HT3728 every time my iMac sleeps or restarts it loses the connection to airport express and i must reset and connect with router via ethernet cable.
Every time my imac sleeps or restarts it loses the wireless connection with my airport express (used for streaming music). I then have to disconnect the airport express from my stereo, bring it to my router, connect it to my router with ethernet cable and reset the wireless connection. Even with my airport express in the same room as my router Airport Utility cannot find it until i plug in an ethernet cable, so i do not think this is an issue with my wireless network. Router is a newer netgear.
Hi there frustrated newbie 2014,
You may find the troubleshooting steps in the article below helpful.
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628
-Griff W.
Similar Messages
-
Every time I sync my iPhone 4 I lose the password to my GFs wifi network.
then i have to retype it next time i want to use it. I already changed the security for it to WEP. How do I fix this? It's giving me the sh*ts
thanks,
zacCheck the router settings to see if it is hiding the SSID, that can cause this. If this is the case, you can un-hide the SSID since hiding it is really doesn't accomplish much (e.g. there are free apps that show hidden networks). Also, you might consider using WPA2 rather than WEP, it is much stronger encryption than WEP.
-
Connecting time capsule to wireless modem router via ethernet cable
Hi
I use my TC to store all my data and itunes music/media. I've noticed that when purchasing music, the download speeds are quite slow, even though when I test the broadband speed, it's at a reletively ok 5 mbps. If I hard wire the tc to the modem router, will the downloads be faster? If so, how do I connect them up with ethernet cable. I've done so, and nothing seems to appearing on my desktop.
cheers
Mark.Reset the TC to factory settings. This will allow you to reconfigure the TC to use Ethernet.
-
printer connected to airport express...shows up and prints on iMac but the printer doesn't show up on my ipad 2 when I try to print. What am I missing, please?
Take a look at Printopia to see if it will do what you want.
There is a free trial, so you will know if it works before you buy. More info:
Printopia - Ecamm Network -
I have an iMac OS 10.9.5 - Every time I turn on my system I get the message that it can not access icloud and to fix it using iCloud preferences. I do not want to access or use iCloud, how do I get the message to discontinue?
Hello mrmacjohn,
Verifying that any iCloud account that may be signed in is signed out should resolve this error.
On your Mac, open iCloud preferences, then click Sign Out.
iCloud: Change iCloud feature settings
http://support.apple.com/kb/PH2613
Cheers,
Allen -
I transferred files and photos from MacBook to iMac via ethernet cable and using migration assistant. However every time I transferred, it created a separate user and it transferred all files and photos again and again. So now I have 3 users accounts with all files and photos saved 3 times on same iMac !! Any idea how to avoid this ?
Yes, you ran into a very understandable problem.
When you use Migration Assistant, it cannot over-write the account that you happen to be using at the time. Upon migrating accounts, it will tell you that it is going to create a new one, but that message is easy to miss.
If you have three identical accounts, log in to the account you want to keep, and delete the redundant ones in System Preferences > Users & Groups.
Now that you know, the easiest way to migrate accounts is to use Setup Assistant when you first get a new Mac. That eliminates any possibility for this to occur, but most people are so eager to use their new Mac that they elect to migrate later.
That's OK too, but in that case you would want to create a temporary account whose sole purpose is to run Migration Assistant so that you may migrate your old one with an identical name. Be sure to give the new account Administrator privileges. When that finishes you would log in to the newly migrated account, and delete the temporary account. -
Every time I click print in Pages I get the beach ball and my mac freezes.
I just updated to the newest version of pages and every time I click print in pages I get the beach ball and my mac freezes. Any suggestions on fixing this? I've tried shutting down and restarting several times...nothing seems to be working and I'm loosing/wasting time trying to fix this...
Hey there nmiller0528,
It sounds like you are unable to print from Pages at all from your computer. I want to recommend troublehsooting the Mac OS for print issues with this article named:
Troubleshooting printer issues in OS X
http://support.apple.com/kb/TS3147
Follow these steps until the issue is addressed:
Make sure that the printer is powered on, has ink / toner, and that there are no alerts on the printer’s control panel. Note: If you cannot clear an alert on the printer's control panel, stop here and check the printer's documentation or contact the manufacturer for support.
Ensure the printer is properly connected to a USB port on the Mac or AirPort base station / Time Capsule. If the printer is a network-capable printer, make sure that it is properly connected to your home network.
Use Software Update to find and install the latest available updates. If an update is installed, see if the issue persists.
Open the Print & Scan pane or Print & Fax (Snow Leopard) pane in System Preferences.
Delete the affected printer, then add the printer again.
If the issue persists, try these additional steps:
Reset the printing system, then add the printer again.
