B560 connection with projector using long cable no display

Hello Guys ,
I am having a problem with projector connection shown in the picture below.I have tried other PCs there is no problem. This case only happening with B560. Until now I did bios update. Do you think that there is problem with intel HD graphics driver ? Any suggestion ?

hi OKR-MAN,
Thank you for your post, Its really uncertain at this point to understand what exactly is causing. But base on diagram and if i were to decide from first look i'd say you have a cable failure. But may i know what type of cable are you using specifically and are you connecting through VGA, HDMI or using any converters.
Do let me know and let me check this out for you.
regards

Similar Messages

Mini-HDMI to VGA does not work with projectors having long cables

Hi
I use a ThinkPad Yoga with Windows 8.1 and have problems to get a video signal to some projectors using a Mini-HDMI VGA adapter like this http://www.amazon.com/Cable-Matters-Active-Female-Adapter/dp/B00879ELGA/ref=sr_1_1?ie=UTF8&qid=13979...
Usually it works but in some lecture/presentation rooms projectors show "no signal" (I changed all possible graphic settings). There seems to be a problem with cable length because after using a VGA repeater increasing video signal strength projectors show a picture. But the problem is those VGA repeaters are quite expensive and too big (if you are travelling). Some Mini-HDMI VGA adapters have USB ports to connect them to a power source but this does not really help to increase signal strength.I find this issue very annoying because all other (older) laptops with VGA ports or MacBooks with displayport-VGA adapters do not have this problem and produce a video signal that is strong enough to connect to projectors with long cables.
My questions are:
a) Is it possible to adjust my ThinkPad hardware settings to improve signal strength?
b) If not, is there a small Mini-HDMI VGA adapter that produces a signal strong enough to connect projectors with long cables?
c) If not, is there an affordable and small VGA repeater that does the job?
Thanks!

1) that is not possible
2) Why not get a USB2VGA converter?
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft

I can no longer connect with others using FaceTime after the mandatory update

I updated my iPad software and now when I try to connect with someone using FaceTime I can never fully connect.
Can anyone help me or seen this issue?

Unable to make or receive FaceTime calls after April 16, 2014
http://support.apple.com/kb/TS5419
Using FaceTime http://support.apple.com/kb/ht4319
Troubleshooting FaceTime http://support.apple.com/kb/TS3367
The Complete Guide to FaceTime + iMessage: Setup, Use, and Troubleshooting
http://tinyurl.com/a7odey8
Troubleshooting FaceTime and iMessage activation
http://support.apple.com/kb/TS4268
iOS: FaceTime is 'Unable to verify email because it is in use'
http://support.apple.com/kb/TS3510
Using FaceTime and iMessage behind a firewall
http://support.apple.com/kb/HT4245
iOS: About Messages
http://support.apple.com/kb/HT3529
Set up iMessage
http://www.apple.com/ca/ios/messages/
iOS and OS X: Link your phone number and Apple ID for use with FaceTime and iMessage
http://support.apple.com/kb/HT5538
How to Set Up & Use iMessage on iPhone, iPad, & iPod touch with iOS
http://osxdaily.com/2011/10/18/set-up-imessage-on-iphone-ipad-ipod-touch-with-io s-5/
Set Up Alert Sounds
http://www.quepublishing.com/articles/article.aspx?p=1873027&seqNum=3
Extra FaceTime IDs
http://tinyurl.com/k683gr4
Troubleshooting Messages
http://support.apple.com/kb/TS2755
Troubleshooting iMessage Issues: Some Useful Tips You Should Try
http://www.igeeksblog.com/troubleshooting-imessage-issues/
Setting Up Multiple iOS Devices for iMessage and Facetime
http://macmost.com/setting-up-multiple-ios-devices-for-messages-and-facetime.htm l
FaceTime and iMessage not accepting Apple ID password
http://www.ilounge.com/index.php/articles/comments/facetime-and-imessage-not-acc epting-apple-id-password/
Fix Can’t Sign Into FaceTime or iMessage iOS 7
http://ipadtutr.com/fix-login-facetime-imessage-ios-7/
FaceTime, Game Center, Messages: Troubleshooting sign in issues
http://support.apple.com/kb/TS3970
Unable to use FaceTime and iMessage with my apple ID
https://discussions.apple.com/thread/4649373?tstart=90
iOS 7 allows you to block phone numbers or e-mail addresses from contacting you via the Phone, FaceTime, or Messages
http://howto.cnet.com/8301-11310_39-57602643-285/you-can-block-people-from-conta cting-you-on-ios-7/
How to Block Someone on FaceTime
http://www.ehow.com/how_10033185_block-someone-facetime.html
My Facetime Doesn't Ring
https://discussions.apple.com/message/19087457#19087457
How to watch FaceTime calls on the big screen with Apple TV
http://www.imore.com/daily-tip-ios-5-airplay-mirroring-facetime
Send an iMessage as a Text Message Instead with a Quick Tap & Hold
http://osxdaily.com/2012/11/18/send-imessage-as-text-message/
To send messages to non-Apple devices, check out the TextFree app https://itunes.apple.com/us/app/text-free-textfree-sms-real/id399355755?mt=8
How to Send SMS from iPad
http://www.iskysoft.com/apple-ipad/send-sms-from-ipad.html
How to Receive SMS Messages on an iPad
http://yourbusiness.azcentral.com/receive-sms-messages-ipad-16776.html
Apps for Texting http://appadvice.com/appguides/show/apps-for-texting
You can check the status of the FaceTime/iMessage servers at this link.
http://www.apple.com/support/systemstatus/
 Cheers, Tom

