B10 build TableView row selection causes columns to stretch out of order

When running the following css on a tableRow to change the selected highlight colour. If you have 50 of more rows and need to use the arrow keys to scroll the columns become stretched and out of order
.table-view .indexed-cell .cell: selected {
-fx-border-color: #f8c27f;
-fx-background-color: rgb(230,230,230);
}

Could you please post a bug in the JavaFX Jira at http://javafx-jira.kenai.com. If you file it under the 'runtime' section against the 'controls' component, it will be looked at as soon as possible. Ideally you'd include a small test application as an attachment.
Thanks!
-- Jonathan

Similar Messages

Cause 1 = 0x82A6 Network out of order - ISDN error

When we are try to make outgoing call, we are getting the below error :
cause 1 = 0x82A6 Network out of order
Incoming call there is no problem in the Same E1 PRI line, ISP saying there is no problem from thier side.

We are using h323 gateway. When I am using csim start the outgoing calls fails
ISA-VG1#un all
All possible debugging has been turned off
ISA-VG1#csim start 93XXX6306
csim: called number = 93XXX6306, loop count = 1 ping count = 0
csim err csimDisconnected recvd DISC cid(570049)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
Router#sh gateway
H.323 ITU-T Version: 4.0   H323 Stack Version: 0.1
H.323 service is up
This gateway is not registered to any gatekeeper
Alias list (CLI configured) is empty
Alias list (last RCF) is empty
ISA-VG1#csim start 93XXX6306
csim: called number = 934466306, loop count = 1 ping count = 0
*Feb 5 13:06:47.949 UTC: ISDN Se0/3/0:15 Q931: Sending SETUP callref = 0x3957
callID = 0xCE73 switch = primary-net5 interface = User
*Feb 5 13:06:47.953 UTC: ISDN Se0/3/0:15 Q931: TX -> SETUP pd = 8 callref = 0x
3957
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
        Called Party Number i = 0x80, '34XXX6306'
                Plan:Unknown, Type:Unknown
*Feb 5 13:06:48.049 UTC: ISDN Se0/3/0:15 Q931: RX <- SETUP_ACK pd = 8 callref
= 0xB957
        Channel ID i = 0xA9839F
                Exclusive, Channel 31
csim err csimDisconnected recvd DISC cid(570048)
csim: loop = 1, failed = 1
csim: call attempted = 1, setup failed = 1, tone failed = 0
ISA-VG1#
*Feb 5 13:06:48.049 UTC: ISDN Se0/3/0:15 Q931: RX <- CALL_PROC pd = 8 callref
= 0xB957
        Progress Ind i = 0x8288 - In-band info or appropriate now available
*Feb 5 13:06:48.097 UTC: ISDN Se0/3/0:15 Q931: RX <- RELEASE pd = 8 callref =
0xB957
       Cause i = 0x82A6 - Network out of order
*Feb 5 13:06:48.097 UTC: ISDN Se0/3/0:15 Q931: TX -> RELEASE_COMP pd = 8 callr
ef = 0x3957
Incoming calls are perefect, Please let me know the problem is from ISP Side ?

CUCM and H323 gateway-Cause i = 0x80A6 - Network out of order

Hi,
I cant get calls into the CUCM from a H323 gateway. Incoming external calls here out of service message or Number Unobtainable. I've attched logs if anyone can help?
Rich

