Avoid multiple paths rpd

Hi,
i've following problem. I've 3 tables: A , B, C. In my Business Model Diagram they are mapped as:
A->B
A->C
Now i must insert an additional mapping B->C.
When i save rpd it gives me following error:
Multiple paths between A and C. How can i avoid this cycle?
Thanks
Giancarlo

Hi Diney,
thanks for your reply. Following your suggestions, error message is disappeared, so i believe your reply was right. But now i have another problem that i explain in another post. I hope you can help me even in it
Thanks
Giancarlo

Similar Messages

Avoid multiple paths rpd part II

Hi,
after resolved "Multiple paths" problem, i explain you subsequent error message that Administration tool gives me.
I have following mapping:
I have following tables:
Entity (DIMENSION) - Entity_Relationship (DIMENSION) - HFM_Inventory (FACT TABLE) - HFM_Inventory (ALIAS) (FACT TABLE), HFM_Financial (FACT TABLE), HFM_Marketing (FACT TABLE) - HFM_Receivables (FACT TABLE).
My mapping in Logica Business Model is:
Entity -> Entity_Relationship
Entity -> HFM_Inventory
Entity -> HFM_Financial
Entity -> HFM_Marketing
Entity -> HFM_Receivables
Entity_Relationship -> HFM_Inventory (ALIAS)
When i link Entity_Relationship -> HFM_Inventory (ALIAS) , Global Consistency gives me following error:
Logical Table HFM_Financial has no a proper primary key defined. But in my opinion it's obvious because it's a fact table and not a dimension. What is wrong in my mapping?
Thanks
Giancarlo
Edited by: 832596 on 12-mar-2011 4.19

Hi Diney,
thanks for your reply. Following your suggestions, error message is disappeared, so i believe your reply was right. But now i have another problem that i explain in another post. I hope you can help me even in it
Thanks
Giancarlo

3-1674105521 Multiple Paths error while using Bridge Table

https://support.us.oracle.com/oip/faces/secure/srm/srview/SRViewStandalone.jspx?sr=3-1674105521
Customer Smiths Medical International Limited
Description: Multiple Paths error while using Bridge Table
1. I have a urgent customer encounterd a design issue and customer was trying to add 3 logical joins between SDI_GPOUP_MEMBERSHIP and these 3 tables (FACT_HOSPITAL_FINANCE_DTLS, FACT_HOSPITAL_BEDS_UTILZN and FACT_HOSPITAL_ATRIBUTES)
2. They found found out by adding these 3 joins, they ended with circular error.
[nQSError: 15001] Could not load navigation space for subject area GXODS.
[nQSError: 15009] Multiple paths exist to table DIM_SDI_CUSTOMER_DEMOGRAPHICS. Circular logical schemas are not supported.
In response to this circular error, the developer was able to bypass the error using aliases, but this is not desired by client.
3. They want to know how to avoid this error totally without using alias table and suggest a way to resolve the circular join(Multiple Path) error.
Appreciated if someone can give some pointer or suggestion as the customer is in stiff deadline.
Thanks
Teik

The strange thing compared to your output is that I get an error when I have table prefix in the query block:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE TMP1.A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
ORA-31693: Table data object "SYSADM"."TMP3" failed to load/unload and is being skipped due to error:
ORA-38500: Unsupported operation: Oracle XML DB not present
Job "SYSTEM"."SYS_IMPORT_FULL_01" completed with 1 error(s) at Fri Dec 13 10:39:11 2013 elapsed 0 00:00:03
And if I remove it, it works:
Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.4.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Master table "SYSTEM"."SYS_IMPORT_FULL_01" successfully loaded/unloaded
Starting "SYSTEM"."SYS_IMPORT_FULL_01": system/******** DUMPFILE=TMP1.dmp LOGFILE=imp.log PARALLEL=8 QUERY=SYSADM.TMP1:"WHERE A = 2" REMAP_TABLE=SYSADM.TMP1:TMP3 CONTENT=DATA_ONLY
Processing object type TABLE_EXPORT/TABLE/TABLE_DATA
. . imported "SYSADM"."TMP3" 5.406 KB 1 out of 2 rows
Job "SYSTEM"."SYS_IMPORT_FULL_01" successfully completed at Fri Dec 13 10:36:50 2013 elapsed 0 00:00:01
Nicolas.
PS: as you can see, I'm on 11.2.0.4, I do not have 11.2.0.1 that you seem to use.

