Back arrow does not work with SQL Server Reporting Services Reports. When one pages back from a sub report the back action appears to skip moving to the previous step. IE 8 works fine?

I have a SSRS report that has a parameter driven drop down list to select a catagory for a report to run a summary for the category in Report Manager. When the report runs there are links to a sub report with more detailed information about the category summary. Firefox runs everything correctly up to this point.
When I try to back arrow from the sub report Firefox skips the summary report page and reverts to the initial page where the sub category can be selected to run the summary report.
Can you help? IE8 works well with this but has severe spped issues with reports that contain multiple selection parameters. Firefox handles the multiple parameters very fast but has the page back issue.

I have a SSRS report that has a parameter driven drop down list to select a catagory for a report to run a summary for the category in Report Manager. When the report runs there are links to a sub report with more detailed information about the category summary. Firefox runs everything correctly up to this point.
When I try to back arrow from the sub report Firefox skips the summary report page and reverts to the initial page where the sub category can be selected to run the summary report.
Can you help? IE8 works well with this but has severe spped issues with reports that contain multiple selection parameters. Firefox handles the multiple parameters very fast but has the page back issue.

Similar Messages

  • Add does not run with sql server 2008

    Hi all,
    My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
    On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
    we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
    is installed.
    Help needed.
    Thanking you
    Pradnya

    Hi Use this
    Dim i as integer
    i=oCompany.Connect()
    if i<> 0 Then
    msgbox(ocompany.GetLastErrorDescription ())
    end if
    the you will get the error description also use try catch wherever necessary
    Alternatively you can use
    Dim SboGuiApi As SAPbouiCOM.SboGuiApi
    Dim sConnectionString As String
    Set SboGuiApi = New SAPbouiCOM.SboGuiApi
    sConnectionString = Command
    SboGuiApi.Connect sConnectionString
    Set SBO_Application = SboGuiApi.GetApplication()
    Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
      ocompany = SBO_Application.Company.GetDICompany
    HTH,
    Atul

  • Database Mail not working with SQL Server Agent

    I'm running SQL Server 2005 Standard edition 64 bit with SP2 on a 64 bit machine. 
    Database mail does not work with SQL Server Agent.  When I configure SQL Server Agent to use database mail the test email button is greyed out and inactive therefore I cannot send emails using operators or for jub success failure etc. 
    I've read that there was supposed to be a fix for this with SP1 but I have SP2 and still receive the same problem.  Please can somebody help as I do not wish to use SQL Mail as a work around due to this becomming redundant in future versions of SQL Server.
    Kind Regards

    The problems solved
    steps:
    1)we create a mail profile at at Managment->Database Mail ,of SQL Managment
    2)we set this account as "default" at Managment->Database Mail -> Configure Database Mail -> Manage profile security
    3)At tab "Alert System" of SQL Server Agent properties , we check the "Enable mail profile" , Mail System=Database Mail, Mail profile = "the profile we already create"
    4)we create a new operator at "Operators" of sql agent, where at "notification options" -> "Email name" we put the mail where we want to sent the agent the mails at failured job
    5)We go at a specific job, at tab "Notifications" ,we check the "email" check box and then we choose the operator we just create, at the text box next to check box.
    I hope not to forget something
    Thank You all for the help

  • The Back arrow does not always work, particularly with Amazon and eBay sites.Even the on-page Back arrows do not work either.

    I am using version 15.0.1. Since I updated to this version, the Back arrow does NOT always work particularly with Amazon and eBay. This is particularly evident when I go from a list the result of a search to an item on the lis. I cannot get back to the list even using the On-page Back arrow. I usually have to repeat the search to get back to the list again.

    Hi MorrellMurphy
    probably problem with [http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox Locked or damaged places.sqlite] file
    thank you

  • Can TS work with sql server compact or express?

    I'm don't have much experience with the underpinning of database systems.  I know conceptually how they work and can hack my way through sql queries.  Is there something fundamentally different about a Sql Server Compact itnstall versus Sql Server versus Sql Server Express?  Can TS work with any of them with a proper connection string?
    My problem is at our local site a previous employee set us up on Sql Server and wrote a web app (.asp) to do the query for presentation on a web page.  At an offsite location they can't install Sql Server and I'm trying to figure out the best path for them to be able to use the same .asp tool we have.  My gut feeling is the .asp tool is probably set up such that it wouldn't take much to make it work with MySql but because I don't have the luxury of time I'm hoping someone can point me in what they think might be the easiest direction (whether that is sql compact if possible or MySql for them).

