Bacground job cancelled in Solman system.

Hi experts,
Two bacground job cancelled in Solman system.
1. SM:SELFDIAGNOSIS
Job started
Step 001 started (program RDSWP_SELF_DIAGNOSIS, variant &0000000001018, user ID SAP*)
ABAP/4 processor: MOVE_TO_LIT_NOTALLOWED_NODATA
Job cancelled
2.SM:SYNC SAP SESSIONS
Job started
Step 001 started (program RDSWPCISERVICEPLAN, variant &0000000001018, user ID SAP*)
Your user has no SAP Support Portal user assigned
Job cancelled after system exception ERROR_MESSAGE
Please give me the soltuin to fix it.
Regards,

Hi Vivek,
1). Adobe forms (TCode SFP) offers a feature where you can pass the value of the table instead of table iteself. For this yuo have to go to SFP > INTERFACE > Interface (Tab) >(Click on) Import
Here, you should see all the parameters listed. On the parameter that you want to meddle with, tick the "Pass Value" checkbox. This solved the issue and prevented the dump.
Exception MOVE_TO_LIT_NOTALLOWED_NODATA
Refer to the Note 834318 ...
2). please maintain the your S - user id in AISUSER t-code. Refer to below link for screenshots.
http://wiki.sdn.sap.com/wiki/display/SM/HowtomaintainthetransactionAISUSERforstandardandVARscenarios
Regards,
Arjun
Edited by: Arjun Venkateswarlu. on Jan 12, 2012 9:35 PM

Similar Messages

SAP Connect Job Cancelling

I keep having this same issue happening every couple of weeks where the scheduled workflow job SAPCONNECT ALL SEND will start canceling out with the error "Job canceled due to system shutdown". Usually when this happens there will be an RFC connection in SM51 that is stuck in a loop. The only way we can fix the issue is by doing a complete reboot of the server. Is this something that normally happens with this job?

Was able to fix the issue by updating to the latest SAPCCMSR.

Job cancelled after system exception ERROR_MESSAGE

Hello all
I am facing the following issue.
A custom report is schedulled and run as backround job. The report should create a txt file on server.
The report works fine in foreground, but as backround job ends up cancelled all the time.
The job log:
Job log overview for job:    VI5 / 13072800
Date       Time     Message text                                                                     Message class Message no. Message type
27.03.2009 13:09:28 Job started                                                                           00           516          S
27.03.2009 13:09:28 Step 001 started (program ZESSRIN110R, variant PR1_0000381, user ID METAPARTNER)      00           550          S
27.03.2009 13:09:28 File creation ERROR:                                                                  00           001          E
27.03.2009 13:09:28 Job cancelled after system exception ERROR_MESSAGE                                    00           564          A
There is no info in SM21 regarding the error.
Can anybody help with this?
Thanx in advance.
imi
Edited by: Imrich Vegh on Mar 27, 2009 2:27 PM

btw the part of my code looks like this:
server path check
    IF p_srv IS NOT INITIAL.
      OPEN DATASET gv_server FOR OUTPUT IN TEXT MODE ENCODING DEFAULT.
      IF sy-subrc EQ 0.     --- I keep receiving 8 here in BACKGROUND JOB
        WRITE : / text-077, gv_server.
      ELSE.
        MESSAGE text-069 TYPE 'E'.
      ENDIF.

Job cancelled after system exception ERROR_MESSAGE in DB13

Hello All,
When i opened the t-code DB13 i saw that this job "Mark tables requiring statistics update" is cancelled.
JOB LOG:
12.02.2011 22:00:16 Job started
12.02.2011 22:00:16 Step 001 started (program RSDBAJOB, variant &0000000000085, user ID 80000415)
12.02.2011 22:00:18 Job finished
12.02.2011 22:00:18 Job started
12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
12.02.2011 22:01:26 Error when performing the action
12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
When check for the BGD Job in SM37 for this job i found the same error in the job log with the status cancelled.
Job log overview for job: DBA!PREPUPDSTAT_____@220000/6007 / 22001700
12.02.2011 22:00:18 Job started
12.02.2011 22:00:18 Step 001 started (program RSADAUP2, variant &0000000000081, user ID 80000415)
12.02.2011 22:01:26 Error when performing the action
12.02.2011 22:01:26 Job cancelled after system exception ERROR_MESSAGE
I couldn't find any logs in SM21 of that time also no dumps in ST22.
Possible reason for this error:
I have scheduled the job Check database structure (only tables) at some other time and deleted the earlier job which was scheduled during the bussiness hours which caused performance problem.
So to avoid performance issue i scheduled this job in the mid night by cancelling the old job which was scheduled during the bussiness hours.
And from the next day i could see this error in DB13.
Rest all the backups are running fine but the only job getting cancelled is for "Mark tables requiring statistics update"
Could anyone tell me what should i do to get rid of this error?
Can i schedule this "Mark tables requiring statistics update" again by deleting the old one?
Thanks.
Regards.
Mudassir Imtiaz

