Awt textarea which supports multiple colors!!!

hi all,
I am developing a Chat server and i need a textarea which supports multiple colors and im not interested in going for swing components.
So does ne1 have any code on this or ne idea of doing it.
thanX a lot in adv,
kiran

I have used a library called KFC, Kazuki YASUMATSU's Foundation Classes. The bad news: The homepage seems to be gone. The good news: I made a zip of what I have laying around and put it at http://www.uib.no/People/stud2376/div/kfc1.1.3.zip. The download is about 2.2 MB including source and javadoc, the jarfile with all classes are about 600K.
I found the library not very intuitive to use, but once you get the hang of it it's not too bad. For your need you probably only need to concern yourself with the TextArea, Text, and TextStyle classes. (I have switched to swing jand java2 myself and don't remember too much of how I used KFC, so I can't help you more than that.)

Similar Messages

[SOLVED]Looking for a tiling manager which supports multiple monitors

I use musca and I absolutely have no problems with it other than this :
http://bbs.archlinux.org/viewtopic.php? … 04#p774104
I also tried emailing the musca distribution list but it bounced, so I am not sure how actively it is being maintained.
So I am on the lookout for a new tiling window manager. I know Xmonad supports multiple monitors, but I do not know haskell and I was hoping to find something else as well. Xmonad is also not a manual tiler.
So let me know if anyone of you knows of a tiler that has the above support.
EDIT : I have already looked at the Comparison of Tiling Window Managers over at the wiki. Infact I was the one who added Musca's entry in that table.
Last edited by Inxsible (2010-07-13 05:49:13)

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

Does CISCO C3560X VLAN support multiple Network segments which are further configured with HSRP function

Hi Cisco experts,
My name is Kumagai and I need your expert opinions below.
I am trying to configure one VLAN1 support multiple network segments as below.
(this should be a very straight forward configuration and should be OK, I think ? )
interface Vlan1
ip address 172.30.0.0 255.255.128.0
ip address 172.30.31.253 255.255.254.0 secondary
ip address 172.30.61.253 255.255.254.0 secondary
ip address 172.30.71.253 255.255.254.0 secondary
ip address 172.30.4.253 255.255.255.0 secondary
The only issue that is eating me is the above network segments are using HSRP too
and I am not sure is this possible with a combination of VLAN1 supporting multiples which are
further supported with HSRP settings in Cisco environment.
!example of HSRP:
interface Vlan4
ip address 172.30.4.253 255.255.255.0
no ip redirects
standby 4 ip 172.30.4.254
standby 4 priority 105
standby 4 preempt
<<< what will happen if I add the HSRP configuration as below into the above VLAN1 with multiple Network segment ??)
I would like to summarize my "Combined" configurations as below but I need your expert opinions on
whether the configuration below is workable without any problem ??
Or it is a total flop because Cisco does not support the configuration below !!!
interface Vlan1
ip address 172.30.0.0 255.255.128.0
ip address 172.30.31.253 255.255.254.0 secondary
ip address 172.30.61.253 255.255.254.0 secondary
ip address 172.30.71.253 255.255.254.0 secondary
ip address 172.30.4.253 255.255.255.0 secondary
standby 30 ip 172.30.31.254
standby 30 priority 105
standby 30 preempt
standby 60 ip 172.30.61.254
standby 60 priority 105
standby 60 preempt
standby 70 ip 172.30.71.254
standby 70 priority 105
standby 70 preempt
standby 4 ip 172.30.4.254
standby 4 priority 105
standby 4 preempt
Thanking you in advance !!!!!

Hi,
As far as i know we dont set the ip helper address on the radio interface. It should be on the L3 interface of corresposding VLANs i.e.
int vlan 20
ip helper-address 192.168.33.xxx
int vlan 60
ip helper-address 130.20.1.xxx
I'm assuming that your using SVI's (int Vlan 20 and int Vlan 60) rahter than physical interfaces. Also hope you have configured switch port as trunk where this AP is connected.
Modify the AP config as below since you are using data vlan as the native vlan
interface Dot11Radio0.20
encapsulation dot1Q 20 native
interface FastEthernet0.20
encapsulation dot1Q 20 native
Ideally your AP fastethernet configuration should looks like below and not sure how you missed this as this comes by default when you have multiple vlans for multiple ssids.
interface FastEthernet0.20
encapsulation dot1Q 20 native
no ip route-cache
bridge-group 20
no bridge-group 20 source-learning
bridge-group 20 spanning-disabled
interface FastEthernet0.60
encapsulation dot1Q 60
no ip route-cache
bridge-group 60
no bridge-group 60 source-learning
bridge-group 60 spanning-disabled
Hope this helps.
Regards
Najaf

I want to use multiple colors in the same box - Pantone plus process. I am trying to create a support plate of cyan under a PMS.

