ColdFusion8 works with SQL Server 2008 compatibility level 90?
We're currently is using ColdFusion8 and need to upgrade the database from SQL Server 2000 to 2008. Will ColdFusion8 work with SQL Server 2008 compatibility level 90?
Hi,
ColdFusion 8 is not supported with SQL Server 2008. A list of supported environment is available at http://www.adobe.com/products/coldfusion/pdfs/cf8_systemsupportmatrix.pdf
Regards,
Anit Kumar
Similar Messages
-
Will Report Builder 2012 Work with SQL Server 2008???
Simple question really
Will Report Builder 2012 work in conjunction with SQL Server 2008???
Is it worth while upgrading?
The main reason i ask is the ability to export in an xlsx format
ThanksHi Gmach,
The version of Report Builder on SQL Server Reporting Service (SSRS) 2012 is Report Builder 3.0. The Report Builder 3.0 manufactures 2010 RDL reports, so it only works with the version of SQL Server 2008 R2 or later. So in your scenario, we can no connect
to SQL Server 2008 Server using Report Builder that on SSRS 2012.
If you have any questions, please feel free to ask.
Regards,
Charlie Liao
TechNet Community Support -
I am investigating the impact of upgrading from SQL Server 2008 R2 to SQL Server 2012. To reduce the impact of the upgrade, I am planning to restore / create our application database onto SQL Server 2012 with compatibility level 100 (SQL Server 2008 and
SQL Server 2008 R2).
Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?Are there any differences in feature support for database running in native mode on SQL Server 2008 R2 vs a database installed on SQL Server 2012 with compatibility level 100 set?
Yes there can be difference and impact there are few features deprecated in SQL Server 2012 you must be aware about that. Please see
Deprecated Database Features in SQL Server 2012
Deprecated SQL Server features in SQL Server 2012
After you migrate database to 2012 please don't move ahead with production unless you have tested your application to new created database
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP -
I have recently installed SQL Server 2008. When I try to execute a query against an Access database, I receive this debugging error:
"Unable to start Transact-SQL debugger. The Transact-SQL debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors)"
Nor will the query execute; I get a transport-level error 0. Any thoughts?Hi Davidmhjr,
>>Unable to start the Transact-SQL Debugger. The Transact-SQL Debugger does not support SQL Server 2005 or earlier versions of SQL Server. (SQLEditors).
Have you tried to restart the server once you have installed SQL Server 2008? As Naomi N mentioned please check the version of SQL Server you are using.
If you tried to connect to SQL Server 2005 from SQL Server 2008 SSMS, you would not be able to debug and get this error, it happens because T-SQL debugger includes both server-side and client-side components. The server-side debugger components are installed
with each instance of the SQL Server 2008 Database Engine. The client-side components are installed when you install the SQL Server 2008 client-side tools.
So it works with SQL Server 2008 only so far. Another way is you can triy to use SQL Server 2005 SSMS to connect to SQL Server 2005.
More information about configuration requirement to run T-SQL debugger as below, please refer:
There are no configuration requirements to run the Transact-SQL debugger when SQL Server Management Studio is running on the same computer as the instance of the SQL Server Database Engine. However, to run the Transact-SQL debugger when SQL Server Management
Studio is running on a different computer from the instance of the Database Engine, you must enable program and port exceptions by using the Windows Firewall Control Panel application on both computers.
On the computer that is running the instance of the Database Engine, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add the program sqlservr.exe to the exceptions list. By default, sqlservr.exe is installed in C:\Program Files\Microsoft SQL Server\MSSQL10.InstanceName\MSSQL\Binn, where InstanceName is MSSQLSERVER for the default instance, and the instance name for
any named instance.
•If the domain policy requires network communications to be done through IPsec, you must also add UDP port 4500 and UDP port 500 to the exception list.
On the computer that is running SQL Server Management Studio, in Windows Firewall, specify the following information:
•Add TCP port 135 to the exceptions list.