Best way to achieve multiple paths with quizzes using Captivate 6?

I’m looking for the best way to achieve multiple paths and quizzes using Captivate 6.
Here is the scenario: The learner watches general slides 1 – 3 and then chooses between Path A, Path B, or both paths combined. If they choose Path A then they watch the A portion only and take the A Quiz only. Same happens for Path B and for the two paths combined. The learner would only have to go one path to complete the course.
What I’m finding is Captivate only has one Quiz results page (even if you create two separate quizzes, it merges them). I was trying to avoid having three separate projects for the same module to keep it simple. I see if I have three separate projects I could use the Multi-SCO Packager to merge them for use on my Moodle LMS. But wait, I don't have the elearning suite, so I don't have access to the Multi-SCO Packager...
My question is: What is the best approach way to accomplish this goal? Any recommendations?
Message was edited by: austingina

Captivate 6 has Branch Aware quizzing. Turn on that option in Quiz Settings and then your Quiz Results page should only show results for the branch your user visits.

How to avoid multiple DataConnections with LCD ES2

Hi, we are just starting using the data connections to connect via a database with LiveCycle Designer. It seems we are missing something important regarding to manipulation of data from the PDF.
At first we have tried to apply a INSERT command to our first table and be able to browse through the items in the database. We are able to browse through the database only before we have inserted something.
If we insert an item and then try to browse through the database with (Next, Previous, Last or First) it will crash and have an error of the following :
(Next, Previous, Last or First) failed. Multiple-step operation generated errors. check each status value [ID:@11]
So then we have decided to create a second data connection which would have each of the column in the database except for the ID which appears to make everything crash.
E.G.: Table_1
DataConnection1 --> ID, Field1, Field2, Field3, Field4 SELECT Command connection
DataConnection2 --> Field1, Field2, Field3, Field4 INSERT Command connection
Seems like we can't have a SELECT and INSERT in the same DataConnection because with those 2 different connections it works fine....
Then we are trying to show multiple data's in a table which is linked with the ID of the Selected ID in DataConnection1.. To show the data is all fine using a 3rd connection for that Table_2, then we are making sure a blank row is always there at the end of the table to be able to add this new entry to the database with a Add button to INSERT into the Table_2... Unfortunately we do not have a 2nd connection to that table because we cannot link those fields with the database for the purpose of a multiple entry view.
We have tried to make a 2nd connection for the purpose of the INSERT but it doesnt work at all.
We are basing ourselves on the sample provided by Stefan Cameron in his blog http://forms.stefcameron.com/2006/12/18/databases-inserting-updating-and-deleting-records/
I am wondering if we are using the right functionalities and if it is the simplest way to work with databases...
If anyone can help, it would be greatly appreciated!!
Thanks in advance!
Mag

Don't forget to activate the RESOURCE_LIMIT parameter, which default is FALSE :
alter system set RESOURCE_LIMIT = true;
Laurent, I had a similar problem some time ago : I didn't want to avoid multiple access, but only control who was doing what. That's because moving from Client/Server to Web the TERMINAL column in V$SESSION becomes useless.
I tried your solution, but I had to give up with it, because in my Forms9i application some forms call Reports, which generate a new session.
I decided to use DBMS_APPLICATION_INFO, and this is satisfactory for my requirements, but I'm interested to discover other solutions.
P.S. with my solution I'm able to limit accesses, because in the CLIENT_INFO string I put, among other things, the
application user, so I can control if an user is already connected. The problem is that existing applications have to be modified .....:-(

Photoshop file exports multiple paths to illustrator

I'm brand new to illustrator but have noticed than when i place a Photoshop tiff file, it sometimes imports multiple paths with the image -- some of which
do not show up in photoshop. For instance, I have a file with two objects with paths, I crop to one image in photoshop, then save. When I import that single image cropped file to illustrator, FOUR paths show up instead of one -- i.e. I have the two paths of the original photoshop image plus duplicates of the same, all in the same file. I've noticed this happens on all my files that originally had multiple images even though they had been cropped to just a single image.
Anyone know how to fix this, or better yet, what the heck is going on?

