How to have a field automatically fill in another field when checked

Does anyone know if there is a way to have a field automatically fill in another field with a specific dollar amount when a field is checked.
I am doing a registration sheet for a charity event where we have to pay for each person that attends. I would like it set up so that when someone checks in the person at the registration table would just click the check box (E2) and then have it fill in the field next to it a dollar amount of $15.00 (F2) which would be owed to the place hosting the event.
Attached is a picture of the spreadsheet: example: persons checks off E2 and the amount $15.00 would automatically fill in field F2. I would then do this for each line and have the F column total the amount owed to the place.
I am VERY new to numbers and writing formulas so if you can be specfic with how to do the code would be greatly appreciated. THANK YOU!

please remember to post the actual solution (equation in this case) so others that are searching for similar items see the solution, not just
Got it, replaced 0 with '''.
Thanks
Jason

Similar Messages

  • Making a DFF field mandatory based on another field

    Hello All,
    We have a requirement where in we need to make a DFF field mandatory based on another field.
    example:
    DFF has two fields :
    Filed1 : values 'Email', 'Fax'
    Filed2
    If 'Email' is selected in 'Field1' then Field2 should become mandatory.
    Any inputs on this will be really helpful.
    Thanks & Regards,
    Satya.

    hi kumar3a,
    recently, i spent considerable amount of time wracking my brain on a similar problem. the nearest i came to a solution was when i used a forms personalisation. mind you, forms personalisation will not work directly on the DFF window, so it has to be approached in a roundabout sort of way.
    i got this information from an Oracle Support personnel - MOS Note 1078348.1.
    i would start with the flexfield segment as "not required", and then using Forms Personalization, i would make it "required". i would try to figure out how to establish a condition where the previous 'required' flexfield segment's value is checked to see if this 'not required' segment needs to be made 'required'. in theory, this should solve the issue. i gave up on it because the forms personalisation would need to cover WHEN-VALIDATE trigger event, and we had close to 100 validations going on through other preexisting forms personalisations, which rendered it near impossible to employ this method.
    best regards.

  • Automatic Filling of same fields

    Hello All I am new to this and I am trying to create a form on Lifecycle. The form I am creating has 3 pages and 2 of those are identical. The 2 identical pages have to have the same data in them. How can I get it set up so that when the uder inputs information on the first page that same info automatically fills in on the sacond page in the same fields. Thanks...

    Set the binding tab on those fields to Global and make sure they have the same name.
    Or you can programmaticaly push the values from the 1st fields into the 2nd ones. Use the exit event of the 1st field and this javascript code:
    Field2.rawValue = Field1.rawValue;

  • How to fill a field with after changing another field in a multi form?

    Hi,
    I have multi occurence form in which multiple record are showeds and/or added.
    One field is a dropdown field, after filling this field (selecting a value in the dropdown), another field needs to filled with the selected value.
    My problem is that only the first occurence is filled with the value of the selected dropdown, even when filling the dropdown field in one of the other occurences.
    I tried point to the other occurences but this was not succesfull
    See script
    So when a sparepart is selected from the dropdown sparepart, the field defectpart must be filled the selected sparepart, when I have multi forms (occurences) only the first occurence defect part gets filled with the selected parts, even when a sparepart from another occurence is selected.
    data.p1.spare_parts.spare_parts::change: - (JavaScript, client) -
    p1.spare_parts.DefectPart.rawValue =  xfa.event.newText;
    Can anyone help to solve this problem
    Thanks
    Christophe Van Mechelen

    hi,
    Your code is right, i dont know why its not working,
    try this,
    dropdown field in change event,
    var c = xfa.host.newtext
    textfield1.rawValue = c;
    (or)
    textfield1.rawValue = xfa.event.newText;
    by
    Parthi

  • Little dots automatically fill the password field

    On my iMac I have three accounts, mine, my wifes, and a guest account. When the system is at the login screen, if I click my icon to log in, the password field starts filling up with "characters" (dots) all on it's own. I have to hold the delete key, at which time it erases and I can then enter my password. But... This only happens if my wife was the last one to log in. If I had last logged in, no dots.
    If I allow it to run like this for 5 or 10 seconds, it fills up with so many characters that it becomes time-consuming to get back to an empty password field.
    Any ideas? Obviously, any sort of malware that could be running at the login screen would be bad, very bad.