•Add program ssms.exe (SQL Server Management Studio) to the exceptions list. By default, ssms.exe is installed in C:\Program Files\Microsoft SQL Server\100\Tools\Binn\VSShell\Common7\IDE.
Hope it is helpful.
Regards, Amber zhang -
Distributed transaction using linked server not working in SQL Server 2008 64 bit
Hi. I have had an issue trying to get distributed transactions to work in SQL Server 2008 using a linked server. The error message I get is
OLE DB provider "SQLNCLI10" for linked server "pod1" returned message "No transaction is active.".
Msg 7391, Level 16, State 2, Line 3
The operation could not be performed because OLE DB provider "SQLNCLI10" for linked server "pod1" was unable to begin a distributed transaction.
My Environment:
Windows Server 2008 Enterprise 64 bit, SQL Server 2008 Enterprise 64 bit
Problem occurs with multiple different builds of SQL Server 2008 - I have been able to reproduce the problem with 10.0.1600.0, 10.0.1779.0 (CU 2), as well as 10.0.2531 (SP1)
I am aware that other people have had this issue and have reviewed all existing posts. I have verified that the MSDTC is configured correctly on both machines. I have also used DTCTester to verify that DTC is working correctly on all machines in question.
None of the mentioned resolutions has solved this problem for me.
I am not seeing this problem occur on my 32 bit test machines - it is only occurring if at least one of the two machines is 64 bit.Hi All,
I realise that this topic may be a little bit out-of-date but if someone gets here from some search engine trying to find a solution for DTC problems, this MAY be useful.
So... I recently had the same issue, tried all the approaches described in KB and other articles, but it didn't help. Because my task to solve this was not of the highest priority I forgot about it for some time.
Today I was troubleshooting some other issue and, by accident discovered source of that first problem:
In the EventViewer I found Error entry logged by MSDTC saying:
"The local MS DTC detected that the MS DTC on vm-server1 (other machine name that also runs DTC - my comment) has the same unique identity as the local MS DTC. This means that the two MS DTC will not be able to communicate
with each other. This problem typically occurs if one of the systems were cloned using unsupported cloning tools. MS DTC requires that the systems be cloned using supported cloning tools such as SYSPREP. Running 'msdtc -uninstall' and then 'msdtc -install'
from the command prompt will fix the problem. Note: Running 'msdtc -uninstall' will result in the system losing all MS DTC configuration information."
So I followed suggestion and run:
msdtc -uninstall
msdtc -install
This solved my problems with DTC. Hope it will help someone.
Piotr -
DI Server with SQL Server 2008
Hello.
In the company where I work we develop an application that uses B1WS.
In the development environment had the following characteristics:
SAP Business One 2007 SP01, PL 09
SQL Server 2005 Developer Edition
Windows XP Professional SP 3
SAP Business One Web Services 1.0
At the time we applied to the deploying the SAP Business One version 8.8, but I had a serious problem. The test environment has the following characteristics:
SQL Server 2008 Enterprise Edition
SAP Busines One 8.8 * PL 10
Windows Server 2008
The problem is that when trying to connect to the DI Server generates the following messages:
The TAO NT Naming Service has stopped. (WithOut DBUser and DBPassword)
Unable to access SBO-Common database Login (With DBUser and DBPassword)
I tested the connection directly to the DI Server disponbile by example in the SDK and it generates the same error. For the SAP interface is connected correctly.
DI Server allows connect with SQL Server 2008?
Messagge:
<DatabaseServer>mv-05910a0046</DatabaseServer>
<DatabaseName>Prueba</DatabaseName>
<DatabaseType>dst_MSSQL2008</DatabaseType>
<DatabaseUsername>sa</DatabaseUsername>
<DatabasePassword>12345</DatabasePassword>
<CompanyUsername>manager</CompanyUsername>
<CompanyPassword>12345</CompanyPassword>
<Language>ln_English</Language>
<LicenseServer>mv-05910a0046:30000</LicenseServer>
Thanks
Edited by: Andres Naranjo on May 14, 2010 12:47 AM
Edited by: Andres Naranjo on May 14, 2010 3:56 PM
Edited by: Andres Naranjo on May 14, 2010 3:58 PMHad the same error
'The TAO NT Naming Service has stopped.'