Hi Alex,
Thanks for reply. I should've attached the full config as it shows the Translation Rules. See below.
Can anyone help?
voice translation-rule 2
rule 1 /^56/ /5\2/
rule 2 /^6/ /5/
rule 3 /2/ /52/
voice translation-rule 3
rule 1 /^1$.........$$/ /01\1/
rule 2 /^2$.........$$/ /02\1/
rule 3 /^7$.........$$/ /07\1/
rule 4 /^8$.........$$/ /08\1/
rule 5 /^4$......$$/ /01914\1/
rule 6 /^2$......$$/ /01912\1/
voice translation-rule 6
rule 1 /^[1-9]/ /90\0/ type international international
voice translation-rule 7
rule 1 /^1/ /901/
rule 2 /^2/ /902/
rule 3 /^3/ /903/
rule 4 /^4/ /904/
rule 5 /^5/ /905/
rule 6 /^6/ /906/
rule 7 /^7/ /907/
rule 8 /^8/ /908/
rule 9 /^9/ /909/
voice translation-profile INCOMING
translate calling 7
translate called 2
voice translation-profile OUTGOING
translate called 3
voice-card 0
dsp services dspfarm
interface FastEthernet0/0
ip address 192.168.178.66 255.255.255.192
ip pim dense-mode
duplex auto
speed auto
h323-gateway voip interface
h323-gateway voip bind srcaddr 192.168.178.66
interface FastEthernet0/1
no ip address
duplex auto
speed auto
no keepalive
interface BRI0/1/0
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
interface BRI0/1/1
no ip address
isdn switch-type basic-net3
isdn point-to-point-setup
isdn incoming-voice voice
isdn static-tei 0
control-plane
voice-port 0/1/0
translation-profile incoming INCOMING
compand-type a-law
cptone GB
description ISDN2 .......... lines 1+2
voice-port 0/1/1
translation-profile incoming INCOMING
compand-type a-law
cptone GB
description ISDN2 .......... lines 3+4
ccm-manager music-on-hold
mgcp fax t38 ecm
dial-peer cor custom
dial-peer voice 999 pots
destination-pattern 999
port 0/1/0
forward-digits all
dial-peer voice 9991 pots
destination-pattern 999
port 0/1/1
forward-digits all
dial-peer voice 112 pots
destination-pattern 9112
port 0/1/0
forward-digits 3
dial-peer voice 1121 pots
destination-pattern 9112
port 0/1/1
forward-digits 3
dial-peer voice 9999 pots
destination-pattern 9999
port 0/1/0
forward-digits 3
dial-peer voice 99991 pots
destination-pattern 9999
port 0/1/1
forward-digits 3
dial-peer voice 100 voip
preference 2
destination-pattern 52...
progress_ind setup enable 3
voice-class codec 1
voice-class h323 1
session target ipv4:192.168.0.150
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 101 voip
preference 1
destination-pattern 52...
progress_ind setup enable 3
voice-class codec 1
voice-class h323 1
session target ipv4:192.168.203.20
dtmf-relay h245-alphanumeric
no vad
dial-peer voice 1 pots
translation-profile outgoing OUTGOING
preference 3
destination-pattern 0T
translate-outgoing called 10
incoming called-number .
fax rate disable
direct-inward-dial
port 0/1/0
forward-digits all
dial-peer voice 11 pots
translation-profile outgoing OUTGOING
preference 4
destination-pattern 0T
incoming called-number .
fax rate disable
direct-inward-dial
port 0/1/1
forward-digits all
dial-peer voice 9 pots
translation-profile outgoing OUTGOING
preference 1
destination-pattern 9T
incoming called-number .
fax rate disable
direct-inward-dial
port 0/1/0
forward-digits all
dial-peer voice 91 pots
translation-profile outgoing OUTGOING
preference 2
destination-pattern 9T
incoming called-number .
fax rate disable
direct-inward-dial
port 0/1/1
forward-digits all
dial-peer voice 2 pots
translation-profile outgoing OUTGOING
destination-pattern 2......
incoming called-number .
fax rate disable
direct-inward-dial
port 0/1/1
forward-digits all
dial-peer voice 21 pots
translation-profile outgoing OUTGOING
destination-pattern 2......
incoming called-number .
fax rate disable
direct-inward-dial
port 0/1/1
forward-digits all
dial-peer voice 52982 voip
preference 1
destination-pattern 562982
progress_ind setup enable 3
voice-class codec 1
voice-class h323 1
session target ipv4:192.168.0.150
dtmf-relay h245-alphanumeric
no vad

I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of

I have downloaded and installed the latest version of numbers on my mac. Everytime I save and then try to reopen that document, I receive a message telling me that I need a new version of numbers. Also, when I try to sort the date column, it sorts out of order. The last version sorted fine.

Welcome to Apple Support Communities
When you install the new iWork version, the old iWork version is kept, so it looks like you are opening your old version.
To fix this, open a Finder window, choose Applications in the sidebar and drag the new Numbers version to the Dock, so you can access to it quickly. Open all documents from this version. I don't recommend you to delete the old Numbers version in case you need it.
Respecting to the second question, you will get better answers in the Numbers for OS X forum

Custom JTable column (JCheckBox) not included in row selection.

