[B85-G43 GAMING] UEFI BIOS [E7816IMS.Cxx]

E7816IMS.C40 ===> E7816IMS.C54
Changes:
01. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
02. Fix Intel (R) Rapid Start Technology function fail.
03. DMI Link ASPM default to disable.
04. Add TseDefaultBootOrder module 4.6.4.1_DefBootOrder_1.3
         a. Fix FixedBootOrder change boot option priorities issue.
05. Fix WHQL test PC Resume fail.
06. Fix some DMI string writeonce issue.
07. Change solution about associate item SATA Hot-Plug and External Sata.
08. Fix Serial(COM) Port1 Settings error.
09. Update MsiOc - SharkBay module to MsiOc_SharkBay_m175
& Update MsiOc SharkBay Private Module m177
         a. Patch XTU can't set BCLK ratio issue.
         b. Fix DRAM Timing setting not be apply issue when install two memory on channel B and set
         timing save exit then change one memory to channel A.
         c. Add new token to control OC page spec.
         d. Modify EIST item and Turbo Mode item related code in OC page.
         e. Move Core Ratio Limit item to OC main Page and modify related code.
         f. Add CPU Ratio Apply Mode item and related code.
         g. Modify OC Genie Gear 2 setting for 9 series model and modify OC Genie enabled message.
         h. Support multi step option select mode for Memory Try It ! function.
         i. Move some function struct define and table define to new file.
         j. Fix Haswell Refresh CPU GT ratio can't set back to default issue when set GT ratio
         above default GT ratio and then enter setup change ratio to Auto.
10. Remove XHCI USB Mapping patch code.
11. Fix can't boot to OS after enter boot menu without choose any option.
01. Update code base to 4.6.5.4_VEB_1AQQW036.
02. Update MsiOc SharkBay Module m180
& Update MsiOc SharkBay Private Module m183
a. Fix sometimes CPU Base Clock not be apply issue when CPU Base Clock set to 125.03MHz.
b. Modify Extreme OC Config item string to Extreme OC Setup and modify option string.
c. Fix some coding define error.
d. Patch system sometimes always reset at POST issue when run memory fast boot.
e. Add auto adjust voltage related code when set CPU Base Clock over 175MHz.
f. Modfiy current VREF voltage dispaly function code.
g. Fix system unstable issue when use Corsair CMD16GX3M4A2666C11 memory and set XMP to
enabled and modify auto adjust voltage code for 7914.
h. Fix system unstable issue when use Team Vulcan-2133 memory and set XMP to enabled.
03. Fixed Display shows only 16bits of color when install NV Graphic card that VBIOS
support Optimus and set primary video adapter to IGD to Boot up with IGD output.
04. Resume PC Resume fail solution.
05. Fix M-Flash Boot/Recovery Issue.
06. Patch setup select Save & Exit random hang.
   07. Patch WHQL win7 test BitLocker Drive Encryption USB BIOS Logo test fail.
   08. Update MSI_XTU_SharkBay_m118.
& MSI_XTU_SharkBay_Private_m125.
01. Update CPU MicroCode - M32306C3_00000019(Intel(R) Haswell Processor C-0).
02. Fix system hang with POST code A2 when using WD 4TB WD40EZRX-00SPEB0 with exFAT format.
03. Enable the control of Active State Power Management on SA side of the DMI Link.
04. Fix boot menu function(F11) still detected IPV4 and IPV6 when enable Network stack and
then disbale Onboard LAN Controller.
1.switch to support dual microcode function in Project for Christopher's media
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

Similar Messages

[Z87-G43 GAMING] UEFI Bios Versions [E7816IMS.Axx Versions]