Was using the external IP address for the LicenceServer - which is on the same server as SAP DIserver and B1WS.
I changed to using localhost:30000 and that solved the issue.
I suspect if I had used the internal IP it would have worked as well (ie the one you get from ipconfig) but as it works I'm not going to test that.
HTH -
ODBC function SQLDriverConnect() crashes with SQL Server 2008 R2
When calling the SQLDriverConnect() function from a 64-bit process and selecting a system DSN with a SQL Server Native Client 10.0 ODBC driver with SQL Server 2008 R2 SP3, then this call crashes here:
sqlncli10.dll!SNIMemRegion::Pop() + 0x77 bytes
sqlncli10.dll!SNIPacketAllocateEx2() + 0xa8 bytes
sqlncli10.dll!Np::ReadSync() + 0x7e bytes
sqlncli10.dll!Ssl::HandshakeReadToken() - 0x1b bytes
user32.dll!InternalDialogBox() + 0x132 bytes
user32.dll!DialogBoxIndirectParamAorW() + 0x56 bytes
user32.dll!DialogBoxParamW() + 0x85 bytes
sqlncli10.dll!SQLDriverConnectW() + 0x34f23 bytes
odbc32.dll!SQLInternalDriverConnectW() + 0x17c bytes
odbc32.dll!SQLDriverConnectW() + 0xa15b bytes
Am I calling SQLDriverConnect() correctly (see below)? Or is this a bug in the 64-bit version of the ODBC driver?
In the 32-bit version, everything works fine.
Here is a test program:
int _tmain(int argc, _TCHAR* argv[])
SQLHENV hEnv = NULL;
SQLHDBC hDbc = NULL;
SQLRETURN ret = SQLAllocHandle(SQL_HANDLE_ENV, SQL_NULL_HANDLE, &hEnv);
assert(ret == SQL_SUCCESS || ret == SQL_SUCCESS_WITH_INFO);
ret = SQLSetEnvAttr(hEnv, SQL_ATTR_ODBC_VERSION, (SQLPOINTER) SQL_OV_ODBC3, 0);
if (ret != SQL_SUCCESS && ret != SQL_SUCCESS_WITH_INFO)
fprintf(stderr, "SQLSetEnvAttr failed\r\n");
return EXIT_FAILURE;
ret = SQLAllocHandle(SQL_HANDLE_DBC, hEnv, &hDbc);
assert(ret == SQL_SUCCESS || ret == SQL_SUCCESS_WITH_INFO);
SQLTCHAR szConnection[2048];
SQLSMALLINT cbChars;
ret = SQLDriverConnect(hDbc, ::GetDesktopWindow(), (SQLTCHAR*) _T(""), SQL_NTS,
szConnection, _countof(szConnection)-1, &cbChars, SQL_DRIVER_PROMPT);
if (ret != SQL_SUCCESS && ret != SQL_SUCCESS_WITH_INFO && ret != SQL_NO_DATA)
fprintf(stderr, "SQLDriverConnect failed\r\n");
return EXIT_FAILURE;
else
fprintf(stdout, "Success\r\n");
return 0;
The stdafx.h contains the following includes:
#include "targetver.h"
#include <stdio.h>
#include <tchar.h>
#include <Windows.h>
#include <sql.h>
#include <sqlext.h>
#include <assert.h>
Steps to reproduce the crash: compile program with Visual Studio 2010 as 64-bit console application; run it and select a 64-bit SQL Server DSN.