Hello Adrian,
Thanks for your response.
Every alternate day we used to have performance issue at 19:00hrs.
Then when i checked what is causing this problem, i discovered that there was a backup "Check Database Structure (tables only)" scheduled at this time and it was mentioned that this backup may cause performance issue.
Then i changed "Check Database Structure (tables only)" the time of this backup to 03:00hrs.
The next day when i checked DB13 i found that one of the backups failed.
i.e. "Mark Tables Requiring Statistics Update"
Then i checked the log which i posted earlier with the error: "Job cancelled after system exception ERROR_MESSAGE"
I posted this error here and then i tried to delete the jobs scheduled i.e. "Mark Tables Requiring Statistics Update" and then re-schedule it at the same time and interval.
And then it started working fine.
So i just got curious to know the cause of the failure of that job.
Thanks.
Regards,
Mudassir.Imtiaz
P.S There is one more thing which i would like to say which is not related to the above issue, and m sorry to discuss this in this thread.
I found a few Bottlenecks in ST04 with Medium and High priority.
Medium: Selects and fetches selectivity 0.53%: 122569 selects and fetches, 413376906 rows read, 2194738 rows qualified.
High: 108771 primary key range accesses, selectivity 0.19%: 402696322 rows read, 763935 rows qualified.
There are a lot these.
I would really appreciate if you tell me what is the cause for these Bottlenecks and how to resolve.
Thanks a lot.

Background job Z_SC_STATUS_CHECK_1 is getting cancelled in EBP system

Hi,
We are facing following error with the batch job Z_SC_STATUS_CHECK_1-" Error INSERT in BBP_DOCUMENT_TAB" with the erroe message "Job cancelled after system exception ERROR_MESSAGE?".
We are using an SRM 3.0 version.
Can you please provide any inputs on the same.
Regards,
Rohit

SInce this is a Z function, you should explain something more likewise what it does etc.....
Did you analysed the dump in ST22.

Background job canceled in Solution Manager system

Dear all expert ,
Two background jobs canceled in solution manager system before some time.
details-
Background jobs :
                    1 - LANDSCAPE FETCH
    Program name : RSGET_SMSY
Job log : Job started
Step 001 started (program RSGET_SMSY, variant ,
The SLD server connection is inactive
Job cancelled after system exception ERROR_MESSAGE
                   2 - SEND_SYSTEM_RELATIONSHIP_TO_SUP
    Program name : AI_SC_SEND_SYSTEM_RELATIONSHIP
Job log :
                   Job started
Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant ,
SOL determined as monitoring Solution Manager system
SAP customer number unknown for installation number 0020606335
Job cancelled after system exception ERROR_MESSAGE
please help me , what should i do ?
I am waiting for your positive response.
Regards
Shubh

hi,
You can try following ....
For the job SEND_SYSTEM_RELATIONSHIP_TO_SUP
Program : AI_SC_SEND_SYSTEM_RELATIONSHIP
1. Up to Support Package 09:
a) Start transaction SMSY.
b) Choose Shft+F5.
c) Select the system named in the message.
d) Choose F6.
e) Select the "System Data in SAP Support Portal" tab.
f) Using the input help, fill the system number field with the correct system.
g) Save the data.
2. Up to and including Support Package 08:
a) Start transaction SOLMAN_CONNECT.
b) Select the system in question in the ID field and choose the filter pushbutton.
c) Select the system and select "Create configuration".
d) Fill the system number field using the input help with the correct system.
e) For example, select the "BW GUI Connection" service type.
f) Carry out all of the subsequent steps of the Configuration Assistant until you see the "Finish" pushbutton.
This establishes a unique relationship between your system in the Solution Manager and the system number in the SAP Support Portal. Problems no longer occur with this system when the SEND_SYSTEM_RELATIONSHIP_TO_SUPP job is next run. However, the problem may still exist for other systems (in these cases, you should follow the same steps).
Hope this will help to solve your issue..
Regards
Bhuban
RKFL

