Automatically fill "system" tab in CUA

Hello,
In a CUA landscape, do you know if this is possible to fill automatically the system tab in the user master data with default receiver system ?
The reason is that we are using the bapi_user_create bapi to create users and it seems not to fill the system tab
Best Regards, Manuel

Hello S,
using the low level functions is a bit dangerous, as SAP provides a standard bapi for system assignements.
It is called BAPI_USER_SYSTEM_ASSIGN. Please refer to SAP note #992375.
b.rgds,
Bernhard

Similar Messages

I purchased my iMac used. When I try to update my apps the computer automatically fills in the previous owner's Apple ID and I can't change it. Any ideas?

I purchased my iMac used. When I try to update apps in AppStore, the computer automatically fills in the previous owner's email address and it won't let me delete it to enter mine. I have been using my own apple ID and password on this computer for other things without a problem. Any ideas?

Before buying a second-hand computer, you should have run Apple Diagnostics or the Apple Hardware Test, whichever is applicable.
The first thing to do after buying the computer is to erase the internal drive and install a clean copy of OS X. You—not the original owner—must do that. Changes made by Apple over the years have made this seemingly straightforward task very complex.
How you go about it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
It's unsafe, and may be unlawful, to use a computer with software installed by a previous owner.
1. If you don't own another Mac
a. If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller—not from eBay or anything of the kind. If the machine is very old and has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
b. If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for a MacBook Air. You should have received the media from the original owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To start up from an optical disc or a flash drive, insert it, then restart the computer and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
c. If the machine shipped with OS X 10.7 or later, you don't need media. It should start up in Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
d. Some 2010-2011 models shipped with OS X 10.6 and received a firmware update after 10.7 was released, enabling them to use Internet Recovery. If you have one of those models, you can't reinstall 10.6 even from the original media, and Internet Recovery will not work either without the original owner's Apple ID. In that case, contact Apple Support, or take the machine to an Apple Store or another authorized service provider to have the OS installed.
2. If you do own another Mac
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to prepare a USB device, then start up the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can start from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
3. Partition and install OS X
a. If you see a lock screen when trying to start up from installation media or in Recovery mode, then a firmware password was set by the previous owner, or the machine was remotely locked via iCloud. You'll either have to contact the owner or take the machine to an Apple Store or another service provider to be unlocked. You may be asked for proof of ownership.
b. Launch Disk Utility and select the icon of the internal drive—not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
c. An unusual problem may arise if all the following conditions apply:
          OS X 10.7 or later was installed by the previous owner
          The startup volume was encrypted with FileVault
          You're booted in Recovery mode (that is, not from a 10.6 installation disc)
In that case, you won't be able to unlock the volume or partition the drive without the FileVault password. Ask for guidance or see this discussion.
d. After partitioning, quit Disk Utility and run the OS X Installer. If you're installing a version of OS X acquired from the App Store, you will need the Apple ID and password that you used. When the installation is done, the system will automatically restart into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
e. Run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the original owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed—you have to repurchase them.
4. Other issues
a. If the original owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're irrevocably linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Mac App Store Customer Service has sometimes issued redemption codes for these apps to second owners who asked.
b. If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.
c. When trying to create a new iCloud account, you might get a failure message: "Account limit reached." Apple imposes a lifetime limit of three iCloud account setups per device. Erasing the device does not reset the limit. You can still use an iCloud account that was created on another device, but you won't be able to create a new one. Contact iCloud Support for more information. The setup limit doesn't apply to Apple ID accounts used for other services, such as the iTunes and Mac App Stores, or iMessage. You can create as many of those accounts as you like.

When signing in after I get my e-Mail address in the block how can I get my password to automatically fill in?

When signing in to the internet using Firefox when I type in the first letter of my e-mail address it brings up the entire address which I click on an it fills in the blank. On my laptop at this point when it fills in the e-Mail address it automatically fills in my password; however, on my desktop it does not fill in the password, I have to type it in. I use Firefox on my laptop also so I don't know why it works on one system and not on the other.
Thank you for your consideration.
Sincerely,
Richard Jakubec

You should try addon like Lastpass, read more about it here
* lastpass.com
download Lastpass from here
* https://rodan.lastpass.com/lp_win.xpi

Help with "Automatically fill empty space on ipod" Function in itunes

I am having an issue I don't understand when trying to sync my ipod. I go into the "music" tab where it allows you to select the music you want on the ipod. In addition to selecting playlists, artists, genres, etc. there is a box you can check that says "automatically fill free space with songs." I select a playlist with only a few albums on it which leaves me with a good deal of free space. My assumption was that checking this box would RANDOMLY choose songs (or albums?) in itunes to fill up the free space. However, when I do this it fills up the free space with the *exact same songs/albums every time*! The only thing I have checked off is the 1 playlist so I don't understand why it keeps choosing the same albums and songs to fill up the free space. I want it to just randomly choose songs from my entire music collection to fill up the free space. any help is appreciated!!