E7816IMS.A30 ===> E7816IMS.A42
Latest as of 02/12/2014
VGA BIOS : 2179
GOP       : 5.0.1036
ME Version    : 9.0.30.1482
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom : 2.1.1.5(UEFI v1.1.0.4)
Device OptionRom : N/A
Change Log:
   Update code base form 4.6.5.4_VEB_1AQQW034_m025a
01. Update MsiOc - SharkBay module to MsiOc_SharkBay_m169
     & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m172
a.Modify auto adjust VCCIN voltage code for 9 series model.
b.Modify auto adjust CPU Vdroop Offset Control code.
c.Modify DRAM Frequency item code to avoid display two DRAM Frequency item problem.
d.Remove the force one DIMM per channel related code from MRC.
e.Modify the DRAM Frequency and BCLK setting when XMP speed greater than 3000MHz when use
non K sku CPU.
f.Fix BCLK setting not be apply issue when use XMP 3000MHz memory and XMP is enabled and
boot on clear CMOS state
g.Fix XMP timing incorrect issue when use XMP 3000MHz memory and BCLK is 102.30MHz and
DRAM Frequency is 2933MHz.
h.Fix current CPU Ratio incorrect issue when OC Genie started by OC Genie Button at BIOS
first boot.
i.Modify Apacer 4GB PC3-24000 memory patch solution.
j.Add code to adjust ISL6388 PWM setting when over voltage.
k.Support DRAM Phase Control item and DRAM Switching Frequency item for 7888.
l.Correct token to change OC Genie GT voltage setting.
m.Remove extra % symbol from percentage options.
   02. Update IR3563A module to IR3563A_m112
a.Add multi language help string.
b.Remove extra % symbol from percentage options.
   03. Update uP1649 module to uP1649_m109
a.Add multi language help string.
b.Remove extra % symbol from percentage options.
04.Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m081
a.Fix press BackSpace is not active when edit item.
   05.Update OSSelect module to OSSelect_m023
a.Win7 device manager shows error message"!"on the 2nd VGA card
     "This device cannot find enough free resources that it can use. (Code 12)"
   06.Update OemInt15 module to OemInt15_m007
   07.Fix s5 auto wake up when enabled 'resume By onbaord lan'
   08.Remove useless SLI test key
   09.Fix UUID DMI imformation reverse
Update code base form 4.6.5.4_VEB_1AQQW034_m025
01. Update code base to 4.6.5.4_VEB_1AQQW034
02. Update MsiOc - SharkBay module to MsiOc_SharkBay_m168
     & MsiOc - SharkBay Private module to MsiOc_SharkBay_Private_m171
a. Modify the DRAM Frequency and BCLK setting when XMP speed greater than 3000MHz.
b. Fix system can't boot issue when use Haswell ES2 B0 stepping CPU.
c. Add OC Genie DRAM Voltage related code for use NCT3933 model.
d. Add token to change OC Genie GT voltage setting.
e. Fix OC Genie power limit setting incorrect issue after reboot system.
f. Add code to turn off OC Genie Button LED when disable OC Genie by BIOS OC Genie item.
g. Display VT-D item in CPU Features group when chipset supported.
h. Update private file to SharkBay Codebase 031 Intel RC 1.7.0.
03. Update MSI GSEII module to 4.6.2_TSE_2_15_1236_m080
& MGSE - ClickBIOSUI module to ClickBIOSUI_m018
a. Fix HotKey F8/F9 support load/save profile from romhole.
b. Add load profile when clear cmos or OC fail.
c. Fix "Full Screen Logo Display" item can't be changed when clear CMOS.
04. Update Aptio NCB/ROM Hole module to Aptio NCB ROM Hole_m128
a. Fix HotKey F8/F9 support load/save profile from romhole.
b. Support load profile when clear cmos or OC fail.
05. Update GBI module to GBI_m021
a. skip onboard VIA HUB 0x2109
06. Update PostMsg Module to PostMsg_m106
     a. Support load profile when clear cmos or OC fail.
07. Update HardwareMonitor module to HardwareMonitor_m030
a. modularize Hardware SD file and uni
08. Update uP1649 module to uP1649_m108
a. Patch minimum load issue when resume from S3 (only for 7887).
09. Update FITC module to FITC_ME9_1.5M_1482_m013
a. Update ME to v9.0.30.1482
10. Update Powerloss module to Powerloss_m108
a. Update string for Russian.
11. Update MSI_TCG module to 4.6.4.0_TCG_42_m007
a. Update to new nersion TCG_42.
12. Update VBIOS 2179 & GOP Driver 5.0.1036
13. Fix RocketRaid 2310 and RocketRaid 620 raid card,the Legacy mode install OS fail.
14. Patch muti-bom "DMI Information" error.
15. Fix the OC_switch LED will be power on under S5 state.
(when HW OC_GENIE button is enable and OC Genie Function Control is set to "By BIOS Options".)
16. Add VGA GOP information for AP
17. Update NCT3933 module NCT3933_m104
a. Support DRAM PCH VREF PLX voltage item code for intel 9 series chipset model CrescentBay platform.
18. Fix DMI type0 16M SPI ROM "BIOS ROM Size" show 8192KB
This is a BETA bios. It's use is done solely at your risk!
Flash Method:
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Once the flash is complete, you must download and install the latest ME drivers.
http://www.msi.com/product/mb/Z87-G43-GAMING.html#download