I have a ipad 2 and it does not connect with safari using 3G

I have a ipad 2 and it does not connect with safari using 3G

Sorry to hear you are having issues, but there are 2 ways you can print from that device.
The first one is to simply email photos or documents to your printers email address by attaching them to a new message.
The other option is to download the HP ePrint Home and Biz app from Google Play. The app is free and should allow you to print pictures and documents to the printer with ease. I have added a link below on how to get started with this app.
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
Jon-W
I work on behalf of HP
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS STAR on the left to say “Thanks” for helping!

Can I connect with Database using Session Bean

Hi,
I am new to EJB. I have small doubt.
can I connect with Database using Session Bean.
Regards,
Murali.

Double post of http://forum.java.sun.com/thread.jspa?threadID=687239&tstart=0

Is there any way to connect an ipad to a ethernet cord or connection with out using wi fi

Is there any way to connect an ipad to a ethernet cord or connect with out using wi fi? Thank you

The closest you can come, without having a 3G iPad is to have a cellular mobile hotspot like the Mifi or such device, use that to get to wifi, or to tether it to a cell phone.

Ethernet connection with labview using Modbus

I want to communicate via Ehternet connection with LabVIEW using modbus protocol, Just as RS232 (COM) coomunication wiht Modbus in Labview.
mini

See these threads.
http://forums.ni.com/ni/board/message?board.id=170&message.id=151337&view=by_date_ascending&page=1
http://sine.ni.com/apps/we/niepd_web_display.display_epd4?p_guid=F1582737BACF5CA8E0340003BA7CCD71&p_...

Connecting with projector

Hello! I hope someone can help me with the problem..
I am trying to connect my IMAC G5 with a video projector.
I have been doing this for years with i book G4, using video adaptor,
and it has always worked.
This time, however, when I connect the projector with my IMAC,
(the 17 inch) the resolution changes to 1024-640, thus the image on the screen
get "swollen"..
Even if I try to change the resolution in the system preference panel,
(Display window), it just doesn't work out; if I change it to 1670 resolution
as it should be, the image becomes "smaller" with a black frame around it.
(In this case, the swollen image gets slim as before.)
I had doubt that the video adaptor is not the right one.
(According to the guy in the computer shop in Turin, it is Mini-VGA
and it should work out OK likewise with Imac G5)
I tried with a computer adaptor, too, that came with Ibook, but it is the same.
The Mac technical assistance says that there is something wrong with my IMAC and I should take it to the repair.
Is it really only the solution? or is there something else that I can try?
Thank you grazie..
minobu

Hi, did you get this solved. We also you ProPresenter. I am not sure why you mirrored the screen to get a DVD to play? PP supports DVD playback (unless your using an older version that doesnt have this feature??). Or you can drag the DVD window to the projector display.
Did you deselect mirror image? because you wont have any arrangement options available, you wouldn’t need them.