Also, it seems that iTunes is not smart enough to -remove- songs when you add something new, i.e. movies or podcasts, and will constantly tell you that the iPod is full. That results in having to un-check the option, remove every song 'automatically added', add the new content, then re-check the "fill free space" box. Did no one actually test this feature or is it done on purpose to wear out your iPod quicker?

Automatic Filling of same fields

Hello All I am new to this and I am trying to create a form on Lifecycle. The form I am creating has 3 pages and 2 of those are identical. The 2 identical pages have to have the same data in them. How can I get it set up so that when the uder inputs information on the first page that same info automatically fills in on the sacond page in the same fields. Thanks...

Set the binding tab on those fields to Global and make sure they have the same name.
Or you can programmaticaly push the values from the 1st fields into the 2nd ones. Use the exit event of the 1st field and this javascript code:
Field2.rawValue = Field1.rawValue;

Why is my computer automatically filling in with dashes before I can sign in?

My computer is a HP Pavilion A6600F, Windows 7 64 bit, and recently when I turn on the computer it automatically fills in the sign in areas. I have had to hit enter twice before I can sign in. Some times when I want to do a search for something it will fill that area with dashes and won't allow me to stop it. I have had to go through all types of changes to get it to operate right. This started just recently after I moved. Could it be something loose or do I have to call in a specialist?
This question was solved.
View Solution.

adagarner wrote: My computer is a HP Pavilion A6600F, Windows 7 64 bit, and recently when I turn on the computer it automatically fills in the sign in areas. I have had to hit enter twice before I can sign in. Some times when I want to do a search for something it will fill that area with dashes and won't allow me to stop it. I have had to go through all types of changes to get it to operate right. This started just recently after I moved. Could it be something loose or do I have to call in a specialist?
Hello adagarner, You might try going back to a Windows Restore Point before this issue presented itself.
Go to the Start Orb, All Programs, Accessories, System Tools, System Restore. Click on the item System Restore and the Windows System Restore window should open. It may take a few seconds for this to open.
Then look for a System Restore Point before the issue occured.
The system should reboot and the system will boot back to the normal desktop and a message will appear that advises the system was successful or that Windows was unable to restore the system.
Sometimes this works and other times not, but may be worth a try.
Please click the White Kudos star on the left, to say thanks.
Please mark Accept As Solution if it solves your problem.

Automatically fill free space with songs

When I am syncing music to my iphone, and I check the box that says "Automatically fill free space with songs," how does itunes determine which songs it puts on my phone? Can I prevent it from placing unchecked songs in my library on my phone?

Ah, it looks like the solution is here:
http://discussions.apple.com/thread.jspa?messageID=12209799&#12209799
And involves going to the summary tab, selecting "manually sync music" then deleting all of my songs and resyncing. That shouldn't take more than 45 minutes. I'll report back if it works.

"Automatically fill free space with songs" omits half my music

This is a bizarre bug that I can't figure out. The "Automatically fill free space with songs" option on both my iPods and my iPhone will only select from songs that were in my iTunes library as of November 2009, about 7 months ago. I know this because I began importing a large portion of my CD library at about that time, and have been expecting to be hearing some new material (like the entire Beatles box set). Instead, I'm getting replays again and again of songs that I know were in there from before 11-09.
Newer songs can definitely be imported as members of a synced playlist.
I tried a complete rebuild of the iTunes library files -- all that did was screw up my Smart Playlists and reset my "Date Added" field for all songs.
Does anyone have any clue on this?

Ah, it looks like the solution is here:
http://discussions.apple.com/thread.jspa?messageID=12209799&#12209799
And involves going to the summary tab, selecting "manually sync music" then deleting all of my songs and resyncing. That shouldn't take more than 45 minutes. I'll report back if it works.

Automate filling a PDF Form

Hi All
I have Adobe acrobat Standard installed on my system and i want to automate filling a PDF Form.
While doing this am not able to get any of the field names. Here is the peice of code i used, can any one help me out what i need to do?
Set AcroExchApp = CreateObject("AcroExch.App")
AcroExchApp.Show
Set AcroExchAVDoc = CreateObject("AcroExch.AVDoc")
OK = AcroExchAVDoc.Open(Filename,"")
Set PDDoc = AcroExchAVDoc.GetPDDoc()
Set jso = PDDoc.GetJSObject
Set AFormAut = CreateObject("AFormAut.App")
Set Fields = AFormAut.Fields
'Set f = jso.getField(FieldName)
For Each Field In Fields
      FieldName = Field.Name
      Set f = jso.getField(FieldName)
      f.value = "Hello"
Next
Here am not able to enter into the loop.
One more thing when ever i get Field name using Field.Name method i want to high light that particular field. Is any one has any kind of method for highlighting all the fields.
Thanks in Advance..