E7816IMS.A40 ===> E7816IMS.A51
VGA BIOS : 2179
GOP       : 5.0.1036
ME Version    : 9.0.30.1482
RAID ROM    : 12.8.0.1016 PV(12.7.0.1936)
LAN OptionRom : 2.1.1.5(UEFI v1.1.0.4)
Change Log:
         01. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
02. Fix Intel (R) Rapid Start Technology function fail.
03. DMI Link ASPM default to disable.
04. Add TseDefaultBootOrder module 4.6.4.1_DefBootOrder_1.3
            a. Fix FixedBootOrder change boot option priorities issue.
05. Fix WHQL test PC Resume fail.
06. Fix some DMI string writeonce issue.
07. Change solution about associate item SATA Hot-Plug and External Sata.
08. Fix Serial(COM) Port1 Settings error.
09. Update MsiOc - SharkBay module to MsiOc_SharkBay_m175
& Update MsiOc SharkBay Private Module m177
            a. Patch XTU can't set BCLK ratio issue.
            b. Fix DRAM Timing setting not be apply issue when install two memory on channel B and set
            timing save exit then change one memory to channel A.
            c. Add new token to control OC page spec.
            d. Modify EIST item and Turbo Mode item related code in OC page.
            e. Move Core Ratio Limit item to OC main Page and modify related code.
            f. Add CPU Ratio Apply Mode item and related code.
            g. Modify OC Genie Gear 2 setting for 9 series model and modify OC Genie enabled message.
            h. Support multi step option select mode for Memory Try It ! function.
            i. Move some function struct define and table define to new file.
            j. Fix Haswell Refresh CPU GT ratio can't set back to default issue when set GT ratio
            above default GT ratio and then enter setup change ratio to Auto.
10. Remove XHCI USB Mapping patch code.
11. Fix can't boot to OS after enter boot menu without choose any option.
This is a BETA bios. It's use is done solely at your risk!
Flash Method:
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.
2.) Extract the attached files and place the bios file onto a fat32 formatted USB stick and use M-FLASH.
Once the flash is complete, you must download and install the latest ME drivers.
http://www.msi.com/product/mb/Z87-G43-GAMING.html#download

MSI B85-G43 Gaming Bios

HI, I don't see any file related to MSI B85-G43 Gaming Bios, I would like to update ME....

E7816IMS.C33 is the latest Beta
>>Use the MSI HQ Forum USB flasher<<
Mode 1 pointed at the archive
Or extract the files to a dos bootable usb and run the bat file manually.

B85-G43 Gaming A2 boot error when connecting 3 disk drive

my spec
core i5 4570
MSI b85 G43 gaming
apacer 4x2 GB ram
msi gtx 650 ti boost
1 samsung 840 EVO 128 GB SSD
1 x 2 WD Blue Hdd
1 sata dvdrw drive
Win 7 64 bit
here is my problem. whenever i connect one of my WD blue hdd this A2 code always come out.
already tried changing my cable, updating my bios to latest version (C7) it didn't work. so anyone here, please help me.

Quote from: david.chandra.73 on 17-October-14, 20:08:25
latest BIOS from MSI 12.7 and by the way, i've upgraded my PSU to Seasonic X-series 660w from Super Flower SF500P12A 500w. and this problem still exist
oki, thanks
Quote
1 x 2 WD Blue Hdd
can you please tell the exact models?

MSI B85-G43 gaming mobo

Hello, could someone tell what drivers i need to download for this motherboard?

All listed in download section on product site for your OS: http://www.msi.com/support/mb/B85-G43-GAMING.html#down-driver

MSI B85-G43 GAMING. Almost without audio

Hi guys !
I just bought a motherboard model B85-G43 GAMING. And I almost have no audio =(
I tried:
- Install the driver that came with the CD;
- Downloaded and installed the latest driver from the MSI website;
- Downloaded and installed drivers from realtek website.
Nothing works... I'm desperate ! I can't find a solution... PLEASE, if anyone could give me a hands up.
Really appreciate !

