Automatic notification f/vendors reversal payment EFT in the same o.format

Hi everyone,
I would like to know if there is some standard SAP process for automatic notification to vendorswhen we do a reversal of an EFT payment in the same output format that original payment advice was sent ?
EFT payments are made to vendor using payment method T. When these EFT payments are made, a payment advice is sent to the vendor in the output format that is requested. i.e. either in Print, Fax or Email. Sometimes, after the payment information is sent to Bank, the payment document is reversed in SAP and bank is informed, but no notification is sent to vendors. A reversal advice or notification needs to be sent to vendors automatically when the EFT payment document is reversed.
Thank you for your time in advance.
Dago.

The forum [FPM - General|Enterprise Performance Management (SAP EPM); in which you originally posted your question deals mainly with the financial performance applications otherwise known as Enterprise Performance Management (EPM) carrying the BusinessObjects brand. Your question pertains to SAP [ERP Financials|SAP ERP Financials; which is covered by another forum. Therefore your message has been moved. Please adjust any bookmarks you might have and post to the appropriate area in the future, that way you are assured you will have the right audience reading your posts.
Thanks and best regards,
[Jeffrey Holdeman|http://wiki.sdn.sap.com/wiki/display/profile/Jeffrey+Holdeman]
SAP Labs, LLC
BusinessObjects Division
Americas Customer Solutions Adoption (CSA) team

Similar Messages

Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO

Is there a way to sort a PDF file with multiple pages by a specific field within the PDF? All pages have the same invoice format and i would like to sort by a field within and then print the documents. (Vendor, PO#, Date, ect.)

When you say field, do you mean specifically a form field, such as a text field? Or is the information regular text on the page?

Automatic notification to vendor for PO delivery

Dear all.
We have vendor delivery day and vendor email information in vendor master data,
Whether its possible to trigger email notification to vendor before near the vendor delivery day,
for example, if we have a vendor whose delivery day is 30 days, and one PO was created on Aug 1,
so the goods should be delivered before Aug 30, whether it 's posible to send email notification to vendor before Aug 30 automatically, for example we set 10 days before delivery day, so email can be sent on Aug 20?
Please let me know your thoughts on this.
Regards
Shyam

Hi,
Have a look at the reminder functionality within SAP - I believe you can set negative amounts for the number of days from delivery before the reminder is sent out which would fulfill your requirements.
i.e. Delivery Date = 30.08.2010
Reminder 1 (on inforecord or material master - it's copied to the PO when the PO is created) is set to -10.
Then you schedule the reminder job to run each day (trans ME91F). It checks to see if there are eny reminders to send out and in the case above, a reminder would be sent out on the 20.08.2010.
Kind Regards,
Steph.

F110 - each item in each payment document for the same vendor

Hi Guru,
When i use F110 to do auto payment run for one vendor, each item is paid by each payment document although the document currency is the same, do you know why it appear like this, by right, all the vendor open items should be paid in one payment document, what is the possibility for this scenario, how to check it.
thanks,
Kick

There are things that you should check which may be causing this:
(1) In the vendor master (FK03) go to the section "Payment Transactions Accounting" and see whether the box "Individual Pmnt" has been selected. If it has, then deselect it.
(2) In transaction FBZP go to the "Payment Methods in Company Code" section, double click on the relevant payment method, and check whether the box "Single Payment for marked item" has been selected. If so, deselect it.

Forward and Reverse Pricing Calculations in the Same Pricing procedure

Hello,
I have a requirement where the Pricing has to set up to do the forward as reverse calculations in the same pricing procedure,For example:
There is :
PR00-Base Price
Less
K004:Discount(%)
will give
ZN00:Net Price
Less Cost
EK02
will give the Profit Margin-ZMAR
Forward calculation is possible as per SAP standard but the requirement is also to do reverse calculation such as
By entering Profit Margin-,The system should do a backward(Reverse calculation) and arrive on the Net price from the Net Price(ZN00) it should calculate the Duscount automatically.
Your inputs on this would be most helpful.
Regards
Mohammed Roshan

hi,
In Sale Order / Billing, in normal circumstances, tax will be calculated on the base price.   On the other hand, if you want the system to reverse calculate, you can achieve the same.
In normal circumstances, system will calculate as follows:-,
you maintained the PR00 of a material as                                                           Rs 200.00
and Discount                                                                                Rs. 25.00
                        Net Value                                                                                Rs.175.00
If you want to reverse calculate which means your invoice value itself should be Rs.200.00 which is inclusive of Discount. Then your Discount condition type (or in case there is tax, any tax condition type - MWST / UTXJ) have the Calculation Type as u201CHu201D
With the above settings, your actual PR00 value would be 225.00 only, though you maintained Rs.200.00 for PR00.