Error when executing APD-Job cancelled after system exception ERROR_MESSAGE

Hi,
We have a process chain which executes a APD using an ABAP program RSAN_PROCESS_EXECUTE.
It was executing successfully until few days back but now a days frequently once in 3 days roughly it is getting cancelled during execution of ABAP Program with the message 'Job cancelled after system exception ERROR_MESSAGE'
checked st22 and sm21 but didn't get any clue.But if we execute the same process chain manually(Immediate load) it is working fine all the times.
What may be the reason for the cancellation of the chain sometimes and the same chain working fine some other time and working very much fine when ran manually.
Regards,
Vishnu

Hi Vishnu,
Can you check if there are any other process which is triggering the abap program RSAN_PROCESS_EXECUTE at the same time as the execution of this process in the chain. You can check in which other chains this process is being used. You can compare the time when this failed in the chain you mentioned with the same being run in other chains at the same time.
Sasi

Jobs are cancelled in source system

hI all,
i scheduled process chain. load was chain was failed .failed request is showing jobs are cancelled in source system? why jobs are cancelled in source system & how to solve this error.
Thanks,
chandu

Try to repeat the process manually, as a temporary fix.
Check in SM58 and BD87 for pending tRFCs and IDOCS and puch them using F6
But you can analyze as advised by BR and Venugopal.
Hope it helps,
Naveen
Edited by: Naveen Vytla on Jul 21, 2008 2:46 PM

Reg:job cancelled after system exception ERROR_MESSAGE

Hi All,
Process chain has failed in aggregate step with message "job cancelled after system exception ERROR_MESSAGE"
But i manaully done the aggregate step.
But i would like to know the reason for the above message.
Can any one tell me this?
Thanks
SS

Hi,
In the job log of aggregate step in the above line of the message "job cancelled after system exception ERROR_MESSAGE" you will probably find the exact error message.
In the job log it will first display the exact error message and then the message "job cancelled after system exception ERROR_MESSAGE" will appear, Please check it once.

Job cancelled after system exception ERROR_MESSAGE - Why ?

Hi to all,
Anyone knows why, when I execute a program in foreground, everything is ok . When I try to execute it in background (schedulated in a job ) I obtain "Job cancelled after system exception ERROR_MESSAGE
Message no. 00564"
I have a check in 'at selection-screen event' to control "no data output" with an custom error message.
I really don't understand why job is cancelled !
Any ideas ?
Thanks in advance .

Hi,
 Write your message after start-of-selection.
 Instead of putting an error message you can write the message while executing the program in background.
 after select .......
 if sy-subrc <> 0.
 if sy-batch = 'X'.
 write :/ 'No data found'.
 else.
 message e000 with 'No data found'.
 endif.
 endif.
Regards,
Srini.

SEND_SYSTEM_RELATIONSHIP_TO_SUPP job cancelled in Solution Manager system

Hello Gurus,
Weekly job "SEND_SYSTEM_RELATIONSHIP_TO_SUPP" getting cancelled due to report AI_SC_REFRESH_READ_ONLY_DATA has errors. Could you please let me know what is the cause for issue.
Thanks in Advance
Prabhu

Hi Markus,
The Job log showing this:
Job log overview for job:    SEND_SYSTEM_RELATIONSHIP_TO_SUPP / 0914100F
Date       Time     Message text                                                                            Message class Message no. Message type
20.07.2009 09:14:14 Job started                                                                                00           516          S
20.07.2009 09:14:14 Step 001 started (program AI_SC_SEND_SYSTEM_RELATIONSHIP, variant , user ID SAPSUPPORT)      00           550          S
20.07.2009 09:14:23 Report AI_SC_REFRESH_READ_ONLY_DATA has errors                                            AI_SC_EN        061          E
20.07.2009 09:14:23 Job cancelled after system exception ERROR_MESSAGE                                           00           564          A
Thanks
Prabhu

