the answer to all these questions is yes, the workflow system automatically starts execution of the work item.
    May be you should write a message to SAP. In the meanwhile you can create a synchronous method for the business object.
    -Kiran

  • Time estimation for WDA development

    Hi All,
    do anybody have some estimation for WDA development objects? i mean depending on critical level as Very Simple, Simple, Medium, Complex and Very Complex.
    please let me know how we can estimate the work on WDA devl. objects?
    if anybody have the documentation/tool on this please let me know. if possible please send the same on my email - [email protected]
    Regards,
    Chandra

    Hi Chandrashekhar Mahajan ,
          Based on my last 6 months experience I will say Time estimation for WebDynpro ABAP based on
    1)     Number of View
    2)     <b>Complexity of UI elements</b> involved in Development ( Take case if you want ALV rows with same content to be clubbed , or On click of alv change in Business Graphics element like Gantt  Chart )
    3)     <b>Complexity of Business process and Extent to which client want it to automate.</b>4)     another issues is Documentation of WD ABAP objects , as in case of WD ABAP object documentation approach entirely different from conventional ABAP documentation.
    5)     Understanding of client Business process , visualizing it and designing it in Web Dynpro context
    6)     How much<b> information you have about data you want put in context</b> and with which database tables , fields , R/3 servers  it has interaction.
    Regards ,
    Parry

  • Costing for previous periods.

    Hi Experts,
    Is there any way to do the costing run for previous periods.
    I would like to do std. cost estimation for 5th period, but now we are in 6th period.
    System giving message as cost estimation can't be saved for past period.
    CK075: Planning date is in the past -> cost estimate cannot be saved
    SKS

    Dear Seshagiri,
    It's the standard SAP'e bahaviour and there is no meaning in costing for a past date.
    Also in my understanding
    1.If your Costing Run date is some future date ,but the Costing Date from,Qty Structure Date,Valuation
    date is on system's date,then the system will allow to release the cost and the same can be checked
    under Planned Price,Standard price under Current Column in Costing 2 view.
    2.If your costing run date is current date & the valuation,Qty structure date is some future date,then the
    system will not allow you to release the cost.
    check and revert back.
    Regards
    Mangalraj.S

  • Automate OneDrive for Business 2013

    Can anyone refer any link or resource location to automate OneDrive for Business with SharePoint Online. I need to fetch the libraries already added to "OneDrive for Business", also allow from a custom screen to add new library or delete an existing
    library from "OneDrive for Business".
    Would appreciate any hint how I can create a desktop application for Windows 7 which will provide all functionality for OneDrive and add more (which is not in OneDrive tool - eg, check in menu, checkout menu, version menu etc.

    Please follow below links,  can be helpful for you
    http://support.microsoft.com/kb/2903984/en-gb
    Use the OneDrive for Business app in Windows 8
    Sync with OneDrive for Business or SharePoint Workspace
    Adnan Amin MCT, SharePoint Architect | If you find this post useful kindly please mark it as an answer.

  • Opening Balances for Previous Periods

    Hi Experts,
    There is a client requirement of entering opening balances for GL for previous periods before going live.
    eg it is required to have OB for 2006,2007 and 2008 before live transactions are entered into the system.
    Please enlighten on how to carry out this.
    Regards,
    Asap

    Hi Asap,
    You could only have one OB for one account.  If those OB for different years are for different accounts, it is ok.  Otherwise, you have 2006 OB only. You may create JE to get something like OB for 2007 and 2008.
    Thanks,
    Gordon

  • GR/IR Automatic Clearing for Different Business areas items

    Hello All,
         we have different business areas, and some times we create a PO for all business areas and invoice it in a specific business area
    in F.13 automatic clearing:
    for GR/IR account
    Documents with different business area cannot be cleared.
    any idea to solve this issue is appreciated,

    Thanks for your reply,
    I've tried such a solution with more parameters ( EBELN, XREF3 and EBELP)
    but in F.13 :
    - the document cannot be cleared when >>> selecting GR/IR account special process.
    if we treat GR account as a normal GL account, I mean without selecting GR/IR account special process.
    the document can be clear
    i want to be able to clear the document with selecting GR/IR field ( is it possible )
    and if it is not allowed, do we will face a problem by clearing GR account without selecting GR/IR parameter ??
    Many Thanks

  • How can I  remove my credit card from the automatic billing for my account?

    How can I remove my credit card from the automatic billing for my account?

    The following has instructions for changing iTunes payment method: http://support.apple.com/kb/ht1918

  • I refuse to pay for a one year automatic subscription for Cosumer report that was charged to my account today without me noticing. How can I cancel that and get reimbursed now?

    I refuse to pay for a one year automatic subscription for Cosumer report that was charged to my account today without me noticing. How can I cancel that and get reimbursed now?
    Patrick

    First turn off auto-renewing subscriptions:
    iTunes Store: Purchasing and managing auto-renewing subscriptions
    Getting a refund won't be as simple. For that you will have to contact iTunes Store Support.

  • I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I ppear to have been automatically enrolled for a 30 day free trial of Lightroom mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial I w

    I have just upgraded from Lightroom 5 standalone to Lightroom 6 standalone. I appear to have been automatically enrolled for a 30 day free trial of Lightroom Mobile and Creative Cloud. Reading the FAQ, it appears that after the expiry of the free trial, if I do not sign up and pay, I will only be able to view my pictures on the desktop but not edit them - surely this cannot be true. How do I un-enroll for the 30 day free trial of Lightroom Mobile and CC?

    When I was signed into Adobe (which was a requirement for installing the upgrade), Lightroom 6 told my at the top right corner that I had 30 days left of my free trial of Lightroom Mobile and Creative Cloud. In parallel with this forum posting, I am chatting with Adobe support. he is away to find out how to prevent any synching with Creative Cloud during the 30 day free trial. I do not think that Creative Cloud is an application that gets installed on your PC. I think Lightroom 6 has it built in, and can use it if if you are signed up to the Creative Cloud and Lightroom Mobile (which I am for 30 days)

Maybe you are looking for