Automatic payment process for a vendor from different company code

Dear Friends,
We have a situation here to process automatic payment for a vendor which belongs to our subsidiary.
The scenario is explained below.
Our main company code A pays for a particular vendor (Eg. V1) from company code B.
When processing automatic payment for company code A, the vendor V1 from comapny code B need to be selected for payment and the DME file generated should include the payment for V1 aswell.
I know that we can set up a company code as paying company code for others but the situation here is only to process payment for one particular vendor (not all) from the other ccode.
I would appreciate your advise in this matter.
Regards,
AJ.

Dear all,
Our situation is when we run the payment run for company code A it should also select the vendor V1 from company code B because the payment for vendor V1 has to be paid from the house bank of Ccde A. Cocde B is in different country and uses different house bank.
Is there any way to make the house bank of ccde A to pay for the vendor V1?
Regards,
AJ.

Similar Messages

Configuration for consolidated check for same vendor from different company

Hi All,
My company is trying to print a single check for same vendor with same vendor number in multiple company code.
The Automatic payment parameters has all company codes where the vendor is having open items.
But when payment run is carried out and the check is printed, there are more than 1 check printed for the same vendor corresponding to the cleared invoices.
One company is paying for all other companies and still multiple checks are printed.
Can someone help with some lead to resolve this issue.
Points will be assigned for helpful tips and answers.
Thanks alot in advance

Hi,
i understood ur problem so dont worry.... solution is there in sap
while confiqure automatic payment program in FBZP give paying company code payment transaction give company code what check through you want to pay that ....ofter that payment will go through this company code check only
may be this information is useful to you

Automatic Payment Programme for multiple vendors process

Hi SAP FICO Experts,
Please send Automatic Payment Programme for multiple vendors process
Step by step
Regards
Maran

Hi,
You need to follow same process.
Regards,
Tejas

AP - One Check for Vendor from two Company Codes

Our Company would like to issue one check for a vendor in two company codes.
Configuration has the paying company code = sending company code.
So the payment proposal will want to create two checks, one for each company code.
Question --- Is there a way to generate one check for the one vendor in two company codes.
Thank you,
Jeffrey

Dear Jeffrey,
Let say there are two company codes 100 and 200, in the config, you will need to make paying company code for company code 100 = 100 and
Paying company code for company code 200 = 100.
you will need to set the Intercompany balancing account in Tcode OBYA.
Once you do this, the other process remains the same. Should you have questions, let me know.
Thanks
Raghuram

Withholding tax of vendor in different company code

Hi All,
We are facing problem that withholding tax of single vendor is being deducted correctly in one of the company code while in others, it deducts 0 tax.
Single vendor e.g. 100002 is created in Company Code 112
The same vendor is extended in Company Code 113, 114 and 115
The issue is, we have created four different invoices in different company codes. Now we are making payment by selecting four of the invoices through F-58. It deducts the withholding tax in only 112 company code, while in others its calculating wht = 0
The configuration is such that, withholding tax type '01' is used in vendor master and in all invoices. The minimum limit is set to 0 so there is not any possibility of not exceeding the minimum amount. The other thing is withholding tax is set at country level, and all of our company code belong to same country so no issue of different configuration. We also check if 'Liable' is checked in each vendor master as well as no exemption is given in any period.
What could be the possibility?
Warm Regards,
Nayab

Thank you Chandra for quick response.
I checked, everything is perfectly set. I guess there is some issue with extension of same vendor in different company codes as e.g. in new company code, same withholding tax code is applied on vendor's invoice and deducted correctly while for other vendor it is not.
Is there any thing related to vendor master?
PS: Can we check through some report if withholding tax amount on some particular vendor is exceeded with its minimum withholding tax amount, set in IMG?

Consolidation of multiple invoices from different company codes

Dear sap gurus,
Please advice me on consolidation of invoices from different company codes?
If no why consolidation of invoices from different company code is not recommended ?
what are the disadvantages?
Phani

Hi,
What is your requiremen? Which Invoices Vendors or Customers?
Using ABAP we can develop the report program.
You want to view a report of Customer/Vendor Invoices of all Company Codes at a time correct.
So, in your report map the invoices of different company codes to one report.
Thanks
Chandra

XK99 detailed steps to extend vendors from one company code to other

Company code X having vendors 9000000000 to 9999999999. Now I wanted to extend all vendors to Y company code. Kindly suggest me detailed steps. i know XK99 but give steps.