I want to use multiple colors in the same box - Pantone plus process. I am trying to create a support plate of cyan under a PMS.

How is the external drive formatted?
Allan

Which units support multiple inbound L2TP VPN connections?

Hello. I have a Mac OS X Server that I want to use as a L2TP VPN server for my remote Mac clients. Are there any Linksys routers that support multiple inbound L2TP connections? (The remote clients are 1 person per one location, so there won't be a problem with multiple outbound VPN clients where they are.)
Thanks
DavidMessage Edited by dmcheng on 09-14-2006 01:38 PM
Solved!
Go to Solution.

The WRV200 supports 50 tunnels.The BEFVP41 supports 70 tunnels .Even the RV series is good So you have a lot of choices here.

LDAP supporting multiple DNS domains

I have an environment with multiple DNS domains, and am configuring a Directory server (DS 6.3.1) to centralize various OS configuration maps including user authentication. None of the DNS domains have unique data, so I'd like to do something like storing all the real data in one suffix, then somehow have all clients look to that primary suffix. I am aware that the Solaris Native LDAP client wants to bind to a nisDomainObject that matches its DNS domain. I'm just having a hard time believing that I really need to manage all those individual suffixes when they don't have unique data requirements.
Take as an example the following domains to be supported: foo.example.com, bar.example.com, dev.example.com, qa.example.com, prd.example.com (no hosts are actually in "example.com", they are all in subdomains). Again, all share common configuration data, same user IDs, etc - no unique maps are required.
I created a suffix, "dc=example, dc=com", set it up with idsconfig. All is well there.
[A] My first thought is to bind all Solaris clients, regardless of their DNS domain, to the baseDN of "dc=example, dc=com" in order to avoid having a separate suffix for each DNS domain. I tried to do this using "-a defaultSearchPath=dc=example,dc=com" with ldapclient init, but it failed with an error indicating it wants to see the nisDomainObject of its real DNS domain.
The second though I had, which I don't believe is possible, is to find some sort of a LDAP equivalent of a symbolic link so that I could actually have an object for each DNS domain, but it would simply point back to "dc=example,dc=com". I can't find anything in the documentation which suggests this is possible, but I'd love to be wrong!
[C] Perhaps this could be somehow done with a rats nest of SSDs, but that really seems unwieldy, right? I plan on using a fair amount of the available objects, so it would be many SSDs per suffix. Yuck.
Can anyone comment on my above thoughts, or provide how they would go about supporting multiple DNS domains that have common configuration data?
Thank you,
Chris

Ok, I answered my own question. Turns out it's pretty easy. Just use the "-a domainName=example.com" option with `ldapclient` then make sure that the FQDN of the LDAP server is available (or use its IP address). My problem was that the ldapclient overwriting nsswotch.conf was clobbering the SSL session because I used the FQDN which couldn't resolve.
This leaves an interesting condition of having the output of "domainname" not match the DNS domain. I'm testing now to see if this causes any unexpected issues with our environmnet, but I suspect it's not a problem.

Cisco Jabber client to support Multiple e-mail domains

Hi All,
Per the following link, CUCM an IM&Presence starts supporting multiple domains at version 10:
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/rel_notes/10_0_1/delta/CUCM_BK_C206A718_00_cucm-new-and-changed-1001/CUCM_BK_C206A718_00_cucm-new-and-changed-1001_chapter_010.html#CUCM_RF_I31EA3AB_00
However, we have heard from Cisco that there is NO Jabber client that works with version 10 to support multiple email domains.
This may or not may be true.
Can someone who has connection with BU confirm this? If there is Jabber client that supports multiple email domains, what is the version and when is it going to be available?
Thanks,
Mustafa

Per-Olov
How are you dealing with this DA restriction?
Also, what are your comments about the use of Domain Alias vs. Domain with inetdomainbaseDN pointing to my organization? Which one was your choice?
Thanks,
Ivo

RDBMS Security Store supporting multiple domains

Can one instance of the RDBMS Security Store be utilized to support multiple WLS 10.3.2 domains?
I have several 10.3.2 domains, all of which have clusters and role requirements? The documentation 'suggests' one Store per domain, but all of the tables in the schema contain DOMN (domain) and REALMN (realm) columns that would seem to indicate domain independence. It would be nice to be able to manage one Store schema that supports several Domains.

