Automatic Forwarding of Messages -SMIN_STD_MSG_DISPATCH

Hi,
In SMIN_STD_MSG_DISPATCH action definition in SMIN, i am trying to forward the message to 2nd or 3rd level support for BRFplus to rule AGS_ICT
(35000139).As mentioned in the the below Dolores Correa
Incident Management: Support team determination in Solution Manager 7.1
Bur i am not sure about PARTNER_FCT_TEAM,PARTNER_FCT_PROC field details .
whether i can get the detail ?
Also any other way to forward the message in 2nd level from BRF+.
Rg,
Karthik

Hi Karthik,
Check this:
workflow eye over solution manager service desk.
Thanks
Vikram

Similar Messages

  • Forward JMS Message

    Hi,
    I need to send a message to a MQ Queue and automatically forward that message to another MQ Queue, so the first queue acts like a proxy.
    This capability is available in MQ Series API but, I need to use only JMS api.
    Regards,
    arturo

    I think you have to clarify your question to get a useful answer. There are too many ways to interpret this question.
    If you are talking about sending a message to Queue1, where some client picks it up (does something) and sends it on to another destination, it sounds like you simply need to have the first client set the JMSReplyTo destination, and have the second client forward it to there.

  • How to forward support messages to SAP in non-working time automatically?

    Hi colleagues and Happy New Year!
    I have a question: how to forward support messages to SAP at non-working time automatically?
    Details:
    when a support message is created at working time it shouldn't leave my system, but when
    a support message is created at non working time, for example, on saturday night it should be sent to SAP automatically. Where in the system I can find the options to customize it to provide these requirements?
    Edited by: Helen Rudnikovskaja on Jan 3, 2009 12:36 PM

    Hi These 2 notes wil solve your problem,
    Note 1084744 - Problems with the automatic function "Send to SAP"
    Note 1225682
    Pls assign pts.

  • SAP Inbox messages automatically forwarded to SOST

    Hi,
    We are in SMR7.0 Sp7.
    We have scheduled the deadline monitoring job SWWDHEX and system is generating the message for latest end reached in the useru2019s SAP Inbox as a notification. We understand that the message from SAP Inbox can be forwarded to users email using the automatic forwarding settings through SO12.
    However we notice that an email is sent to the user through SOST/SCOT even though we have not maintained the SO12 settings.
    Is it standard SAP behavior that a SAP Inbox message is automatically sent to SOST? Or is there any other setting (other than SO12) , that enables the forwarding of SAP Inbox message to SOST? We would like to stop this automatic forwarding of SAP inbox message to SOST.
    Thanks
    Sukumar

    No. Forwarding is standard behavior. It is general behavior, This, you can see in normal R/3 also..
    If your problem is NOT resolved as i said, shout BASIS consultants. They will make it worked.
    Alert mechanism is different , in SRM 7.0, alert mechanism is given .
    Donot get confusion.
    Balaji.T.
    Edited by: balajit on May 10, 2011 1:55 AM

  • How do i set up my sons ipod messaging automatically forward to my iphone

    how do i set up my sons ipod messaging to automatically forward to my iphone

    You might try Group Messaging, but for that to work you would have to create a group that included every one your son talks too...  and those people would be able to see what you send to him as well.
    Another down side is some other parents might not take too kindly to you "listening in" to what their child says...
    Personally, and as a parent and grand parent, I think this is less about technology and more about relationships, responsibility for ones actions, and trust....  Just my $.02

  • Automatically forward messages

    Greetings,
    I get a bunch of emails that I need to forward to a coworker, and delete them when I am finished. Instead of doing each one manually, I was wondering if there is an automator way to do this. I tried creating filters, but the list of email messengers is always growing.
    I'm looking for a one button sollution, where I click one button and it just automatically forwards to my coworker. Any ideas?
    Ibook 1.2GHZ 12   Mac OS X (10.4.6)   Also own a PC

    Is there an identifying feature in the mails that would allow the use of a rule? Do you need to read them before forwarding?
    AK

  • What is forwarded when " as in-line text" is selected in the drop-down box for forwarding a message. i.e. are attachments forwarded?

    What is forwarded when " as in-line text" is selected in the drop-down box for forwarding a message. i.e. are attachments forwarded with the message or not?