Laptop/iPad connection to projector using Apple TV??

Hi all, just wondering is it possible to wirelessly mirror a laptop to a projector using Apple TV in the same way as it is now possible with iPad2?? Involved with an education centre so it would be very handy to cater for both laptop and iPad, depending on the equipment being used by a guest speaker.
Is this possible? Is there a better way than Apple TV?

Welcome to the Apple Community.
No that's not currently not possible via an Apple TV. You need to use a cable.

HT3728 every time my iMac sleeps or restarts it loses the connection to airport express and i must reset and connect with router via ethernet cable.

Every time my imac sleeps or restarts it loses the wireless connection with my airport express (used for streaming music). I then have to disconnect the airport express from my stereo, bring it to my router, connect it to my router with ethernet cable and reset the wireless connection. Even with my airport express in the same room as my router Airport Utility cannot find it until i plug in an ethernet cable, so i do not think this is an issue with my wireless network. Router is a newer netgear.

Hi there frustrated newbie 2014,
You may find the troubleshooting steps in the article below helpful.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.

WRT54G:can I connect 2 computers using different cables ?first computer

using straight cable and the second computer using crossover cable
thank you for your help
noam

I already have 2 PCs connected with straight cable and 1 PC using crossover and it works. I'm interested to know if someone thinks this can create problems.

SOLVED: Dropped connections with Time Capsule and cable modem/router

I've been dealing with random dropped connections for quite a while and I thought that it would be useful to share what I've found.
I was having a very puzzling problem where my internet connection would drop randomly on wireless devices. On my laptop, webpages would suddenly become unresponsive for a minute or two, Mail would have connection problems and complain, etc...but incredibly randomly and definitely not repeatable or in any pattern that I noticed.
I also have 2 Nest thermostats in the house which connect via wi-fi. I noticed that they would randomly show Offline very often when viewed from a webpage or iPhone app, but the Nest front panels showed that they were connected with a strong signal.
As I said, the dropped connections were very sporadic. Most of the time, everything worked, but every once in a while...bam.
I worked with the level 3 tech support guys at Nest for over a week to figure out what was going on. We went through settings on my router and Time Capsule and everything seemed proper and okay. I even replaced the Nests with new ones but still had the same problem. We were all completely stumped.
Yesterday, my laptop dropped it's connection at the same time my wife's laptop dropped hers. At this point, I wondered if something was wrong with the Time Capsule or maybe my internet provider.
I called AppleCare to see if they could help with debugging the problem. They passed me up to a senior wi-fi tech and he asked me many questions about the configuration of my network. My home network looked like this yesterday (see crappy diagram below)
                                                     Motorola Cable modem/router
                                                                             |
                                                       Netgear multiport switch
                                                      |          |         |         |          |
                                                     hardwired Macs,            TimeCapsule (bridge mode)
                                                     laser printers,                   |   |   |   |   |
                                                      Apple TVs                       laptops, Nest, iphones
This configuration seemed correct to me. The Time Capsule in bridge mode would mean that the cable modem/router would be handling DHCP so all the devices would be on the same network and I could print from a laptop to one of my printers and the laptops could connect to the hardwired Macs, etc..
The AppleCare technician said he thought that bridge mode was the problem. He mentioned that there was a known issue that in this configuration, the IP addresses could get lost between the cable modem/router and the Time Capsule. He said it would be best if the Time Capsule was in DHCP/NAT mode and the first device before the switch, this way the Time Capsule was the only device passing out IP addresses.
So I repatched my network like this:
                                                   Motorola Cable modem/router
                                                                             |
                                                   TimeCapsule (DHCP/NAT mode)
                                                            |                                       |   |   |   |   |
                                    Netgear multipart switch                      laptops, Nest, iphones
                                         |         |         |        |
                                           hardwired Macs,
                                             laser printers,
                                               Apple TVs
I can tell you that in the past 24 hours, I haven't seen anything lose a connection. Not even the Nests which seemed be on and off all the time. And, in this configuration, all the devices are on the same network and able to speak to each other.
I hope that helps someone.