    Malware (not a virus) can't be running at login, because there is no access to system resources until somebody logs in.
    Hi Kurt, I can't say why this is happening, though I agree it's extremely unlikely to be malware. But I disagree; the system is up and running well before login. A rootkit, or backdoor from a Trojan, for example, (not that I'm saying this is what is happening) would have access to system resources before login.
    Seems related to the wife's user account. Only happens after his wife has logged in. I think it is very unlikely to be a Permissons issue. And, if it is related to his or his wife's user, Permissions repair wouldn't even touch that.
    Just a guess, but perhaps this is coming from a corrupted cache. Might try running Applejack.
    Download:
    http://sourceforge.net/projects/applejack/
    Article on using:
    http://reviews.cnet.com/8301-13727_7-10334620-263.html?tag=mfiredir
    It runs in single user mode. After installing (you won't see it in the Applications Folder) hold CMD-S at startup. You will get a black screen with MS-DOS like text. Just follow the prompts: type in "applejack AUTO" and it will run through the following:
    Correct any Disk problems.
    Repair Permissions.
    Clear out Cache Files.
    Repair/check several plist files.
    Dump the VM files for a fresh start.
    Trash old Log files.
    You can also run tasks selectively and for specific users by typing in "applejack." After running in "AUTO,"  you can go back and run it again as "applejack," steps 3 & 4 only, for your user.
    The first reboot will take much longer than usual, as it rebuilds caches. It may take several restarts to see the benefits. Because of the deep cache cleaning in AUTO mode some applications may tell you they are being opened for the first time.
    NOT YET UPDATED FOR LION
    (Adapted from post by BDAqua)

  • Removing or automatic fill the database field at login when using TWO_TASK

    Couple of questions when using TWO_TASK on HP-UX
    1. Is it possible to alter the login window, by removing the database field, as it is not needed anymore?
    2. Is it possible to automatically fill the login window with the required database connect string?

    Hello,
    Are you sure this question is relative to the Oracle Forms product ?
    Francois

  • Disc.base field automatically filling in FB60 or F-43.

    Hi,
    Why System automatically Post the amount in Dis.Base field, actually i maintain all parameters in vendor master record. (Ex: if i post transaction in FB60 that automatically fill the Disc.base field also.)

    See the below
    Amount Eligible for Cash Discount in Document Currency
    Definition
    Part of the invoiced amount for which cash discount is granted. The amount is always in document currency.
    Procedure
    During document entry, the amount qualifying for cash discount can be determined manually or automatically. The amount is determined automatically if no entry is made or a '*' is entered.
    To determine this amount automatically, the system takes into account the offsetting items relevant to cash discount for the invoice item and the rules assigned per company code for processing cash discount and taxes.

  • Automatic fill/replace text field

    Hello all,
    In my document, I have a text block with the following:
    Document: 770-00009                                                      - Static line
    April 1, 2014 6:42 AM                                                       -  InDesign system variable line
    For single or dual switch installs                                      - Static line
    For build # ${build_version}                                             - This line changes and need a way to automatically fill-in/replace the text, "${build_version}"
    So, I am looking for a way to automatically replace ${build_version} with the current version number.
    Is there a way to do this from InDesign, via CLI (don't think InDesign has one), via the .indd file, or perhaps at the PDF stage (although, at that point, it would have to be Linux based).
    Thank you

    This is in Safari?
    Go to Preferences->Autofill and see the "Other forms" section. Choose "edit" and you can modify or remove the data. If you remove it, the next time you fill it should enter the right info. Go ahead and investigate each of the 4 options on the Autofill pane.

  • How to have mail server automatically cc all email for a user to other acct

    I have a user on my 4.9 Xserve who wants her email automatically send to another account. I set forwarding first, but her email client keeps asking her for a password (and hers doesn't work) and won't allow her to see past email. Is that normal? Anyway, I've shut off forwarding for now, and am wondering if it's possible to have it automatically cc'd to another account (send a copy, but don't interfere with her ability to manage the email in her normal account with an IMAP client). Any ideas?
    Thanks,
    Mike

    Be aware that you are about to enter the dark zone of Unix file editing. Once there, you may never want to come back. Your friends and relatives will spurn you and you will start to dress in dark clothes and listen to impenetrable music.
    You can also screw up your whole system... but hey, who wants to live forever
    If you have a skateboard, sit it on your desk, then switch off all other lights except for an anglepoise...
    In Terminal, cd to postfix directory, and just for interest, list the files already there...
    cd /etc/postfix
    ls -l
    You should see the main.cf one which you will edit later.
    Create the new recipient_bcc file using 'pico', one of the built-in text editors. This is the easiest to start with because it contains on-screen help. There are others, including 'vi' which I would normally use. You will prefix the command with 'sudo' which temporarily makes you the 'super-user' (root) and needs the admin password. So...
    sudo pico recipient_bcc
    Add the two email addresses, separated by a tab or space, on the left: the local email address, and on the right: the address to send copies to (BCCs). To edit existing text, use arrow keys. Save the file using ctrl-o, confirm filename, then exit (ctrl-x).
    For postfix to be able to read this as a database, you need to 'postmap' it...
    sudo postmap recipient_bcc
    To confirm, list the files and you will see the two new ones (ls -l).
    Before editing the main.cf file, make a backup copy of it...
    sudo cp main.cf main.cf.bak
    If you need to revert to the backup, you reverse the orig/target args...
    sudo cp main.cf.bak main.cf
    Edit the main.cf file (sudo pico main.cf) and either 'next page' to bottom or enter '^_' (ctrl + underscore char) then specify line number 999.
    add the line...
    recipientbccmaps = hash:/etc/postfix/recipient_bcc
    Postfix knows to use the postmaped .db file so you do not specify that one in the line.
    Save and exit file.
    Reload the postfix main.cf configuration file...
    sudo postfix reload
    Test it by sending an email to the user and watch the mail.log in Console app. You should see the BCC being sent to the other email address. If something has gone wrong, replace the main.cf with the backup, issue postfix reload, then try again.
    Once you have confirmed it working, dance around the room playing air guitar and give high-fives to any innocent bystander.
    -david
    Links...
    http://www.postfix.org/postconf.5.html
    http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/pico.1.h tml
    http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/cp.1.htm l
    http://developer.apple.com/documentation/Darwin/Reference/ManPages/man1/postfix. 1.html

