Back Ground job errors.

Hi,
we ve run the backgrnd job but it is giving errors that job is for generating orders for prices the orders were able to be generated in the foreground but all have list price validation errors eg like 2006416602. Can anyone tell me how to check these errors plz.
Thanks in advance.

You can have the errors associated with the background job in the Job log. For displaying the detailed error message highlight the error line in the job log and click on the long text push button on the application tool bar. This will display the detailed error message associated with the error it will even display the associated dump if any.
Hope this helps.

Similar Messages

Back ground job error ABAP/4 processor: CONVT_OVERFLOW

Hi all,
i getting the error ABAP/4 processor: CONVT_OVERFLOW while executing the Zprogram(custom) in background.
This background job is failed at move statement.
what may cause this error?
please help me regarding this issue>
thanks in advance.

Hi PR ,
check ST22 , in that ananlysis screen see for the arrow make from where dump is tiggered .
so here u have to look in.
this error comes when there is type miss match.
Regards
Peram

Error while activating ODS is not caught in the back ground job..

Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumar

Hi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly

Submit Back ground job with error log

Hi Gurus
Can anyone help with Back ground job with error log. i want put all the error logs in to 1 internal table and submit the back ground .how can i do that .please help me

Hi reddy ,
i am not experienced this in real scenarion .. even though i would like to give my idea
Put your logic inside the FM and execute in in background task mode on your action button .
call function 'Function module name' in background task
exporting
parameter =
importing
ret =
refer the below link for more detail on executing FM as background task
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/8f/53b67ad30be445b0ccc968d69bc6ff/frameset.htm
Regards
Chinnaiya P

Error while using Back ground Job for Planning function in BPS

I have created FM and Program for scdualing Back ground Job for Planning function.
I have created Planning function with exit option and passed parameter Global seqence name.
Error is lot of Jobs are creating while exe in BPS0
Kindly help me the same
Regards
GR

Hi Rama,
It seems there are two diff. functional modules (UPC_BUNDLE_EXECUTE AND UPC_BUNDLE_EXECUTE_STEP). The second one divides the planning sequesces on the basis of something you specify (e.g. company code). Just make sure that you are using correct FM.
just a thought.......
Regards,
SK

Back ground job schduling

hai experts ,
iam write report upload data from excell file and posting tcode mb31 by useing bapi.
but i schdule back ground job   results come cancelled.
error is like .
   job started                                                                00                     516       s
step started001 (varient ,user id sapadmin)             00                    550      s
error during import of clipboard content                   alsmex              037       a
job cancelled                                                               00                   518       a
thanks in advance.

The dump suggests that your report use a clipboard GUI functionality in background, so i fear there are very few chance of success (Usage of ALSM_EXCEL_TO_INTERNAL_TABLE which call CLPB_IMPORT or CL_GUI_FRONTEND_SERVICES->CLIPBOARD_IMPORT in background ?)
Perform some search at sdn with keywords Excel, upload and Background in [forums|http://forums.sdn.sap.com/search.jspa?threadID=&q=ExcelBackgroundupload&objID=&dateRange=last90days&numResults=15&rankBy=10001] and [wiki|http://wiki.sdn.sap.com/wiki/dosearchsite.action?searchQuery.queryString=ExcelBackgroundupload&searchQuery.spaceKey=conf_global].
Regards,
Raymond

Back ground job bdc session

Hai All,
Can any one tell me how to catch the erros in BDC session method back ground job.
I need to update Sales orders in BDC session, back ground job.
Finally at the end I need to generate a report which contains all the succesfull updates & errors.
I tried this using call transaction with messtab and is working fine.
Please tell me how to do this in Session method.
Thanks & Regards,
Bhaskar.