If the crash does not occur, try using the "AllocationPreference" registry entry set to 0x100000 (see https://msdn.microsoft.com/en-us/library/windows/hardware/Dn613975%28v=vs.85%29.aspx for details); don't forget to reboot Windows. This registry
helps to find 64-bit portability issues.Hi T.holt,
Personally, I don’t believe SQL 2008 R2 with ADMT 3.2 is supported. From the guidelines of install the Active Directory Migration Tool (ADMT), ADMT v3.2 requires a preconfigured instance of SQL Server for its underlying data store. We
should use SQL Server Express and install ADMT v3.2 on a member server. ADMT installation enforces the following service pack requirements:
• SQL Server 2005 Express must be installed with Service Pack 3 (SP3) or later.
• SQL Server 2008 Express must be installed with Service Pack 1 (SP1) or later.
If you use full versions of SQL Server 2005 or SQL Server 2008. In this case, you need to install and run the ADMT console on a remote computer, and you can run multiple ADMT consoles on different remote computers. If
you use a full version of SQL Server, ADMT installation does not enforce any service pack requirements.
For more information about installing ADMT in the target domain, you can review the following article.http://technet.microsoft.com/en-us/library/cc974370(v=ws.10).aspx
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support -
Connection pooling with SQL Server 2008 and Tomcat 6.0
Hello Everybody,
I'm creating a web application using struts 2.0 , tomcat 6.0 and sql server 2008.
Everything works fine but i'm unable to create connection pooling with sql server 2008.Please help me to solve this issue.
Code for this is as foolows:
in my META-INF/context.xml
<?xml version="1.0" encoding="UTF-8"?>
<Context path="/spas" docBase="spas"
debug="5" reloadable="true" crossContext="true">
<Resource
name="jdbc/spas_new"
auth="Container"
type="javax.sql.DataSource"
maxActive="20"
maxIdle="10"
maxWait="-1"
user="spas_user"
password="spas123"
driverClassName="com.microsoft.sqlserver.jdbc.SQLServerDriver"
url="jdbc:sqlserver://HGL-0053\dbo:1433;databaseName=spas_new;responseBuffering=adaptive;"/>
</Context>
in my web.xml
<resource-ref>
<description>SQL Server Datasource</description>
<res-ref-name>jdbc/spas_new</res-ref-name>
<res-type>javax.sql.DataSource</res-type>
<res-auth>Container</res-auth>
</resource-ref>
and in my ConnectionThread.java file i've used:
Context ctx = new InitialContext();
if(ctx == null )
throw new Exception("Sorry! No Context Exception");
DataSource ds = (DataSource)ctx.lookup("java:/comp/env/jdbc/spas_new");
System.out.println("ds:"+ds);
conn=ds.getConnection();
Following is the exception:
org.apache.tomcat.dbcp.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Login failed for user ''.)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1225)
at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)
at login.V_SPAS_ConnectionThread.getConnection(V_SPAS_ConnectionThread.java:87)
at org.apache.jsp.login.v_005fspas_005flogin_005fpage_jsp._jspService(v_005fspas_005flogin_005fpage_jsp.java:95)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)
at org.apache.struts.action.RequestProcessor.doForward(RequestProcessor.java:1085)
at org.apache.struts.tiles.TilesRequestProcessor.doForward(TilesRequestProcessor.java:263)
at org.apache.struts.action.RequestProcessor.internalModuleRelativeForward(RequestProcessor.java:1023)
at org.apache.struts.tiles.TilesRequestProcessor.internalModuleRelativeForward(TilesRequestProcessor.java:345)
at org.apache.struts.action.RequestProcessor.processForward(RequestProcessor.java:572)
at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:221)
at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
at org.apache.struts.action.ActionServlet.doGet(ActionServlet.java:414)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.ApplicationDispatcher.invoke(ApplicationDispatcher.java:630)
at org.apache.catalina.core.ApplicationDispatcher.processRequest(ApplicationDispatcher.java:436)
at org.apache.catalina.core.ApplicationDispatcher.doForward(ApplicationDispatcher.java:374)
at org.apache.catalina.core.ApplicationDispatcher.forward(ApplicationDispatcher.java:302)
at org.apache.jasper.runtime.PageContextImpl.doForward(PageContextImpl.java:694)
at org.apache.jasper.runtime.PageContextImpl.forward(PageContextImpl.java:665)
at org.apache.jsp.index_jsp._jspService(index_jsp.java:54)
at org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:70)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:374)
at org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:337)
at org.apache.jasper.servlet.JspServlet.service(JspServlet.java:266)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at login.V_SPAS_SecurityCheckFilter.doFilter(V_SPAS_SecurityCheckFilter.java:108)
at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233)
at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102)
at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286)
at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583)
at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
at java.lang.Thread.run(Thread.java:619)
Caused by: com.microsoft.sqlserver.jdbc.SQLServerException: Login failed for user ''.Hi Karthikeyan,
This is not the issue at all. I can open the management studio by the same login id and password and also i can make the database jdbc connection from plain java file.