Hi,
Using XK99 T.code you can extend vendors from one comp code to another.
1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
2. Their will be 2 tab. select the check for DO not change for existing data.
3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
4. Bottem of this tab you have to mention the FROM company code.
5. Press F8.
6. Now save.
With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
Let me know if still need any further info.
Hope this will help you..
Thanks,
Kumar Arcot

MIRO for multiple PO from differenct company codes

Hi,
One of the user would like to do MIRO (Invoicing) of multipe PO's together which belong to different company code.
When I try to do it, it gives a error sayign cross company code transaction and also the functional company code curreny is different from invoicing company code(thouugh PO's are raised in USD)
For the error, SAP says I can make it a warning.
However, from business perspective can anyone tell me why this should not be done. I dont want to make the error msg warning and let the user proceed.
Can anyone please let me know?
Thanks,
JR

It is not a part of Standard SAP, nor a recommended Practice, nor it is logical.
We understand that when we are speaking of consolidating invoice of different company code, is it an acceptable business practice. In my opinion it is not acceptable business practise. Reason being that Company Code are different Legal entity and how is it correct to even think of merging transactions of different Company code in single invoice. It will invite financial confilct, audit problems and host of unexpected and unanticipated issues.
It is not recommended to go for any such development also to meet the requirement. Please check with the audit team in all locations whether it would be accepted. Technically also verify with FI team the impact. In my opinion it is a strong NO NO.
Regards,
Rajesh Banka

Mass extend vendors from one company code to other

Company code X having vendors 9000000000 to 9999999999. No I wanted extend all vendors to Y company code. Kindly suggest me.
Thanks
GP

Hi,
Using XK99 T.code you can extend vendors from one comp code to another.
1. In XK99 slect the LFB1 - Company code dat ,and press F8.( Do not select the fields like MM17).
2. Their will be 2 tab. select the check for DO not change for existing data.
3. In other tab (data to be created)...give the list of vendors or Balck and the TO comp code.
4. Bottem of this tab you have to mention the FROM company code.
5. Press F8.
6. Now save.
With the same method you can extend vendors from one Pur org. to another pur org. by selecting LFM1 instead of LFB1.
Let me know if still need any further info.
Hope this will help you..
Thanks,
Kumar Arcot

Extend vendor to different company code

Hi All,
We are trying to find an Enterprise Service that fits the following requirement:
Expand an existing vendor to a different Company Code.
We are ok if we need to extend an existing ES to fit the requirement.
your help will much appreciated
Thanks.
Anindita

Hi,
XK01, enter same vendor number and enter different company code.
If you want to extend only company code then use FK01. If you want to extend purchasing level also then use XK01.
General data will be same.
Regards,
Chandra

Offset customer and vendor open items from different company codes

Dear all,
I would appreciate if you could help me with below issue:
We have 2 company codes, these 2 company codes are under one company, i.e one group.
When one company code (company code A) make vendor payment, the other company code (company code B) where this vendor is a customer and having Dr. balance, request company code A to deduct the amount receivable from B's customer, i.e vendor of company code A.
Could it be possible to do this ín SAP?
How to offset these two balances while running automatic payment F110?
I would obliged any of your advise.
Thank you very much.
Rgds,
Linh

Hi,
Please check following links
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/90f33e12-aeac-2a10-2186-ed8301f778ba?overridelayout=t…
Cross company-code invoice posting and configuration - ERP Financials - SCN Wiki
Regards,
Tejas

Creating Workflows for a Corporation with Different Company Codes

Hi,
We have just done a roll-out for Company A which is part of a big corporation (group of companies).
The system version implemented is ECC 6.0 with modules (HR,MM,FI,DBM)
I have implemented and rolled out several workflows (Leave,PR,PO, Payment approval)for Company A and am now expected to do the same workflows for Company B,the business processes as per flowcharts remain the same as for Company A.
Company A uses company code 1000, while company B will use company code 2000.
Users in Company B will log in to the same PRD servers.
Some approvers of workflow in company A will be responsible for some workflow approvals for staff in company B though HR have completed implementing an org structure for company B.
Is it possible to use the same workflow templates by saving them in a different name and change the agents to reflect company B org,if so how do I go about it?
In future we will also roll-out to Company C.
What is the best way to do it and save time as well.
Thank you.
Missa