Hi Bhaskar,
In Session method what you need to do is before processing of hte BDC first you need to check all the data. And if any error found then populate it into the internal table. And that internal table you need to display it on the output......
I think this is the solution but I am not to sure........
&********Reward Point if helpful*******&

How to analyse Back Ground Jobs in BI

Hi,
How to analyse Back Ground Jobs in BI
RSDB2MA1 and RSDB2MA2
My requirment is to check the error logs for these job
How to navigate there
Thanks

Dear BW user,
Sm37 and sm50/51
1)Go to Sm37
2) Give the job name and in user give as *
3)press execute or f8
4) Press job log in the screen..keep refreshing it for update
5)Press job detaisl..get pid no and wp no..in it
6) go to sm50/51
check for given wp no... and pid no..job is running or waiting or not
sm66
1)go to sm66
2)in sm66 you can see only the central instance job running in
3)You cant find any application server in it
Hope it helps you,Revert me back if you have any queries
Assign points if helpful
Regards
Bala

Create Back ground job for data recieved from a legacy system

Hi All,
I have a requirement where i need to schedule a back ground job once a proxy is triggered for the address data sent from a Legacy system. This proxy is triggerred from SAP PI, then i need to create a job shedule where address data is created as BP's(Business Partners) and assigned to a already created Target Group. Then once the Target group is completed with all BP needs to assigned to aCampaign Id. As the data is large it takes lot of time to execute. Please Advice.
Regards,
Nagesh Thanneeru

Hi
If you can divide the data into two internal tables and later collect into the one internal table, this could solve yuor problem.
Also you need to make sure that enough memory is available in the system. Check DB6cockpit for that.
Also there are a lot of correction notes available with SAP for the error"TSV_TNEW_BLOCKS_NO_ROLL_MEMORY"
Check what the job exactly does, and search for the relevant notes, as there are different notes for different application areas...
if its a loading job(Infopackage) you can reduce the data packet size of the IP, but that might hamper the loading performance.
Hope this helps
Regards
Shilpa

How To Handle With Back Ground JOB From WEBUI When Click On "Appove"

Hi
How To Scheduled A Job Through ABAP Report In back end Of CRM when i click on "Approve" Button in WEBUI From result list.
As per My requirement I have a Search View and Result View
In Search View I have Below Fields
ITC Vendor ID
Claim Status
User status (date status changed)
Model
Serial Number
Date completed of Service Completion
Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
In the Result View I need to Add one Button As "Approve"
When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
"Approve Claim Job Has Started In Background
Note: Only Claims Which are in Submitted Status Will be Approved. you May Close This Window"
In SAP CRM System Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
In the Back Ground ABAP Report which will validate based on Result List Records"
In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
I need to collect all records from Result list and validate Those Records who's Status in "Submitted
1)Sort all the claims based on ITC Vendor ID.
2)Grouped all the submitted claims against each ITC Vendor ID from the search result
3)Change the status of the selected submitted claims to Approved.
4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
5)Sending Email to each IRC.
6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
7)Store the file in the Application Server AL11 in .csv format
Please Find Attachement For Reference.
1)ITC Claim Screen Shot
2)Screen Shot For Attachment
Thanks
Raj

Hi,
You can add the following code in on approve method to show popup to the user,
IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
    REFRESH lt_buttons.
    lss_button-id = 'btnyes'.
    lss_button-text = 'YES'.
    lss_button-on_click = 'YES'.
    APPEND lss_button TO lt_buttons.
    CLEAR lss_button.
    lss_button-id = 'btnno'.
    lss_button-text = 'NO'.
    lss_button-on_click = 'NO'.
    APPEND lss_button TO lt_buttons.
    CLEAR lss_button.
    CALL METHOD comp_controller->window_manager->create_popup_2_confirm
      EXPORTING
        iv_title          = 'ATTENTION'
        iv_text           = 'Are you sure you want to edit this document?'
        iv_btncombination = '99'
        iv_custombuttons = lt_buttons
      RECEIVING
        rv_result         = req_edit.
    req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
    req_edit->open( ).
    RETURN.
ELSE.
    lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
    lv_outbound = lr_node->get_event_name( ).
* CLEAR ptc_pricing_status.
*    lv_outbound = req_edit->get_fired_outbound_plug( ).
    IF lv_outbound = 'YES'.
you can use the submit report code here and you can al the validations here
    ELSE. " No
if user clicks no nothing to do..
    ENDIF.
    CLEAR req_edit.
ENDIF.
Best Regards,
Dharmakasi.