We did not get your screenshot, use the camera icon left of the smiley face.
Did you try Milleniums suggestions, you may have cropped this adn have a clipping path that is off the canvas taht you are not seeing.
To flush this out, I would select the good path you have in photoshop, cut this, delete all paths in your phothsop document, then paste the path in your clipboard, name it, set it to your clipping path.
I personally never use clipping paths for final, as they make my knockouts look unnatural, and too hard edged. I mask my layers(in a grouped set), cause then I am getting my background knockout out at 300 dpi (bitmapped CT resolution), rather than a razor sharp 3386 dpi(LW resolution). You may be working on a web project so this may not affect you as much, but just wanted to note this finer point as many people nowadays never worked on a Scitex/Crossfield/Hell so don't realize this is what is happening.

How to avoide multiple duplicate entries in adress book?

How to avoide multiple duplicate entries in adress book? I can add the same contact name and number more than twice and the phone isn't warning me at all!!! I's quite a heck for me.

not possible from inside AB AFAIK. but you can do the following. in finder open the folder /users/username/library/application support/address book/metdata. switch to the list mode and sort by date modified. quicklook the vcards at the top to see which ones they are.

How to avoid multiple call to function:

In our datawarehouse we have a huge receipt row table where all metrics ar stored in the local currency. On top over that we have views which calculate metrics to the desired currency.
So basically all views looks like this
select geo_region,
product_group,
customer_group,
metric1 * (select get_exchange_rate(currency_id) from dual) metric1,
metric1 * (select get_exchange_rate(currency_id) from dual) metric2,
metric1 * (select get_exchange_rate(currency_id) from dual) metricx,
group by..
As we have about 20 metrics we notices that the function is called 20 times per row.
Is there really anyway to avoid that? Shouldn't it be it's just the exact same call with the same in-parameters over and over again.
We've tried with local sys_context and the performance is better but the call to the context is still performed 20 times. Any Ideas?

Can you avoid multiple function calls? Maybe, if as in your example all the function calls values are computing the same result. If they operate on different columns then you'll have to perform the function call anyway.
Either way you should be able to eliminate the (near as I can tell) pointless subquery from dual
You might be able to avoid the repeated function calls if the values are always the same. If every computation you could save the function call (and subquery!) by doing it once and then using assignments after the initial query using variables after the initial query, perhaps using NULL in the query as placeholders to select into a record - something like
select inital_region,
         product_group,
         customer_group,
         metric1 * exchange_rate(currency_id) metric1,
         null metric2,
v_metric2 := metric1;
...Message was edited by (fixed typo):
riedelme

THIS SUCKS!!! Re:Multiple paths in FILE_DATASTORE path attribute

After 6 hours of struggle I managed to solve my problem. Everything was due to a stupid mistake (or incomplete documentation of intermediaText) on Oracle's part:
1. Pasted from Oracle8i interMedia Text Reference - Datastore Objects:
You can specify multiple paths for path, with each path separated by a colon (:). File names are stored in the text column in the text table. If path is not used to specify a path for external files, Oracle requires the path to be included in the file names stored in the text column.
2. Pasted from Oracle intermedia Text Manager online help:
Multiple paths can be specified for
path, with each path separated by a colon (:).
This is wrong at least on Windows based OS's. Fortunately, when everything else failed I tried with a SEMI-COLON (;) and worked. Go figure...

Please ask questions (or post statements) about Oracle Text (formerly interMedia text) in the Oracle text forum. Oracle text experts monitor the Oracle Text forum, you will get a quicker, more expert answer there.

Export multiple paths to illustrator

Photoshop CS5
Is there really no way to export multiple paths, on multiple vector layers, to Illustrator in one go?

What did you do to get that option to be available? I don't see it. All I see, in the "Export paths to file" dialogue is the path I currently have selected. But I have many vector layers I want in Illustrator (which I've already one by one copy/pasted into Illustrator, but I still want to know).

Servlet classpath: multiple path

Is it possible to have multiple path in a servlet classpath (not in the java
          class path) ?
          How do you do it. ?
          Jean.


Yes, it is possible.
          1) on NT, use ";" as classpath seperator.
          2) on UNIX, use ":" as classpath seperator.
          Cheers - Wei
          Jean Kunz <[email protected]> wrote in message
          news:8b531n$q4m$[email protected]..
          > Is it possible to have multiple path in a servlet classpath (not in the
          java
          > class path) ?
          >
          >
          > How do you do it. ?
          >
          > Jean.
          >
          >

Pen Tool Multiple Path Selection

Just upgraded to CC 2014. I frequently remove photo backgrounds by creating paths with the pen tool. I have always been able to create multiple paths for areas that I want to delete using the pen tool, then upon completion, right click, choose "Make Selection" and then delete all the areas at once. Since upgrading, only the last path region is selected using this method and the other areas disappear. Any help would be greatly appreciated, have been going crazy trying to figure this out.

