B12File empty CSV

Hi experts,
Im working with the SAP elearning scenarios but my .csv file is empty can any one help me? This is my Atom0

I have seen this happen. usually it happens when I convert an AP, while connected to the network. It seems the conversion tool, will add the AP to the auth-list on the controller, but only seems to store a local .csv if it is not connected to the network.

Similar Messages

Empty CSV Output

Hi,
I have a simple report. I can see the result on screen, but when I click on the link to export it as a csv file, I get an empty file with NO_DATA_FOUND.
Why?
Thanks

Hi,
I've typically seen this with select lists or other items that need a default. Even though a default value is set on the item, it's not available until the page is submitted. So, even though it looks ok on the page, the report's export doesn't know about it. I usually set the default values using page computations (set to run only when the item is null) - that way, both the page and the export know about the value. It could be that creating your variable has achieved the same result
Andy

Empty CSV exports of data from interactive reports.

Currently using version 4.2.1.00.08 of APEX. My application has interactive reports; when I try to export data to CSV file, it is empty. Tried HTML, that just has the control widget for the report. I could swear this used to work. Thanks for any help.
-jg-

Hi!
Check that the RFC is set as a trusted connection and it uses the current user for the connection.
Check that you use the same user in RSCUSTV3 as in the source system you have set up in RSA1 for the REP and the BI client.
Check that the user you use for this is configured as follow
- On the tab Logon data select System as User Type, SUPER as User group and also enter an initial password; use password welcome.
- On the tab Roles assign the roles SAP_BC_USR_CUA_CLIENT and SAP_BC_USR_CUA_SETUP_CLIENT (Valid From and Valid to should be left empty). In addition, assign the profiles S_BI-WHM_RFC and S_BI-WX_RFC on the tab Profiles.
rollo

Empty .csv file (after conversion to LWAPP)

has anyone encountered the above-mentioned? Flashing the AP from autonomous to lightweight generates the .csv file but it's empty.

I have seen this happen. usually it happens when I convert an AP, while connected to the network. It seems the conversion tool, will add the AP to the auth-list on the controller, but only seems to store a local .csv if it is not connected to the network.

Cisco 1200 empty .csv file

I have flashed the cisco 1200 ap using the upgrade utility. Everything checks out ok but the .csv file is empty.Did i miss something here?
Details
Model:AIR-AP1232AG-S-K9
Autonomous IOS:12.3(7)JA2
Lightweight IOS:
c1200-rcvk9w8-tar.123-11JX1

The MIC is a Machine Installed Certificate. The AP has the certificate already installed, there is no need to
generate a self-signed certificate. That is why the .csv file is empty. You will not have to put any certificate information on WLC/WCS for this AP.