Hi,
If you set the font size of the text field value (not the caption) to zero then the text will shrink to fit. This can be set in the font palette. But this can reduce the text so small that it can't be read. If you are developing a dynamic form then you can set the text field to expand to fit (in the layout palette), just make sure the containing subform is set to flowed, when the user exits the field it will expand to fit all text.
Regards
Bruce

"Automatically fill free space with songs" keeps putting me over capacity

Hi,
When I select "Automatically fill free space with songs" my ipod touch then goes over capacity by .01gb.
So I unclick "sync photos" to free up some room and the same thing happens.
Then, I deleted a bunch of apps I wasn't using. I sync with "Auto-fill" unselected, then turn "auto-fill" back on, and it says I am over capacity again.
Any tips on this? Thank you!

Ah, it looks like the solution is here:
http://discussions.apple.com/thread.jspa?messageID=12209799&#12209799
And involves going to the summary tab, selecting "manually sync music" then deleting all of my songs and resyncing. That shouldn't take more than 45 minutes. I'll report back if it works.

Auto fill system date

I'd like to be able to have the system date (YYYY MM DD format) automatically fill in a date field.
Also this data should stay fixed if the PDF is saved. For example, the user fills in the form and saves a copy with the system date of that day. However when the user re-opens the PDF next week the original system date should still be there (not replaced by the current system date).
Can any provide me with the code to do this? Thanks.

Bet,
The javascript that you will need is:
if (DateTimeField1.rawValue == null)
Now = new Date();
DateTimeField1.rawValue = Now.getYear()+1900 + "/" +(Now.getMonth()+1) + "/" + Now.getDate();
Note: The DateTimeField1 has to be readonly type. This will prevent the users from modify the value in this field.

Material desc automatically filled when enter material number using SM30

Hi all,
I have created Z table with fields material number(MATNR) and material description. Iam maintaing table using SM 30 transaction. If I enter material number the material description automatically filled when press enter button.
Is there any solution for this
Thanks
Sudarsana

Hello,
whenever you create a maintainance for a table an SAP program is generated which will have the name SAPL(name of the function group to which the table is assigned)....you can go directly to the program inside SM30 by clicking on the top menu -> system -> status ->program name and screen number
inside SM30 go to the screen where you have to see the description(based on 1step and 2step ) and note the screen number and program name
once you go the program -> go to the particular screen -> and confirm the screen
inside the PAI or PBO
write the code :
if Material number is not initial.
select and put material description into the screen field for text.
else.
clear the value for text in screen field
endif.
Disadvantages : whenever you create a new maintainance by using the table maintainance generator the code is over written
solution:the screen code will be always over written..but inside the SAPL program when you create the PBO/PAI make an include and save it...when regenerating the include will not be over written but you will have to go to the screen flow logic and give the name of the PBO/PAI modules
A table once finalised will not require regenerating the maintainance again but this is a draw back ...but the solution just provided is the widely accepted and followed one
Reward if useful
Regards
Byju

Disc.base field automatically filling in FB60 or F-43.

Hi,
Why System automatically Post the amount in Dis.Base field, actually i maintain all parameters in vendor master record. (Ex: if i post transaction in FB60 that automatically fill the Disc.base field also.)

See the below
Amount Eligible for Cash Discount in Document Currency
Definition
Part of the invoiced amount for which cash discount is granted. The amount is always in document currency.
Procedure
During document entry, the amount qualifying for cash discount can be determined manually or automatically. The amount is determined automatically if no entry is made or a '*' is entered.
To determine this amount automatically, the system takes into account the offsetting items relevant to cash discount for the invoice item and the rules assigned per company code for processing cash discount and taxes.

Automatic fill/replace text field

Hello all,
In my document, I have a text block with the following:
Document: 770-00009                                                      - Static line
April 1, 2014 6:42 AM                                                     - InDesign system variable line
For single or dual switch installs                                      - Static line
For build # ${build_version}                                             - This line changes and need a way to automatically fill-in/replace the text, "${build_version}"
So, I am looking for a way to automatically replace ${build_version} with the current version number.
Is there a way to do this from InDesign, via CLI (don't think InDesign has one), via the .indd file, or perhaps at the PDF stage (although, at that point, it would have to be Linux based).
Thank you

This is in Safari?
Go to Preferences->Autofill and see the "Other forms" section. Choose "edit" and you can modify or remove the data. If you remove it, the next time you fill it should enter the right info. Go ahead and investigate each of the 4 options on the Autofill pane.

How can I prevent Firefox from automatically filling in my passward in every site I visit? I have NO security now when others use computer.

Everytime anyone on this computer goes to my AOL or YAHOO email, Firefox automatically fills in my password and whoever is using my computer can read my email or check bank balances or anything else. I have just started using Firefox and now have NO security. Can anyone help me change the security settings?

Also, make sure you have a password on your user account - if you share a computer without separate Windows accounts, they have access to all your information regardless of whether you stay logged in or not, and regardless of whether passwords are saved or not. Make everyone else use the guest account or their own limited account.

Automatically fill "system" tab in CUA

Similar Messages

Maybe you are looking for