If the issue still persists, reset the printing system again. Download and install your printer's drivers. Then, add the printer again.
Contact the printer vendor or visit their website for further assistance.
Thank you for using Apple Support Communities.
Take care,
Sterling -
Every time i send a txt msg it disappears the person gets my msg and i can receive theres but it just wont show my txt i sent it appears after i restart my phone but then when i send a new message it does the same thing again
Settings-messages-send & receive.
Select the phone number or email that the device uses to send messages. -
Every time i start my MacBook Air i get the spinning wheel and have to soft boot (shift, control, option, power) it three or four time s before it starts. It has only been over the last week or so I also found Safari will not load up and tyou have too open then shut from the drop down then restart it to get a page, any help pleas?
Do this:
Reinstall Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
after the chime press and hold down the OPTION key until the boot manager screen appears.
Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
Repair the Hard Drive and Permissions as follows.
After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
Reinstall Lion/Mountain Lion, Mavericks: Reboot from the Recovery HD. Select Reinstall
Lion/Mountain Lion, Mavericks from the Utilities menu, and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
three times faster than wireless. -
every time i go to write something it stops, the circle goes round and then it starts writing, does my mac need servicing or what is going on
What model of iMac do you have?
How much memory is installed?
What version of Mac OS X are you running?
When did the issue start occurring?
Did you recently install any software updates or new software that coincide with the onset of the issue?
Your post contains very little information to work with, but here's what I would do if it were my system.
First check the status of your hard driveby launching the Disk Utility application that is located in the Applications/Utilities folder. Click on the Verify Disk option and observe whether it reports any major errors. You can also boot from the Install DVD that came with your system by holding down the 'c' key and then pulling down the Utilities menu bar item to select Disk Utility. Either way will work. If the disk checks out OK then click on the Repair Permissions option.
To get a more detailed picture of the SMART status (hard drive error logging) you can use an application like SMART Utility which can be downloaded here. Obviously downloading a new application could be a problem if you're system is 'hanging' whenever you try to write something, so this may not be an option.
http://www.volitans-software.com/smart_utility.php
If you find any significant errors, make sure you back up your data if you haven't already done so. If there aren't any significant errors then go into the System Preferences and click on Users & Groups. Try creating a new user account and then log into it to see if you have the same issues. Creating a new user for test purposes will help confirm whether you are dealing with some sort of software issue.
If a new user account resolves the issue then open the Activity Monitor application located in the Applications/Utiliteis folders and click on the CPU button. In the lower left corner you should see a summary listing the % User, % System, % Idle. What are these percentages? If the CPU idle percentage is near zero then you have a process running that is consuming your SPU time. To try and find it pull down the menu to select 'All Processes', then click on the %CPU column to sort by the percent that each process is consuming your CPU. The numbers constantly change, but do your best to see if there are one or two processes consuming the majority of the CPU time and post the names. Then do the same test in the new user account. I suspect you may have some process from a previously installed utility, virus checker, etc. that is keeping your system busy. I've included a screenshot from my system below. It doesn't have much going on, and as you can see in the lower left corner the CPU is basically idle most of the time. If I were to launch a CPU intensive app the numbers would change dramatically. -
My iPhone is skipping back to the start of a song every time I unlock it, especially when I am replying to a text message, this is very frustrating and just want to know if it is a simple bug that will be dealt with in the next update?
Assuming the phone isn't jailbroken, the basic steps (as needed) are:
Restart phone (you already did this)
Reset phone
Restore phone in iTunes using a backup
Restore in iTunes as new, without using a backup
See appendix B of the User Guide for details
http://manuals.info.apple.com/en_US/iPhone_iOS4_User_Guide.pdf
If your phone is jailbroken, this is the most frequent cause of the problems you described. Restoring could permanently brick the phone.
Note that your iOS is old and the current version is 4.2.8. It's odd that it wasn't updated when your activated your phone in iTunes, being that you got it last Friday. -
Every time I charge my iPhone 5 it loses signal
Every time I charge my iPhone 5 it loses signal
That seems very strange although it might be due to some kind of mains interference. When recharging it, try extending the cable, as far it will let you, away from the power source and see if this improves things.
Also, it is always worth trying a reset,
Reset your iPhone by pressing the 'Sleep' and 'Home' button at the same time for about 15 seconds or so. Your iPhone will then go through a reset / reboot procedure and will be ready for use within about a minute.
Don't worry about doing this as you will not lose data or settings.
Good luck and do report back. -
my windows(8.1 64bit) partition is read only from the mac(yosemite) side of things. Anybody have a clue on how to fix this? Also, slightly frustrating as well, windows crashes every time I attempt to open a file from the mac partition.
