Availability check with reservation transfer

Dear all
I have a problem with availability check.
Reservation transfer, generated from processing MRP (from MRP area Z002 to MRP Area Z001).
Availability check doesn't consider reservation transfers generated from processing MRP.
if fixed the requirement, simply by saving for example, the availability check works. Of course, if I create it manually (MB21) works.
This behavior is normal?
many thanks!

Similar Messages

Sales order Availability check for Reservation

hi ,
When i create a sales order , it should check the availability also reserve the required quantity for the order
automatically. pls let me know the step by step process
mohan

Hello,
Availability check with ATP logic can only promise the amount of stock that can be delivered to the customer on a particular date, it cannot reserve the stock until the order the saved. But once you save the order the stock allocation is done automatically.
Availability check is an integral part of the business process that determines if the required delivery quantity can be met on a required delivery date.
For this purpose the system takes into account pre-delivery activities such as scheduling for picking or packing times and the time taken to produce or obtain the material.
It also performs several background functions such as Backorder processing, rescheduling and ATP quantities.
The system will not allocate or reserve any stock of items until the order is saved.
REWARD POINTS IF HELPFUL
Regard
Sai

Availability check with atp

hello friends,
please send any body "Availability check with atp" configaration steps.
mail id "[email protected]"

hello friends,
please send any body "Availability check with atp" configaration steps.
mail id "[email protected]"

Availability Check with ATP Logic or Against Planning-reg

hi gurus,
what is the difference between
Availability Check with ATP Logic
or
Against Planning
means can we have two types of check?
how can we do against planning?
rajendra

Hi Prasad,
I think it would not possible to maintain to procedures at the same time for single material.
availability check against ATP is allowcation of material based on certain rules like which we set under basic functions - AC.
In this process you cant allocate the stock for specific customer.
In case of AC against planning you can allocate each and every material along with qty to specific customers.
Please see the configuration required for planning.
1. Allocation Procedure (OV1Z) the product allocation procedure is the parent of the entire allocation process. All materials that are to be included in the allocation scheme are required to have an allocation procedure assigned to it in the material master. In addition, as of release 4.0, it is in the procedure that the method of allocation is defined. The user has the opportunity to set an indicator to identify their choice of two different methods (discrete and cumulative allocation) to evaluate the quantities to be considered for product allocation.
2. Allocation Object (OV2Z) the allocation object is the root level of the allocation process where actual data is entered and planned in LIS. The object allows the user to further break down a procedure into smaller parts for future validation of components comprising a specific material
3. Allocation Hierarchy Mapping (OV3Z) Primarily, this transaction permits the assignment of an allocation procedure to an LIS information structure. Secondly, a character is assigned to the information structure to permit collective planning. Finally, the user can assign a step level to the procedure and information structure to sequence the order in which allocation quantities are checked. This functionality allows the user the opportunity to check product allocation against several product allocation scenarios, before the required quantity is confirmed
4. Define Consumption Periods (OV5Z) The allocation consumption periods functionality is only valid if the allocation method flag has been set (OV1Z). If you have de-selected the method field, this functionality is not available. The consumption window indicates the number of past and future periods to be used in the allocation check.
5. Control Product Allocation (OV4Z) In order for the allocation process to function properly, allocation control records are created primarily to map allocation procedure steps to their corresponding objects so that the allocation data records can be located for validation. Secondly, validity periods must be established to indicate when the allocation control records are active. Finally, the user has the option of establishing a conversion factor per allocation control record to accommodate BOM listings of constrained materials
6.Activate Allocation for Requirement Class (OVZ0) In order to turn on allocation in the standard order processing functionality, the requirements class must have a flag indicating that allocation is relevant.
7. Activate Allocation for Schedule Line Category (OVZ8) In order to turn on allocation in the standard order processing functionality, the schedule line must have a flag indicating that allocation is relevant
8. Create Planning Hierarchy (MC61) In order to adequately establish allocation quantities, the user must initially determine the level at which the allocation is to take place and the aggregation factor of the allocation quantities. In this step, the levels for the collective allocation search procedure are also identified.
9. Generate Masking Character (OV7Z) Upon completion of the level determination for the planning hierarchy, the collective allocation masking character must be generated to allow aggregation indicators to be established. This transaction simply reads the hierarchy established in the planning table and then generates a collective mask character for each level of the hierarchy
10. Modify Planning Hierarchy (MC62) This step is a repeat of MC61 where the initial hierarchy was established. In order to complete the hierarchical set up, the collective allocation (mask character) hierarchy must now be maintained with the appropriate aggregation factors
11. Allocation Procedure Assignment to Material Master (MM02) At the root level of the allocation process are the materials. Each material that is to be considered in allocation scenario must be mapped to an allocation procedure. In order entry, then, when a material is entered with a valid allocation procedure in the material master, the allocation data is verified prior to confirming the line item ordered
12. List of Suitable Structures (OV9Z) This report is used to identify potential LIS information structures that can be used in the product allocation process. This report simply reads through the data dictionary and selects all the active information structures that contain the field product allocation object (KONOB) as the first field. This data can then be utilized in the mapping transaction (OV3Z) to link the allocation procedure step to an information structure (previous step).
Reward if helpful.
Regards
Raj