    Hi,
    TestStand works with SQL server express. (not sure about SQL server compact).
    Ravi

  • ColdFusion8 works with SQL Server 2008 compatibility level 90?

    We're currently is using ColdFusion8 and need to upgrade the database from SQL Server 2000 to 2008. Will ColdFusion8 work with SQL Server 2008 compatibility level 90?

    Hi,
    ColdFusion 8 is not supported with SQL Server 2008. A list of supported environment is available at http://www.adobe.com/products/coldfusion/pdfs/cf8_systemsupportmatrix.pdf
    Regards,
    Anit Kumar

  • SQL Server Usage Summary page, the count of user/device: does not show for SQL Server 2008

    Does MAP tool capture User Summary  (count of users, their details) for SQL Server 2008? 
    At my end, its working for SQL Server 2012 but not showing User Summary for SQL Server 2008..
    Does the User Summary only works for SQL Server 2008 Enterprise edition as one of the thread points out?

    This is from the
    Wiki article:
    SQL Server 2008 Enterprise and Datacenter Editions introduced audit event configuration for Windows security logging, which enabled SQL Server 2008 to log logon events to the Windows Security log. The table below shows which versions and editions have the Audit
    feature that is needed to record the logon events. MAP cannot obtain user and device access information for any other editions or any older versions of SQL Server.
    Datacenter
    Enterprise
    Business Intelligence
    Standard
    Workgroup
    Web
    Express
    SQL Server 2008
    N/A
    Yes
    N/A
    No
    No
    No
    No
    SQL Server 2008 R2
    Yes
    Yes
    N/A
    No
    No
    No
    No
    SQL Server 2012
    N/A
    Yes
    Yes
    Yes
    N/A
    Yes
    Yes
    Please remember to click "Mark as Answer" on the post that helps you, and to click
    "Unmark as Answer" if a marked post does not actually answer your question. Please
    VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

  • 1520 - Back arrow does not light up

    On my GF's 1520 the back arrow does not light up.  I did not notice this problem when I set up the device new out of the box 2 days ago.  I have not tried a factory data reset because I am hoping there is another option.
    Thanks!

    If you have just purchased the device, take it back and exchange it.
    You should not be dealing with a faulty led illumination.
    Those particular ones are very small and soldered directly to the screen/behind the digitizer.
    I cannot say that it is a #bendgate type of issue, but would certainly exchange it if it was mine.

  • My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    My IPhone does not show up under Devices in I Tunes when I plug it into my computer. "Devices" no longer appears on the menu at all down the side of the page.

    Hope this helps:
    http://www.apple.com/support/iphone/assistant/itunes/

  • I can not sync with itunes iphone , is catching, and when it begins to sync is a long time and then appears a message that no time to help sincronização.Me am without some music

    I can not sync with itunes iphone , is catching, and when it begins to sync is a long time and then appears a message that no time to help sincronização.Me am without some music

    You are correct.  Syncing should transfer any purchased media, including videos, from your device to your iTunes library provided your computer is authorized for the Apple ID used to make these purchases.  You mentioned that you have uninstalled iTunes before, but if you didn't follow this guide exactly, uninstalling iTunes and all of its components in the order specified, it may not have been successful so you should try again:  Windows XP or Windows Vista/7.

  • Does OBI SE1 work with SQL server 2005

    Does anybody know if SQL Server 2005 can be used with OBIEE?
    Any responses would be appreciated.

    Yes. Create a new database in the physical layer of the rpd and open the "Database" dropdown in the "Data source definition"...not the "SQL Server 2005" entry there.
    Cheers,
    C.

  • Select works with SQL Server but not with Oracle!

    Hello
    this select works on SQL Server correct, but it don't work on Oracle!
    Can someone help me?
    Select * from Tabelle, Tabelle as XXX Where Tabelle.ID=XXX.IDTabelle
    Thanks
    Thomas

    Hi,
    These are the things which I have noticed, which wont work in Oracle ..
    Table As XXX ?? Are you giving alias name for the table .. The syntax which you have givne doesnt work in Oracle
    Regards

  • Will Report Builder 2012 Work with SQL Server 2008???