Quote
What would exactly be "RMA the mobo"?
it means to send the board back to reseller or msi for repair/replacement
Quote
I just bought a motherboard model B85-G43 GAMING. And I almost have no audio =(
almost no audio is indeed very informative
Quote
And It's not exactly "without audio", there is audio it's just veeeery low..
you should tell this before
Quote
Nothing works... I'm desperate ! I can't find a solution... PLEASE, if anyone could give me a hands up.
have you done a new fresh OS installation after you got this new mainboard? [B85-G43 GAMING]
Quote
there is audio it's just veeeery low..
have you checked mixer settings, volume control?
what audio you've played? maybe the volume is low from the player?
have you tried to re-plug the speakers jacks to ensure its filled all the way to the audio ports?
have you tried a different speakers set?

MSI B85 G43 Gaming slow downloadspeeds

I've got the B85 G43 mobo, with the Killer E2205 Gigabit LAN controller.
I've tested my connection 5 times with Speedtest, and barely got 10Mbit up & 10Mbit down. I then tested it from the same site, same room, same cable even, on an older PC, and the results were higher.
When I check the speed in Network Center it says 10Mbit on the new PC, and 1Gbit on the 7 year old PC.
What I've already tried;
- Reinstalling drivers official site
- Disabling everything with 'Killer' in its name from startup & services
- This tutorial
- This tutorial to turn it into a Qualcomm
Getting lost here, I've had a lot of hope but download speed always stays the same. Atm I'm downloading BF4 but at a whopping 1MB/s, that takes about 10 hours, really sad. On my old PC I'd get 5 MB/s or even 8 MB/s, which is perfectly acceptable.

Quote from: redangel745 on 11-February-15, 01:36:24
I'm now using these drivers, together with forcing it to run at Full Duplex 100Mbit. And it works!
I also bought a new switch, just to be certain. The previous Switch supported 10/100 Mbit, this one 10/100/1000 Mbit. My speed has gone x 10 though, thanks to the drivers (I think)
Quote
I also bought a new switch, just to be certain. The previous Switch supported 10/100 Mbit, this one 10/100/1000 Mbit. My speed has gone x 10 though, thanks to the drivers (I think)
why not 1000 then, but 100?
your cable is the issue now?

[Z77A-GD45 GAMING] UEFI Bios Releases [E77525.Hxx]

E7752.H00 Release Bios
01.Switch to PLL mode for clock buffer.
This is a Released Bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<<Intel Management Engine Driver>>>
Please note that flashing this release occurs entirely at your own risk!

E7752.H00 ===> E7752IMS.H11 BETA BIOS
Me Firmware: 8.1.20.1336 ===> 8.1.40.1416
VGA BIos: 2137
GOP: SNB (2.0.36.1019) + IVY (3.0.15.1016)
Raid Rom: 11.5.0.1207
Lan OptionRom: 2.1.1.5/ UEFI:1.1.0.4
01.Fix clear cmos after boot option priorities show error issue.
   02.Update 7752 OEM Gaming series Logo;
   03.Add "Long Duration Power Limit","Short Duration Power Limit","Primary Plane Turbo Power Limit",
     "Secondary Plane Turbo Power Limit" range to 4096.
   04.Fix it will show error characters in Boot device priority after disable some boot options.
   05.Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
   06.Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
     to patch some NV's graphics card capability issue.
   07.Fix some monitor hang B2 issue.
   08.Change French language error in the option "Load Overclocking Profile x".
09.Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
   10.Fix can't detect LSI 9270-8i RAID card.
   11.Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
     but the option has display garbled.
   12.Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
   13.Improve OC memory(2600Mhz+) capability for Intel 7 series project.
14.Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
   15.Modify the PCH Sata Aggressive LPM Support item default value.
   16.Update ME 8.1.40.1416.
This is a Released Bios for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<<Intel Management Engine Driver>>>
Please note that flashing this release occurs entirely at your own risk!
[/quote]

[Z77A-GD65 GAMING] UEFI BIOS [E7751IMS.Pxx Releases]

E7751.P00 Original Bios ==> E7751.P11 Beta Bios
01.Switch to PLL mode for clock buffer.
This is a beta bios release for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<<Intel Management Engine Driver>>>
Please note that flashing this release occurs entirely at your own risk!