About Available check in reservation

Dears,
I set a dynamic available check for creating reservation(MB21) and Goods Issue(MB1A, M-TYPE:201). In checking scope, I only check reservation as requirements and the current available stock.
The system logic is as followed:
when I was creating a reservation, the system will check the current available stock ( total unlimited stock minus total requirements from reservation), if the available stock satisfied the requirement from reservation, the system will confirm the quantity for the reservation, as a result, the available stock will be deduced. then when the available stock can't satisfy a reservation, the reservation can't carry out all the goods issue in the reservation.
Here is my question:
To simplify the senarios, provding that the current stock is 0 for a material. then I create a reservation A for the material, the required quantity is 3. The available stock is 0, and no quantity was confirmed.
Then I increase the stock of the material from 0 to 5. The available stock is 5.
I create another reservation B for the material with required quantity as 3. then the available stock deduced from 5 to 2. It didn't calculate the requirement of the reservation A.
From the system view, I understand the system's logic, but what I want to achieve is to calculate all the requirements for the material, that is , when a new reservation is created, it should calculate the requirements(such as reservataion A ) that were not included in avaiable check previously.
With the example above, could I reset the confirmed quantity to 3 for the reservation A when there is enough available stock(such as) and deduce the available stock.
Thanks for your reply.
Zhongkai

Hi,
I can understand the problem...but sorry to say...its not fesiable , bcoz, the first time when you do the availablity check, if there is no req.qty available, then the reservation will not be granted...so you have to try again after some time...
This is not possible because if the reservation is accepted even after there is no availability then who knows thatwhen there will be next delivery available...and whether it will be possible to provide you material on time...
So it wrong...
Regards,
Priyanka.P
AWARD IF HELPFULL

Availability check with Purchase Requisition / Production Or

Hi,
I want to configure the availability check in such a way that, system should first check the stock available. If there is no stock system should generate the Purchase requisition or Production order.
Can you tell me the solution on the same.
Regards
Rahul

Hi,
We have the similar requirement & achieved through development.
Eg: M1- stock = 55 ea
order qtty M1- 100
system confirms for 55 ea & remaining qtty, seperate line item will be created with TAB item category i.e. 45 ea.
Used FM: AVAILABILITY_CHECK ( MV45AFZZ) & BAPI_MATERIAL_AVAILABILITY to find the ATP stock in Include:MV45AFZB
Regards,
Reazuddin MD

Availability check during reservation - MM

Hi Gurus,
We need to do availability check during the creation of reservation. The check to be made is like this,
The reservation quantity should be lesser or equal to sum of unrestricted stock plus all other open reservations.
If the above condition fails, issue an error message and not allow to create reservation.
I did create new checking rule, checking group and checked the required (may be missing something here) objects to be checked in config, but I still able to create reservation. No error message is displayed.
Gurus, could you send me a step by step for availability check? Also, need to issue a custom error message.
Thanks for your help.
Regards,
Sundar.

Hi
Go to transaction OMB1, there you will four options;
1. Movement Type
2. Checking Rule
3. Define Checking Rule
4. Transaction Code
Go to Movement Type & put Dynamic Availabilty Check either "B" or "F" against the movement type you want.
& accordingly go to checking rule & then go to Define Checking Rule of yours.
& then go to Transaction Code & the created Checking Rule to the Transaction Code MB21 & MB22.
Hope this solves your problem.
Reward points if useful.
Regards
Irfan

Availability check with storage location

Hi experts,
I have one problem in availability check.I will explain in steps.
There are two storage locations
RMMU: main storage location where GR will happen from vendor.
WPMU:WIP storage location from where material will be issued to production order.
A is fert material.
B is bom item (raw material) and in material master maintained WPMU production storage location.
Now after sales order(100 nos) and after mrp run we will get the Planned order for 100 nos and Purchase requisition for 100 nos for material B.Now we will do the GR for "B" in Storage location RMMU.
Now we will create the Production order for ''A''.After availability check in production order ,it will show the material availability.
The problem is that we maintained the prod.storage location as "WPMU''and in that no stock is there.It is in RMMU.Still it is giving availability of material.
Requirement is it check the stock in prod.storage location i.e. WPMU
Please throw some light on it.
Thanks in advance.
Regards
VILAS

Find out your checking rule maintained in Order Control OPJK for your order type and plant combination for both
Create(1) and Release purpose.
Then in t.code OPJJ and for that Checking rule and Checking group combination(Maintain in material Master) go to detail screen and don't activate check box for No Storage location inspection.
In this case system will check the available stock in Production storage location only.If it is not maintain then system will check at plant level in all storage locations.
If production storage location is not maintained either in material master or in BOM then maintain it.
karthick

