Avoiding attributes when using transform class

Hi,
One more help pls!!!!!
When I use transform class and create an XML file, it creates with attributes for the nodes.
For exapmle,
<MessageOwner type="type" name="name">
How do I avoid this type and name attributes?????
Thanx and Regards,
Gayathri.

create a XSL that will not output the attibutes.

Similar Messages

ISE Not Identifying AD Group Attributes when using Multiple ISE Servers

So we have multiple ISE Servers with differing personas. I was having an issue with our new ISE setup not identifying AD Group Attributes when using them in Authorization rules.
We have 2- 3395 appliances running Admin and Monitoring/Troubleshooting Personas and 2- 3395 appliances running as Policy server personas. We are running v1.1.1.268 with the latest two patches.
I was unable to pull Active Directory Group Attributes in any of my Authorization rules. After Resyncing all the boxes with the Primary Administration box I was able to do this. There is no bug listings for this occurance nor do we have Smartnet to call support for other reasons. I thought this might be useful to someone who is having the same issue and is unable to figure it out with TAC
-CC

Absolutely. All units said in-sync after setting their personas.
Here is our layout:
ISE-ADM-01 Admin-Primary, Monitoring-Secondary
ISE-ADM-02 Admin-Secondary, Monitoring-Primary
ISE-PDP-01 Policy Only
ISE-PDP-02 Policy Only
I synced one at a time starting with ADM-02. After completing the other two boxes. Active Directory Attribs were pulled down when using them in the Ext Group within my Authz rules.
-CC

How can i set "Createdby" attribute When using Custom JheadStart Security

Hello
We do not use JASS for Authentication , please help us how can i set createtby attributes with jhs.username in application for any entity object?
thanks

See a similar question at History Attributes when using Custom Authentication Type

What is the best way to avoid latency when using the io plug in?

What is the best way to avoid latency when using the io plug in?

Hi colin a.
Welcome to the Support Communities!
The article below may be able to help you with this. Click on the link to see more details and screenshots.
Logic: About I/O buffer size and monitoring latency
http://support.apple.com/kb/ht1314
Cheers,
- Judy

Compile error when using a class by fully-qualified name

Hi... Is it an AS3 "feature" or a FB compiler bug that I cannot use a class without importing it?
I have a statement such as
if (de.codebank.util.StringUtilities.startsWith(status.name, phase.name+"_"))
which does not compile until I import the StringUtilities class, which is pointless, of course.
The compile error mentions an unknown property "util"

I believe this is how AS3 works. Fully qualified class types require import statement.
You use fully qualified name whenever you want to avoid ambiguity.
However, when the code is like,
import mx.collections.XMLListCollection;
var arr:mx.collections.ArrayCollection;
It works since compiler now understands that "mx.collections" is a package.

Error Message When Using a Class Files to Control Navigation

This is my first attempt at using a class file in a flash project. My intent is to keep all of my navigation elements in class file called "Navigation". However, I keep getting an error message when I publish.
I am using a button to go back to the main screen and I gave that button the instance name of "bnt_home". I have also linked that button in the library to the class "Navigation".
Here is the code:
package
    import flash.display.SimpleButton;
    public class Navigation extends SimpleButton
        public function Navigation()
            bnt_home.addEventListener(MouseEvent.MOUSE_DOWN, goNavigation);
        private function goNavigation(event:MouseEvent):void
            gotoAndPlay(1,"Main");

When I changed the code I got error (1046: Type was not found or was not a compile-time constant: MouseEvent).
package
    import flash.display.SimpleButton;
    public class Navigation extends SimpleButton
        public function Navigation()
            this.addEventListener(MouseEvent.MOUSE_DOWN, goNavigation);
        private function goNavigation(event:MouseEvent):void
            root.gotoAndPlay(1,"Main");

Problem when used InetAddress class in Applet

Hi all.
I'DongPG from Vietnam.
I have a question'How to get IP that different from IP default "127.0.0.1" address'.
I've built an applet where i used InetAddress class to get browser'IP follow:
InetAddress localIP = InetAddress.getLocalHost();
String strIP=localIP.getHostAddress();
I used JBuilder to build applet. It's gotten IP right. Ex:strIP='192.168.100.1'
But when i used browser link to my Applet in WebServer, it only return strIP='127.0.0.1'
Thank a lot!