Getting empty csv file using servlet

Hi
i am working on reports for my web application and i used struts frame work.
for my reports i want csv export, so for that i written servlet, once if i click generate button i am able to open popup window to save the generated csv file at my local system, but i am getting emplty csv file..
nothing si ther ein that file forget abt data atleast my header fields.
here is my servlet file..plz let me know where i am doing wrong..
public class ReportServlet extends HttpServlet{
     public void doPost(HttpServletRequest req,HttpServletResponse res)
throws ServletException,IOException
PrintWriter out = res.getWriter();
res.setContentType("text/csv");
res.setHeader("Content-Disposition","attachment; filename=\"export.csv\"");
out = res.getWriter();
AdvDetailReportBean reportBean = null;
ArrayList list =(ArrayList)req.getSession().getAttribute("advreportlist");
System.out.println(" servlet report list size is"+list.size());
String branchcode=(String)req.getSession().getAttribute("branchcode");
          String bName=(String)req.getSession().getAttribute("branchname");
          System.out.println(" servlet branch name"+bName);
          System.out.println(" servlet branch code"+branchcode);
StringBuffer fw = new StringBuffer();
          fw.append("Branch Code");
          fw.append(',');
          fw.append("Branch Name");
          fw.append('\n');
          fw.append(branchcode);
          fw.append(',');
          fw.append(bName);
          fw.append('\n');
          fw.append('\n');
          fw.append("Customer Name");
     fw.append(',');
     fw.append("Constitution Code");
     fw.append(',');
     fw.append("Customer Status");
     fw.append(',');
     fw.append("Restructure Date");
     fw.append(',');
     fw.append("Total Provision");
     fw.append(',');
     fw.append("Limit Sanctioned");
     fw.append(',');
     fw.append("Principal");
     fw.append(',');
     fw.append("Balance");
     fw.append(',');
     fw.append("AccountID");
     fw.append(',');
     fw.append("Collateral SL No");
     fw.append(',');
     fw.append("Issue Date Of Collateral");
     fw.append(',');
     fw.append("MaturityDate Of Collateral");
     fw.append(',');
     fw.append("Subsidy");
     fw.append(',');
     fw.append("Guarantor SL No");
     fw.append(',');
     fw.append("Guarantor Rating Agency ");
     fw.append(',');
     fw.append("External Rating of Guarantor");
     fw.append(',');
     fw.append("Rating Expiry Date");
     fw.append(',');
     fw.append("Guarantee Amount");
     fw.append(',');
     fw.append('\n');
     for (Iterator it = list.iterator(); it.hasNext(); )
          reportBean = new AdvDetailReportBean();
          reportBean = (AdvDetailReportBean)it.next();
          fw.append(reportBean.getCustomername());
          fw.append(',');
          fw.append(reportBean.getConstitutionCode());
          fw.append(',');
          fw.append(reportBean.getCustomerStatus());
          fw.append(',');
          fw.append(reportBean.getRestructureDate());
     fw.append(',');
     fw.append(reportBean.getTotalProvision());
     fw.append(',');
     fw.append(reportBean.getLimitSanctioned());
     fw.append(',');
     fw.append(reportBean.getPrincipal());
     fw.append(',');
     fw.append(reportBean.getBalance());
     fw.append(',');
     fw.append(reportBean.getCurrentValue());
     fw.append(',');
     fw.append(reportBean.getAccountNumber());
     fw.append(',');
     fw.append(reportBean.getColCRMSecId());
     fw.append(',');
     fw.append(reportBean.getIssueDt());
     fw.append(',');
     fw.append(reportBean.getMarturityDt());
     fw.append(',');
     fw.append(reportBean.getUnAdjSubSidy());
     fw.append(',');
     fw.append(reportBean.getGuarantorFacilityId());
     fw.append(',');
     fw.append(reportBean.getRatingAgency());
     fw.append(',');
     fw.append(reportBean.getExternalRating());
     fw.append(',');
     fw.append(reportBean.getExpDtOfRating());
     fw.append(',');
     fw.append(reportBean.getGuaranteeAmt());
     fw.append(',');
     fw.append('\n');
}

You don't seem to be writing anything to the response at all. Yes, you create a StringBuffer and write lots of stuff to the StringBuffer but then you do nothing else with that buffer.

Download from Interactive Report to csv is not working

Hi there,
when I try to create a download form my interactive report I get an empty csv/pdf.
I just checked with other report pages where the download functionality is working - but the settings seem the same.
In the interactive report properties I've set the check boxes for csv and pdf and it is also displayed properly then on the report page. But when I click on the download (csv or pdf) just an empty document is opened.
What settings can I check now - what might be the reason for the error?
BR & thank you,
Lena

Keerti,
You're using the "Display Condition" of the Interactive Report Region (IRR) to show the report or not.
If you have multiple selects just use a PL/SQL expression as in:
:P1_MULTI_1 IS NOT NULL
AND :P1_MULTI_2 IS NOT NULLNow, if that works for you lets take things a little further... You don't need the second submit button all the time (I'd get rid of it entirely but you seem to really want to hide the region until a selection is made). I did the following:
1. Updated the display condition of the report to use a PL/SQL expression.
2. Set the display condition of the submit button to the opposite of the IRR.
3. Added the item name of the select to the interactive report attributes > Advanced Attributes > Page Items to Submit.
Now the go button can be used for everything.
Regards,
Dan
http://danielmcghan.us
http://sourceforge.net/projects/tapigen
http://sourceforge.net/projects/plrecur
Edited by: Dan McGhan on May 14, 2009 12:28 PM
Updated as only clicking "go" works with Page Items to Submit.

