Automatic Filling of same fields

Hello All I am new to this and I am trying to create a form on Lifecycle. The form I am creating has 3 pages and 2 of those are identical. The 2 identical pages have to have the same data in them. How can I get it set up so that when the uder inputs information on the first page that same info automatically fills in on the sacond page in the same fields. Thanks...

Set the binding tab on those fields to Global and make sure they have the same name.
Or you can programmaticaly push the values from the 1st fields into the 2nd ones. Use the exit event of the 1st field and this javascript code:
Field2.rawValue = Field1.rawValue;

Similar Messages

How to have a field automatically fill in another field when checked

Does anyone know if there is a way to have a field automatically fill in another field with a specific dollar amount when a field is checked.
I am doing a registration sheet for a charity event where we have to pay for each person that attends. I would like it set up so that when someone checks in the person at the registration table would just click the check box (E2) and then have it fill in the field next to it a dollar amount of $15.00 (F2) which would be owed to the place hosting the event.
Attached is a picture of the spreadsheet: example: persons checks off E2 and the amount $15.00 would automatically fill in field F2. I would then do this for each line and have the F column total the amount owed to the place.
I am VERY new to numbers and writing formulas so if you can be specfic with how to do the code would be greatly appreciated. THANK YOU!

please remember to post the actual solution (equation in this case) so others that are searching for similar items see the solution, not just
Got it, replaced 0 with '''.
Thanks
Jason

Removing or automatic fill the database field at login when using TWO_TASK

Couple of questions when using TWO_TASK on HP-UX
1. Is it possible to alter the login window, by removing the database field, as it is not needed anymore?
2. Is it possible to automatically fill the login window with the required database connect string?

Hello,
Are you sure this question is relative to the Oracle Forms product ?
Francois

Automatic fill/replace text field

Hello all,
In my document, I have a text block with the following:
Document: 770-00009                                                      - Static line
April 1, 2014 6:42 AM                                                     - InDesign system variable line
For single or dual switch installs                                      - Static line
For build # ${build_version}                                             - This line changes and need a way to automatically fill-in/replace the text, "${build_version}"
So, I am looking for a way to automatically replace ${build_version} with the current version number.
Is there a way to do this from InDesign, via CLI (don't think InDesign has one), via the .indd file, or perhaps at the PDF stage (although, at that point, it would have to be Linux based).
Thank you

This is in Safari?
Go to Preferences->Autofill and see the "Other forms" section. Choose "edit" and you can modify or remove the data. If you remove it, the next time you fill it should enter the right info. Go ahead and investigate each of the 4 options on the Autofill pane.

How do I edit suggestions Firefox makes to automatically fill in a field?

When I attempt to fill in a form, as I type,a Firefox will offer suggestions as to what to fill in. For example, the web form asks for a date. I want to enter 5/25/2011. As I have filled out this form before, Firefox offers suggestions of 5/25/2009, 5/25/2010, and 5/25/2011. I no longer will be entering 5/25/2009 or 5/25/2010, so I will not need those suggestions any more. How do I get rid of them? As it's annoying to have them constantly showing up. ( The same thing occurs if you make a mistake, for example, in typing an e-mail address. The mistake keeps showing up as a suggestion. )

*Click the (empty) input field on the web page to open the drop down list
*Highlight an entry in the drop down list
*Press the Delete key (on Mac: Shift+Delete) to remove it.
*http://kb.mozillazine.org/Deleting_autocomplete_entries

Automatically fill the same signatures

In my PDF form, there are multiple places where signature is required. Is it possible to cross-fill signatures where user just need to apply a signature once, and it gets automatically populated (may be as image) on the other signature fields.
Can someone help me ?
Thanks a lot.
Jing.