I am trying to use JCheckBox (for display only data) as one of my JTable columns. I have written custom cell renderer for the same. Every thing is working fine except that when I select a row, the new custom JCheckBox column is not included in selection. Here is the code that I am using.
    protected class CheckBoxColumnRenderer extends DefaultTableCellRenderer {
        JCheckBox ckb = new JCheckBox();
        public Component getTableCellRendererComponent(JTable table, Object value,
                    boolean isSelected, boolean hasFocus, int row, int column) {
            if (value instanceof Boolean) { // Boolean
              ckb.setSelected(((Boolean) value));
              ckb.setHorizontalAlignment(JLabel.CENTER);
              ckb.setBackground(super.getBackground());
              if (isSelected || hasFocus) {
                  ckb.setBackground(table.getSelectionBackground());
            return ckb;
    }How can I include the custom cell in the row selection.
regards,
nirvan.

they have lots of dependencies and it is not always easy to strip out an SSCCE without a considerable effort.Exactly. And is the cause of the problem the dependencies or something else. The only way to know for sure is to strip out the code and simplify the problem, that way you truly understand what the problem is.
The majority of time this can be done with minimal effort as in this case.
Some times we are sure that the problem is with certain part of the code Is the problem the code or the way the code is invoked? How do we know the TableModel is created properly or that the column class is overwritten correctly when we can't see it?
someone having a third look at it may actually find the enhancement required with ease.Exactly, but we need to see the big picture.
So are you sure that I should post an SSCCE with every possible question where coding is involved ?In the majority of cases a SSCCE is easily created in 5-10 minutes, so if you want the fastest help then yes.
Just twice this past week I was ready to ask a question on the forum and was preparing a SSCCE to post and sure enough both times the creation of the SSCCE caused me to look at the problem differently and I solved it. I would much rather solve a problem on my own then post a question and wait for hours (days) hoping someone else knows the answer.

Number of rows returned by SELECT LAST(column)

I have about 50,000 rows in my MS Acess database table so I have used SELECT LAST(column) AS newField FROM table... to retrieve the last data in the column however when I check the number of rows in the resultset using
resultset.last();
int rowcount = rs.getRow();
rowcnt returns the total no.rows (about 50,000) in the table.
I thought it should just return one.
Is it normal?

Thanks again dcminta. I'll try with your code.
I just wanted to know why resultset returned the number of all records in that column when I only selected the last.
I had the �Invalid Cursor Position� error with "while(rs.next())" as I (thought I) had only one record in the resultset and I was fiddling with my code.
They are all fine now.
Thanks guys.
Booh1(old lady)

How to select rows with duplicate column values

hi,
i have a table property_details which has these 2 columns customerno and propertyno a customer can have many properties and property number has to be unique. but somehow these property number has been duplicated at an earlier stage so i have for a customer with many properties the same property number
how i will select such records whose asset numbers are the same
for ex
customer no property no
a1300 1
a1300 1
a1300 1
a2330 10
a2330 10
a2330 10
kindly suggest me a solution

this example might be of help.
SQL> select * from employees;
YEAR EM NAME       PO
2001 02 Scott      91
2001 02 Scott      01
2001 02 Scott      07
2001 03 Tom        81
2001 03 Tom        84
2001 03 Tom        87
6 rows selected.
SQL> select year, empcode, name, position,
2         row_number() over (partition by year, empcode, name
3                            order by year, empcode, name, position) as rn
4    from employees;
YEAR EM NAME       PO         RN
2001 02 Scott      01          1
2001 02 Scott      07          2
2001 02 Scott      91          3
2001 03 Tom        81          1
2001 03 Tom        84          2
2001 03 Tom        87          3
6 rows selected.
SQL> Select year, empcode, name, position
2    From (Select year, empcode, name, position,
3                 row_number() over (partition by year, empcode, name
4                                    order by year, empcode, name, position) as rn
5            From employees) emp
6   Where rn = 1;
YEAR EM NAME       PO
2001 02 Scott      01
2001 03 Tom        81
SQL>

Select a column in a rows

I want to select a column in a row.
suppose,
empno
1
2
3
4
5
I want op like,
1 2 3 4 5