Failed Receiver Determination on empty file

I have seen suggestions matching the solution I have tried, but it is not working in my scenario.
The scenario is an empty CSV file inbound to 3 receivers. In the standard receiver determination, I created a context condition for the 'SAP system' receiver, which uses RFC adapter. The condition is: 'Sourcefilesize not equal 0'. For an empty file, the 'SAP system' receiver should not be selected because it has mapping to the RFC structure. The other 2 receivers are SFTP and file, and the client requires they receive the empty input file.
I see the file size is captured in the dynamic configuration in the MONI:
namespace: XI/System/File.....name="Sourcefilesize">0<SAP:record...
The error is: Problem while determining receivers using interface mapping: Error while determining root tag of XML: BOM / charset detection failed.
The system is PI 7.1, the sender comm channel is Advantco with namespace override and content conversion. I have tried using file type 'binary' and type 'text', with UTF-8 encoding - results in the same error either way.
The file is coming from an external vendor - I do not believe they will make any changes to it, so hopefully this can be resolved in PI.
All suggestions are appreciated. Thank you.

Hareesh and Osman, thank you for your replies.
I should have pasted the entire message. When testing in the IB, it fails in receiver determination..
""Error when determining the receiver: Problem while determining receivers using interface mapping: Error while determining root tag of XML: BOM / charset detection failed Error while parsing an XML stream: 'BOM / charset detection failed&#39""
Only the SAP system RFC receiver has message mapping - the SFTP and file receivers do not. (I have changed only namespace and system names in screen below)
Receiver determination -
Interface Determination XXXX_D
Interface Determination Archive_D
Interface Determination SAP system

External table with empty file

Hi,
My db version: Oracle 11g
I have an empty csv file.
I created a external table for the empty csv file.
When I run:
select count(*) from externaltblname;
It returns 1.
It should return 0 right.
In the definition, I specified "SKIP 1"
But still it returns 1.
When I use this external table to load into a target table. It loads a single row with null values.
How to fix this. Please advice.

What works for me is the following (t_ext points to an empty csv):
SQL> select count(field) from t_ext;
COUNT(FIELD)
           1
1 row selected.
SQL> select ascii(field) from t_ext;
ASCII(FIELD)
          13
1 row selected.
SQL> select count(replace(field, chr(13))) from t_ext;
COUNT(REPLACE(FIELD,CHR(13)))
                            0
1 row selected.

PI2.0 - parameterized configuration via templates

Hello,
I tried tu use csv file import as a method to can provide mass rollouts with device individual parameters also.
Q1: is this possible in generall?
If I try this, I get an error message: "Empty csv file. Import From csv Failed"
The csv isnt empty, but maybe wrong formatted, because its an not documented feature.
Q2: What is the right format or in other words what is wrong in following csv? On which log-file at the ade# I have a chance to can catch the real cause?
poc-brtr-1,Munich-DC,Mark Mustermann,172.20.26.7,public,172.20.26.7
poc-brtr-2,Munich-Keller,Moni Musterfrau,172.20.26.7,public,172.20.26.7
poc-yrtr-1,Munich-DC,Mark Mustermann,172.20.26.7,public,172.20.26.7
poc-yrtr-2,Munich-Keller,Moni Musterfrau,172.20.26.7,public,172.20.26.7
poc-fw-sw1,Munich-DC,Mark Mustermann,172.20.26.7,public,172.20.26.7
poc-fw-sw2,Munich-Keller,Moni Musterfrau,172.20.26.7,public,172.20.26.7
poc-sw1,Munich-DC,Mark Mustermann,172.20.26.7,public,172.20.26.7
poc-sw2,Munich-Keller,Moni Musterfrau,172.20.26.7,public,172.20.26.7
poc-fw1,Munich-DC,Mark Mustermann,172.20.26.7,public,172.20.26.7
poc-fw2,Munich-Keller,Moni Musterfrau,172.20.26.7,public,172.20.26.7
poc-injector,Munich-DC,Mark Mustermann,172.20.26.7,public,172.20.26.7
The variables in the template are $device,$location,$contact,$trap1,$tc,$syslog1, the device name matches the name used in Prime Infrastructure exactly. Should I use Management IP addresses in place?
many thx for hints in advance, Steffen

The change events are syslog messages
Do you see syslog messages from the switches in the PI GUI?
You can configure a tcpdump to listen for syslogs on port upd 514.
That way you know if the switches have sent anything and from what source IP.
Cheers,
Michel

Autonomous to LWAPP AP upgrade tools 2.05 or 2.01

creates an empty CSV File. IE(no Ethernet MAC addresses, no certification type, and no public key hash values) any suggestions? Thanks KP

I attach my sample file for you. Please checl

How to test if a csv file is empty or not and email it?