That particular aspect should work the same as previous versions. When you make the first path, click outside that path in the Paths panel, and then click back on it. You only need to do this if you have left the previous path open (not closed it by joining the two ends.
Continue using the pen tool and the new path segments will be there in the same path.
You need to be aware of the Pen tool options, like Combine, Subtract, Intersect.
If you use that path for making a selection for instance, and then use the Pen tool again, you will lose the first path. A quick and easy way to save paths is to drag them to the New Path icon at the bottom of the Paths panel.
This graphic might be of help.

How to avoid multiple selection in ALV tree control?

Hi,
Experts,
I want to avoid multiple selections on Alv tree control after pressing control keyboard button(Ctrl). Even by pressing Ctrl keyword button i want to select only one row of a Alv tree control.i have used cl_salv_tree class for it is there any method to achieve this please pass some code/idea on it.
Thanks in advance,
Shabeer ahmed.

I haven't tried it before but it should help.
[https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cda3992d-0e01-0010-90b2-c4e1f899ac01|https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/cda3992d-0e01-0010-90b2-c4e1f899ac01]

Rewriting SQL to avoid multiple scan of a table

Hi,
Is it possible to rewrite the following statement in order to avoid multiple scan of the tables:
SELECT
(ACT.ID_ACCES_CLIENT_TYPE * 100000) + 30024 ss_key,
TO_CHAR(( SYSDATE ),'MM/DD/YYYY') date_key,
30024 transtype_key,
ACT.ID_ACCES_CLIENT_TYPE client_acces_d_sskey,
T.ID_MODELE fonct_mobile_d_sskey,
'0' type_mobile_key,
1 MEMBER
FROM ACCES_CLIENT_TYPE ACT, ACCES AC, TYPE_MODELE T
where ACT.FLAG_ACTIF is not null
and NVL(( ACT.DAT_FIN ),( SYSDATE ))> SYSDATE - ((3 + 0)*30)
and AC.ID_ACCES = ACT.ID_ACCES
and AC.FLAG_ACTIF is not null
and T.TAC = AC.TAC_1
AND mod(ACT.ID_ACCES_CLIENT_TYPE, 2) = 1
union all
SELECT
(ACT.ID_ACCES_CLIENT_TYPE * 100000) + 30025 ss_key,
TO_CHAR(( SYSDATE ),'MM/DD/YYYY') date_key,
30025 transtype_key,
ACT.ID_ACCES_CLIENT_TYPE client_acces_d_sskey,
T.ID_MODELE fonct_mobile_d_sskey,
'1' type_mobile_key,
1 MEMBER
FROM ACCES_CLIENT_TYPE ACT, ACCES AC, TYPE_MODELE T
where ACT.FLAG_ACTIF is not null
and NVL(( ACT.DAT_FIN ),( SYSDATE ))> SYSDATE - ((3 + 0)*30)
and AC.ID_ACCES = ACT.ID_ACCES
and AC.FLAG_ACTIF is not null
and T.TAC = AC.TAC_U
AND mod(ACT.ID_ACCES_CLIENT_TYPE, 2) = 1
union all
SELECT
(ACT.ID_ACCES_CLIENT_TYPE * 100000) + 30026 ss_key,
TO_CHAR(( SYSDATE ),'MM/DD/YYYY') date_key,
30026 transtype_key,
ACT.ID_ACCES_CLIENT_TYPE client_acces_d_sskey,
T.ID_MODELE fonct_mobile_d_sskey,
'2' type_mobile_key,
1 MEMBER
FROM ACCES_CLIENT_TYPE ACT, ACCES AC, TYPE_MODELE T
where ACT.FLAG_ACTIF is not null
and NVL(( ACT.DAT_FIN ),( SYSDATE ))> SYSDATE - ((3 + 0)*30)
and AC.ID_ACCES = ACT.ID_ACCES
and AC.FLAG_ACTIF is not null
and T.TAC = AC.TACG_G
AND mod(ACT.ID_ACCES_CLIENT_TYPE, 2) = 1
Thanks for help