Like this...
SQL> ed
Wrote file afiedt.buf
1 select max(decode(rn, 1, empno)) as emp1
2        ,max(decode(rn, 2, empno)) as emp2
3        ,max(decode(rn, 3, empno)) as emp3
4        ,max(decode(rn, 4, empno)) as emp4
5        ,max(decode(rn, 5, empno)) as emp5
6        ,max(decode(rn, 6, empno)) as emp6
7        ,max(decode(rn, 7, empno)) as emp7
8        ,max(decode(rn, 8, empno)) as emp8
9        ,max(decode(rn, 9, empno)) as emp9
10        ,max(decode(rn, 10, empno)) as emp10
11        ,max(decode(rn, 11, empno)) as emp11
12        ,max(decode(rn, 12, empno)) as emp12
13        ,max(decode(rn, 13, empno)) as emp13
14        ,max(decode(rn, 14, empno)) as emp14
15        ,max(decode(rn, 15, empno)) as emp15
16        ,max(decode(rn, 16, empno)) as emp16
17        ,max(decode(rn, 17, empno)) as emp17
18        ,max(decode(rn, 18, empno)) as emp18
19        ,max(decode(rn, 19, empno)) as emp19
20        ,max(decode(rn, 20, empno)) as emp20
21 from (
22        select empno, row_number() over (order by empno) as rn from emp
23*      )
SQL> /
      EMP1       EMP2       EMP3       EMP4       EMP5       EMP6       EMP7       EMP8       EMP9   EMP10         EMP11      EMP12      EMP13      EMP14      EMP15      EMP16      EMP17      EMP18      EMP19      EMP20
      7369       7499       7521       7566       7654       7698       7782       7788       7839    7844          7876       7900       7902       7934
SQL>

Disable DataGrid row selection for a column?

Hi,
I have a DataGrid with a CheckBox in one column. When the CheckBox itself is clicked, or any point in the CheckBox column
is clicked, I *don't* want the grid row selected. IOW, row selection should be disabled for the column. How to get this behavior?
Thanks, Garry

Hi All,
I do have almost similar requirement where I have image overlay-ed on row, on whose click a context menu should appear but row should not get selected.
Row selection should happen if user clicks elsewhere on that row (apart from overlayed image).
I tried below lines in MouseClick event listeners.
event.stopImmediatePropagation();
event.stopPropagation();
Above lines stopped itemClick event but didnt prevent the row selection.
Regards,
Pavan

Capture the rows selected ,tableView

Hi Friends,
I have a requirement and i was searching in the forum and i have seen the same question been asked
Capture the rows selected in a multiselect table view (BSP)   but i couldn't able to judge how the thread is closed
We have a tableView that is filled on selecting a value from a dropDownListBox.
and now i select some rows from the table view and click on a button(say btn_ok)
now the data is processed .
now what is my requirement is when   i again run the page and select the same drop down value i want to see the rows to be already selected for which i have done before
example
dropdown -
> a is selected
table view
1----> selected
2
3---->selected
4
5---->selected
6
btn ok
next time i want to c these selected rows already as SELECTED
Regards
Bhavana

Hi,
Are you able to fetch single row? If yes then debug and try to solve it. I don't have SAP System right now but this will help you. First change your table selection mode "Multiple". After that write following code in your "OnInputProcessing"
Sending Selected Field to the calling Screen
DATA : tv      TYPE REF TO cl_htmlb_tableview,
       tv_data TYPE REF TO cl_htmlb_event_tableview,
       event   TYPE REF TO cl_htmlb_event.
tv ?= cl_htmlb_manager=>get_data(
        request = runtime->server->request
        name    = 'tableView'
        id      = 'tv_field' ).
     RECEIVING
       data    = tv.
tv_data = tv->data.
w_field = tv_data->row_key.
Where w_field is your field name. By the way this I used to get one row. Try debugging and may be you will find your way.
Thanks,
Muhammad Usman

Multi selection N rows and N Columns

i am using ADF 10g jdeveloper 10.1.3.5
i want make multi selection(Check box) in 3 row and N columns depend on size of iterator, can give example or .....
thanks