PO issued for one vendor and GRPO another for the same

Hai members,
                  I have a problem, is it possible , to select a different vendor for the PO reaised for different vendor,
i.e.,
Po raised for 20 items against the Vendor   XYZ
But goods received
XYZ-   10
ABC-   10

Suda,
           At us the criteria is
One Vendor may have several companies
Once we produce order to him , he will dispatch the goods from either of the companies he had or from the both
but the PO purchase order comes from only in one name of the vendor
Suppose i had produced
100 Pcs order for Some Vendor -
   XYZ
But he may dispatch the same goods that we have ordered
from either of the comapnies he had i.e., XYZ, 123, ABC
but the PO is same
I think you got it Suda, please help me........ Thanks in advance

How to set the Reverse date to be the same as the Actual GI date by default

Hello,
On VL09 (reverse goods movement) screen, default reversal date is the system date.
Users have to select the line, click on define date button and enter the correct cancellation date to the local date field on the pop-up.
I want the reversal date on VL09 screen to be the same as the Actual GI date by default.
Thank you.

Hi,
I checked the program.
Check in routine FORM insert_data_for_reversal ---> IF Condition (( xlikpukwa-wbstk EQ charc AND xlikpukwa-vbtyp CA vbtyp_lief ) OR ( xlikpukwa-wbstk CA 'BC' AND xlikpukwa-vbtyp CA vbtyp_liav ). ---> 2 performs are there one with '01' and other with '02' as actual parameters.
In your case '01' is passing to the routine. if you try to pass '02' u can achive your requirement.
For testing in debug mode pass FIELDS-FIELD_ATTR = '02' for field name DATLO. then you can see the output.
Try to handle this problem using Enhancement Operations.
Hope this helps you.
Thanks
Raghavendra

Can I tell Acrobat where to automatically create forms when scanning in many of the same document?

The automatic form creator isnt very good at recognizing where I want text forms when I scan in this particular paper form. I have lots of these paper forms that look the same and am trying to convert each of them into a editable digital copy. Is there a way to help acrobat know where i want the text forms to be on the following scans without manually making the text forms everytime?

No, but you can:
- Use a script to create the fields in pre-defined locations
- Create them once and then copy them over (Ctrl+C, Ctrl+V) to over files
- Create them once and then use the Replace Pages function to other files.

F110 - Automatic email to vendor when payment run is carried out

Hi,
I am trying to configure automatic emails to be sent to vendor when automatic payment run is carried out.
Please note that i have already carried out the following settings:
Step 1- Define Std communication method as SMTP (Internet mail) in vendor master
Step 2 Maintain email address via FK02.
Step 3 - T-Code BERP Code to find Find event 00002040 This is a Function called SAMPLE_PROCESS_00002040, copy with another name i.e. ZSAMPLE_PROCESS_00002040
Step 4 T-Code FIBF -> Option -> Product ->a Customer, Write product name at your choice (for example ZMAIL) and make it active.
Step 5 T-Code FIBIF -> Option ->Process Function (or Module) ->. A Customer.
Process = 00002040
Module Function = ZSAMPLE_PROCESS_00002040
Product = ZMAIL (name of product define by you in step 4)
it will automatically send mail to vendor provided SCOT is configured.
However, when i carry out the payment run, email is not generated..
Can someone please help me out with the above?
Thanks in advance

Andi,
this might help....
Emailing SAP Remittance advice:
1.
For the following process to work SAP Connect needs to be configured for outgoing mail. This is carried out by the Basis team. The t-code is SCOT.
2.
<b>Vendor Master Data</b>
Define Std communication method as SMTP (Internet mail) and maintain an email address in the vendor master data.
3.
<b>T-Code BERP</b> Code to find the relevant BTE. Use the Selection Attribute to browse for your business area. In my case, it is AP-Payment Transactions hence FI-AP-AP-PT.
00002040 is the relevant process. This is a Function called SAMPLE_PROCESS_00002040. In this case, the FM only checks for an email address in the Vendor Master. If more logic is required a Z-version would need to be created.
4.
Use t-code FIBF to create the enhancement.
a)
Create a product.
A product groups together customer enhancements to BTEs developed in the customer's namespace. All customer enhancements assigned to a certain customer product can be released with the Activate Customer Product indicator. The OPEN_FI function module for a certain customer enhancement cannot find the corresponding customer function modules, until this has been done.
Create the product name (for example ZMAIL) and make it active.
FIBF->Settings->Products->of a Customer
b)
Assign the BTE to the FM:
Settings->Process Modules->of a customer
Assign the 00002040 process to the FM and Product.
5.
At the end of this process when the payment advice program is run, the event will be called and it will automatically send an email to the vendor.
6.
Assign an email address to the sap user who will be the outgoing accounting clerk. Define the Accounting Clerk for the outgoing email address:
SPRO->FI->AR/AP->Vendor Accounts->Master Data->Preparations for Creating Vendor Master Data->Define Accounting Clerks
hope it helps.