    Some websites require a special client certficate for access. If you don't have that certficate, you'll have to contact the site operator to find out how to get one.
    Sometimes the problem is caused by a web server that is configured to request an optional client certificate. Safari treats the request as mandatory. In that case, other browsers such as Firefox and Chrome may be able to connect to the site, because they ignore the request.
    The first time you were prompted for a certificate, you may have clicked through a dialog that requested access to the Apple certificate in your keychain that is used to secure the iMessage service. In that case, you may be able to regain access to the site in Safari by doing as follows.
    Back up all data.
    Double-click anywhere in the line below on this page to select it:
    com.apple.idms.appleid.prd
    Copy the selected text to the Clipboard by pressing the key combination command-C.
    Launch the Keychain Access application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Keychain Access in the icon grid.
    Paste into the search field in the Keychain Access window by clicking in it and pressing the key combination command-V. An item may appear in the list of keychain items. The Name will begin with string you searched for, and the Kind will be "certificate."
    Delete the item by selecting it and pressing the delete key. It will be recreated automatically the next time you launch the Messages or FaceTime application.
    The next time you visit a site that prompts for an optional client certificate, cancel out of the prompt. You may have to do this several times before the server stops asking.
    Credit for this idea to Christian Braukmueller of SAP.

  • Allow automatic Forward in Exchange 2007 and 2010 - Query

    Hi Team
    In my Test environment, we have been disabled the functionality of "ALLOW AUTOMATIC FORWARD" in global level in default remote domain 
    so that users cannot set an auto email forward to the external email address  from the outlook rules
    so, if an exchange administrator enable the transport rule in hub server  for one particular mailbox with particular subject  to be re-direct to external email address (Mail Contact),  will it work? as ALLOW AUTOMATIC FORWARD is disabled
    in global level setting ?
    Will email with particular subject reach out to the external mailbox like gmail.com, yahoo.com..etc

    Hi,
    The Allow automatic forward setting for remote domains
    applies only to client-side forwarding using mechanisms like Inbox Rules. For instance, if a user creates a rule in Microsoft Outlook to automatically forward mail to an external email address, the default setting (for address space *) doesn’t allow
    it. Any server-side email forwarding configured by an administrator is not impacted by this setting. In other words, this configuration on remote domain will not affect the transport rule.
    And based on my experience, there is no additional load to HUB server caused by transport rule until now.
    Given the scope and potential impact of transport rules on messages, it's important to understand how transport rules work. To learn more about transport rules, please refer to this document.
    https://technet.microsoft.com/en-us/library/dd351127(v=exchg.141).aspx
    Best Regards.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Lynn-Li
    TechNet Community Support

  • How can I automatically forward tweets via ios6 to Linkedin?

    How can I automatically forward tweets via ios6 to Linkedin?

    Login to your account via webmail and look for forwarding options.
    It's not something you do within Thunderbird.
    ''so that I can read them if necessary while I am on holiday''
    What difference does it make to read them from another account than your ordinary one when being on holiday?
    ''lost all my e-mails and history while my computer crashed''
    Make sure to backup your Thunderbird profile on a regular basis.
    http://kb.mozillazine.org/Thunderbird_:_FAQs_:_Backing_Up_and_Restoring
    ''I don't know how to install my e-mail on my smartphone''
    Ask someone for help who knows.
    ''set up an automatic message when I am on holiday''
    https://support.mozilla.org/en-US/kb/vacation-response

  • Automatic Forwarding

    Dear HP:
    On email account, I have enable automatic fowarding to my eprint account.  My eprint account indicates that it has been recieved but that it failed.  I also receive an email stating:
    "Cc: 
    Date: Sun, 2 Sep 2012 22:17:00 +0000 (UTC)
    Subject: ePrint Error
    Thank you for using HP's ePrint service. Your print job was received, but could not be printed.
    ePrint Error
    The ‘TO’ or ‘CC’ field of the email you sent did not include a printer email address."
    However, there obviously is  a correct address  or else the failed message would not be listed
    The idea is to have all emails autoamtically printed.
    Regards
    Mark

    The reason for this is probably due to the way that your email system automatically forwards the email. ePrint does not currently support automatic forwarding. When your email system is automatically forwarding to your ePrint email address, it is probably adding something extra into the email address, causing the system to not recongnize the ePrint email address, but it is still a valid email address so it is hitting our servers, the servers just are not recognizing it as a valid ePrint email address. 
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Automatic Forwarding in Workflow..