Wrong forum and cross posted as well.

Label of attribute when used as View Criteria item with Bind Variable

I've a VO attribute used in a named search with this requirement:
The attribute provides has an optional View Criteria item that has a bind variable operand. The bind variable is in the WHERE clause. The attribute has an LOV. The choice list for the specified View Criteria item should display the label "Effective Release". However, in all other contexts, including the search results table and the dropdowns the user can optionally add in an advanced search, the label displayed for the attribute must say "Release".
In other words, the default label for the attribute should be "Release" in all but one context - which is that when the dropdown list for the viewCriteria item using the bind variable is displayed, the label should say "Effective Release".
Note that if the user moves to Advanced Search and selects adds the attribute as a search criteria, this latter usage should be labeled as "Release". (in this case, in other words, the dropdown that displays by default and has the bind variable operand is labelled "Effective Release", the one the user added in advance search is labelled "Release")
here is the View Criteria item source xml:
      <ViewCriteriaItem
        Name="ReleaseId1"
        ViewAttribute="ReleaseId1"
        Operator="="
        Conjunction="AND"
        Value=":v_ReleaseId"
        GenerateIsNullClauseForBindVars="false"
        ValidateBindVars="true"
        IsBindVarValue="true"
        Required="Required"/>I've experimented by putting "Effective Release" as the label for the bind variable as below. However, ADF does not use that value to display, it defers to the attribute value:
<Variable
    Name="v_ReleaseId"
    Kind="viewcriteria"
    Type="oracle.jbo.domain.Number">
    <Properties>
      <SchemaBasedProperties>
        <LABEL
          ResId="EFFECTIVE_RELEASE_LOV"/>
      </SchemaBasedProperties>
    </Properties>
</Variable>The reason for the requirement, if it matters, is that the View Criteria item with the bind variable ("Effective Release" queries a range of values using the analytic function rank(); the bind variable is in the WHERE clause. Otherwise, the dropdown that can be added in advanced search ("Release") looks for exact matches on the attribute value. So since the search functionality is different, the label should be different.
Am using 11g.
Thanks for your help.

Hi
I have found that when using validation type Key Exists and the VO is in the local application, then the bind variable is available in the Create Validation wizard. When I try and create a validator on a VO that is core to all my applications, then I put that VO into an ADF library, the bind variable parameter is not available for mapping to my entity object attribute, even though I can select the VO to create a view accessor from the ADF library.
Possible bug?

Passing argument to, when using one class for multiple assets

I had a class that I was passing a simple argument to like so:
var quiz_1_2:CaseStudyQuiz = new CaseStudyQuiz(2);
addChild(quiz_1_2);
I now would like to use this class for multiple MCs in my library. I thought I could let Flash create a class for each of them and specifying the CaseStudyQuiz class as the Base class. When I do that, I get the following error:
1136: Incorrect number of arguments. Expected 0.
Obviously this is because the class created by flash does not except an argument. Does that mean, I would have to create a seperate class for each of the movies that use that class? And if so, what would I have to do in that class for it to except the parameter and pass it on to my base class?
Thank you very much for any help with this!!!

use the super() function and pass your parameter. but you still might get a runtime error but i don't think that will cause a problem.