It does not give me any problem by them.
I'm unable to find the actual problem. May be i'm missing something in connection pooling.
Please help.
Regards
Mina -
IS ODI 10.1.3 compatible with SQL SERVER 2008?
Hi All,
Doews 10.1.3 work with sqlserver 2008? I have a sqljdbc4 driver listed in my driver folder, but I can't seem to get a connection when I am testing the connection.
ThanksDon't forget that ODI 10g has a bug in predefined connection string for SQL Server, and you'll need to check\correct it. We use ODI with SQL Server 2008, and everything is ok.
-
DeadLocks on Query Notifications with SQL Server 2008 SP3
Hello,
according to this article https://support.microsoft.com/kb/975090 the issue with deadlocks on query notifications should be fixed with SQL Server 2008 SP3 (10.0.5500.0). But we still get deadlocks in the following manner:
<resource-list>
<keylock hobtid="72057598393909248" dbid="5" objectname="MyDB.sys.query_notification_1411013420" indexname="cidx" id="lock1731c1f00" mode="RangeX-X" associatedObjectId="72057598393909248">
<owner-list>
<owner id="process573dc8" mode="RangeX-X"/>
</owner-list>
<waiter-list>
<waiter id="process58ddc8" mode="RangeS-U" requestType="wait"/>
</waiter-list>
</keylock>
<keylock hobtid="72057598372872192" dbid="5" objectname="MyDB.sys.query_notification_253437289" indexname="cidx" id="lock800c8780" mode="RangeS-U" associatedObjectId="72057598372872192">
<owner-list>
<owner id="process58ddc8" mode="RangeS-U"/>
</owner-list>
<waiter-list>
<waiter id="process573dc8" mode="RangeS-U" requestType="wait"/>
</waiter-list>
</keylock>
</resource-list>
Is there any need to install another fix?
Thanks in Advance!Hello,
SQL Server 2008 SP4 and all cumulative updates of SP3 do not have fixes related to deadlocks.
Maybe the following workarounds and solutions can help in your scenario.
http://stackoverflow.com/questions/3707137/understanding-deadlocks-with-sql-server-query-notifications
Deadlock Prevention. In case you need to lock multiple conversation groups in a transaction, you need to take the same order to lock the different conversation groups in all transactions, otherwise you will have a deadlock issues.
Source:
http://blogs.msdn.com/b/kangmo/archive/2008/12/17/a-brief-guide-on-sql-server-service-broker.aspx
Try to may transactions more simple and shorter.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com -
Add does not run with sql server 2008
Hi all,
My add on in the development environment does not run with SQL SERVER 2008. It ran well with SQL Server 2005 and sap b1 2207 B.
On executing the project file system throws an error "YOU ARE NOT CONNECTED TO THE COMPANY"
we are trying this scenario on a test machine where SAP B1 2007B with temporary license for one month and SQL server 2008
is installed.
Help needed.