Mass availability check for reservations created manually

Hi,
Please let me know if there is any transaction for mass availablity check for reservations created manually.we can check avaialabilty for individual reservations in mb21 or mb22.but we need a collective availabilty check feature.
Thanks for the help inadvance.
Regards
Krishna

Thansk a lot for your quick response.I could not find the option for availabilty check in MBVR.could you please explainn me how to see this.
Regards,
Krishna

Availability check with Packing Instructions

Hi everybody:
Is possible to check the stock availability with Packing Instructions?
And if the answer is yes, what I need to do for?
I have PP, SD and MM(inventory management) I don't have WM.
Is there an special configuration in the IMG?
Thanks in advance
Omar Perea
Edited by: Omar Perea on May 15, 2009 12:46 AM

Hi everybody:
Is possible to check the stock availability with Packing Instructions?
And if the answer is yes, what I need to do for?
I have PP, SD and MM(inventory management) I don't have WM.
Is there an special configuration in the IMG?
Thanks in advance
Omar Perea
Edited by: Omar Perea on May 15, 2009 12:46 AM

Availability check with MRP area at Sloc level

HI We have MRP area at storage location level maintained for materials. Stock exists in the plant in the storage location which is part of the MRP area.
Now when I create STO and try to create delivery for the same, system is giving message 0 stock available and not creating delivery. Material has 02 Avl Chck group.If I deactivate the MRP area in the material master, it allows creation of delivery.
How can I ensure that system creates delivery even though stocks exist in MRP area relevant sloc only in the plant?
Sriram

I am sure you have already moved on from this issue, but what you mention is a limitation prior to ECC 6. You can not identify on the purchasing document the source sloc of the supplying plant. This is why you can not create the STO between sloc MRP areas. I was told this was resolved in ECC 6.
Jon

Collective availability check stock transfer PO

Hi,
I'm looking for a transaction in order to do a collective availability check to stock transfer PO.
Is it possible? Can i have a missing parts reports with all the stock transfer PO??????
Thanks

Rakesh,
Here is how the system will behave.
Product A requires X and Y. For making A = 1000 EA, we need X = 1000 EA and Y = 1000 EA.
Stock of X = 1000 EA in unrestricted use. Stock of Y = 500 EA in unrestricted use.
Assumption:Scope of check will consider only the available on hand inventory
If we run MDVP, the committed qty for A will be 500 EA because it will consider the maximum possible qty that can be made with available stock.
In MF60, for both X and Y the reserved qty will be 500 EA. The balance 500 EA of X will not be reserved for this planned order because, it will not be of any use until you receive 500 EA additional of Y. System will have it open for other planned orders if any.
Hope this helps.
Saravana

Exclude stock reserved for production order from availability check

Hi Experts,
We have a problem in the availability check.
There is a material used as selling product and components in the same time.
When the material has been reserved completely for a production order, the new sales order still get confirmed despite there is no physical stock at all!
Please advise how to exclude the stock reserved for production order from the availability check in sales order? Many thanks!
Regards,
Qiang

Go to MM02 and check what availability check is maintained for that material. Next go to OVZ9, select that available check with the combination "A" and maintain "X" or "F" in the field "Incl.production orders".
thanks
G. Lakshmipathi

Make to order availability check scenario with production order

We have a make-to order scenario where we build custom products for our customers.
In SAP, we specify a strategy group so a production order is automatically generated when an sales order item is entered. However, we sometimes create a small amount of stock, in anticipation of an order. I would like the system to first check available stock in the system, beofre proposing a production order.
Is something like thi spossible thru configuration of the strategy group, or perhaps another method?
Regards
Ken

Hi,
In SPRO->Sales and Distribution->Basic Functions->Availability Check and Transfer of Requirements->Availability Check->Availability Check with ATP Logic or Against Planning->Carry Out Control For Availability Check
Select the Availability check and the Checking rule combination of intrest and if you select the details,here you define that stocks that are to be considered during availability check.

Error in va01 for transfer of reeqirement and availability check

hi every one when i have done TOR and availabilty check configuration it is not reflecting in va01 can any one help out with configuration step by step

HI
Kindly check the Google with Same text so you can find out so many documents which is related to Availability Check & TOR
Coming to your Question , try to check the Schedule line Category (VOV6) , you need to TICK the Field *"Availability" * Requirement/Assembly"*
and also kindly check the Below
link [Availability Check (ATP) and Transfer of Requirement (TOR)|http://wiki.sdn.sap.com/wiki/display/ERPLO/AvailabilityCheck(ATP)andTransferofRequirement+(TOR)]
[Available to Promise (ATP)|http://wiki.sdn.sap.com/wiki/display/ERPLO/AvailabletoPromise+(ATP)]
Regards,
Prasanna

Availability check with reservation transfer

Similar Messages

Maybe you are looking for