BWREMOTE background job canceled in sap r/3 system

Hi my friends,
Thanks for your help ahead.
Today I checked the background job in SAP R/3 created by BWREMOTE via SM37. It showed me some jobs had been canceled.
I displayed its log, the detail message is:
==========================================
Step 001 started (program SBIE0001, variant &0000000083494, user name BWREMOTE)
DATASOURCE = ZQM_NOT_SHFGRP
Call up of customer enhancement BW_BTE_CALL_BW204010_E (BTE) with 1,593 records
Result of customer enhancement: 1,593 records
Call up of customer enhancement EXIT_SAPLRSAP_001 (CMOD) with 1,593 records
ABAP/4 processor: SAPSQL_INVALID_FIELDNAME
Job cancelled
==========================================
Then I displayed the "Long Text" of the job log. It is
One of the field names in the SELECT clause was not recognized.
Error analysis
The SELECT clause was specified in an internal table at runtime.
It contains the field name "TPR00", but this does not occur in any of
the database tables listed in the FROM clause.
Information on where termination occurred
The termination occurred in the ABAP/4 program "SAPLXRSA " in
"EXIT_SAPLRSAP_001".
The main program was "SBIE0001 ".
Source code extract
008840 concatenate 'TPR'
008850 day_temp+6(2)
008860 ' = '
008870 ' ''' zshift '''' into
008880 cond .
008890 append cond to itab .
008900 select schkz into i_not_shfgrp-zzschkz from t552a
008910 where zeity = '2'
008920 and mofid = 'CN'
008930 and mosid = '28'
008940 and ( schkz = 'SFTA' or
008950 schkz = 'SFTB' or
008960 schkz = 'SFTC' or
008970 schkz = 'SFTD' )
008980 and kjahr = day_temp+0(4)
008990 and monat = day_temp+4(2)
> and (itab) .
009010 endselect.
I guess that there is not a field named TPR00 in table t552a.
Next, I opened the 'project management of sap enhancement' via CMOD, entering the project name and chosing 'Display'.
Then Double click the Components 'EXIT_SAPLRSAP_001', we can see the function module 'EXIT_SAPLRSAP_001'. In the source codes, there is an include program, it is 'INCLUDE ZXRSAU01.'.
Then, I double clicked the Include program and find the position program terminated. The source codes are:
ZQM_NOT_SHFGRP *
when 'ZQM_NOT_SHFGRP'.
loop at c_t_data into i_not_shfgrp .
l_tabix = sy-tabix .
clear :mbatch ,zshift,cond ,zfield, zcharg, day_temp .
refresh itab.
if i_not_shfgrp-ausvn is initial.
else.
aa = '080000'.
bb = '160000'.
cc = '235959'.
day_temp = i_not_shfgrp-ausvn.
if i_not_shfgrp-auztv ge aa and
i_not_shfgrp-auztv lt bb .
zshift = 'MSHF' .
elseif i_not_shfgrp-auztv ge bb and
i_not_shfgrp-auztv le cc .
zshift = 'LSHF'.
else .
zshift = 'NSHF'.
day_temp = i_not_shfgrp-ausvn - 1.
endif.
concatenate 'TPR'
day_temp+6(2)
' = '
' ''' zshift '''' into
cond .
append cond to itab .
select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) .
endselect.
endif.
I found that we got a TPR00 during concatenation. In other words, day_temp+6(2) = 00. But I think it is impossible. I can not explain this.
Any ideas, my friends. Many thanks.

select schkz into i_not_shfgrp-zzschkz from t552a
where zeity = '2'
and mofid = 'CN'
and mosid = '28'
and ( schkz = 'SFTA' or
schkz = 'SFTB' or
schkz = 'SFTC' or
schkz = 'SFTD' )
and kjahr = day_temp+0(4)
and monat = day_temp+4(2)
and (itab) . => doesn't make sense?!
endselect.
endif.
it seems something got deleted between 'and' and '(itab)'... so, you'll have to recheck the requirements for your select to fill the 'and' statement further.
so, it should look like
and monat = day_temp+4(2)
and <some kind of condition that needs to be fulfilled>.
endselect.
<some logic to fill a line in your internal table>.
append cond to itab.
endif.
obviously <some kind of condition that needs to be fulfilled> needs to be replaced by a real condition
and <some logic to fill a line in your internal table> needs to be replaced by some kind of formula
I assume something like (otherwise it would be really weird to select that field):
cond = i_not_shfgrp-zzschkz.
or a formula using the i_not_shfgrp-zzschkz field.
It would also be a lot better to replace your select ... endselect by a select single as you'll be selecting 1 record only anyways.
Message was edited by:
RafB

