Back ground job error ABAP/4 processor: CONVT_OVERFLOW
Hi all,
i getting the error ABAP/4 processor: CONVT_OVERFLOW while executing the Zprogram(custom) in background.
This background job is failed at move statement.
what may cause this error?
please help me regarding this issue>
thanks in advance.
Hi PR ,
check ST22 , in that ananlysis screen see for the arrow make from where dump is tiggered .
so here u have to look in.
this error comes when there is type miss match.
Regards
Peram
Similar Messages
-
Dear abapers i want to send an excel attachment from my computer to email and i do that using the following code it works correctly but now i want the program to run in back ground twice a month to some ones email address by giving default recipient email address.
with best regards,
Hahu D.
REPORT YEMAIL12.
data method1 like sy-ucomm.
data g_user like soudnamei1.
data g_user_data like soudatai1.
data g_owner like soud-usrnam.
data g_receipients like soos1 occurs 0 with header line.
data g_document like sood4 .
data g_header like sood2.
data g_folmam like sofm2.
data g_objcnt like soli occurs 0 with header line.
data g_objhead like soli occurs 0 with header line.
data g_objpara like selc occurs 0 with header line.
data g_objparb like soop1 occurs 0 with header line.
data g_attachments like sood5 occurs 0 with header line.
data g_references like soxrl occurs 0 with header line.
data g_authority like sofa-usracc.
data g_ref_document like sood4.
data g_new_parent like soodk.
data: begin of g_files occurs 10 ,
text(4096) type c,
end of g_files.
data : fold_number(12) type c,
fold_yr(2) type c,
fold_type(3) type c.
parameters ws_file type rlgrap-filename default 'd:\files\file1.xlsx'.
* Can me any file fromyour pc ....either xls or word or ppt etc ...
g_user-sapname = sy-uname.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR ws_file.
CALL FUNCTION 'F4_FILENAME'
EXPORTING
* PROGRAM_NAME = SYST-CPROG
* DYNPRO_NUMBER = SYST-DYNNR
field_name = 'ws_file'
IMPORTING
file_name = ws_file.
call function 'SO_USER_READ_API1'
exporting
user = g_user
* PREPARE_FOR_FOLDER_ACCESS = ' '
importing
user_data = g_user_data
* EXCEPTIONS
* USER_NOT_EXIST = 1
* PARAMETER_ERROR = 2
* X_ERROR = 3
* OTHERS = 4
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
fold_type = g_user_data-outboxfol+0(3).
fold_yr = g_user_data-outboxfol+3(2).
fold_number = g_user_data-outboxfol+5(12).
clear g_files.
refresh : g_objcnt,
g_objhead,
g_objpara,
g_objparb,
g_receipients,
g_attachments,
g_references,
g_files.
method1 = 'SAVE'.
g_document-foltp = fold_type.
g_document-folyr = fold_yr.
g_document-folno = fold_number.
g_document-objtp = g_user_data-object_typ.
*g_document-OBJYR = '27'.
*g_document-OBJNO = '000000002365'.
*g_document-OBJNAM = 'MESSAGE'.
g_document-objdes = 'hahu daily test this'.
g_document-folrg = 'O'.
*g_document-okcode = 'CHNG'.
g_document-objlen = '0'.
g_document-file_ext = 'TXT'.
g_header-objdes = 'hahu daily fishikta ameley'.
g_header-file_ext = 'TXT'.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = sy-uname
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
* FOLMEM_DATA =
* RECEIVE_DATA =
* File from the pc to send...
method1 = 'ATTCREATEFROMPC'.
g_files-text = ws_file.
append g_files.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header
method1 = 'SEND'.
g_receipients-recnam = 'MK085'.
g_receipients-recesc = 'B'.
g_receipients-sndex = 'X'.
append g_receipients.
call function 'SO_DOCUMENT_REPOSITORY_MANAGER'
exporting
method = method1
office_user = g_owner
ref_document = g_ref_document
new_parent = g_new_parent
importing
authority = g_authority
tables
objcont = g_objcnt
objhead = g_objhead
objpara = g_objpara
objparb = g_objparb
recipients = g_receipients
attachments = g_attachments
references = g_references
files = g_files
changing
document = g_document
header_data = g_header.
*-- End of ProgramHi,
Will this help you.?
http://scn.sap.com/community/netweaver-administrator/blog/2010/02/25/how-to-email-output-from-background-jobs
Regards
Purnand -
Back Ground job errors.