Hi
Consider a scenario like EMPB who belongs to CMP B has applied a leave and EMPA manager of EMPB who belongs to CMP A,
Now in order to send the leave request for approval to EMPA you can define or create a rule from PFAC transaction. in such a way that
1. First try to get the initiator details like his personnel number.
2. Once you have the Employee number , by using it you can read hi Org Assignment details from PA0001 to get employee sepecifc compnay code.
3. BAsed on the employee group and sub group you might have to decide who is manager I hope this would be defined already in the org structure.
4. Once you know who is the manager , get his position details and from it get holder and his communications info from PA0105.
IN this way if you define a rule by calling a function module. You can make use of the same workflow. but based on the initiator details you need to dort out the manager.
The simple way is to define and impement the Rules dynamically to fetch the agents based on the Personel are/sub are and employee group and sub group.
Regards
Pavan

How to create group bom for multiple plants with different company codes

Dear all,
In my current scenario we have 5 Company codes with a plant with each company. The same kind of materials exist in all the 5 plants, so what i want is when i create any BOM, that BOM has to extend in all the company codes, as with GROUP BOM i can able to extend the same in only one company code.
So how to do this?
Thanks in Advance
Bhushan

For that first extend all the materials to all the plants... In one plant create a BOM for the material..
In all other polants in CS01, click COpy from .. There you mention the matreial and the plant in which the BOm is alerady available..
karthick

Creating PO Automatically ( for different company code)

Hi All, I have a business requirement wherein i need to create an automatic Purchase Order (in a different company code).
Lemme explain it..
1) I have created a sales order using EDI file in company code say xxxx(thru idoc)
Now the business requirement is ;
How can i create an automatic PO in the same system but different company code say yyyy..if anyone has come across this scenario please post your tots, if u cud please suggest the possibilities which are logically possible, for sure ur efforts will be appreciated and rewarded..
Many Thanks

Hey Martin thanks for making an effort, well i posted here coz i could find in a link where its says "The best practice would be set up a workflow event that is consumed by PUR_ORDER_CREATE_VIA_SD_EVENT . The function is linked to SD event BUS2032 ALECREATED in transaction SWETYPV. ".please find the link below for your reference which has the same business requirement i have..
http://expertanswercenter.techtarget.com/eac/knowledgebaseAnswer/0,295199,sid63_gci983423,00.html
Awaiting your reply..Thanks

STO - Two plants within Different Company Codes

Hello,
Kindly help me out with this case, i want to create a STO for two plants within DIFFERENT company codes, so i've created all the required configuration and master data including creating the supplying plant as a vendor and the ordering plant as a customer, also all master data is maintained in both plants and i tried the scenario on the IDES system and it works okay so i know i'm on the right procedures. The problem is that i create the PO, but when i go to Transaction Code VL10B to create the delivery it gives me an error ( Delivery with no Line item not allowed ) even though there is more than enough stock in the storage location. Kindly help me out.

17.01.2010     Stock                            10.500,000      0,000      10.300,000
13.01.2010     Order     Totals record     100,000-     100,000      10.300,000
13.01.2010     Deliv.     Totals record     100,000-     100,000      10.300,000
17.01.2010     StLcSt     SLFR     10.500,000      0,000      10.300,000
13.01.2010     Order     Totals record     100,000-     100,000      10.300,000
13.01.2010     Deliv.     Totals record     100,000-     100,000      10.300,000
17.01.2010     BtchSt     123     10.500,000      0,000      10.400,000
13.01.2010     Deliv.     Totals record     100,000-     100,000      10.400,000
17.01.2010     BStLoc     123       /SLFR     10.500,000      0,000      10.400,000
13.01.2010     Deliv.     Totals record     100,000-     100,000      10.400,000
This is the whole table.
This is what i got. i believe that it is an availability check problem, i just can't see what is the solution.
SLFR is the Storage location of the issuing plant.

Automatic payment process for a vendor from different company code

Similar Messages

Maybe you are looking for