Automatic Opening settings?

Hello,
i've encountered a problem opening a PDF from a CD wich has the files saved with another extension wich converts after having entered a password to PDF, its just that when i do that it automatically opens with Microsoft Word, wich obviously asks you for wich code to use to open it, instead of opening it with adobe 9.0
I've been told from the producers of the CD that i can only open the file trought the menu given after the password has been used, but that i needed to change the settings and put an "automatical opening" trought Adobe.
Now, i've tried checking the menues on Adobe 9.0 but i can't seem to se anywhere where i can change those settings, now i wonder if i have to look somewhere else or if there is somewhere this option in the program?
Thanks in advance.
PS> OS: Windows Vista

The extension is .DSF.PDF but its an extension made from the DVD maker, and i can see that trought browsing the files in the DVD, but i can open it only from the automatic menu that  is on that DVD and only after entering the password, so ITS NOT a zip file or anything else that you could mistake...
when i do that CMD command it shows:
.pdf=AcroExch.Document
Any suggestions/solutions?

Similar Messages

  • When I click on a hyperlink it automatically opens it up in a PDF or in Adobe Acrobat Reader. How do I change my settings back to normal so when I click on the link it opens it up in a new web page?

    When I click on a hyperlink it automatically opens it up in a PDF or Adobe Acrobat. How do I change my settings so that when I click on a link it opens it up in a new web page like it is supposed to?

    Install this Add-on: https://addons.mozilla.org/en-US/firefox/addon/open-link-in-new-tab/

  • When i open the browser, it automatically open a search engine. It does nt go even when i have selected the option"show a blank page" in the settings!

    this page search engine website gets automatically opened whenever i open the browser.

    Possible solution: if you type ''about:config'' in your address bar and search there for ''browser.startup.homepage'', you can check if it has a strange value and change it to a page you'd like.

  • Outlook 2010 "Your automatic reply settings cannot be displayed because the server is unavailable" error

    Hi,
    We recently introduced a Exchange 2010 server into our Exchange 2003 enviroment but had to stop migrating users over to it after it became appartent that users using Outlook 2010 could not switch on their Out Of Office, getting an "Your automatic reply settings
    cannot be displayed because the server is currently unavailable" error. However users on the new 2010 can set OOF if they use OWA or Outlook 2003!
    Running the Test E-mail AutoConfiguration shows no errors with the Log tab showing Autodiscover succeeded and the Results tab showing all the correct values, including a OOF URL of
    /Autodiscover/Autodiscover.xml">https://<servername>/Autodiscover/Autodiscover.xml into IE gives a XML file with a 600 error code.
    I have looked at loads of 'solutions' on the Internet but cannot get this working, anyone have any suggestions?
    Thank you,
    Craig

    Please verify IIS
    settings:
    ======================
    On Exchange CAS
    server, open IIS console,
    Go to default web site, double click “SSL
    Settings”,  make sure Client Certificates is set to “Ignore”
    Click Autodiscover, double click “SSL
    Settings”,  make sure Client Certificates is set to “Ignore”
    Click EWS, double click “SSL
    Settings”,  make sure Client Certificates is set to “Ignore”
    Click OAB, double click “SSL
    Settings”,  make sure Client Certificates is set to “Ignore”
    Please run IISRESET command to load the changes.
    Thanks.
    Tony Chen
    TechNet Community Support

  • TS2755 Messages disappear in inbox.  When I close out messenger entirely and reopen it, they appear.  Also, if I only have one message unread in my inbox and I open up my messenger it automatically opens the unread message.  Very frustrating....Please hel

    I have an iphone 4s, OS 4.1.1.  I am having issues with my messenger.  When I have a message open I will see a new text come through and then it disappears.  I have to close out of my messenger entirely and reopen it.  Once I reopen the message the text reappears.  Any suggestions?  Also, if I get a new message and there is only one unopened message in my inbox and I open my messenger it automatically opens that message.  Any way to fix this so that I decide when I want to open a certain message?
    Thanks in advance for your help!
    Jen