All Office applications will also try to open a temporary work file in the same location as the source file. This implies the source file directory also needs to be writable for this temporary file. Since the default HFS+ driver provides only read-only access, such temporary files will fail to open, and will cause the application to fail.
As a test copy the file you want to edit, say an Excel spreadsheet from the OSX file system to the C: drive on the Windows side and try to open it. If you look in this directory, you should see two files, the source and a temporary file. You may have to force the temporary file to be opened on a read-write file system, by manipulating the folder for temporary files. -
Every time i try to open itunes i get the 'Itunes Setup Assistant'
Every time i try to open itunes i get the 'Itunes Setup Assistant' even though i have already installed and configured itunes. And after exiting this i get onto itunes but all of my music is GONE. (even though i know i can always import it back) But this means that whenever i want to use itunes i have to configure it and import all of my tunes again which takes ageees. The, as soon as i go to open it again i have to repeat the whole process!!! By the way, i have already tried re-installing itunes and every other apple device completely on my computer, but nothing is working!!! ANY HELP WILL BE MASSIVELY APPRECIATED!!! Ps. this only just started happening a week or so ago.
This just started happening to me last week also. After I went through the setup process I could get into my itunes but would get a msg about library not being saved due to user not being an administrator. I went into my program files opened the itunes folder right clicked on the itunes music folder and clicked on "Run as administrator". I haven't had a problem
since. Don't know if this will work for you but I guess it won't hurt. good luck. -
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.06-sep-2012 0:14
Me compre un ipod classic de 160gb cada vez que trato de ponerle musica de mi disco duro externo solo copia hasta 1500 canciones y luego me congela el Itune y no lo puedo cerrar, me pide que restaure el ipod como de fabrica, lo hago y nada. Trato de cerrar el programa de itune y no me deja, trato de apagar el computador y no lo puedo apagar, he buscado para ver si tiene errores el disco del Ipod y me dice que esta bien. Lo he restaurado como 8 veces y le he puesto musica y videos pero siempre me borra todo. He aplastado Menu y Seleccion para entrar al sistemade diagnostic o del ipod y le pongo el test manual donde entro al IO y me dice q todo esta bien. Le he dado ya varios Format directamente desde el Windows 7 y nada tampoco, siempre me borra todo desde que pasan mas de 1300 canciones y me congeal todo el equipo. Ya no se que pensar de esta compania Apple porque no da ninguna solucion ha este tema.
I bought a 160gb iPod classic every time I try to put music on my external hard drive only copy up to 1500 songs and then freezes Itune me and I can not close, asks me to restore the ipod as factory, and do nothing . I try to close the program and itune will not let me, I try to turn off the computer and I can not shut, I looked to see if the iPod disk errors and says it's okay. I restored it about 8 times and I've put music and videos but I always delete everything. I crushed and Selection Menu to enter diagnostic sistemade or ipod and I put the manual test where I enter the IO and q tells me everything is fine. I have already given several Format directly from the Windows 7 and anything either, I always delete everything from passing over 1300 songs and I congeal whole team. No longer have to think of this company because Apple gives no solution has this issue.
iPod classic, Windows 7, ME BORRA TODO Y SE CONGELA
Maybe you are looking for
-
Java Error when Clicking on Notification
Hi, Appreciate if any one can help to resolve this issue. in the Notification , when i click on the Notification i got the following error. I think the error occurs cause of the *"SQL error during statement preparation"* which is the Part with Bold F
-
Directly launch the object if only one result is found (SEARCH_AUTONAV )
Hi All We are on CRM 7.0 EP1, and I read an article in CRMEXPERT that one of the improvements in CRM 7.0 would be to jump to the object directly if only one result is found. For example, if I know the sales order number I can open it directly by pu
-
When Burning IDVD hangs at Encoding Audio
I have a 2 GHz PowerPC G5 iMac 1.5 GB DDR SDRAM SuperDrive - Double Layer dvds This is my first time using IDVD - I have a 2 hour movie that I am trying to burn. It hangs and gives me the multicolored wheel when it is trying to encode the music durin
-
Migrating 11gR1 DB to Another Server, but at 11gR2?
Hello - I'm running REL 5.3 Linux on both the source and target servers. My source DB is at 11g R1, and I want to migrate it to the new REL 5.3 Linux box, but have it be at version 11g R2. Can I take an RMAN backup of the source DB, and restore it to
-
Problems with J2ME and JAX-RPC
Hi, I am trying to write a J2ME web service client. I have generated the stub classes with wscompile from the wsdl document at http://www.webservicex.net/stockquote.asmx?WSDL. However, when I try to run the MIDlet I always get the following error mes