Automatically adding user to company

We're looking at using Delegated User Administration with Companies to limit the scope that some administrators have (they will only be able to assign certain roles to members of their company). 
We want all new users to be members of the same company. 
Is there a way to automatically assign a new user to a company?  Users are only created on R/3 using PFCG, not in the Portal itself.
Thanks, Chris

Hi,
I would start here and ask in the relevant Server Community
https://discussions.apple.com/community/servers_enterprise_software
8:20 pm      Thursday; June 12, 2014
​  iMac 2.5Ghz i5 2011 (Mavericks 10.9)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad

Similar Messages

  • Automatically added User rights to LDAP imported Users

    Hi folks
    I'm working on a fresh install of CUCM 10.5.2 with local and LDAP End Users.
    Now I like to add at least End User Rights automatically to the newly imported LDAP Users.
    Even if I add an new local user, I like that they have "Standard CCM End User Rights" added per default, if it's possible.
    Every help is more than welcome. Thank you very much.
    Kind regards
    P.Blumenthal

    Navigate to System -> LDAP -> LDAP Directory and then select your LDAP syncronization agreement. A little more than halfway down the page there is a "Group Information" section where you can assign the "default rights" given to each LDAP user that gets imported.
    Thanks,
    rh

  • IDK automatically adding Everyone group to collab community project

    Hi,
    I deleted Everyone group from the community project members. I tried to read the properties of community project of collab using the IDK. What I observed is IDK call automatically adding Everyone group in the members. Can anybody tell me the reason why its happening.
    Note: I am 100% sure that i am not changing any property of the community project using portal collab ui or using the IDK.

    Hi Juan,
    I just made a test with my Project Online instance and when I create a new user, the team member group is already selected in the user's creation interface. Thus by default, any user will be in the team member group.
    Hope this helps,
    Guillaume Rouyre, MBA, MVP, MCP |

  • Adding users in FDQM

    Hi All,
    I have around 100 users in the system whom i have provisioned in shared services giving Intermediate-2 access in FDQM. I am aware that to add these users in FDQM i have to do it using Administration menu -> User maintenance .
    However, since doing this task (adding user + giving access to locations) is tedious to do for 100 users manually, is it possible to do the same using some kind file upload / automatically with minimal efforts?

    It may help you:
    http://www.youtube.com/watch?v=7C8cI5zc1DM

  • I would like to know whether its possible to start running a vi automatically without user interaction after a system has booted up and launched labview?

    I would like to know whether its possible to start running a particular vi automatically without user interaction after a system has booted up and launched labview?

    > I would like to know whether its possible to start running a vi
    > automatically without user interaction after a system has booted up
    > and launched labview?
    >
    > I would like to know whether its possible to start running a
    > particular vi automatically without user interaction after a system
    > has booted up and launched labview?
    >
    LV doesn't have any sort of Startup folder as we are a little concerned
    about the security issues this brings about. You can specify VIs on the
    command line for LV to open. And VIs can be set to run when opened.
    Combining these features, you wind up using the system's Startup folder,
    placing either a batch file or a shortcut to LV with the command line
    options added to list out the VIs, and finally, set the VI properties
    so
    that the VIs run when opened.
    Greg McKaskle

  • How we can acess GOS to pop up automatically to user from workflow is our a

    we plan to implement invoice verification workflow to start when an invoice is scanned and placed in holder in OAWD. So that workflow will start from then onwards with SAP archive link.
    Please let us know how we can link scanner and SAP Archive link so that we can place the scanned document directly in to OAWD. how we open the image automatically when approver or AP clerk execute the workitem.
    The process we want to follow is
    1. Scan document and place in OAWD
    2 Workflow is started based on the document type of Archive link( we want to use BKPF)
    3 AP clerk receives workitem and execute it. APclerk see the transaction code FV60 to enter document and image of the scan automatically
    4 AP clerk fill the document and park the document.
    5 Workitem is sent to approver based on the rule specified
    6 Approver execute the transaction invoice iamge is opened and sap document is displayed.
    7 Approver check both image and sap docuemnt and take decision
    8 Approver approves document , sap document is posted and ready for payment
    9 If rejected go back to AP clerk.
    Here issue is when user or approver execute the workitem ,how we can open image automatically along with sap screen.
    or how we can acess GOS to pop up automatically to user from workflow is our another isssue