Hi
This is SDK related query. So Post your Question in this link [SAP Business One SDK|SAP Business One SDK]
Regards,
Sudhir B

[solved] ADF BC - Automatically fill in form fields

Hi all,
I think i just need pointing in the right direction. I am using ADF 11g BC.
Here is the case in EMP/DEPT terms. I click a row on the DEPT table, and click add employee button. A popup launches with a form. I want to have the DEPTNO and DEPTNAME filled in already based on the row that was clicked on. I currently am using createWithParameters when the button is pressed and am able to send in the deptname and deptno as parameters, i am just unsure of how to actually fill in those 2 fields of the form.
Any pointers/suggestions?
~Dan
Edited by: Dan Surkan on 25-Mar-2009 9:37 AM

I had that problem too recently. It seems the parameters table is disabled wrongly. I worked around that be manually editing the XML via the Source tab. Here's an example of a "Create with parameters" action with two parameters:
    <action IterBinding="XyzIterator"
            id="CreateWithParams" RequiresUpdateModel="true"
            Action="createWithParams">
      <NamedData NDName="XyzId"
                 NDValue="#{someBean.someValue}"
                 NDType="java.lang.String"/>
      <NamedData NDName="Year" NDValue="#{someBean.someOtherValue}"
                 NDType="oracle.jbo.domain.Number"/>
    </action>Bart

Little dots automatically fill the password field

On my iMac I have three accounts, mine, my wifes, and a guest account. When the system is at the login screen, if I click my icon to log in, the password field starts filling up with "characters" (dots) all on it's own. I have to hold the delete key, at which time it erases and I can then enter my password. But... This only happens if my wife was the last one to log in. If I had last logged in, no dots.
If I allow it to run like this for 5 or 10 seconds, it fills up with so many characters that it becomes time-consuming to get back to an empty password field.
Any ideas? Obviously, any sort of malware that could be running at the login screen would be bad, very bad.

Malware (not a virus) can't be running at login, because there is no access to system resources until somebody logs in.
Hi Kurt, I can't say why this is happening, though I agree it's extremely unlikely to be malware. But I disagree; the system is up and running well before login. A rootkit, or backdoor from a Trojan, for example, (not that I'm saying this is what is happening) would have access to system resources before login.
Seems related to the wife's user account. Only happens after his wife has logged in. I think it is very unlikely to be a Permissons issue. And, if it is related to his or his wife's user, Permissions repair wouldn't even touch that.
Just a guess, but perhaps this is coming from a corrupted cache. Might try running Applejack.
Download:
http://sourceforge.net/projects/applejack/
Article on using:
http://reviews.cnet.com/8301-13727_7-10334620-263.html?tag=mfiredir
It runs in single user mode. After installing (you won't see it in the Applications Folder) hold CMD-S at startup. You will get a black screen with MS-DOS like text. Just follow the prompts: type in "applejack AUTO" and it will run through the following:
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
You can also run tasks selectively and for specific users by typing in "applejack." After running in "AUTO," you can go back and run it again as "applejack," steps 3 & 4 only, for your user.
The first reboot will take much longer than usual, as it rebuilds caches. It may take several restarts to see the benefits. Because of the deep cache cleaning in AUTO mode some applications may tell you they are being opened for the first time.
NOT YET UPDATED FOR LION
(Adapted from post by BDAqua)

When my wife goes to login to Yahoo mail, my email Id and password automatically appear. How do I tell Firefox not to populate these fields with my id and passwords. Basically how do we not have firefox automatically fill in these fields.

When my wife was already login to our shared computer, I went into Yahoo email and told the computer to save my login and password. Now, everytime my wife goes to login to her Yahoo email my ID and Password are filled in. How do we have firefox not remember the Yahoo ID and Password for anyone?

When my wife was already login to our shared computer, I went into Yahoo email and told the computer to save my login and password. Now, everytime my wife goes to login to her Yahoo email my ID and Password are filled in. How do we have firefox not remember the Yahoo ID and Password for anyone?

Automatically fill in field based on data from table rows

hello,
Users in our organization currently have to complete a number of different forms when an accident occurs. I am creating a .pdf that combines these fomrs into one, with the first portion being a data input section where the user inputs the data and then this populates other sections (pages of the form) that can later be saved and printed.
The data input section contains subforms with tables. The tables have a row that has "add new item" and "delete this item" buttons. The rows have dropdown list fields.
I would like to create a field that will be automatically filled in with the values from the dropdown lists, including the values from the new rows that are added using the 'add new item' button.
Any assistance in this regard would be most appreciated. This is my first time on a forum, so I apologize if I have not been clear.
Thank you.