    There are several possible reasons that messages seem to 'disappear'.
    There are two types of email accounts: IMAP and POP. See https://support.mozilla.org/en-US/kb/glossary-terms-including-types-accounts
    If you have a POP account and are accessing the mail on more than one computer or smartphone, whichever device reads (downloads) the message first will have it locally, but it will no longer be listed or available on the other devices.
    If you have an IMAP account, the message stays on the server, but if one device (user) moves or deletes the message, it will affect the view on all devices. So, for example, if you are using your smartphone and take some action on an email, when you get back to your computer, it will reflect that same action (but you might not have realized what caused it).
    Sometimes the index of a mail folder (.msf) will get corrupted. If you right click on the name of the folder and select Properties, a 'Folder Properties' window will open. Select 'Repair Folder'. This may take care of the problem.
    Another, less likely, reason for messages not to show up in your inbox is having the preference set to show only unread or recent messages. Then once you read them they seem to disappear.
    If you are still having problems, please look at the following items and respond with the information.
    1) What operating system do you use (Win8, MAC, Linux, etc)?
    2) Are you using IMAP or POP?
    3) If your mail server has a browser interface (web mail access such as mail.google.com), do the messages show up there?
    4) Right click on the folder in question and select Properties.
    a) Number of messages?
    b) Size on disk?
    5) Left click on the account name; View settings for this account; highlight Server settings;
    What choices are marked under "When I delete a message"?
    6) What, if any, antivirus program do you have installed?

  • "Automatically open a downloaded file" doesn't work.

    When I download a file using Firefox, it asks me what I want to do with it (save it or open it with a certain program). I select to open it, and check the "Do this automatically for files like this from now on" box. Next time I download a file like that, it should just automatically open it with that program, right? It's not happening. Every time I download a file, I have to tell Firefox what to do, whether I've previously checked the box or not. In the settings dialogue, under Applications, the file type is listed, with the instruction to use that program. I don't believe it has ever worked like I think it should. Is this a bug, or something in my settings? Does anyone else have this issue?

    Automatic actions are linked to a MIME (content) type and not to a file extension.
    So if you set an automatically action and that same file type gets send with another content type then that automatically action won't work.
    *http://kb.mozillazine.org/File_types_and_download_actions

  • Microsoft Outlook 2010 & 2013 cannot set automatic reply settings

    Hello,
    We cannot seem to set automatic reply's within outlook 2010 & 2013.  We have an exchange server 2010.  We
    can setup automatic reply through OWA absolutely fine.   The error that we receive is 'Your automatic reply settings cannot be displayed because the server is currently unavailable.  Try again later.
    However we can setup out of office on any other office version below 2010 fine.    We have run through
    a number of tests and have come to the conclusion that the auto discover service is not configured correctly.   I have been told to run through the following
    "We need to make sure the IIS service is assigned to the certificate which includes mail.mydomainname.co.uk
    name:
    Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services
    POP,IMAP,SMTP,IIS
    Then restart IIS service
    to apply the changes.
    If the user is connect
    to mailbox from external environment as your test results, it is recommended to add the autodiscover.mydomain.co.uk name in your certificate with IIS service. If so, the autodiscover
    service can be accessed successfully in your posted second steps(https:/autodiscover.mydomain.co.uk/autodiscover/autodiscover.xml). Alternatively, if you don’t want to change your certificate configuration, we need to create a new SRV record for mail.mydomainname.co.uk
    to make your autodiscover succeed in last steps of Srv Record lookup method".
    So I followed this and opened Exchange Managemnet Shell and ran the following.....
    'Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,IMAP,SMTP,IIS'
    The following output was displayed:
    "VERBOSE: Connecting to SERVER2011.EXCHANGE.local
    VERBOSE: Connected to SERVER2011.EXCHANGE.local.
    [PS] C:\Windows\system32>Enable-ExchangeCertificate -Thumbprint 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA -Services POP,I
    MAP,SMTP,IIS
    WARNING: This certificate will not be used for external TLS connections with an FQDN of 'SERVER2011.EXCHANGE.local'
    because the CA-signed certificate with thumbprint '71ADF367E190E269C1036BBF4A09C55E62536791' takes precedence. The
    following receive/send connectors match that FQDN: Default SERVER2011.
    WARNING: This certificate will not be used for external TLS connections with an FQDN of
    'mail.companyname.co.uk' because the CA-signed certificate with thumbprint
    '67ECB1A383CBD05424C58F6A5E753C9377F49D3D' takes precedence. The following receive/send connectors match that FQDN:
    Windows SBS Internet Receive SERVER2011, Fax/Printer.
    Confirm
    Overwrite the existing default SMTP certificate?
    Current certificate: '67ECB1A383CBD05424C58F6A5E753C9377F49D3D' (expires 09/08/2015 09:06:17)
    Replace it with certificate: '62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' (expires 06/08/2015 17:05:22)
    [Y] Yes  [A] Yes to All  [N] No  [L] No to All  [?] Help (default is "Y"):"
    I opened up 'Internet Information
    Services (IIS) Manager to find 2 Server Certificates issues to 'mail.companyname'
    with the certificate hash' 62C247B3BD081D0A8B074D4A928A76E6DA3BABBA' and '71ADF367E190E269C1036BBF4A09C55E62536791'.
    I opened up the Exchange Management
    Console to confirm that the IMAP, POP, IIS, and SMTP services are bound to both of the certificates for 'mail.companyname'.co.uk
    I need to know if it is okay to proceed in replacing the certificate and running this
    command.
    Thank you