E7751.P11 ==> E7751.P12 Beta Bios
ME Version: 8.1.40.1416
VGA: 2137
Raid Rom: 11.5.0.1207
Lan Option: 2.1.1.1
01. Fix UEFI OS 80 port can't show CPU temp issue.
   02. Fix clear cmos after boot option priorities show error issue.
   03. Fixed build-in shell disappear issue when update FixedBootOrder13 module.
   04. Disable "Secure Boot"when "Windows 8 feature" set from "Enabled" to "Disabled"
     to patch some NV's graphics card capability issue.
   05. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
   06. Change French language error in the option "Load Overclocking Profile x".
   07. Limit Snapshot to be triggled just one time while system with multiple USB keyboards plug.
   08. Update SMBIOS module ver 34.
   09. Improve OC memory(2600Mhz+) capability for Intel 7 series project.
   10. Fix can't detect LSI 9270-8i RAID card.
   11. Fix LSI 9270-8i RAID card can be detected in BIOS when Windows 8 feature enabled,
     but the option has display garbled.
   12. Fix GetVariable compatibility issue while enable Win 8 feature upon MahoBay codebase.
   13. Patch some memory user mannule set tcl=12 can't boot when dram frequency>2600MHz.
   14. Adjust Switch to PLL mode for clock buffer solution.
   15. Patch Fast Boot PS2 Devices Support disable function incorrect.
   16. Update ME 8.1.40.1416.
   17. Modify the PCH Sata Aggressive LPM Support item default value..
This is a beta bios release for this board with additional archive for flashing the ME extension.
>>Use the MSI HQ Forum USB flasher<<
Download the compressed archive to your desktop but do not decompress.
Select option 1 of the forum flash tool and point the tool an the compressed archive then follow the direction. This will flash your bios and ME extension.
Once complete you will need to download and re-install the latest version of the Intel Management Engine Drivers.
<<<Intel Management Engine Driver>>>
Please note that flashing this release occurs entirely at your own risk!

[Z87M GAMING] UEFI BIOS [E7866IMS.1xx]

E7866IMS.120 ===> E7866IMS.132
Changes:
01. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
   02. Fix Intel (R) Rapid Start Technology function fail.
   03. DMI Link ASPM default to disable.
   04. Add TseDefaultBootOrder module 4.6.4.1_DefBootOrder_1.3
a. Fix FixedBootOrder change boot option priorities issue.
   05. Fix WHQL test PC Resume fail.
   06. Fix some DMI string writeonce issue.
   07. Change Solution about Associate item SATA Hot-Plug and External Sata.
   08. Fix Serial(COM) Port1 Settings error.
   09. Update MsiOc - SharkBay module to MsiOc_SharkBay_m175
& Update MsiOc SharkBay Private Module m177
a. Patch XTU can't set BCLK ratio issue.
b. Fix DRAM Timing setting not be apply issue when install two memory on channel B and set
timing save exit then change one memory to channel A.
c. Add new token to control OC page spec.
d. Modify EIST item and Turbo Mode item related code in OC page.
e. Move Core Ratio Limit item to OC main Page and modify related code.
f. Add CPU Ratio Apply Mode item and related code.
g. Modify OC Genie Gear 2 setting for 9 series model and modify OC Genie enabled message.
h. Support multi step option select mode for Memory Try It ! function.
i. Move some function struct define and table define to new file.
j. Fix Haswell Refresh CPU GT ratio can't set back to default issue when set GT ratio
above default GT ratio and then enter setup change ratio to Auto.
   10. Remove XHCI USB Mapping patch code.
   11. Fix can't boot to os after enter boot menu without choose any option.
01. Update code base to 4.6.5.4_VEB_1AQQW036.
02. Update MsiOc SharkBay Module m180
& Update MsiOc SharkBay Private Module m183
a. Fix sometimes CPU Base Clock not be apply issue when CPU Base Clock set to 125.03MHz.
b. Modify Extreme OC Config item string to Extreme OC Setup and modify option string.
c. Fix some coding define error.
d. Patch system sometimes always reset at POST issue when run memory fast boot.
e. Add auto adjust voltage related code when set CPU Base Clock over 175MHz.
f. Modfiy current VREF voltage dispaly function code.
g. Fix system unstable issue when use Corsair CMD16GX3M4A2666C11 memory and set XMP to
enabled and modify auto adjust voltage code for 7914.
h. Fix system unstable issue when use Team Vulcan-2133 memory and set XMP to enabled.
03. Fixed Display shows only 16bits of color when install NV Graphic card that VBIOS
support Optimus and set primary video adapter to IGD to Boot up with IGD output.
04. Remove PC Resume fail solution.
05. Fix M-Flash Boot/Recovery Issue.
06. Patch setup select Save & Exit random hang.
   07. Patch WHQL win7 test BitLocker Drive Encryption USB BIOS Logo test fail.
   08. Update MSI_XTU_SharkBay_m118.
& MSI_XTU_SharkBay_Private_m125.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