Vendor down payment process at the time final payment

Hi all
MY scenario I posted in F-48 down payment of Rs 50000 and assigned invoice for Rs 89000 in F-54. While clearing I entered Rs 50000 against the Down Payment and posted. Now I am posting payment for the balance amount i.e. Rs 39000 in F-58. I see that while selecting the Process Open Items, I am unable to find Rs 39000 in the list. Instead I am finding Rs 50000 and Rs 89000 in the list. If I am not remembering the document number for Rs 50000 I am unable to select the correct item and clear against Rs 89000. I wonder how do I identify in case there are more than 2 items with same amount Rs 50000 if I don't have the correct document number handy. This will lead to manual errors in companies where there are huge volume of transactions. I want to avoid manual errors of selecting wrong item and clearing them against correct Invoice.
Kindly suggest how to avoid these errors in the second scenario.
Regards
Jay

Hi
Sorry for late reply.. when settling the final payment against this invoice you are right you will see both D-PMT and the original invoices amount .. but you can for sure know the invoice and the right assigned D-PMT by adding columns Invoice reference in FBL1N
in FBL1N you will add it by change layout .
Regards
mahmoud El Nady

How to stop iPhone 4 contacts being automatically replaced by an iPhone 6 contacts with the same Apple ID logged in?

So my phone got damaged and I sent it for repair. This is not the issue.
Meanwhile, I'm using my Dad's previous iPhone 4. I placed the SIM card in and used a carrier app to transfer all my contacts. After my contacts replaced the one on my Dad's previous phone, he informed me that the contacts on his current phone iPhone 6+ had changed to mine to and he had lost all of his contacts.
Unfortunately he has yet to back up his new iPhone 6+ but I did managed to find a backup of the iPhone 4 stored on my computer.
Here comes the problem: I restored the back up from my computer on the iPhone 4. All the contacts were back. However, whenever the iPhone 4 has wifi on, the contacts will automatically get replaced by my contacts again? I have tried toggling iCloud here and there but nothing seems to be working.
Anyone knows the problem here?

Okay, as I'm not very clear how iCloud works, I'll try my best to explain what I tried to do.
Firstly, what I'm trying to do is to get the contacts restored on the iPhone 4. Once I've got them back, afraid that they might get replaced, I put the phone on airplane mode and turned off iCloud Backup. The iCloud 6 on the iPhone 6 is turned on and is connected to wifi. By turning the iCloud back on with the iPhone 4, I assumed that the replaced contacts on the iPhone 4 would overwrite the ones on the iPhone 6 but it seems to be happening the other way round.
Objective: Trying to get the restored contacts on the iPhone 4 to the iPhone 6.

I keep getting an error message at the bottom of my screen. Sync encountered an error while syncing. Unknown error. Sync will automatically retry this action. I keep getting the same message. What can I do ?

I have firefox 5.

It looks like your data is corrupted. Take a look to this articles and try to reset the information in your account: [[Replace your Sync information]]

Just switched from full CC to Photography CC and am getting notes on the screen saying that I have x days to fix my payment method. The payment method is the same as it was before and the $9.99 has already been deducted. Do I have to reinstall PS CC2014

Question?

This is an open forum, not Adobe support... you need Adobe staff support to help
Adobe contact information - http://helpx.adobe.com/contact.html
-Select your product and what you need help with
-Click on the blue box "Still need help? Contact us"
-or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

Automatic Payment Program Proposal split same vendor invoices

Hello,
We are facing some peculiar issue in Automatic Payment Program,when we run the automatic payment program payment proposal split the same vendor invoices into so many differnt proposals instead of consolidated proposal.
Every time it's not happen to same vendor it's dynamically changing to different vendors.
Eg:We have 10 vendor invoices and when we run the payment run 2 invoices is coming together and 3 invoices coming together not 10 same.
I have checked the vendor master data and payment program configuration for payment method for company code there is no tick selected for individual payment.
Could you some body explain me why system is behaving this way.
Thanks in advance.
Regards,
Satya

Hello Staya
Just check the line items of your vendor. Some line items may have the payment methods and some line items may not have the payment method. When you do the run in f110 it culbs all the invoices which have the same payment methods together and make the payments. Pls check this and see.
It could be the reason if you have not ticked the individual payments in vendor master.
Niranjala

Reverse payment document from F110

Hi
Due to entering of wrong exchange rate for group currency we need to correct a payment document that was created via automatic payment program (f110). I.e. to reverse and reset payment document and assign the same cheque number to the new payment document.
I tried the option of void/delete check information (FCHE/FCH9) and then reversing and re-setting (FBRA) the payment document and then to do a fresh payment and assign the same cheque number (since there is no issue with the cheque and the payment has been already made).
However, I noticed that it is not possible to delete the cheque information for an individual document that is created via F110.
Input on this is greatly appreciated.
Thanks
NW

Hi,
Delete the check information from F110 itself. Goto Environment > Check Information > Delete > For Payment Run.
Then reverse the document.
It will work.
Regards
Subhash

Automatic notification f/vendors reversal payment EFT in the same o.format

Similar Messages

Maybe you are looking for