Automatic TR to TO conversion

Hello PP experts,
We have a business requirement where automatic conversion of TRW to TO is required in REM .As per my knowledge , this can be done in OK -
production scheduling profile, for the production orders. But for repetitive manufacturing how this can be done ?
can we use user exit for this requirement?
Please let me , whether my understanding is correct and which user exit can be used for this.
Regards,
Mona Tiara

Hello,
TR -
Transfer request
TO -
Transfer Order
We want a user exit OR programme in REM to convert automatically TR to TO.
so that we can run that program in the backround and convert TR to TO. In that case manual conversion of TR to TO can be avoided.
Regards,
Mona tiwari

Similar Messages

Automatic PR to PO conversion for non stock material

Hi,
Can Automatic PR to PO conversion be done for non stock material (with account assignment category and no material master).
We are presently doing only for stock material with transaction ME59N.
Thanks and Regards,
Pratap

Some of the pre-requisites for automatic generation of PO from PR are
1. The system selects only those requisitions for automatic PO generation for which the indicator Automatic purchase order has been set for both the material and the vendor.
2. It can only generate purchase orders from requisitions to which a unique source of supply has already been assigned.
So material master is mandatory if you want to create PO automatically from PR and you need to activate this option both at vendor and material master.

Automatically removed from group conversation for being idle?

Where I work, we have a group/team conversation for people to ask questions, make comments, share information, etc.
In the past few weeks I have noticed that I have been being removed from this group conversation. Find the message "You have been removed from this conversation."
I usually start this conversation but leave permission open for everyone so anyone can add people as they come in for later shifts. I know it's possible to right click on a person's name and remove them from the conversion.
When this started happening, I researched how to stop it from happening and found that if I changed the permissions to me alone, I am not removed from the conversation.
My questions are: does Lync automatically remove a person from a conversation if they are idle for a certain amount of time? If so, what is the time frame? Does just that person have to be idle or the entire conversation?
Essentially, I'm trying to find out if some person is actively removing me or if it's some automatic setting within Lync.

Yes there is a timeout, it's per person but mostly the entire conversation though due to "sending or receiving and instant message. You can't easily turn it off, but you can change the value a bit. See set-csclientpolicy setting
ConferenceIMIdleTimeout.
http://technet.microsoft.com/en-us/library/gg398300.aspx
Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question please click "Mark As Answer".
SWC Unified Communications

Automate RAW to JPEG conversions

Does anyone know of an easy/simple way to automate RAW conversions to jpeg?
When I setup an action, it stalls on the RAW file open command and I cannot seem to automate this step.
I have looked at 3rd party s/w like Irfanview but the output quality seems poor.
Any tips from anyone gladly received.
Thanks.

grwiffen4760 wrote:
When converting from RAW, can you setup a set of default RAW editor settings that will be applied to each file conversion?
You can address RAW settings two way. You can set default ACR settings for each of your cameras. Open a RAW file from one of your Cameras. Use the Camera profile tab in the ACR Dialog and try out the profiles Adobe supplied for your camera. When you find the one you like best set that one in the profile tab. Then use the other tabs and make the adjustments you would like to see as your defaults. When you like what you have set. Set this setup as your cameras default. Repeat this process using Raw files from you other cameras.
Now you cam also set RAW settings for you RAW files without creatine any image files for groups of raw files. IMO the best way to do this is from the Bridge. The bridge shows you thumbnails of your RAW files and I beleive adjust them under its covers by using ACR and you default settings for RAW files without saved ACR settings. What I do in the Bridge is select thumbnails without saved settings in groups that seeem to have simular exposures and open this group in ACR. One I have all the image in ACR I'll adjust one of them and then sync the rest setting to the setting I just made to the one. Then if some of the thumbnails look like the need a crop I set crop for those one at a time. Finially I'll click on ACR done button. ACR will then record setting for each RAW file either in Sidecar files or in the ACR database.
When you use an Image Processor Photoshop script to process your RAW files into RGB Image files the saved ACR settings will be used for those files that have settings and your default settings settings for files that don't have saved settings.