E7866IMS.120 ===> E7866IMS.132
Changes:
01. Fixed OA30tool change OEMID & OEMTBLID failed when select boot to UEFI OS.
   02. Fix Intel (R) Rapid Start Technology function fail.
   03. DMI Link ASPM default to disable.
   04. Add TseDefaultBootOrder module 4.6.4.1_DefBootOrder_1.3
a. Fix FixedBootOrder change boot option priorities issue.
   05. Fix WHQL test PC Resume fail.
   06. Fix some DMI string writeonce issue.
   07. Change Solution about Associate item SATA Hot-Plug and External Sata.
   08. Fix Serial(COM) Port1 Settings error.
   09. Update MsiOc - SharkBay module to MsiOc_SharkBay_m175
& Update MsiOc SharkBay Private Module m177
a. Patch XTU can't set BCLK ratio issue.
b. Fix DRAM Timing setting not be apply issue when install two memory on channel B and set
timing save exit then change one memory to channel A.
c. Add new token to control OC page spec.
d. Modify EIST item and Turbo Mode item related code in OC page.
e. Move Core Ratio Limit item to OC main Page and modify related code.
f. Add CPU Ratio Apply Mode item and related code.
g. Modify OC Genie Gear 2 setting for 9 series model and modify OC Genie enabled message.
h. Support multi step option select mode for Memory Try It ! function.
i. Move some function struct define and table define to new file.
j. Fix Haswell Refresh CPU GT ratio can't set back to default issue when set GT ratio
above default GT ratio and then enter setup change ratio to Auto.
   10. Remove XHCI USB Mapping patch code.
   11. Fix can't boot to os after enter boot menu without choose any option.
01. Update code base to 4.6.5.4_VEB_1AQQW036.
02. Update MsiOc SharkBay Module m180
& Update MsiOc SharkBay Private Module m183
a. Fix sometimes CPU Base Clock not be apply issue when CPU Base Clock set to 125.03MHz.
b. Modify Extreme OC Config item string to Extreme OC Setup and modify option string.
c. Fix some coding define error.
d. Patch system sometimes always reset at POST issue when run memory fast boot.
e. Add auto adjust voltage related code when set CPU Base Clock over 175MHz.
f. Modfiy current VREF voltage dispaly function code.
g. Fix system unstable issue when use Corsair CMD16GX3M4A2666C11 memory and set XMP to
enabled and modify auto adjust voltage code for 7914.
h. Fix system unstable issue when use Team Vulcan-2133 memory and set XMP to enabled.
03. Fixed Display shows only 16bits of color when install NV Graphic card that VBIOS
support Optimus and set primary video adapter to IGD to Boot up with IGD output.
04. Remove PC Resume fail solution.
05. Fix M-Flash Boot/Recovery Issue.
06. Patch setup select Save & Exit random hang.
   07. Patch WHQL win7 test BitLocker Drive Encryption USB BIOS Logo test fail.
   08. Update MSI_XTU_SharkBay_m118.
& MSI_XTU_SharkBay_Private_m125.
This Bios use is done solely at your risk!Flash Method
1.) >>Use the MSI HQ Forum USB flasher<<
A.) Download the attached archive and place it on your desktop. Do not decompress.
B.) Download and install the Forum flash tool.
C.) Insert your FAT32 formatted usb stick.
D.) Make sure that all win 8 options are disabled. (Fast Boot etc) Also make sure the legacy USB is enabled.
E.) Start the forum flash tool and select option 1. Then point the tool at the compressed archive we downloaded earlier. Then to your USB Flash Drive.
F.) Boot to the USB and follow the directions. MEMTEST is included with the forum flash tool and it is recommended to run this prior to any flash.