  • Lookout: How to have the Client automatically print the alarms from the server process?

    Before we switched to using servers and clients, the server computer would print all alarms.  Now we have switched to having 2 servers and many clients.  We would like to have Lookout print automatically all of the alarms as they occure or reset.
    MWarner

    Lookout client cannot automatically print the alarm to printer. I'm sorry that lookout client doesn't have this feature.
    My suggestion is to set up the printer beside the server computer and print the alarms automatically by lookout server.
    Ryan Shi
    National Instruments

  • Document Library set "Title" field automatically equal to "Name" field

    Hi,
    Is it possible to make Title field in document library automatically fill up with File name field? 

    Three ways you could do this really.
    #1 - Write a custom event receiver using .NET
    #2 - Write Javascript on the list form to update the field
    #3 - Create a custom workflow that kicks in when new items are added or modified and that would set the field
    Nikolas Charlebois-Laprade Microsoft Certified Professional Software Engineer and Senior SharePoint Advisor http://nikcharlebois.com

  • How to assign value of one filed to another  field in reports

    Hi..
    How we can copy the One field value to another field nd how to use group by in query to generate reports.
    Reply...
    Thanks
    Neetu
    Edited by: Philip Eller on Jun 27, 2008 9:49 AM
    Edited by: Rui Pereira on Jul 8, 2008 5:26 PM

    Dear Neetu,
    If you would like to assignt he value of one field to another in PLD, you can try the following.
    1. You can link the two fields by using the property Link
    2. In the fomula field for one of the fields, just mention the name of the other field.
    For example
    You have two fields F_118 and F_180
    Scenario 1 :
    In the "Link" property of the field F_180,  choose F_118
    Scenario 2:
    In the "Formula" for the field F_180, write "F_118"
    For using group by in query, Once you have created a query with the "Query Generator" you can create the reports based on query through the "query manager".
    REgards
    Arshdeep

  • How do you output a field column depending on another fields value?

    when selecting a field in a query, how do you output it on its own column depending on another fields value?
    For example
    Select
    a.gross_vol as Gas_vol when a.Object_code = "GAS"
    a.gross_vol as Wat_Vol when a.object_code = "water"

    how do you output it on its own column depending on another fields value?Scalar subquery maybe?:
    michaels>  select (select ename from emp where empno = 7788) scott_ename,
           (select ename from emp where empno = 7839) king_ename
      from dual
    SCOTT_ENAM KING_ENAME
    SCOTT      KING 

  • When my wife goes to login to Yahoo mail, my email Id and password automatically appear. How do I tell Firefox not to populate these fields with my id and passwords. Basically how do we not have firefox automatically fill in these fields.

    When my wife was already login to our shared computer, I went into Yahoo email and told the computer to save my login and password. Now, everytime my wife goes to login to her Yahoo email my ID and Password are filled in. How do we have firefox not remember the Yahoo ID and Password for anyone?

    When my wife was already login to our shared computer, I went into Yahoo email and told the computer to save my login and password. Now, everytime my wife goes to login to her Yahoo email my ID and Password are filled in. How do we have firefox not remember the Yahoo ID and Password for anyone?

  • How do I edit suggestions Firefox makes to automatically fill in a field?

    When I attempt to fill in a form, as I type,a Firefox will offer suggestions as to what to fill in. For example, the web form asks for a date. I want to enter 5/25/2011. As I have filled out this form before, Firefox offers suggestions of 5/25/2009, 5/25/2010, and 5/25/2011. I no longer will be entering 5/25/2009 or 5/25/2010, so I will not need those suggestions any more. How do I get rid of them? As it's annoying to have them constantly showing up. ( The same thing occurs if you make a mistake, for example, in typing an e-mail address. The mistake keeps showing up as a suggestion. )

    *Click the (empty) input field on the web page to open the drop down list
    *Highlight an entry in the drop down list
    *Press the Delete key (on Mac: Shift+Delete) to remove it.
    *http://kb.mozillazine.org/Deleting_autocomplete_entries

Maybe you are looking for