Tools to help us automate testing of major conversion

Hello:
We are currently moving a large data-centric ORACLE FORMS 3.0 application to the ORACLE FORMS 10g platform.
I am wondering if there is a black-box testing tool out there that can perform the following:
1. Hook into the client (PC running a secure terminal emulator) and capture actual user keystrokes on the existing ORACLE FORMS 3.0 application
2. Execute the captured keystrokes in the form of a script against the converted ORACLE FORMS 10g application
In short, we are looking to see if there are tools out there that will help us automate the black-box validation of the converted UI.
Thanks,
Thomas Morgan
MedImpact Healthcare Systems Inc,
San Diego

Microsoft Test could manage this, but I am unable to determine whether/not it is still available. Google returns countless macro recorders that might be adapted to your purpose, but I suspect their limitation will be lack of support for aggregating several macros into a suite.
Here's a blog entry that discusses automated testing, and contains several recommendations and/or shameless plugs, that might be of use to you:
http://discuss.joelonsoftware.com/default.asp?biz.5.373266.13
HTH,
Eric Adamson
Lansing, Michigan

Automatic PDF to XDP conversion

Hello,
Is there a way I can programatically generate an XDP from a PDF using livecycle or any other tool? I have looked at the XPAAJ library but was VERY disappointed with the XDP file it exports. Not only is it all encoded in a binary "chunk", but it doens't even load in lifecycle.
I essentially want to convert my PDF to readable XDP, identical to what happens when you use "Save as XDP" in lifecycle designer. The only problem is that I need to do this automatically, without manually opening livecycle etc.
Thanks for any help,
Evan

Hi Evan,
Not sure if i understood your requirement - Do you want to generate the XDP data file ? If so, then you need nothing but a java program which can generate a XML file .
PDF template + XDP (data binds to fields in PDF template during runtime)= Data filled PDF file.
Open the PDF template in Acrobat livecycle Designer adn enter some sample test data in the file. Do a save as of the sample data as XDP.
Using this XDP file as a boiler plate template generate XDP fiile using a java program ( just the way you wud generate a XML file ).
Hope this helps
Regards
Samant

Any Automatic conversion from JSP to WebDynPro

Is there is any Automatic approach to have conversion from JSP to WebDynPro

+1
Even for JSF (Java Server Faces) application this would be a manual process.
Even both JSF and WD have a lot of similar concepts there are numerous differences in approaches used here and there, that cannot be automated. Or at least you'll spend more time for the tool then for the manual job.
VS

PR to PO conversion error - Partial line items not getting converted

Hi All,
Automatic PR to PO conversion ( ME59N ) is not happening for few line items.
For the same Article,site, vendor combinations,its getting converted on few days and on few days its not.
No changes were made to the any.
1. Source List is created for the Article & Vendor combination. Validity is fine. Fixed vendor option is checked.
2. Info record is maintained.
3. Auto PO option is checked in Vendor Master
4. No release Strategy
Will the Purchase Group have any impact in the conversion?
Kindly share your views.
Thanks in adance.
Regards,
Bhaskar

It's going to be a data selection problem. If it was a problem with conversion you would see something recorded in the log (assuming you have the log parameter set to show all messages).
Make sure the Auto PO flags are set in the correct purchasing org and site. Does your requisition have a purcahsing org?
What selection critera do you have set in ME59N? You mention that that the problem only occurs on certain days so it could be related to the release date.
The only other thing I could suggest is authorisation checks. Are you approved for the correct activity types (the activity for ME59N is not create) , plants, purchasing groups etc.
Also keep in mind everything I have said may not be relevant to the IS-Retail solution you are using. I can't be certain if there are any differences in this area when you are running that solution. It might be worth asking the question in that forum http://scn.sap.com/community/retail

Can Preview be set to automatically open PDF docs?

I am often converting/printing word docs into PDF docs in iMac Lion. I would like to set so converted PDF docs would open automatically in Preview.
Is it possible to set so? If then how?

Thanks but I already have Preview as default. It doesn't open freshly converted pdf-s automatically. I have to go to Finder and open them from there. I would like to skip that step and make Preview open freshly converted PDF doc automatically as soon as conversion is completed and document is created in Finder.

Having to leave the conversation and re-enter to read iMessage.