Thanking you
PradnyaHi Use this
Dim i as integer
i=oCompany.Connect()
if i<> 0 Then
msgbox(ocompany.GetLastErrorDescription ())
end if
the you will get the error description also use try catch wherever necessary
Alternatively you can use
Dim SboGuiApi As SAPbouiCOM.SboGuiApi
Dim sConnectionString As String
Set SboGuiApi = New SAPbouiCOM.SboGuiApi
sConnectionString = Command
SboGuiApi.Connect sConnectionString
Set SBO_Application = SboGuiApi.GetApplication()
Set ocompany = New SAPbobsCOM.Company 'initialate DI company object
ocompany = SBO_Application.Company.GetDICompany
HTH,
Atul -
Vb6,adodb with sql server 2008
hi for i am new to vb6 with sql server 2008. I have managed to create database named : Tuscan77 in project folder with all the necessary tables with primary and foreign keys in tables. I have done the same project in vb6 with adodb with ms access and i have
finished it. But now based on my boss orders i have to connect vb6 with adodb with sql server 2008.
Now below is my code in mdi parent form in vb6 which i used to connect to database in access.:
Dim i As Integer
Dim AccessConnect As String
Dim dBOOL As Boolean
Dim dMstr As String
If (Left(App.Path, 1) = "\") Then
dMstr = Dir(App.Path & "tuscanDB.mdb")
Else
dMstr = Dir(App.Path & "\tuscanDB.mdb")
End If
dBOOL = IIf(dMstr = "", False, True)
If (dBOOL) Then
AccessConnect = "Driver={Microsoft Access Driver (*.mdb)};" & _
"Dbq=tuscanDB.mdb;" & _
"DefaultDir=" & App.Path & ";" & _
"Uid=Admin;Pwd=;"
If (adoDatabase.State <> 0) Then
adoDatabase.Close
End If
adoDatabase.ConnectionString = AccessConnect
adoDatabase.Open
Else
Dim mPath As String
CommonDialog1.CancelError = True
CommonDialog1.Flags = cdlOFNHideReadOnly + cdlOFNPathMustExist + cdlOFNFileMustExist
' Set filters
CommonDialog1.Filter = "All Files (*.*)|*.*|RTF (*.rtf)|*.rtf|Text Files (*.txt)|*.txt"
' Display the Save dialog box
CommonDialog1.FileName = ""
CommonDialog1.ShowOpen
dMstr = Dir(CommonDialog1.FileName)
mPath = Left(CommonDialog1.FileName, InStr(mPath, dMstr) - 2)
If (CommonDialog1.CancelError = False) Then
AccessConnect = "Driver={Microsoft Access Driver (*.mdb)};" & _
"Dbq=" & dMstr & ";" & _
"DefaultDir=" & mPath & ";" & _
"Uid=Admin;Pwd=;"
' Connection Object Methods
adoDatabase.ConnectionString = AccessConnect
adoDatabase.Open
End If
End If
where adoDatabase is name of my connection in vb6 with adodb with ms access.
Now how i connect vb6,adodb with sql server 2008?
Now my sql server 2008 details:
Server type: Database Engine
Server name: NPD-4\SQLEXPRESS
Authentication: Windows authentication
User name: NPD-4\TUSCANO
password:(it is left blank or not necessary)
Database name: Tuscan77
How to i connect my Database named Tuscan77 in vb6 and adodb.? Can anyone help me please.Any help or guidance would be greatly appreciated.Hi,
It would be more appropriate to post all your vb6 related queries in the below forums.
http://www.vbforums.com/forumdisplay.php?1-Visual-Basic-6-and-Earlier
http://forums.codeguru.com/forumdisplay.php?4-Visual-Basic-6-0-Programming
SRIRAM -
BI 7.3 delta extraction with SQL Server 2008
Hi experts,
I'm trying to extract data with delta update from a SQL Server with UD Connect, i test this ways:
Field DateTime in SQL Server: The problem is I only can delta within a day, no changes detected in the same day because SAP detects two fields here date and time, and can only can reference date field as a delta field.
Field TimesTamp in SQL Server: The problem seems the same, SAP recognize this as a date and time field.
Can any explain here the correct way for a delta implementation with SQL Server 2008? I would be very grateful.