Job cancelled While loading data from DSO to CUBE using DTP

Hi All,
while i am loading data frm DSO to CUBE the job load is getting cancelled.
in the job overview i got the following messages
SYST: Date 00/01/0000 not expected.
Job cancelled after system exception ERROR_MESSAGE
wt can be the reason for this error as i have successfully loaded data into 2 layers of DSO before loading the data into the CUBE

hi,
Are u loading the flat file to DSO?
then check the data in the PSA in the date field and replace with the correct date.
i think u r using write optimised DSO which is similar to PSA it will take all the data from PSA to DSO.
so clear the data in PSA and then load to DSO and then to CUBE.
If u dont need a date field in CUBE then remove the mapping in transformation in cube and activate and make DTP activate and trigger it it will work.

Job terminated in source system - Request set to red during delta load

Hi All,
There is issue with the delta load where as full load works fine and it results in below job termination with below log.
Job started
Step 001 started (program SBIE0001, variant &0000000128086, user ID ALEREMOTE1)
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 2LIS_13_VDITM
RLOGSYS    = BWP_010
REQUNR     = REQU_DA9R6Y5VOREXMP21CICMLZUZU
UPDMODE    = R
LANGUAGES = *
         Current Values for Selected Profile Parameters               *
abap/heap_area_nondia......... 0                                       *
abap/heap_area_total.......... 17173577728                             *
abap/heaplimit................ 40000000                                *
zcsa/installed_languages...... DE                                      *
zcsa/system_language.......... E                                       *
ztta/max_memreq_MB............ 2047                                    *
ztta/roll_area................ 3000000                                 *
ztta/roll_extension........... 2000000000                              *
Object requested is currently locked by user ALEREMOTE1
Job cancelled after system exception ERROR_MESSAGE
Please help me to resolve this issue.
Thanks,
Madhu,

Hello,
As per the screen shot provided below, data soruce belongs to LO, so first check in RSA7, whether it has got mark in RSA7, for which you have entries in RSA7 against the data source. If you are not able to find the data source in RSA7, then you need to set-up the update methods, based on the requirement.
1) Direct Delta
2) Queued Delta
3) Unserialised V3 Update
Once it is done, Delete the Previous Initilisation, again perform the Re-Init With Out data and now schedule the Delta Data Loads
Hope this may Help you.
Thanks
PT

Job terminated in source system -- Request set to red,SAPSQL_SQLS_INVALID_

Hi All,
can any one help on this issue.
I run the BI statistics in production and found out the error while triggering the delta's
Error message from the source system
Diagnosis
An error occurred in the source system.
System Response
Caller 09 contains an error message.
Further analysis:
The error occurred in Extractor .
Refer to the error message.
Procedure
How you remove the error depends on the error message.
Note
If the source system is a Client Workstation, then it is possible that the file that you wanted to load was being edited at the time of the data request. Make sure that the file is in the specified directory, that it is not being processed at the moment, and restart the request.
Error msg : Job terminated in source system --> Request set to red
Message no. RSM078
Job started
Step 001 started (program SBIE0001, variant &0000000000756, user ID
Asynchronous transmission of info IDoc 2 in task 0001 (0 parallel tasks)
DATASOURCE = 0TCT_DSA1
RLOGSYS = BCLNT300
REQUNR = REQU_D4GZHNLA3PSQ7XRNGL0EMV6AP
UPDMODE = D
LANGUAGES = *
Current Values for Selected Profile Parameters *
abap/heap_area_nondia......... 0 *
abap/heap_area_total.......... 2147483648 *
abap/heaplimit................ 40894464 *
zcsa/installed_languages...... ED *
zcsa/system_language.......... E *
ztta/max_memreq_MB............ 2047 *
ztta/roll_area................ 3000320 *
ztta/roll_extension........... 2000683008 *
ABAP/4 processor: SAPSQL_SQLS_INVALID_CURSOR
Job cancelled
But delta laoding for same is working in DEV...but not in prod...
Please suggest
Regards
Shweta

Swetha
finally found out the notes.
Please look into them and ask you basis to implemnt,
1161940
1106569
1145041
1146851
Please have a look and ask for implemtation in your system which are suitable for you
We also faced the same issue job termination in source system for BI Statistics
Regards#
Srini

Bacground job cancelled in Solman system.

Similar Messages

Maybe you are looking for