    Simple question really
    Will Report Builder 2012 work in conjunction with SQL Server 2008???
    Is it worth while upgrading?
    The main reason i ask is the ability to export in an xlsx format
    Thanks

    Hi Gmach,
    The version of Report Builder on SQL Server Reporting Service (SSRS) 2012 is Report Builder 3.0. The Report Builder 3.0 manufactures 2010 RDL reports, so it only works with the version of SQL Server 2008 R2 or later. So in your scenario, we can no connect
    to SQL Server 2008 Server using Report Builder that on SSRS 2012.
    If you have any questions, please feel free to ask.
    Regards,
    Charlie Liao
    TechNet Community Support

  • JTDS not connecting with SQL Server 2008 R2 SP2 + SSL with Java 6 U34-35

    Environment:
    Windows 7 Pro 32-bit
    SQL Server 2008 R2 SP2 (Forced Encryption = Yes, No Certificate provided to server)
    Java 6 Update 27-35 and Java 7 Update 2-7
    jTDS 1.2.2 and 1.2.6
    Under the following setup, our Java application is able to connect to the SQL Server database:
    - SQL Server 2008 R2 SP2
    - Java 6 Update 27-33 or Java 7 Update 2-5
    just switching the JVM to the following would cause the application to be unable to connect to the database:
    - Java 6 Update 34 or 35, or Java 7 Update 6 or 7
    Browsing through the Java 6 Update 34 release notes, it looks like nothing big was changed, so I'm wondering what has changed with Java 6 U34 and Java 7 U6. I was also looking through a packet sniffer, and indeed the behavior of Java 6 Update 33 and lower was different from Java 6 Update 34 (although I couldn't understand the messages being passed, the number of connections and messages were different).
    * This is different from the issue with Java 6 Update 29-30 and Java 7 wherein they were patched for the BEAST SSL vulnerability. That was fixed with the SP2 patch for SQL Server 2008 R2, and for SQL Server 2008 you'd need a hotfix aside from SP3. After patching the server with those updates, Java 6 Update 29-33 and Java 7 U1-5 should be able to connect to the database.
    * If I do switch off Force Encryption, all Java versions are able to connect to the database.
    Edited by: user1357749 on Oct 12, 2012 1:20 AM

    Hi,
    It's four months later, but my colleague and I have reproduced the same behavior in both our commercial product, and a very simple example class. It's exactly as you describe it, where the latest versions of both Java 6 and 7 (and several previous versions) hang during the first jTDS SQL query to the DB (immediately after the SSL and handshake). It also happens with the Microsoft JDBC driver.
    If you disable the BEAST SSL fix (-Djsse.enableCBCProtection=false), then the connections work without any problems. So, while this is different from the original BEAST SSL problem and subsequent fix, it really seems like some additional changes were made to the fix in a later Java release that broke things.
    My colleague has filed a bug with Oracle, and is awaiting a response. We also filed a bug at the jTDS project (#690 - http://sourceforge.net/p/jtds/bugs/690/) that has simple reproduction steps. A contributer at the jTDS project agrees that this seems to be a problem with the JRE, and is not specific to jTDS.
    I hope that Oracle will address this issue soon. We need to periodically update the JRE due to vulnerabilities, and we need to have SSL for our JDBC connections for security reasons. This bug puts us and others in a difficult position.

  • Does BPEL 10.1.2.0.2 work with SQL Server JDBC 2005 driver?

    Hi, wondering if any one has got 10.1.2.0.2 or .0.0 to work with the SQL Server 2005 jdbc driver. I have placed the sqljdbc.jar file in the OC4J_BPEL/applib/ directory in place of the previous 3 2000 drivers.
    I then modified the connections I had in oc4j-ra.xml so that the:
    driverClassName was com.microsoft.sqlserver.jdbc.SQLServerDriver instead of com.microsoft.jdbc.sqlserver.SQLServerDriver
    the connectionString was jdbc:sqlserver:/ instead of jdbc:microsoft:sqlserver/
    Forgot to add that after putting in the new driver and making the above changes we now get an error when running a process that connects to SQL Server that "Connection Refused"
    Aside, has anyone found any performance benefits between 2000,2005 or datadirect sql server drivers?
    Thank you,
    Ashley

    Hi
    Did u able to connect to SQL Server 2005 with jdbc driver.
    If yes could you please provide me the solution. I am also facing the same issue.
    Thanks

Maybe you are looking for