Hi,
I am new to powershell scripting and i have a small task which is basically i have a csv file which will sometimes be empty(it will have header row even if its empty ) and sometimes it will have some rows of data.so basically i have to write a power shell
script which will look at the csv file and if its empty then do nothing if its not empty then email it to someone with the csv file attached to it?
Can someone please help me with it?
Thanks

Hi mike,
Yeah sure i will keep an eye on it ,and yeah coming back to your way of code.Here is the way i am doing it
If ((Import-Csv D:\App\ODS\File\Share\StoreTrafficException.csv).Count -gt 1)
       Send-MailMessage -To "[email protected]"
       -From "[email protected]"
       -Attachments D:\App\ODS\File\Share\StoreTrafficException.csv
       -Subject 'Check on this file'
       -SmtpServer "int-smtp1.jjill.com"
and if i run this one i get the following error :-
Missing expression after unary operator '-'.
At D:\App\Email.ps1:5 char:9
+        - <<<< Attachments D:\App\ODS\File\Share\StoreTrafficException.csv
    + CategoryInfo          : ParserError: (-:String) [], ParentContainsErrorRecordException
    + FullyQualifiedErrorId : MissingExpressionAfterOperator
And all the sendmail paramaters and values are correct because i am using the sameone in my other code which i said worked fine.Can you suggest me any changes on why its failing? Just want to know the reason and it would be great if i can have this way also.
Thanks

Reading .csv Files & Empty List Elements

I have an application allowing users to upload .csv files for
import into a database.
The issue is however, that in some cases every column in the
csv file will be populated, and in others, not.
As ColdFusion ignores empty list elements I cannot accurately
import data based on it's column numbers.
I'm curious how others get around this issue.

ckbentdesigns wrote:
> As ColdFusion ignores empty list elements
Yes, most list functions ignore empty elements. If you are
using CF8, try the listToArray function. It has a new attribute
includeEmptyElements.
Otherwise, there are several solutions. I listed a few of
them in this thread. Though there are others. You should google
something like:
ColdFusion csv Files Empty List Elements to see other
options and the +/- of each.
http://www.tek-tips.com/viewthread.cfm?qid=1490791&page=1

Open hub destination problem - .csv file is empty

Hi everyone,
I am trying to extract data from our BW system using Open Hub Dest. to a .csv file
DTP runs successfully means show total no. of records but when I see in AL11 then records are not in .csv file that is .csv file is empty.
How to figure out the problem?
Best regards
Ahmad

@Jagadeesh:
if I correctly understood you, you mean to say that first I should run DTP and save to an excel file to see if it shows data or not. This i think is not possible; as when we create OHD then 'Destination Type' we can choose among 'DB table', 'table' and 'third party tool',
so if I choose 'Table' then 'File Name' is .csv file (same name as the OHD) and can change it to .xls file
@Arun:
have permission to write in the folder
Do you mean creating OH to a Database Table?
in DTP I have a filter on a Characteristic, when its 1500 records then it works (data is in .csv file) but when 3500 records then .csv file is empty
no error message, no log
Regards
Ahmad

Set-ADUser based on .csv file - empty attributes issue

Hi, after a few months without working with PowerShell my knowledge is slowly fading away but fortunately every time this happened before, I was able to rebuild my knowledge again and now it is the same story. However I want to optimize my simple
code which populates three AD user object attributes: manager, officephone and fax with values stored in .csv file. Everything works well, but my code looks not so good in my opinion. Is there any more elegant solution?
$AddressBook = Import-CSV -Path D:\AddressBookFinal.csv
foreach($Employee in $AddressBook)
     if([string]::IsNullOrEmpty($Employee.ManagerUserName)) {
              Set-ADUser -Identity $Employee.EmployeeUserName -Manager $null
    } else {
              Set-ADUser -Identity $Employee.EmployeeUserName -Manager $Employee.ManagerUserName
    <#similar code here for checking value of OfficePhone and Fax attributes and populating AD attributes depending on if attribute value in .csv file is empty or not#>

Hi BoxiKG,
If there is any other question regarding this issue, please feel free to reply this post directly so we will be notified to follow it up.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

B12File empty CSV

Similar Messages

Maybe you are looking for