Dbms_crypto - avoid error when using different key in lower environment

Hello Experts,
We are using Oracle 11.2.0.2. We are planning to implement dbms_crypto to encrypt few columns. We clone the data from production to lower environment ( DEV, QC).
For the lower environments, we do not want to get the sensitive data from production and do not plan to use same key. Rather than getting an error when using differnt key, is it possible to get a different resultset back.
In other words, we want the implementation to be same across environments but want to use a diffent key in lower environment and get different result (or garbage).
Any suggestions would be greatly appreciated.
While testing this logic, I am getting following error when using differnt key to decrypt. It works fine if I use same key.
Error at line 1
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at line 19
DECLARE
l_credit_card_no    VARCHAR2(19) := '1234 5678 9012 3456';
l_ccn_raw           RAW(128) := UTL_RAW.cast_to_raw(l_credit_card_no);
l_key               RAW(128) := UTL_RAW.cast_to_raw('abcdefgh');
   l2_key               RAW(128) := UTL_RAW.cast_to_raw('12345678');
l_encrypted_raw     RAW(2048);
l_decrypted_raw     RAW(2048);
BEGIN
DBMS_OUTPUT.put_line('Original : ' || l_credit_card_no);
l_encrypted_raw := DBMS_CRYPTO.encrypt(src => l_ccn_raw,
                                         typ => DBMS_CRYPTO.des_cbc_pkcs5,
                                         key => l_key);
DBMS_OUTPUT.put_line('Encrypted : ' || RAWTOHEX(UTL_RAW.cast_to_raw(l_encrypted_raw)));
l_decrypted_raw := DBMS_CRYPTO.decrypt(src => l_encrypted_raw,
                                         typ => DBMS_CRYPTO.des_cbc_pkcs5,
                                         key => l2_key); --**Using different key to decrypt
DBMS_OUTPUT.put_line('Decrypted : ' || UTL_RAW.cast_to_varchar2(l_decrypted_raw));
END;Thank you.

If I understand what you are trying to do ... and I may not ... it is not going to work.
SQL> DECLARE
2   l_credit_card_no VARCHAR2(19) := '1612-1791-1809-2605';
3   l_ccn_raw RAW(128) := utl_raw.cast_to_raw(l_credit_card_no);
4   l_key1     RAW(128) := utl_raw.cast_to_raw('abcdefgh');
5   l_key2     RAW(128) := utl_raw.cast_to_raw('zyxwvuts'); -- alternate key used to attempt a different decryption
6
7   l_encrypted_raw RAW(2048);
8   l_decrypted_raw RAW(2048);
9 BEGIN
10    dbms_output.put_line('Original : ' || l_credit_card_no);
11
12    l_encrypted_raw := dbms_crypto.encrypt(l_ccn_raw, dbms_crypto.des_cbc_pkcs5, l_key1);
13
14    dbms_output.put_line('Encrypted : ' || RAWTOHEX(utl_raw.cast_to_raw(l_encrypted_raw)));
15
16    l_decrypted_raw := dbms_crypto.decrypt(src => l_encrypted_raw, typ => dbms_crypto.des_cbc_pkc
s5, key => l_key1);
17
18    dbms_output.put_line('Key1 : ' || utl_raw.cast_to_varchar2(l_decrypted_raw));
19
20    l_decrypted_raw := dbms_crypto.decrypt(src => l_encrypted_raw, typ => dbms_crypto.des_cbc_pkc
s5, key => l_key2);
21
22    dbms_output.put_line('Key2 : ' || utl_raw.cast_to_varchar2(l_decrypted_raw));
23 END;
24 /
Original : 1612-1791-1809-2605
Encrypted : 3534443342333642353141363846384237463732384636373943374630364234323243334539383042323135
Key1 : 1612-1791-1809-2605
DECLARE
ERROR at line 1:
ORA-28817: PL/SQL function returned an error.
ORA-06512: at "SYS.DBMS_CRYPTO_FFI", line 67
ORA-06512: at "SYS.DBMS_CRYPTO", line 44
ORA-06512: at line 20