    Hi,
    It is possible to launch the stored image as soon as workitem is executed. You will need to maintain the archivelink customization to display stored document. Check the following link
    [Displaying Stored Document|http://help.sap.com/saphelp_erp2005vp/helpdata/en/4f/993685446d11d189700000e8322d00/content.htm]
    Hope this helps
    Cheers!!!
    Samanjay

  • I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    I have all my music on my external hard drive when I try to add it to iTunes it is automatically added to my MacBook Pro's hard drive. How do I stop this from happening? I just want the music to stay on the external hard drive. Thanks!

    This is true of course, but doesn't cover the situation where some files are in the iTunes Media folder and others are on an external drive. In my case I keep my music in the Media folder and all my films on an external drive (there are too many to have on the internal drive). In iTunes 11, and before, it was easy to add those external files by holding down the alt/opt key while dragging to the sidebar. In iTunes 12 this is no longer possible. There are several workarounds: use TuneSpan to move the file after it's been added; delete the file from the Media folder and empty the trash then use iTunes Get Info which will report the file is missing and allow you to locate it; constantly switch the Add to iTunes toggle on and off as required. All of these require a lot more work than just holding down the alt/opt key while adding.
    It constantly gets harder.

  • What is the difference between using the command "dsmgmt" and the "Managed By" tab when adding users to the local administrators Account on a Read-Only Domain Controller?

    When I use the
    "dsmgmt" command to add a user to the local administrators account of a RODC I can actually see the user when I use the "Show Role Administrators" parameter. However, I can't see the members of the
    group added to the "Managed By" tab of the RODC object in AD. Even though, the users added using
    "dsmgmt" and by the "Managed By" tab can all log in locally and have admin rights to the RODC. Are there any differences between these two ways of adding users to the local administrators account? 

    Hi,
    For groups, managedBy is an administrative convenience to designate “group admins”. Whatever principal listed in
    managedBy gets permission to update a group’s membership (the actual security is updated on the group’s AD object to allow this).
    In Win2008 and later managedBy also became the way you delegated local administration on an RODC, allowing branch admins to install patches, manage shares, etc. (http://technet.microsoft.com/en-us/library/cc755310(WS.10).aspx). 
    On the RODC, this is updating the RepairAdmin registry value within RODCRoles.
    So the difference between them should be only the way they do the same thing.
    For more details, please refer to the below article:
    http://blogs.technet.com/b/askds/archive/2011/06/24/friday-mail-sack-wahoo-edition.aspx
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • How do I duplicate layers & groups without automatically adding a "copy", "copy 1", "copy #" at the end of the new group?

    How do I duplicate layers & groups without automatically adding a "copy", "copy 1", "copy #" at the end of the new group?
    It's been pestering me for quite a while now, since I often work with the same elements over and over again. Its frustrating to have to change the name of each layer manually, especially if I'm copying a whole group.
    Is there a setting in Photoshop or perhaps an external script that can help fix this for me?
    Cheers,
    Qiming

    There is no way to defeat this within the program itself. Here's the workaround:
    Duplicate the file (from the Image menu).
    Drag the Group or layers from the Layers list from the duplicate to the image window of the original , while holding down Shift.
    That will make a "copyless" copy and reposition the copyed material in the exact same position it was on the original.