Option 3 signal in and out.
1. From table1 drag a line and select Signal Out.
2. Select the fields you want and click ok.
In this example will use:
field name x data type number
                y data type date
                z data type text.
3. Add a submit button to the table.
   Right Click on table and select create tool bar.
- Click on plus sign to add a button.
- Click Change button action to system action.
- Change action name to a desired name.
Click on the line that connect the signal out to the table and change the event name to submit.
4. Click on Compose and drag a signal in to the story board.
5. Connect the Signal in to the second Web service.
6. <b>Change the Signal in name to much the signal out name</b>
7. Add fields to the signal in:
Field name x data type number
                y data type date
                z data type text.
8. Click on the line that connect the Signal in to the second web service and map the fields.
9. Add a table view to the Second web service.
Deploy.
For me it worked only when I have changes the Capacity of the first web service.
If you need the GML file with the web services I used please email me at
[email protected]

Select column, but group rows inside that column first

Hi,
I have a scenario where I want to show data from a column, but the column has multiple entries of the 'same' entry.
id company
1 burger_king
2 mcdonalds
3 mcdonalds_east
4 diary_queen
5 mcdonalds_west
I want to be able to show all companies but group the mcdonalds companies.
Any suggestions on how to do that?
Thanks.

Here's a funky way (if I haven't misread the requirement):
SQL> -- generating sample data:
SQL> with t as (
2 select 1 id, 'burger_king' company from dual union
3 select 2, 'mcdonalds' from dual union
4 select 3, 'mcdonalds_east' from dual union
5 select 4, 'diary_queen' from dual union
6 select 5, 'mcdonalds_west' from dual
7 )
8 --
9 -- actual query:
10 --
11 select id
12 ,     company
13 from ( select id
14          ,      company
15          ,      row_number() over (partition by soundex(company) order by id) rn
16          from   t
17        )
18 where rn = 1;
        ID COMPANY
         1 burger_king
         4 diary_queen
         2 mcdonalds
3 rows selected.

Tableview disappears on row-selection

hi all,
the data in my tableview is huge and if i try to select any row, the tableview completely disappears for a long time and when it appears, the row remains unselected. Same thing happens for any other event on tableview like scrolling through it .
In layout, the debugger hangs on for a long time at "visibleRowCount".
someone plz suggest what should be checked in such cases.
thanks

Hi,
Yeah, i have used an iterator for setting field order (there are around 46 fields).
Can this be the reason? But i am creating the iterator object in "oninitialization" event and i make sure that this code(iterator object creation) does not run on "row selection" .
I tried to debug the code in events, there it even shows which particular row was selected (in selectedrowindex). After debugger finishes, the tableview disappears.
Do i need to do something in iterator?
Thanks,
Shalaxy

Selecting both - Column and Rows in ALV Grid

Hi All,
I am developing a module pool in which in a ALV Grid Display the user wants to select multiple rows and multiple columns.
How to set this in ALV grid? Right now I can set selection of multiple rows but once user clicks on column the rows are deselected and the column gets selected.
Similarly when user selects on one column and clicks on another column the previous selected column gets deselected.
Is there any way to do this in ALV Grid?
Thanks,
Rashmi.
PS: I am using OO ALV for this development.

Hi Andrey,
I know this. I was just trying to find out if there is some other alternative to this.
Anyways, this seems to be the only choice.
Thanks,
Rashmi.

Disabling resize on row selected column in DataGridView

Hi,
In my application, I have managed to disable resizing of my data columns on my DataGridView, but the only column that I cannot disable the resize feature is on the row select column, you know, the one which shows which row is currently selected (also shows the little pencil when the line is being edited).
Can someone help me identify how to disable this please? I'm using VS2005 pro and C#.
I'm doing this programmatically because my program uses many different databases. I currently do things like:
this.myDataGridView.Columns["LineIndex"].width = 100;
this.myDataGridView.Columns["LineIndex"].Resizable = DataGridViewTriState.False;
Can I do the same sort of thing to fix the width of the row selection column? I don't want to hide it, just stop the resizing of this column!
Thanks
Sean

This option disables columns re-sizing at all, also if property AllowUserToResizeColumns =True ...Did you know how can I to enable to user to resize all columns, except "selector column" (the column with the arrow)? Thanks

B10 build TableView row selection causes columns to stretch out of order

Similar Messages

Maybe you are looking for