Hi,
we ve run the backgrnd job but it is giving errors that job is for generating orders for prices the orders were able to be generated in the foreground but all have list price validation errors eg like 2006416602. Can anyone tell me how to check these errors plz.
Thanks in advance.You can have the errors associated with the background job in the Job log. For displaying the detailed error message highlight the error line in the job log and click on the long text push button on the application tool bar. This will display the detailed error message associated with the error it will even display the associated dump if any.
Hope this helps. -
Error while activating ODS is not caught in the back ground job..
Hi All,
We have a back ground job to load data to ODS and to activate it..If there is any error while loading or activating the data, back ground job is going into loop instead of cancelling the job..As the job is going into loop we are unable to trace the error unless we cancel the job manually and checking it..We have switched off displaying any messages while doing the back ground job...also we can not set any time limit for the job as it always depends on the volume of the data.
My requirement is , back ground job must get cancelled if there is any error while loading the ODS..Can anybody suggest any idea on this..
Thanks for reading.
Umamaheswar kumarHi Uma,
A few hints for running and schedule and monitoring process chains:
- always schedule the process chain in tcode RSPC
- check the log in RSPC for error messages, or
- check BW monitor for the ODS concerned (tcode RSMO, tab Details)
if anything is not working fine, the status of the corresponding load will show you the errors, warnings ...
either in RSPC - log or RSMO.
hope it helps.
Regards,
Lilly -
How to reschedule a Back ground job in Normal ABAP from Web Dyn Pro abap application??
Hi Experts,
How to reschedule a Back ground job in Normal ABAP from Web Dyn Pro abap application??Can you give us some more information? Background jobs primarily don't have anything to do with Webdynpro.
-
Submit Back ground job with error log
Hi Gurus
Can anyone help with Back ground job with error log. i want put all the error logs in to 1 internal table and submit the back ground .how can i do that .please help meHi reddy ,
i am not experienced this in real scenarion .. even though i would like to give my idea
Put your logic inside the FM and execute in in background task mode on your action button .
call function 'Function module name' in background task
exporting
parameter =
importing
ret =
refer the below link for more detail on executing FM as background task
http://help.sap.com/saphelp_nw70ehp1/helpdata/en/8f/53b67ad30be445b0ccc968d69bc6ff/frameset.htm
Regards
Chinnaiya P -
Error while using Back ground Job for Planning function in BPS
I have created FM and Program for scdualing Back ground Job for Planning function.
I have created Planning function with exit option and passed parameter Global seqence name.
Error is lot of Jobs are creating while exe in BPS0
Kindly help me the same
Regards
GRHi Rama,
It seems there are two diff. functional modules (UPC_BUNDLE_EXECUTE AND UPC_BUNDLE_EXECUTE_STEP). The second one divides the planning sequesces on the basis of something you specify (e.g. company code). Just make sure that you are using correct FM.
just a thought.......
Regards,
SK -
The back ground job gets cancelled which feds the delta queue?
Hi all,
I can see the delta is empty for the 2lis_11_vahdr ( sales order header datasource) when i happened to check the background job name which feds the delta queue, all the background job gets failed for the same!!
Can anyone let me know what needs to be carried out ?
Thankshi,
when i happened to check the logs for that back ground job i got the below message
Extraction queue processing started MCEX11 with 54,331 LUWs
ABAP/4 processor: CALL_FUNCTION_NOT_FOUND''
Thanks -
How To Handle With Back Ground JOB From WEBUI When Click On "Appove"
Hi
How To Scheduled A Job Through ABAP Report In back end Of CRM when i click on "Approve" Button in WEBUI From result list.
As per My requirement I have a Search View and Result View
In Search View I have Below Fields
ITC Vendor ID
Claim Status
User status (date status changed)
Model
Serial Number
Date completed of Service Completion
Based on Search Criteria I will get Result In Result View.(Suppose 10 Records I got In Result View)
In the Result View I need to Add one Button As "Approve"
When i Click On Approve button One Pop up Message Need to Open And In that popup window I need to Display Below Text
"Approve Claim Job Has Started In Background
Note: Only Claims Which are in Submitted Status Will be Approved. you May Close This Window"
In SAP CRM System Back Ground Job Need To Start When Click On "Approve" Button In WEBUI .
In the Back Ground ABAP Report which will validate based on Result List Records"
In the Result List we may have all types of Claims which are status in "Submitted" "Pending" "Rejected" "Approve".
I need to collect all records from Result list and validate Those Records who's Status in "Submitted
1)Sort all the claims based on ITC Vendor ID.