My iMessages aren't coming through while 'in' conversaton, i have to leave the conversation and load again to see the new message.
My friend on her 3GS is not having to do this and all my iMessages are coming through automatically with the the conversation open.
How can I make it 'auto-detect' / 'auto update'?
Thanks

Try force-closing it again followed by resetting your phone (hold the on/off and home buttons at the same time until you see the Apple logo, ignoring the off slider that appears first, then release). If the problem persists you may have to back up your phone and restore it as described here: http://support.apple.com/kb/HT1414. Before restoring be sure to sync with iTunes and back up your phone. It's also a good idea to import your photos to your computer (see http://support.apple.com/kb/HT4083) and back up your contacts (by syncing them with iCloud, Google or another cloud service, or to a supported program using iTunes.

Give me details about rule details functions conversion, currency etc in bi

give me details about rule details functions conversion, currency etc in bi when creating transformation

Rule Type
Use
The rule type determines whether and how a characteristic or key figure, or a data field or key field is updated into the target.
Direct Assignment:
The field is filled directly from the selected source InfoObject. If the system does not propose a source InfoObject, you can assign a source InfoObject of the same type (amount, number, integer, quantity, float, time) or you can create a routine.
If you assign a source InfoObject to a target InfoObject that has the same type but a different currency, you have to translate the source currency into the target currency using a currency translation, or apply the source currency.
If you assign a source InfoObject to a target InfoObject that has the same type but a different unit of measure, you have to convert the source unit of measure into the target unit of measure using a unit of measure conversion, or apply the unit of measure from the source.
Constant:
The field is not filled by the InfoObject; it is filled directly with the value specified.
Formula:
The InfoObject is updated with a value determined using a formula.
Read Master Data:
The InfoObject is updated by reading the master data table of a characteristic that is included in the source with a key and a value and that contains the corresponding InfoObject as an attribute. The attributes and their values are read using the key and are then returned.
The Financial Management Area characteristic is included in the target but does not exist in the source as a characteristic. However, the source contains a characteristic (cost center, for example) that has the Financial Management Area characteristic as an attribute. You can read the Financial Management Area attribute from the master data table and use it to fill the Financial Management Area characteristic in the target.
It is not possible to read recursively, that is, to read additional attributes for the attribute. To do this, you have to use routines.
If you have changed master data, you have to execute the change run. By reading the master data, the active version is read. If this is not available, an error occurs.
If the attribute is time dependent, you also have to define when it should be read: at the current date (sy-date), at the beginning or end of a period (defined by a time characteristic in the InfoSource), or at a constant date that you enter directly. Sy-date is used as the default.
Routine:
The field is filled by the transformation routine you have written.
The system allows you to select whether the routine is to be valid for all attributes for this characteristic, or only for the attributes displayed.
Transformation rules generally only have one return value. If you select Return Table, the corresponding key figure routine no longer has a return value; it has a return table. You can then generate any number of values from a data record.
For DataStore objects and InfoObjects: you cannot use the return code in the routine for data fields that are updated by being overwritten. If you do not want to update specific records, you can delete these from the start routine.
If, for the same characteristic, you generate different rules for different key figures or data fields, a separate data record can be created for each key figure from a data record of the source.
With InfoCubes: You can also select Routine with Unit. The return parameter 'UNIT' is then also added to the routine. You can store the required unit of the key figure, such as 'ST', in this parameter. You can use this option, for example, to convert the unit KG in the source, into tons in the target.
If you fill the target key figure from a transformation routine, currency translation has to be performed using the transformation routine. This means that automatic calculation is not possible.
Time Update:
When performing a time update, automatic time conversion and time distribution are available.
Direct Update: the system automatically performs a time conversion.
Time Conversion:
You can update source time characteristics to target time characteristics using automatic time conversion. This function is not available for DataStore objects, since time characteristics are treated as normal data fields. The system only displays the time characteristics for which an automatic time conversion routine exists.
Time Distribution:
You can update time characteristics with time distribution. All the key figures that can be added are split into correspondingly smaller units of time. If the source contains a time characteristic (such as 0CALMONTH) that is not as precise as a time characteristic of the target (such as 0CALWEEK), you can combine these characteristics with one another in the rule. The system then performs time distribution in the transformation.
The time distribution is always applied to all key figures.
Initial:
The field is not filled. It remains empty.
No Transformation:
The key figures are not written to the InfoProvider.
Unit of Measure Conversion and Currency Translation
You can convert data records into the unit of measure or currency in the target transformation.
Assigning InfoObjects for Converting Amounts or Currencies
Use
An InfoObject has to be assigned to a source field of a DataSource if currencies or units of measure need to be converted. The translation types require InfoObjects as input fields to carry out a conversion. You therefore have to assign the appropriate InfoObject to the source field.
If the target has a fixed unit, you only have to assign an InfoObject if you want to carry out a conversion. Otherwise, you can select the No Conversion option.
Procedure
1.      You are in the rule details. Select the rule type Direct Assignment.
2.      Select an appropriate key figure in the InfoObject Assignment field in the Source Fields of Rule area.
3.      Choose the required conversion in the Currency field.
4.      Choose Transfer Values.
Example
In your transformation, you want to assign the AMOUNT field of the DataSource to the FIX_EUR InfoObject in your target, carrying out a currency conversion. To do so, you assign the FIX_EUR InfoObject to the AMOUNT field in the rule details so that the currency can be read from the InfoObject.
Hope this helps u...
Regards,
KK.