    Hi,
    We have this problem with some of our users, in that they get the server unavailable error when trying to activate the out of office.
    In our case this is because the Proxy is blocking the connection from the PC to the Exchange, so we just go to Internet Options - Connections - LAN Settings - Advanced (under proxy server) then just add *.domain.com into the Exceptions box at the bottom.
    This seems to resolve the issue and allow them to set their out of office. The only reason this reoccurs for these users is because their roaming profile for some reason won't save the proxy settings, which is a different issue.
    Hope this helps.

  • Exchange 2007 / Outlook 2013 "Your Automatic Reply Settings Cannot Be Displayed Because The Server Is Unavailable"

    One of our users is having problems setting replies from Outlook on his local PC.  This is an SBS 2008 Server with Exchange 2007.  The client PC is running Windows 8 with Outlook 2013.  This issue doesn't seem to affect other users but this
    is the only client with Outlook 2013.
    When trying to set an automatic reply from within Outlook 2013 we get the "Your automatic reply settings cannot be displayed because the server is unavailable".  Outlook seems to be connecting and working fine so connection to the server does
    exist.
    Trying this same operation from owa works without issue.  Please let me know what we need to do to find a solution.
    Thanks so much!

    Problem: 
    IMAP downloads inbox don't work after November patches.
    If you install a fresh OS and O2K13 unpatched ,the IMAP works fine.
    Fully patched O2K10 works fine too.
    It worked for my customer until November patch Tuesday broke the IMAP sync.
    Consultant opened case. 
    Response from Microsoft:
            This is with regards to the issue faced by you due to regression         caused by November security update. This is further to inform         you
    that fix is out and below is the download links for 32 bit         and 64 bit of the office suites. You need to apply all 3 hotfix.         The crash issue and IMAP issue would get resolved
    immediately         while the issue related to Free / Busy and OOF not getting set         would take 24-36 hours to start working once the patch is        
    applied.
    Below
            are the KB articles:
    Description
            of the Outlook 2013 hotfix package (Outlook-x-none.msp):         December 10, 2013:
    http://support.microsoft.com/kb/2825652        
    Description
            of the Word 2013 hotfix package (Word-x-none.msp): December 10,         2013:
    http://support.microsoft.com/kb/2837674        
    Description
            of the Office 2013 hotfix package (       2013:
    http://support.microsoft.com/kb/2849994        
        Description of the Office 2013 hotfix package (   December 10, 2013:
        http://support.microsoft.com/kb/2849994
    Issues that this hotfix package fixes
    Consider the following scenario:        
    You have a SharePoint Server environment that has complex             workflows.         
    You implement the ReceiveTimeOut registry entry to             increase the global timeout to 90 seconds.         
    You click Open this task             button to open a workflow task in Outlook 2013.       
            In this scenario, when you click any approval option from the         popup dialog box, you receive the following error message:        
    This task could not be updated at this               time.
    When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
    receive the         following error message:        
    Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
    item.
    Consider the following scenario:        
    Assume that User A is located on an on-premises Exchange             Server, and User B is located on Cloud.         
    Both the on-premises Exchange Server and the Cloud enables             the Federation Trust.         
    User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.         
    User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
    the shared calendar.       
            In this scenario, the shared calendar does not show any content.     
    Consider the following scenario:        
    You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.         
    You implement the Use Cached Exchange Mode for new and             Existing Outlook Profiles Group Policy settings and enable             it.       
            In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
    account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.     
    Consider the following scenario:        
    You have an Exchange Server that has Public Folders.         
    You create the Outlook Security               Settings folder under
    All               Public Folders.         
    You publish the AdminSecurityMode registry entry and set             to a value of 1.          
    You configure Outlook 2013 to use cached mode.       
            In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.   
        Description of the Word 2013 hotfix package (Word-x-none.msp):     December 10, 2013:
        http://support.microsoft.com/kb/2837674
        Assume that you open a meeting request in a separate window in     Outlook 2013. When you click