So you're saying that Bridge Mode not functioning properly is a well known issue?
Not to me.. I have not had issues with the TC in bridge. And it is my prefered setup. I think it is better as a wireless AP and network hard disk than a router any day of the week.. but there are other ways to skin the cat if it is proving unreliable. I am at the moment using a wireless bridge from the Gen4 TC to a Gen4 AE upstairs for TV internet streaming.. it started off very reliable.. but of late I guess I need to reboot it every few days. And it has required a full reset two or three times.. although I probably need to take some of the blame for those. I am not over worried.. i do not believe in wireless bridges except for the most interim of arrangements.. it will be wired in ethernet ASAP.
Wireless should always be used in a way that respects its status as voodoo.. not stable technology. NOT SCIENCE.. it is more a bag of beads and rattles.
Is there a way to change the cable modem/router to avoid the double NAT problem?
The answer to this may depend on your ISP. Did they provide the modem? If so they may lock it down so you have no control. But normally a Motorola cable modem will not have a bridge mode as such but will have a method of turning off NAT.. (and wireless).. this amounts to the same thing.
Once you turn off NAT.. you need to power cycle the modem so the TC gets the public IP in router mode. The power cycle time might be 5min or 20min or overnight.. it again depends on your ISP.. but you need to stop the modem capturing the public IP so it can be passed to the modem.
Depending on where you are in the world.. US is most concentration of cable network.. you can go out and buy your own modem. Pick one on your ISP list and steer clear of SB.. at least with the apple routers they are problematic.
It also can be a case that the cable modem is SB model and therefore more problematic. Sorry I have forgotten the recommendation for what to buy. There are a number of posts here about it but search is terrible now. (or I am too old to figure it out). I will get Bob to poke his nose in and tell you what works for him.

How to manage a connection with powershell using visual studio with C#

Hi
I want to manage a connection with powershell for a web app using visual studio with c#. and also run command with pipeline
Plz give a some suggestions..

Hi Raj_Kumar_Saini,
To make things clear, could you please clarify these thing?
1. Do you mean you want to execute some PowerShell scripts from C# language? These blogposts may give you some ideas:
Executing PowerShell scripts from C#
Powershell Automation and Remoting (a c# love story)
Execute PowerShell from a ASP.NET Web Application
2. Is your question related to Visual Studio Integration? Do you want to build a Visual Studio Extension?
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I can not connect to projector using Thunderbolt to VGA adapter

When booting on Windows 7 using Boot Camp I am not able to connect to projector. I have a Thunderbolt to VGA adapter. It works fine when booting on Mac OS. Do i need to update any drivers or am i using wrong adapter? I have Boot Camp version 4.0.

If this is you home wifi try resetting the router. Turn if off at the wall wait a minute and turn it back on. Are you sure you have the right password?

Though I have connected my receiver using thunderbolt cable/hdmi it does not emit sound, but i can see the display

My imac does not detect the thunderbolt. so cannot select external speakers though I have connected the mac using thunderbolt to hdmi. cannot receive sound but video is seen.

I have one thunderbolt port and one mini display port.
No Mac has both Thunderbolt and Mini DisplayPort. They are both Thunderbolt. A Mini Disp;layPort cable or adapter will work in a Mini DisplayPort or Thunderbolt port.
A Mini DisplayPort to HDMI cable or adapter can handle both audio and video, but some older ones are video only.
You may have a broken audio wire in your cable. Try a new cable or Mini DisplayPort to HDMI adapter. Make sure it says it will handle both audio and video.

B560 connection with projector using long cable no display

Similar Messages

Maybe you are looking for