How to find the back ground job details

Hi All,
   I have a back ground job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
           Please informe me how to check this.
Thanks & Regards,
Muralikrishna

On SM37 screen there is plenty of options are there:
This is what i got from SAP help
Explanation for each selection field:
o   Jobname: Name of the job as an identifier.
o   Username: Name of the user who designed and planned the job.
o   Start date: The start condition of the job, which could be a time
frame or an event that the job is waiting for. Specifying both will
yield jobs whose starting condition is either of the two
conditions.
ABAP program step: Name of an ABAP program that acts as a step in a
job.
Status selection: The current status of the job. By default, the
SCHEDULED option is not marked. To see the scheduled jobs, you must
explicitly check this.
also give the proper values in Job Satus also.

Scheduling Back Ground job

Hi All,
I need to schedule a daily background job for MB52 transaction and need to save the output of MB52 in a specified directory .
Can any one tell me whether it is possible to save back ground job output in specified directory?
Thanks & Regards
k.Nirmala

Hi Nirmala,
Set up variant at MB52 transaction and use SM37 and Sm36 transaction to schedule job.
Define job at Sm36 and use program - RM07MLBS and use your variant.
schedule job and set up time and date for periodcally.
and it will run and you can see the status at SM37 Transaction .
the background job will create spool and which will contain your output.
if you want to download your output ,then you need to write custom program to get spool information from TSP01 table and use open dataset command to down load specifi directory.
Reward Points if it is helpful
Thanks
Seshu

Back ground job problem

hi every one,
pls help me out in this.
i have written a program to create a wbs element.as it takes 20 to 30 min to create one element in production.in my program, there is part of code which creates wbs elements.
so i want to run tht part of code in background.
only part of code.
even i did the coding for it. i wrote a new program and i pasted that part of code in new program.
and this new program i m submitting in old one by creating a back ground job.
i m exporting few required internal tables for new report.i hav imported all internal tables in new report also..
but still this importing exporting is not happening..pls
tell me wat can be the problem..
thanks..

Your code is not optimized according to performance,can you sed me your code ...
see my business card for my id.
Thanks

Max no of lines appear in the back ground job out put

Dear All,
Please help me to solve following query,
I am execution ME2N report in background. There are more then 100000 line item in the out put. However only 5000 line appear in the output of background job.
Is there any setting in sap, where i can change the max no of out put is more then 100000 in back ground job?
Your earlier answer should be highly appreciated?
Regds,
sp sahu

Click on the settings button and choose the 'The last' radio button for dispaly area and put in 10 pages.
Sometimes just clicking on the Last page button on the Tool bar will do the trick

How to download the application file to local file by back ground job?

hi:
can any one tell me how to download the application file to local file by back ground job? thanks in advance..
Monson

Hi,
In order to download a file from application layer to a local file in background,
first write a report(ZREPORT1) in which do the following steps:
OPEN DATASET g_file_1 FOR INPUT IN TEXT MODE ENCODING DEFAULT.
loop the g_file and append all the data into another internal table.
end of this report you shd have all the data in the application layer file into your internal table.
Now create another report(ZREPORT2) and submit this report in background.
that is,
JOB_OPEN
JOB_SUBMIT and
JOB_CLOSE
and in job_submit submit ZREPORT1 which downloads the file in application layer.
Please reward points if helpful.
Regards,
Arul.

Back Ground job errors.

Similar Messages

Maybe you are looking for