    Accept and     then click
    Send Reply Now,     Outlook crashes.
        Description of the Outlook 2013 hotfix package (Outlook-x-none.msp):     December 10, 2013:
        http://support.microsoft.com/kb/2825652
    Issues that this hotfix package fixes
    Assume that you have a recurring appointment that does not         have a subject. You make some changes to one instance of the         appointment and then save the instance. When you
    try to open or         delete the instance, Outlook may crash. Additionally, when you         drag-and-drop one instance of the appointment to a different        
    time in the calendar, Outlook may crash.     
    When you reply or forward an email message by using inline         replies, you cannot use the Close and Delete method of Outlook         Visual Basic for Application. Additionally, you
    receive the         following error message:        
    Run-time error '-2147467259               (80004005)': This method can't be used with an inline               response mail
    item.
    Consider the following scenario:        
    Assume that User A has a mailbox that is located on an             on-premises Exchange Server, and User B has a mailbox that             is located
    on Cloud.         
    Both the on-premises Exchange Server and the Cloud enable             the federation trust.         
    User A share his own calendar to User B with Full Details             permission, and send the sharing invitation to User B.         
    User B opens the sharing invitation from User A, click             Open this Calendar, Outlook browses to the Calendar module             and opens
    the shared calendar.       
            In this scenario, the shared calendar does not show any content.     
    Consider the following scenario:        
    You install Outlook 2013 on Windows Server 2008 R2 or             Windows Server 2012 with Terminal Server Role installed.         
    You implement the Use Cached               Exchange Mode for new and Existing Outlook Profiles             Group Policy
    settings and enable it.       
            In this scenario, when you open the           Outlook Account Settings window, and double-click the         Exchange
    account, the Use Cached           Exchange Mode check box is not checked in the popup         dialog box.     
    Consider the following scenario:        
    You have an Exchange Server that has Public Folders.         
    You create the Outlook Security               Settings folder under
    All               Public Folders.         
    You publish the AdminSecurityMode            
    registry entry and set to a value of 1.          
    You configure Outlook 2013 to use cached mode.       
            In this scenario, when Outlook 2013 connects to Exchange Server,         Outlook crashes.     
    Consider the following scenario:        
    You have two Active Directory forests (Forest A and Forest             B).         
    User A and User B have their mailboxes that are located on             Forest A.         
    User A share his own calendar with User B with Full             Details permission.         
    User B add the shared calendar and let it sync.         
    You move User B’s mailbox to Forest B.       
            In this scenario, the shared data in the shared calendar is         removed every second time that User A restarts Outlook. And it         is re-synced
    when User A browses to the Calendar module.
    Unfortunately TechNet isn't coming back, sorry folks :-(
    The 3 patches above immediately fixed the issue for me!
    Thanks so much!

  • I like the feature of the PDF being opened on the new tab on firefox browser windows. But the newer version (3.6 or 4.0) will automatically open PDF in a pop up adobe apps. How do I keep the PDF open on the new tab as before? thank you

    I like the feature of the PDF being opened on the new tab on firefox browser's windows. But the newer version (3.6 or 4.0) will automatically open PDF in a pop up adobe apps. How do I keep the PDF open on the new tab as before like the 3.5 ver.? I want the PDF opened in the new tab rather than in the Adobe's app's pop up window. Could you help?
    thank you

    '''I fixed mine by removing the Ask.com extension.'''
    Tools
    Add-ons
    Settings icon
    View Recent Updates
    Ask.com '''DISABLE'''
    Running FF 8.0 on Windows 7 (64-bit)

  • Can't select pictures in bridge as they automatically open in acr

    I am using a macbook pro. I have a problem with bridge.  When I have downloaded my pictures with photodownloader, they appear in bridge. There is no problem with them there until I try to click on one, it automatically opens it up in camera raw. I can use the arrow keys to navigate but I have to click on one to start and go through to acr, then quit out and return to bridge. This means I can't select multiple images to edit in raw because as soon as I click on one, it opens in raw straight away.  It makes no difference if I hold down cmd, option or shift or all of them in different combinations or even all at once.
    This problem only recently started - I think maybe the latest upgrade has had something to do with it.
    It is really frustrating!!!