    Hi All,
    Is there a way to do an Automatic forwarding of workflow approvals to another SAP User ID. I do see an option in Office Setting and in SO36 but its not working for me. When I try to send some short message, it is working fine but not for workflow generated items.
    I highly appreciate your help.
    Thanks

    Hi, 
    Work items are not like emails since one item can go to more than one person. You have to use susbstition to allow other users access to your inbox.
    From their inbox, the user can go to settings -> workflow settings -> maintain substitute to give someone else access to their inbox.
    Cheers
    Mike

  • I AM TRYING TO FORWARD TX MESSAGES TO MY COMPUTER, CAN THIS BE DONE?

    I AM TRYING TO FORWARD TX MESSAGES TO MY COMPUTER, CAN THIS BE DONE?

    You should be able to forward them to your e-mail, or you could use a text backup app from Google Play that will backup your texts and e-mail them to you (SMS Backup and Restore is an example).

  • After last automatic update, error message XUL Runner error platform version '6.0.2' is not compatible with minVersion 6.0.1. maxVersion 6.0.1. I am unable to open Mozilla Firefox at all. Had to use Explorer to ask this question!

    After last automatic update, error message XUL Runner error platform version 6.0.2. is not compatible with min Version 6.0.1 maxVersion 6.0.1 appeared every time I try to open/run Mozilla Firefox.

    See:
    *[[/questions/869812]]
    *[[/questions/869951]]

  • How do I Forward a message to a List?

    Sending a message to a List only works when you start with the Address Book window. In that case you select the List in the left panel, which causes all the individual addresses in the list to appear in the right panel. Then you select all the individual addresses in the right panel, and right-click on them, and select "write". This puts all the individual addresses into "To" fields in a new, blank message. But what about when you already have a message you want to Forward, or Edit as New? In that case you are not starting with the Address Book window, you only have access to the Contacts panel in the Write window. If you select the List in the Contacts panel, and add it to the "To" field, it only adds the name of the list, which Thunderbird informs you is not a valid email address. How do I Forward a message to a List?

    Matt and Zenos, thanks for your help. The upgrade from 31.1.0 to 31.1.1 resolved the issue, and gave me the required functionality from the Contacts sidebar in the compose window. I can't verify it now, but it was probably the bug that Matt referred to, caused by spaces in the List name. Many thanks, and I will make it a point to put the recipients in Bcc, Zenos. Good tip. :)

  • Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?

    Is it possible to have Thunderbird send an e-mail automatically when a message with a specific subject is received?
    I basically want to create a rule that will send an automatically crafted form e-mail to the sender when I receive an e-mail with the subject line "New Swimmer". Is this possible?

    Thank you Todd, I was able to get it to work but I do have a few more questions...
    1) When I tested this, at the top of the message, before any of the text I created, this showed up: This is a multi-part message in MIME format. --------------040406040801080102080500 Content-Type: text/html; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit
    2) After the signature line, this showed up: --------------040406040801080102080500 Content-Type: image/jpeg Content-Transfer-Encoding: base64 Content-ID: /9j/4AAQSkZJRgABAQEAYABgAAD/4QAiRXhpZgAATU0AKgAAAAgAAQESAAMAAAABAAEAAAAA AAD/2wBDAAIBAQIBAQICAgICAgICAwUDAwMDAwYEBAMFBwYHBwcGBwcICQsJCAgKCAcHCg0K CgsMDAwMBwkODw0MDgsMDAz/2wBDAQICAgMDAwYDAwYMCAcIDAwMDAwMDAwMDAwMDAwMDAwM DAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAwMDAz/wAARCAC5ApUDASIAAhEBAxEB/8QA HwAAAQUBAQEBAQEAAAAAAAAAAAECAwQFBgcICQoL/8QAtRAAAgEDAwIEAwUFBAQAAAF9AQID AAQRBRIhMUEGE1FhByJxFDKBkaEII0KxwRVS0fAkM2JyggkKFhcYGRolJicoKSo0NTY3ODk6 Q0RFRkdISUpTVFVWV1hZWmNkZWZnaGlqc3R1dnd4eXqDhIWGh4iJipKTlJWWl5iZmqKjpKWm p6ipqrKztLW2t7i5usLDxMXGx8jJytLT1NXW19jZ2uHi4+Tl5ufo6erx8vP09fb3+Pn6/
    (It was actually much longer than that)
    Is there anyway that I can get that to go away? I obviously would prefer a nice, cleanly formatted e-mail to be sent just like I would send if I were creating it on the spot.
    Thanks,
    Evan

Maybe you are looking for