Hi,
The document which you are referring is for WLS 10.0 and RDBMS security is introduced from WLS 10.3.0 onwards.
The reason why RDBMS security store should not be stored between two domains is RDBMS security store is used by authorization, role mapping, credential mapping, and certificate registry providers.
Once the RDBMS security store is configured in a domain, an instance of any of the preceding security providers that has been created in the security realm automatically uses only the RDBMS security store as a datastore, and not the embedded LDAP server.
It is just the replacement for Embedded LDAP.
Thanks & Regards,
Murali.
============

Supporting multiple companies with JES6

I have been trying to find instructions to support multiple companies using email, calendar, and IM on a single installation of JES6 (messaging, calendar, IM, delegated admin, independent convergence, etc). I have had no luck.
The sales pitch talks a great story about scalability, so I must be missing something. Sun Docs does not have Messaging Server 7.0 yet. The wiki that the product page sends you to is incomplete. I am not sure when Sun made the decision to not require complete documentation before a product is released, but I find that frustrating.
I see that I can add multiple domains in Delegated Administrator, but this does not create separate partition areas in Messaging Server. I believe that you need to separate each company's email and calendar so that conflicts in names don't happen.
Can someone direct me to a document or tell me how to do this? Please?

workman99 wrote:
I have been trying to find instructions to support multiple companies using email, calendar, and IM on a single installation of JES6 (messaging, calendar, IM, delegated admin, independent convergence, etc). I have had no luck.Log into Delegated Administrator and create a new organisation for each of the companies you wish to support. This organisation will require a domain-name e.g. somecompany.com (hence the term "hosted domain"). The users in the company then log into Messaging/Calendar/Convergence with [email protected].
The sales pitch talks a great story about scalability, so I must be missing something. Hosted/Virtual domain functionality is in use by a number of companies to provide the very functionality you refer to.
Sun Docs does not have Messaging Server 7.0 yet. There is no intention to provide static PDF based docs for communication-suite-6 products (which include MS7.0) going forth.
The wiki that the product page sends you to is incomplete.How exactly is it incomplete? Where there are differences between MS6.3 and MS7.0 they are documented on the http://wikis.sun.com/display/CommSuite/ site.
I am not sure when Sun made the decision to not require complete documentation before a product is released, but I find that frustrating.Once again, what exactly is not complete. Sweeping statements aren't really constructive. The wiki format has provided the ability to provide much quicker updates and enhancements to the documentation then was previously possible with the publish-once PDF guide mechanism.
I see that I can add multiple domains in Delegated Administrator, but this does not create separate partition areas in Messaging Server. I believe that you need to separate each company's email and calendar so that conflicts in names don't happen. You don't require separate partitions as Messaging Server and Calendar Server both use the hosted domain information in their storage e.g.
bash-3.00# ./mboxutil -lxp user/[email protected]/INBOX
msgs Kbytes last msg         partition   quotaroot mailbox path and acl
     3     240 2008/04/03 07:28 primary          5120 user/[email protected]/INBOX /opt/SUNWmsgsr/data/store/partition/primary/=user/b7/e4/=testuser@hosted%dsun%dcom [email protected] lrswipcda
bash-3.00# ./mboxutil -lxp user/shjorth/INBOX
msgs Kbytes last msg         partition   quotaroot mailbox path and acl
     6      37 2008/09/12 13:08 primary          5120 user/shjorth/INBOX /opt/SUNWmsgsr/data/store/partition/primary/=user/c4/31/=shjorth shjorth   lrswipcdaSo in the above example "testuser" is in the hosted.sun.com hosted domain and "shjorth" is in the aus.sun.com default domain. The default domain does not have the domain information appended in the path and is treated as a special case.
bash-3.00# ./cscal list [email protected]
[email protected]: [email protected] status=enabled
bash-3.00# ./cscal list [email protected]
[email protected]: [email protected] status=enabledFor calendar server, the domain of the user is appended to the UID thus providing for separate UID name-spaces for each hosted-domain organisation.
Regards,
Shane.