MSI B85-G43 Gaming vga issue

HI. I just bought Gigabyte GV n65Toc 1gi. When i tried to install the vga driver i got error messege that says: cant find compatible hardware.
So i checked board explorer and the pci slot is empty. Meanwhile the vga is "running", the fan is working, leds are light.
I've already updated the bios and everyhting but its still "empty" .

you have to ask Gigabyte, as this card is not MSI one
we can help with MSI products only

[MSI B85-G43] Windows freezes watching videos

Hello folks,
My computer is freezing when I watch streams on Twitch and sometimes on Youtube too.
It also happens when I watch movies using Media Player Classic.
I can play games for hours and the system never got stucked.
Can somebody help me?
My specs are:
MOBO: MSI B85-G43 GAMING LGA
PSU: EVGA 500W 100-W1-0500-KR 500W, 80 Plus
GPU: EVGA GTX 970 FTW
RAM: DDR3 Corsair Vengeance CMZ8GX3M1A1600C10B 8GB 1600MHz
Processor: Intel Core i7-4790k 4.0GHz 8MB 4ª Geração LGA 1150
Ps. Sorry for bad english, it's not my main language. :D

I was using Windows 8.1, but I formatted my pc and installed win 7 professional.
The problem happens on both OS.
When I get home I'll try to remove my GPU and test only on Intel HD 4600.
In other forums, I told that my Intel HD was not showing on "System Device's", they told me that it's normal, since my motherboard only uses the GTX, but I don't know. In my opnion, this video/stream it's Intel HD responsability.
I also read something about i7-4790k voltage on the BIOS, but I don't have no clue about what voltage it should or should not be. There are some people that had this problem becaus Intel Turbo Boost too, when I get home I'll check that too.

Re: B85M-g43 Gaming VGA problem

How about my B85-G43-Gaming?

Latest for the board is C23
Make sure this is your board:
http://www.msi.com/product/mb/B85-G43-GAMING.html#download
If so: >>Use the MSI HQ Forum USB flasher<<
Option 1 and point it directly at attached archive, do not extract the files.
If the issue is still occurring, following the posting guide so we know what equipment you have and a better description of the issue: >>Posting Guide<<

Z87-G43 gaming HDMI/DVI ports not working

Board: MSI Z87-G43 gaming edition
Bios: American Megatrends Inc. V10.3, 03/12/2013
VGA: AMD Radeon HD 7970/Samsung SyncMaster P2770
PSU: Corsair CS750M
Intel Core i5-4670K
MEM: 8gb
HDD: Plextor 240gb SSD
OS: Windows 7 64bit Professional
Can't figure why they don't work...I checked my CPU and it's supposed to support integrated GPU. HDMI and DVI work on my videocard so I know it's not a monitor issue. I believe my motherboard chipset drivers are up to date. Any ideas?

you could try to set it to IGD in your BIOS to get the Integrated only working (find a option in your BIOS that is set to PEG and change it to IGD and see how it goes)
NOTE: if you find that settings see if it has a both option!

Request for a GOP UEFI bios for R9 270 gaming 2g

Request for a GOP UEFI bios for R9 270 gaming 2g
thank you

Request for a GOP UEFI bios for R9 270 gaming 2g
thank you
BIOS
http://qd.baidupcs.com/file/f854518f3ebcb6e0918296e99dedbe39?xcode=651e731f64d217396dcee8d89df53b8bbc89b6a7ca8cf985&fid=1141293504-250528-731006637695005&time=1396108361&sign=FDTAXER-DCb740ccc5511e5e8fedcff06b081203-QapW05N0P5fS7fKuuF9rsE%2BzbVI%3D&to=qb&fm=Q,B,T,t&newver=1&expires=8h&rt=pr&r=691888291&logid=3537789216&vuk=1141293504&fn=Pitcairn.rom

[B85-G43 GAMING] UEFI BIOS [E7816IMS.Cxx]

Similar Messages

Maybe you are looking for