    Next time you post, please provide sensible details:
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    A screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Automatically open raw files in camera raw

    PLEASE READ the post before posting a reply as i may have already tried something you think might be the fix.
    basics: latest version of all adobe CC 2014 products including bridge 6.1.0
    win8.1
    after i've imported raw files (either RW2 or CR2) it USED to be that when i double clicked on a file it automatically opened camera raw and then after my edits and i clicked OPEN IMAGE it would then open in pshop.
    now they open in windows image viewer (sic)
    SO
    i went to EDIT>PREFERENCES and changed the specific camera files to open in pshop 2014. (as there's nothing that allows 'open in camera raw')
    so now when i double click on a file in BRIDGE it opens PHOTOSHOP and THEN goes to Camera Raw 8.6
    BUT...
    i want to DOUBLE CLICK and open CAMERA RAW without going into pshop.
    yes i know if i right click on the image it offers 'open in camera raw' which works, OR i can Ctrl+R and they open just fine,
    but where can i set it so a double click (which is faster) does this automatically?
    thanks in advance.

    What kind of TIFFs?  Are they multi-layered, for instance?  ACR will not open layered files.
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW What is the problem?

    Even though I have checked "Automatically open all supported TIFF's" in Camera RAw Preferences - My tiff files do not open up in camera RAW. How can I correct the problem?

    What kind of TIFFs?  Are they multi-layered, for instance?  ACR will not open layered files.
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    BOILERPLATE TEXT:
    Note that because this is boilerplate text, not all points may apply to any given, specific poster.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • When I click on my mail account it automatically opens a a message.  How do I set it to display my inbox?

    Help!  When I open my mail account it automatically opens to a message(often an old one) instead of displaying my inbox with a list of 10 or 25 recent messages.  I have clicked that option in the settings.  How do I change this?

    Quit the mail app then reset your iPad.
    Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart.
    Also, when looking at the list of your emails that have already been delivered tap and pull down on that list then let go. This asked the Mail app to check again.

  • I work on two screens. With the new updates, my computer will not automatically open a new window on the second screen.

    I work on two screens. With the new updates we cannot automatically open a new window on the second screen, but have to move them over manually. Not a huge problem, but because of the nature of the work, it gets tedious.

    Hi Annowriter,
    Thank you for your question, I understand that it is annoying to have to move a new window to the second screen. Since it opens in the active screen this may have been a stored preference, however it is not the default.
    There is an add on called [https://addons.mozilla.org/en-US/firefox/addon/monitor-master/ Monitor Master] that customizes settings like this. Check it out.

  • I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the defaul for opening a project?

    I'm using Premiere Elements 11, which automatically opens in a project window for HD. I want to reset the default for SD. How can I reset the default for opening a project?

    scottypet
    For Premiere Elements 11 and 12, you cannot change its default project preset from NTSC AVCHD Full HD1080i30 or its PAL counterpart PAL AVCHD Full HD1080i25 to something else.
    For each project, you can set the project preset manually if you do not want the program to take over setting the project preset based
    on the properties of the first drag to the Timeline.
    To set the project preset manually, open the project to the Expert workspace, go to File Menu/New/Project and Change Settings.
    In the Change Settings area, change the project preset. Before you exit that area, be sure to have a check mark next to "Force Selected Project Setting on This Project" in the new project dialog.
    Then you import your source media, using the appropriate Add Media choice.
    ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
    If you want a version of Premiere Elements that uses the default project preset of NTSC DV Standard or its PAL counterpart PAL DV Standard, then you need to look to a version of Premiere Elements earlier than 11.
    Please let me know if you have any further questions on this or need clarification.
    Thank you.
    ATR

Maybe you are looking for