Looking for a client/server that supports multiple protocol and delivery

Hi all, I don't know if this the right place to ask my question,here it goes.
I am looking to develop a client-server that supports multiple protocols such as HTTP, HTTPS etc. I am looking for a framework( i don't know if that is correct or I need some kind of web-service (soap etc)) that would manage connection, security etc. I would like to like to devote most of my time in developing business objects with multiple delivery mechanism such as sending serilized java objects, xml message or soap message, or in some case JMS message as well. So I need a client server that can come in via TCP/IP or HTTP or anyother industry standard protocol and I should be able to service him with pub/sub model and also request/response model as well.
I don't know if I had explained what I need, I would like to know what technologies I should be evaluating and which direction I should be heading... Also the server I'm developing should be free of Java constraints if needed...
Also this service is not webbased service as now but if need arises I should have a flexibilty to make them web enabled in future. Also I would like to work with open source webservers or appservers if I need

Inxsible wrote:I installed i3 - along with the i3status - which I still have to figure out. I am liking what I see as of now. It reminds me of wmii -- when I used it way back when. However I do not like the title bar. I would much rather prefer a 1 px border around the focused window.
"i3 was created because wmii, our favorite window manager at the time, didn't provide some features we wanted (multi-monitor done right, for example), had some bugs, didn't progress since quite some time and wasn't easy to hack at all (source code comments/documentation completely lacking). Still, we think the wmii developers and contributors did a great job. Thank you for inspiring us to create i3. "
To change the border of the current client, you can use bn to use the normal border (including window title), bp to use a 1-pixel border (no window title) and bb to make the client borderless. There is also bt which will toggle the different border styles.
Examples:
bindsym Mod1+t bn
bindsym Mod1+y bp
bindsym Mod1+u bb
or put in your config file
new_window bb
from: http://i3.zekjur.net/docs/userguide.html (you probably already found that by now )

OSB (11.1.1.7): Can OSB/Weblogic (11.1.1.7) support multiple PKIs (Public Key Infra-structure)

Hi All,
Would you be able to help me in understanding if OSB/Weblogic (11.1.1.7) can support multiple private key's in the domain to enable 2-SSL W/S calls ?
Solution walk-through :
A 3rd Party Web Service is only accessible via 2-way SSL http channel. To achieve this, OSB is required to use the private key which is issued by 3rd party. This private key and 3rd party root certificate (CA) need to be installed into OSB’s keystore which is based on Java Keystore format.
The private key (issued by 3rd Party) will be used by OSB for identity signature. This private key is bound to IP address of the OSB machine calling the 3rd Party web service. Also, 3rd Party root certificate (CA) will be used by OSB to verify the identity of 3rd Party web service.
Given the private key is used as the identity of the system and should be guarded closely by the target system, we believe this approach needs to be reviewed and assessed accordingly.
Limitations and drawbacks with the current solution :
1. The private key of OSB system is issued and controlled by an external application vendor.
2. OSB is enforced to use this private key and its signature algorithm for other external parties’ interactions. The current client certificate issued by 3rd Party is X509v3 certificate which uses RSA, with a 2048-bit key size, signed with a SHA-512 hash.
3. The SSL is self-signed, not signed by a publicly trusted cert provider (i.e. VeriSign)
4. Extra dependency on external vendor systems as the key provider. Currently, the keys are bound to server IP address; any changes to the production environment, (i.e. adding new nodes) will require a new key to be generated by 3rd Party system. In case 3rd Party is no more used in the future, the keys can no longer be generated.
Conclusion : OSB does not support multiple PKIs (Public Key Infra-structure) which is a mapping mechanism that OSB uses to provide its certificate for SSL connecitons to the server. Multiple private keys, require multiple PKIs which OSB does not handle.
So, do you agree that OSB/Welblofic (11.1.1.7) could not support multiple private key issued by more than one 3rd party vendor ?
Thanks,
Kunal Singh