Java.lang.InstantiationException when using Action class with constructor

Hi everyone,
I'm using the insertNewNode() method from this class in another action class, which works fine. But when this action itself is called, I get an infinite java.lang.InstantiationException (until the stack is overflowed). I'm initiating the fields required in every method in a constructor. If there is no constructor, this action works fine again. What's wrong?
public class GliederungNewAction implements Action {
     private final String DEFAULT_DESCRIPTION = "Neuer Punkt";
     private OracleConnection connection;
     private String username;
     private String catalogue;
     private String attribute;
     private String parent_attr;
     private int parent_sequenceNr;
     private int requiredSequenceNumber;
     public GliederungNewAction(OracleConnection connection, String username, String catalogue) {
          this.connection = connection;
          this.username = username;
          this.catalogue = catalogue;
     public String perform(ActionMapping mapping, HttpServletRequest request,
               HttpServletResponse response) {
          HttpSession session = request.getSession();
          // fetch the necessary parameters from the JSP site
          // the parent attribute is the selected attribute!
          parent_attr = request.getParameter("attr");
          catalogue = request.getParameter("catalogue");
          parent_sequenceNr = Integer.parseInt(request.getParameter("sort_sequence"));
          username = session.getAttribute("username").toString().toUpperCase();
          // connect to database
          db.SessionConnection sessConn = (db.SessionConnection) session.getAttribute("connection");
          if (sessConn != null) {
               try {
                    sessConn.setAutoCommit(false);
                    connection = (OracleConnection)sessConn.getConnection();
                    // insert the new node into DB
                    insertNewNode(DEFAULT_DESCRIPTION, parent_attr, parent_sequenceNr);
                    connection.commit();
                    // set attributes for JSP post-action operations
                    request.setAttribute("attr", attribute);
                    request.setAttribute("parent_attr", parent_attr);
               } catch(SQLException ex) {
                    if ( ex.getErrorCode() == 20001 ) {
                         return "error_edit.do";
                    } else { // for all other error codes, rollback and return general error page
                         try {
                              connection.rollback();
                              ex.printStackTrace();
                              return "error_general.do";
                         } catch (SQLException e) {
                              System.err.println("Rollback failed!");
                              e.printStackTrace();
                              return "error_general.do";
                         } // end of catch
                    } // end of else
               } // end of catch
          return mapping.getForward();
        // sample method
      * Creates, fills and executes a prepared statement to insert a new entry into the specified table, representing
      * a new node in the catalogue.
      * @param parent_attr TODO
      * @param parent_sequenceNr TODO
      * @throws SQLException
     public void insertNewNode(String description, String parent_attr, int parent_sequenceNr) throws SQLException {
               requiredSequenceNumber = getRequiredSequenceNumber(parent_attr, parent_sequenceNr);
               int freeSequenceNumber = getFreeSequenceNumber(requiredSequenceNumber);
               int lastPosition = getLastNodePosition( getLastChildAttribute(parent_attr) );
               attribute = createNewNodeAttribute(parent_attr, lastPosition);
               String callAddNode = "{ call package.addNode(:1, :2, :3, :4, :5, :6, :7) }";
               CallableStatement cst;
               cst = connection.prepareCall(callAddNode);
               cst.setString(1, username );
               cst.setString(2, catalogue);
               cst.setString(3, attribute);
               cst.setString(4, parent_attr);
               cst.setString(5, description);
               cst.setInt(6, requiredSequenceNumber);
               cst.setInt(7, freeSequenceNumber);
               cst.execute();
               cst.close();
java.lang.InstantiationException: action.GliederungNewAction
     at java.lang.Class.newInstance0(Unknown Source)
     at java.lang.Class.newInstance(Unknown Source)
     at action.ActionMapping.perform(ActionMapping.java:54)
     at ControllerServlet.doResponse(ControllerServlet.java:92)
     at ControllerServlet.doPost(ControllerServlet.java:50)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:679)
     at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:431)
     at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:355)
     at ControllerServlet.doResponse(ControllerServlet.java:103)
     at ControllerServlet.doPost(ControllerServlet.java:50)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     .......

You're welcome.
Still, I would report this as a bug at the Struts mailinglist/issuetracker. This silly behaviour shouldn't happen. Once an InstantiationException, okay, but in an infinite loop?!? That's definately a bug. Also the detail message may be more informative, e.g. "No default constructor found" or so.

Compatibility when using nested classes an templates

We hit this problem when upgrading to from Workshop 4.2 to Sun WorkShop 6 update 2 C++ 5.3. This code compiles with 4.2 and MSVC6, but does not compile with 5.3. The compiler seems to get confused between the nested class typedef and template parameters. Renaming either T avoids the problem. Similar code caused a clash between omniORB 3.0.2 with ObjectSpace 2.1.
Are there any compatibility compiler options that we are missing here? Otherwise we are forced to modify our ORB.
// Compile with: CC -g -xs -xtarget=ultra -mt -PIC -compat -c CompilerBug.cpp
class A { // A could also have been a namespace
public:
class B {
class C {
typedef B T; // will compile when typedef is renamed
template< class T >
inline void Foo( T * p) {
p->~T(); // Error: The destructor name must match the class name
void CompilerBug() {
A::C * p = new A::C();
Foo< A::C >(p);

Use a server-side include for the menu on each page, give
each button a
unique ID, and use a page-specific stylesheet (either linked
or embedded) to
change the style values for the selected button.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"dooner1" <[email protected]> wrote in
message
news:evg1bo$66e$[email protected]..
> Hello all - Hopefully everyone had a good Easter !
>
> is it possible to create a template of the tab structure
i want, and then
> insert this new template and modify the colours for each
different tab
> link /
> page link? ie, all the tabs will have the same links but
will have
> different
> colours on different pages.
> you're welcome to jump on my website at
>
http://www.bondimigration.com.au/overview_10.html
to get an idea of what
> I'm
> talking about..
>
>

How to get the log information when using a class?