Regards,Hi Fernando
That is what I need to do.
Create a Model from an existing SQL Server database with the Import data Dictionary option , be able to modify tables structures, extended properties in the model, and then sync those changes with the database.
So far I can't import the extended properties with DM 3.1.1. If you find a way , please let me know.
Thanks,
Jorge -
Database Mail not working with SQL Server Agent
I'm running SQL Server 2005 Standard edition 64 bit with SP2 on a 64 bit machine.
Database mail does not work with SQL Server Agent. When I configure SQL Server Agent to use database mail the test email button is greyed out and inactive therefore I cannot send emails using operators or for jub success failure etc.
I've read that there was supposed to be a fix for this with SP1 but I have SP2 and still receive the same problem. Please can somebody help as I do not wish to use SQL Mail as a work around due to this becomming redundant in future versions of SQL Server.
Kind RegardsThe problems solved
steps:
1)we create a mail profile at at Managment->Database Mail ,of SQL Managment
2)we set this account as "default" at Managment->Database Mail -> Configure Database Mail -> Manage profile security
3)At tab "Alert System" of SQL Server Agent properties , we check the "Enable mail profile" , Mail System=Database Mail, Mail profile = "the profile we already create"
4)we create a new operator at "Operators" of sql agent, where at "notification options" -> "Email name" we put the mail where we want to sent the agent the mails at failured job
5)We go at a specific job, at tab "Notifications" ,we check the "email" check box and then we choose the operator we just create, at the text box next to check box.
I hope not to forget something
Thank You all for the help -
Upgrade DTSX packages from VS 2010 with SQL Server 2008 to VS 2013 and SQL Server 2014
Hello everyone,
I’m very new to SSIS world. I’ve been assigned a task to upgrade the existing packages running in VS 2010 with SQL Server 2008 to VS 2013 and SQL Server 2014. And then submit the migration report to my client.
On very quick search at Google, I've found the following link. It seems like I just need to open the existing SSIS project in VS 2013 and follow the wizard.
https://msdn.microsoft.com/en-us/library/cc280547.aspx
Can anybody please advise, are there any other things need to be taken care while doing this up gradation process?
Please share your experience.
Any help would be much appreciated.
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.comHello Arthur,
Thank you for the response.
I just got an access of the packages. They are of VS 2008 and not 2010.
Do you know how to upgrade VS 2008 packaged to VS 2013?
When I tried to open the solution file in VS 2013, it says "incompatible".
Any help would be much appreciated.
Thanks,
Ankit
Thanks, <b>Ankit Shah</b> <hr> Inkey Solutions, India. <hr> Microsoft Certified Business Management Solutions Professionals <hr> http://ankit.inkeysolutions.com
Maybe you are looking for
-
U0095 Vendor performance report this report gives performance of supplier to se
Vendor performance report this report gives performance of supplier to send an order to customer
-
New to DVD authoring, I just upgraded to a SuperDrive in my old PowerMac. I notice that 8X blank DVD-R and DVD+R media is taking over all the store shelf space for blank DVDs. I also notice that some of them have prominent notices on the package to u
-
Okay, I'm not sure underplate is the right word: I'm putting together a design for a coffeemug. The mugs that we're printing on are blue, so they're going to print white onto the mug. So I've set up my logo and text as a spot white plate in InDesig
-
Metadata load - Invalid tree insertion point
Dear all, Does anyone know what this means? Invalid tree insertion point Show Details: Error Reference Number: {5ECBFF51-F653-48D6-811B-6AB494B42047};User Name: BConley@MSAD Num: 0x80042483;Type: 0;DTime: 10/19/2012 6:21:45 PM;Svr: TEPM-APP;File: CHs
-
Save for web & devices' Full page instead of content
I have updated from CS3 to CS5. When I save using "save to web & devices" it brings it up in full page rather than content size, which I am accustomed to in CS3. No, I do not have the artboard ticked in the export dialog box. I am at a loss, please