Hi Kunal,
Although it is recommended to have 1 key pair for 1 identity store as it represents unique identity of your domain but you can:
import multiple key-pairs in your identity store
Configure PKI credential mapper to use reference of identity store consisting of multiple keys
When in your OSB project, you create Service Key provider(SKP) then it loads all the private keys present in identity store referred by PKI mapper. It will browse both the keys.
Depending on your requirement, you can choose different key pair for for different SKPs for "Client Authentication key" section(For SSL) and "Signature key" for DigiSign.
Please let me know if i understood your query correctly and above helps.
Regards,
Ankit

Which Supporting Components do I need if I only want to Install Photoshop from CS4

I want to install Photoshop only from my Creative Suite (CS4). Which Supporting Components do I need to install? I only want to install what I need and nothing more.

When I want to do a custom install, it gives me the option to install these Supporting Components:
Adobe After Effects CS4 Presets
adobe CMaps CS4
Adobe CSI CS4
Adobe Color - Photoshop Specific CS4
Adobe Color EU Extra Settings CS4
Adobe Color JA Extra Settings CS4
Adobe Color NA Recommended Settings CS4
Adobe Color Video Profiles AE CS4
Adobe Color Video Profiles CS CS4
Adobe Default Language CS4
Adobe Dynamiclink Support
Adobe ExtendScript Toolkit CS4\
Adobe Fonts All
Adobe Linguistics CS4
Adobe MotionPicture Color Files CS4
Adobe Output Module
Adobe PDF Library Files CS4
Adobe Photoshop CS4 Support
Adobe Search for Help
Adobe Service Manager Extension
Adobe Type Support CS4
Adobe Update Manager CS4
Adobe Utilities CS4
Adobe WinSoft Linguistics Plugin
Adobe XMP Panels CS4
AdobeColorCommonSetCMYK
AdobeColorCommonSetRGB
Connect
PDF Settings CS4
Photoshop Camera Raw
kuler

Custom Infotype to support Multiple language

Hi Experts,
i need help in creating a custome infotype which should able to support multiple language.
kindly help how to do that.
points will be rewarded for helpful answers.
Best Regards,
Rahul
Message was edited by:
Rahul Kumar Gupta

Hello rahul,
I dont think it need any special settings.You can have a look at
infotype 0182 as reference.Normally this infotype supports multiple language.
Reward points if useful.
Regards,
Manoj.

Can ACS support multiple Active Directory Domains for 802.1x EAP-TLS?

Hi
I'm looking to implement ACS 5.2 using 802.1X, we have two seperate AD domains.
Now.. this is the tricky part...
A single switch will need to support both ADs, so if a machine in AD1 is connected, it will be authenticated to the ACS using AD1 and applied to VLAN1, while a machine that is in AD2 will be authenticated to AD2 and applied to VLAN 2.
I'm looking at machine authentication, not user authentication, so I assume that I will need to import two certs from each AD.
Can any expert please let me know if they think that this will be possible please??
Many thanks

Yes ACS can support multiple AD domains but you will have to configure one as your AD domain and the other as an LDAP database and this will work since you are planning to use eap-tls.
The question I have is which version of ACS are you using? If you are using ACS 5.x then you can setup and identity store sequence so if the user is not found you can move to the next store and this will prevent you from installing two certificates on every machine.
You can then setup an authorization rule for the seperate containers on where the workstations are located (this is assuming machine authentication is being used) for the AD database or the LDAP database and then assign the vlan based off that.
Thanks and I hope this helps!
Tarik Admani

Does JTree support multiple DnD?

I'm working on an applet which displays a JTree tree, which has to support multiple DnD.
i mean, user has to be capable of selecting several nodes at a time and drag all of them, dropping them into a target.
Though i have asked about it, and somebody told me about it, the solution was with a JFrame, and all the examples which work and i've read, arre with JFrame.
So i guess that maybe JTree does not support multiple DnD, and moreover, there is a website
http://bugs.sun.com/bugdatabase/view_bug.do?bug_id=4165577
in which someone says that, in fact, JTree does not support it. But it's and old page, so i want to know if at present, Jtree still has this debug.
Thanks in advance!

http://www.java-forum.org/de/viewtopic.php?p=139820#139820

Awt textarea which supports multiple colors!!!

Similar Messages

Maybe you are looking for