Hi All,
I have a simple question, which I don't know how to solve. I am using org.apache.commons.logging.Log and LogFactory to do some logging. A typical situation is exemplified in the following code snippet.
import org.apache.commons.logging.Log;
import org.apache.commons.logging.LogFactory;
class LogClass {
    private static final Log LOG = LogFactory.getLog(AClass.class);
    public void logit(){
        LOG.debug("This is the debugging log.");
public class AClass{
    public static void main(String[] args) {
        LogClass l=new LogClass();
        l.logit();
}But this way, I do not get the log information from the class LogClass. Could anybody please help?
Many thanks.

jschell wrote:
jverd wrote:
...configuration in log4j.xml or log4j.properties.And far as I recall you need one of those two also. If there is no config then there is no output.I thought it used some default config if no file is present, but I could be mistaken. Either way, it adds to the possible problems that the OP could be having, any of which are consistent with his rather vague question.
1) He's passing the wrong class to the LogFactory, and hence getting a logger with the wrong name, so he's seeing a different name than he expects in the output that's being produced.
2) His config file does not contain the proper format to include the actual classname, independent of the logger's name, so he's missing a piece of desired information in each line of the output that's being produced.
3) His config file indicates a threshold that's less verbose than the level at which his code is logging, so no output is present when he wants it.
4) His config file is missing (or not where it's expected to be), so no output is being produced at all.
5) His config file is missing (or not where it's expected to be), so a default level or format is being produced, effectively the equivalent of one of the misconfigurations described in #2 and #3.
Since the OP seems to have vanished, we may never know.

FMS auto disconnects when using a class

I am trying to implement a very simple class that will create
an instance of the NetConnection object and connect to the FMS
server. However, the client will connect then immediately
disconnect when the swf is published. My code is as follows...
FLA Code:
import _includes.*;
var obj_conn:Conn = new Conn();
obj_conn.connect();
Conn.as Code:
class _includes.Conn
public function Conn()
public function connect()
var nc:NetConnection = new NetConnection();
nc.connect("rtmp://localhost/classtest");
Please note that the connection works fine if I just create a
NetConnection variable on the FLA itself in the timeline. Any
suggestions/help would be appriciated!

it think this is happen because you use local variable : your
variable is delete at the end of connect() so your NetConnection
will be closed in the same time.
try this:
Conn.as Code:
class _includes.Conn
private var objNetCon:NetConnection;
public function Conn()
public function connect()
this.objNetCon = new NetConnection();
this.objNetCon.connect("rtmp://localhost/classtest");
}

Why is the rotate point moving when using Transform Again on a triangle?

I am trying to create a pattern that I have created in previous itterations of Illustrator. In CC when I create a triangle (either via Star, Poly, or Pen tool) and then try to rotate it via Transform Each > Transform again, the rotation point moves according to what the bounding box would be if I reset it, rather than staying in one (original) spot relative to the actual bounding box and triangle. I cannot find any settings that would be affecting the rotate point in this way. I am pretty confident that I am using the same procedure now that I did in older versions of Illustrator. Perhaps I am using the wrong procedure.
Naturally, if you are rotating something around its center you should expect that it would end up create a circular pattern. It is more of a square with concave sides. The red is a perfect circle that I grouped to the triangle to demonstrate the rotate points movement. It is located in the exact center according to the align tools.

With the rotate tool, option click to set you point of rotation.
You also may want to look into the transform effect, theres is a box with 9 points for your anchor points you can try. You can also add an object filled with none, group this with your object, and transform the group, to get offset results with the transform effect.

Avoiding attributes when using transform class

Similar Messages

Maybe you are looking for