  • Error while Adding user to  'SunAccessManager' Resource

    Hi,
    I configured SAM Resource adapter in SIM 6.0. When I create a user and assign SAM Resource getting the following Error,
    com.waveset.util.WavesetException: An error occurred adding user 'uid=SIMUser2,ou=People,o=Employee,dc=nl,dc=dap,dc=com' to resource 'SunAccessManager'. com.waveset.util.WavesetException: An error occurred creating user. java.lang.IllegalArgumentException: Invalid parameters
    Pls help me to resolve this issue
    Thanks,
    Deva

    Hi Satish,
    The problem is that you added the table and the objetc that you used to add the table is not freed properly. You need to free the object and then the reference count to that table will be 0 - which will enable you to add the fields
    e.g
    Dim pUTables As SAPbobsCOM.UserTablesMD
    'Do your stuff
    Set pUTables = Nothing
    Dim pUFields As SAPbobsCOM.UserFieldsMD
    'Do your stuff
    Set pUFields = Nothing

  • I don't accept cookies except from "Exception" domains. However, it seems that any site that want to set a cookie is automatically added to my list of "Exceptions". Why is this?

    I have "Accept cookies from sites" unchecked. I have a list of exceptions for domains that I allow to set cookies. However, it seems some site not on my exception list are automatically added to my list when they want to set cookies.
    Why/how is this happening?

    Hello cor-el, thanks for your reply. I changed my settings for downloads to desktop and it has appeared on there. When I double click I am asked which program I want to open file. I click firefox and another box "opening install" says I have chosen to open the file which is an application and do I want to save it. This is the only real option so I press save file. I get a box saying this is an executable file which may contain viruses - do you want to run. I press ok and the final box showing C drive file name and desktop appears stating application not found.
    This happens the same whenever I try to install.
    To my untrained eye the application is not being recognised as an application and I cannot work out how to get it to do that.
    My plugin is still showing as out of date.
    Is there anything you could suggest. Thanks for your time.

  • Automatically add user to a specific database based on the users title

    Is there away to automatically distribute users to a database based on their title?  My organization has different quotas depending on your job title, so if you are an Outside sales rep you get a 2 GB mailbox, and if you are a Inside sales rep you
    get a 1GB mailbox.   

    You can do that with cmdlet extension scripting agent. You need to do some custom setup but there are some examples in below articles (specially part 3)
    Understanding the Scripting Agent
    Cmdlet Extension Agents (Part 1)
    Cmdlet Extension Agents (Part 2)
    Cmdlet Extension Agents (Part 3)

  • How do I stop itunes from automatically adding songs into my itunes library?

    I want to disable itunes from automatically adding songs into my library.  Every time I sync up my ipod I'm finding miscellaneous debris on it that itunes keeps importing into it.  Theres got to be a way to disable this function but I can't seem to find it in the preferences.   I'm using a 2011 macbook pro with os x 10.6.7. 

    I figured out how to change itunes as my default player.  I did this by selecting a new audio file and hitting cmd and I to get info, then I selected the "open with" category.  Inside "open with" theres an option to open the file with quick time, underneath that is the "change all" option.  select that and you will solve this problem if this is a nuisance to anyone else.

  • Save a pdf file without Adobe automatically adding "-Copy" to the end

    How can I save a pdf file without Adobe automatically adding "-Copy" to the end of file name?

    If you have actually made any changes (e.g. adding a Sticky Note or filling out forms), the Save button will appear in the bottom toolbar.  It will save it as the same name.
    "- Copy" is added only when you tap/click the Save As button.  You can change it to something else, if you'd like.

  • How do i change over from automatically adding songs to manually adding

    Using 2 ipods on the computer and don't want all of the other person's songs. How can i change from automatically adding songs to manually managing the songs that go on to the ipod. If i plug it in, i'm afraid that i will mess up all my current songs on there. Please help.

    Here are the instructions as they are written in the IPod PDF manual:
    In iTunes, select iPod nano in the source list and click the Summary tab.
    2 In the Options section, select “Manually manage music and video.”
    3 Click Apply.
    Note: When you manage songs and video yourself, you must always eject iPod nano
    from iTunes before you disconnect it.
    To add a song, video, or other item to iPod nano:
    1 Click Music or another Library item in the iTunes source list.
    2 Drag a song or other item to the iPod nano icon in the source list
    Hope this helps you.

Maybe you are looking for