This is pretty complicated. You'll have to use scripting for this and I'll tell you how I'd approach this with JavaScript.
First of all you need to decide at what point you want to populate this field with the drop down selections. I think you have two options.
Option 1 - Automatically calculate this field each time a user makes a drop-down selection. It's possible that a user will enter data and then change a drop down value so you'll have to account for this.
Option 2 - Create an update button that users click to calculate this field. There is still a risk that users will change the value in the drop down after clicking update, so you would want to use scripting to lock those fields (e.g. make them protected) when the update button is clicked. You could then change the caption of this same button or have a second button that when clicked would unlock those drop down fields.
The other thing you need to do is figure out how to calculate this field. It seems to me you would probably build a string together that mixes text with the drop-down values. So your JavaScript would look something like this:
calculatedField.rawValue = "The accident occurred on " + table.row1.date.rawValue + ". It was witnessed by " + table.row1.witness1.rawValue +
" and " + table.row1.witness2.rawValue + ".";
When you're in the LC Designer JavaScript editor, hold control for the relative path to those fields and control + shift for the absolute path and then click on the fields whose values you want to access.
I hope this points you in the right direction!

Blanket Fill in for same field on multiple page form?

I have a form that is many pages long and it has certain fields that appear on each page... (ie Name, address etc)
Anyone know of a way for the user to fill in the field on page 1 and the other fields will automatically populate on the other pages in the form?

In version 5 (which is what I use and currently don't intend to upgrade) you have to write a script that locates the duplicated fields and then sets their value.
Essentially, you obtain the number of times it is repeated from the underlying form object and use that to do a loop, using the loop index to reference each occurance. You can also go through the complete collection of objects and when one with the same name is found, you would set its value. The first method is more efficient. In version 5, at least, you do have to recognize when the loop is referencing the source field and not update it or weird things would happen.

Automatic filling of 'confirmation control' field

Hellow!
I need to fill confirmation control field in schedule line in purchase order by default value '0004 - inbound delivery'. I have done it early samewhere in spro but now I can not found this customazing.
Could you mention the path/

Hi
Alternatively you can maintain it in Purchasing Info record at purh org level ( ME12). It will populate automatically during creation of PO.
Here you have control over vendor/Material combination.
Hope it helps
Karthik
Edited by: Karthik on Jun 28, 2011 11:09 AM

Automatically fill in field from first letter of another field

Hi,
I have a situation where i would like to fill in a field automatically, dependant on the first letter entered in another field.
Here's some examples:
1. Field one - A6805B Field two - 'UHF' (As A = UHF)
2. Field one - E1234C Feild two - 'VHF' (As E = VHF)
3. Field one - S5673D Field two - 'Error - No Frequency' (As S doesn't have an equivalent)
Can anyone help?
Cheers
Rob

Hi Rob,
You can do this by assigning the first letter to a variable and then testing that variable.
A sample is here: https://acrobat.com/#d=OoLUPLu1Qy1*8Uxz7*hG6Q
Hope that helps,
Niall

Automatically fill in an a text field after a selection from dropdown field in a acrobat form.

I have two fields. One dropdown menu field for employee name and one field for occupation (an text field). I would like to let a employee select his name and automatically fill in the text field with his occupation. So for example:
John---> Automatically fill in "Engineer" etc..
Thank you in advance!

See Programming List and Combo fields in Acrobat and LiveCycle forms by Thom Parker.
This is not simple programing, but it follows standard JavaScript programing standards.

Disc.base field automatically filling in FB60 or F-43.

Hi,
Why System automatically Post the amount in Dis.Base field, actually i maintain all parameters in vendor master record. (Ex: if i post transaction in FB60 that automatically fill the Disc.base field also.)

See the below
Amount Eligible for Cash Discount in Document Currency
Definition
Part of the invoiced amount for which cash discount is granted. The amount is always in document currency.
Procedure
During document entry, the amount qualifying for cash discount can be determined manually or automatically. The amount is determined automatically if no entry is made or a '*' is entered.
To determine this amount automatically, the system takes into account the offsetting items relevant to cash discount for the invoice item and the rules assigned per company code for processing cash discount and taxes.

Automatic Filling of same fields

Similar Messages

Maybe you are looking for