Asha 311:Sent messages deleted automatically afte...

Hi '
My name is umesh and i have brought a nokia asha 311 phone But i have recently noticed that my previously sent message is being deleted automatically from all my conversations (Used group messaging to send a sms) that Particular message is deleted from all my conversations and
I got and surprsingly low battery back up dun know why is that
Please tell me Is this normal in asha 311 that deleting the sent messages automatically

Hey Support my Nokia c5 phone messages got deleted automatically.. its happening for the second time since i bought it.. many of my imp messages, drafts and saved msgs got deleted... showing all as empty.. is there any solution to recover all those..??? or is this a permanent problem of nokia c5..?? or whether it is designed to delete all messages after such a number of stored messages..?? pls help..
With regards,
Prasad vinson

Organize by Conversation incorrectly grouping mails with same subject

I'm having a problem with the threaded view - when I create a new email, to a brand new recipient (maybe someone I've never contacted before), if the subject line is identical to some previous email, the new email is automatically added to the "Conversation".
So, for example, I have just sent an email to a client with the subject "Timesheets". After sending it, I see in my outbox that this has been joined to a previous email I sent about 3 years ago to a completely separate client, in which the subject line was also "Timesheets".
Unfortunately, I don't see that this has happened until after I've sent the email, so is there a way to fix this without turning off the "Organize by Conversation" feature altogether?

Time goes on and nothing from Apple
Don't they follow our worries?
I have Mail 6.3 and OS X 10.8.3 - the most updated versions and still the THREADS DON'T WORK as in Snow Leopard mail.
I use mail to work, have hundreds os multiple threads now

JSP type conversion (JSP- PageBean) not working

          We are using page beans extensively, and I had expected that if you have a variable
          of type String passed in the URL (variable name is "id" for example, a unique record
          identifier), and within the page bean declaration you have a setId(int uId){...}
          that the JSP engine will automatically do the type conversion between the String
          and the int.
          I am using WLS6.0 on NT4.0SP5, and whenever I do this I get a
          java.lang.NoSuchMethodError error.
          When I change the method signature to setId(String uId){...} (and change the variable
          types etc. and do the String to int conversion myself), all works fine.
          Does WLS6.0 not support this automatic type conversion?
          Thanks in advance,
          Mils.


Try removing the transient property.
To avoid the duplicate problem, verify, before creating the component if the component is already on the tree.
transient - A flag indicating whether this instance has
decided to opt out of having its state
information saved and restored. The
default value for all standard component,
converter, and validator classes that
implement StateHolder must be false.
By other words -
� void setTransient(boolean newValue)
� boolean isTransient()
Set and get the transient property. When this property is set, the state is not
saved.

How I can save report (graphics & text) in PDF format in LV6i?

I am new to LabView. I tried to save the report as HTML document, it works well using vi's from report generation pallet. But the problem is HTML stores graphic images and text as multiple files. My requirement is to have one single file (like PDF format) to store the results/report of the process.
Any help in this problem will be greatly appreciated.

MattI wrote in message news:<[email protected]>...
> Actually, this is really easy.
>
> Just open the .html file from within Word, and then save it as a Word
> file.
>
> After this, if you have Adobe Acrobat installed, you can create a pdf
> of the Word file.
You could write a batch file that prints to a PS file using a PS
Printer driver and then runs GhostScript to automate the PS -> PDF
conversion. There is no need to buy a MS or Adobe product.
A big of searchign and you'll probably find some ghostscript addon for
HTLM->PS->PDF conversion

Automatic TR to TO conversion

Similar Messages

Maybe you are looking for