| Id | Operation | Name | Rows | Bytes | Cost (%CPU)|
| 0 | SELECT STATEMENT | | 44028 | 2340K| 287K (67)|
| 1 | UNION-ALL | | | | |
|* 2 | HASH JOIN | | 15217 | 832K| 95835 (0)|
| 3 | INDEX FAST FULL SCAN | TYPE_MODELE_IDX_003 | 23462 | 320K| 10 (0)|
| 4 | NESTED LOOPS | | 15217 | 624K| 95817 (0)|
|* 5 | TABLE ACCESS FULL | ACCES_CLIENT_TYPE | 13078 | 319K| 91239 (0)|
|* 6 | TABLE ACCESS BY INDEX ROWID| ACCES | 1 | 17 | 2 (50)|
|* 7 | INDEX UNIQUE SCAN | PK_ACCES | 1 | | |
|* 8 | HASH JOIN | | 15079 | 824K| 95835 (0)|
| 9 | INDEX FAST FULL SCAN | TYPE_MODELE_IDX_003 | 23462 | 320K| 10 (0)|
| 10 | NESTED LOOPS | | 15079 | 618K| 95817 (0)|
|* 11 | TABLE ACCESS FULL | ACCES_CLIENT_TYPE | 13078 | 319K| 91239 (0)|
|* 12 | TABLE ACCESS BY INDEX ROWID| ACCES | 1 | 17 | 2 (50)|
|* 13 | INDEX UNIQUE SCAN | PK_ACCES | 1 | | |
|* 14 | HASH JOIN | | 13732 | 683K| 95834 (0)|
| 15 | INDEX FAST FULL SCAN | TYPE_MODELE_IDX_003 | 23462 | 320K| 10 (0)|
| 16 | NESTED LOOPS | | 13732 | 496K| 95817 (0)|
|* 17 | TABLE ACCESS FULL | ACCES_CLIENT_TYPE | 13078 | 319K| 91239 (0)|
|* 18 | TABLE ACCESS BY INDEX ROWID| ACCES | 1 | 12 | 2 (50)|
|* 19 | INDEX UNIQUE SCAN | PK_ACCES | 1 | | |
Predicate Information (identified by operation id):
2 - access("T"."TAC"="AC"."TAC_1")
5 - filter("ACT"."FLAG_ACTIF" IS NOT NULL AND
NVL("ACT"."DAT_FIN",SYSDATE@!)>SYSDATE@!-90 AND MOD("ACT"."ID_ACCES_CLIENT_TYPE",2)=1)
6 - filter("AC"."FLAG_ACTIF" IS NOT NULL AND "AC"."TAC_1" IS NOT NULL)
7 - access("AC"."ID_ACCES"="ACT"."ID_ACCES")
8 - access("T"."TAC"="AC"."TAC_U")
11 - filter("ACT"."FLAG_ACTIF" IS NOT NULL AND
NVL("ACT"."DAT_FIN",SYSDATE@!)>SYSDATE@!-90 AND MOD("ACT"."ID_ACCES_CLIENT_TYPE",2)=1)
12 - filter("AC"."FLAG_ACTIF" IS NOT NULL AND "AC"."TAC_U" IS NOT NULL)
13 - access("AC"."ID_ACCES"="ACT"."ID_ACCES")
14 - access("T"."TAC"="AC"."TACG_G")
17 - filter("ACT"."FLAG_ACTIF" IS NOT NULL AND
NVL("ACT"."DAT_FIN",SYSDATE@!)>SYSDATE@!-90 AND MOD("ACT"."ID_ACCES_CLIENT_TYPE",2)=1)
18 - filter("AC"."FLAG_ACTIF" IS NOT NULL AND "AC"."TACG_G" IS NOT NULL)
19 - access("AC"."ID_ACCES"="ACT"."ID_ACCES")
44 rows selected.

How to verify multiple paths available to a route in OSPF

Hello,
How do I verify multiple paths available to a route in OSPF
I have three paths available to a route. I can see two equal cost paths shown in the routing table. The third higher metric path doesn't show up in the routing table
When I disable the two equal cost paths, the third path is visible in the routing table
Is there a command in ospf or shortest path algorithm, which can show the total number of paths available to a route and why one route is chosen over other
Thanks,
Chandru

Thanks for the reply Reza. Is there a way to find all paths available in the ospf database.
I just wanted to know the total number of paths available to an route in ospf area

Avoid multiple paths rpd

Similar Messages

Maybe you are looking for