2)Grouped all the submitted claims against each ITC Vendor ID from the search result
3)Change the status of the selected submitted claims to Approved.
4)Displays information messages as mentioned whenever a claim is approved, the same message will be captured in the job log.
‘Claims <ClaimID 1>,…<ClaimID N> now approved for ITC Vendor ID’.
5)Sending Email to each IRC.
6)Capture all the approved claims in the below format (Format Attached "Screen Shot Attachment")
7)Store the file in the Application Server AL11 in .csv format
Please Find Attachement For Reference.
1)ITC Claim Screen Shot
2)Screen Shot For Attachment
Thanks
RajHi,
You can add the following code in on approve method to show popup to the user,
IF req_edit IS NOT BOUND. " gloabl attribute in impl class of the view
REFRESH lt_buttons.
lss_button-id = 'btnyes'.
lss_button-text = 'YES'.
lss_button-on_click = 'YES'.
APPEND lss_button TO lt_buttons.
CLEAR lss_button.
lss_button-id = 'btnno'.
lss_button-text = 'NO'.
lss_button-on_click = 'NO'.
APPEND lss_button TO lt_buttons.
CLEAR lss_button.
CALL METHOD comp_controller->window_manager->create_popup_2_confirm
EXPORTING
iv_title = 'ATTENTION'
iv_text = 'Are you sure you want to edit this document?'
iv_btncombination = '99'
iv_custombuttons = lt_buttons
RECEIVING
rv_result = req_edit.
req_edit->set_on_close_event( iv_event_name = 'EDIT' iv_view = me ). "#EC NOTEXT
req_edit->open( ).
RETURN.
ELSE.
lr_node ?= req_edit->get_context_node( 'OUTPUTNODE' ).
lv_outbound = lr_node->get_event_name( ).
* CLEAR ptc_pricing_status.
* lv_outbound = req_edit->get_fired_outbound_plug( ).
IF lv_outbound = 'YES'.
you can use the submit report code here and you can al the validations here
ELSE. " No
if user clicks no nothing to do..
ENDIF.
CLEAR req_edit.
ENDIF.
Best Regards,
Dharmakasi. -
How to find the back ground job details
Hi All,
I have a back ground job running from many days, now we would like to know when this job was created on what date this job actvlly created and schuduled.
Please informe me how to check this.
Thanks & Regards,
MuralikrishnaOn SM37 screen there is plenty of options are there:
This is what i got from SAP help
Explanation for each selection field:
o Jobname: Name of the job as an identifier.
o Username: Name of the user who designed and planned the job.
o Start date: The start condition of the job, which could be a time
frame or an event that the job is waiting for. Specifying both will
yield jobs whose starting condition is either of the two
conditions.
ABAP program step: Name of an ABAP program that acts as a step in a
job.
Status selection: The current status of the job. By default, the
SCHEDULED option is not marked. To see the scheduled jobs, you must
explicitly check this.
also give the proper values in Job Satus also. -
CAN ANY BODY TELL ME WHAT IS A BACK GROUND JOB WORK IN MM pls explain it with good example tell me 1 or 2back ground job work relevent transactions
good answer will be awarded
kiranHi,
Background job means system will automatically perform some transaction / actions at perdetermined time based on the variants selected for that program.
Ex 1: You want to see the list of PO or PR or Production order created for a day, you can create a ABAP program and give the creation date in selction screen.
Provide the Plant or doc type, file path to download the report etc..
and save the variant.
You can set this program to run during mid night( 11.00 p.m) with the sysytem date (crrent date).
So system will run this program and extract the report in Application server level as per the file location given in the program selection screen.
Ex 2:
MRP program
Ex 3.
Auto PO creation program
Thanks,
Kumar Arcot -
hai experts ,
iam write report upload data from excell file and posting tcode mb31 by useing bapi.
but i schdule back ground job results come cancelled.
error is like .
job started 00 516 s
step started001 (varient ,user id sapadmin) 00 550 s
error during import of clipboard content alsmex 037 a
job cancelled 00 518 a
thanks in advance.The dump suggests that your report use a clipboard GUI functionality in background, so i fear there are very few chance of success (Usage of ALSM_EXCEL_TO_INTERNAL_TABLE which call CLPB_IMPORT or CL_GUI_FRONTEND_SERVICES->CLIPBOARD_IMPORT in background ?)
Perform some search at sdn with keywords Excel, upload and Background in [forums|http://forums.sdn.sap.com/search.jspa?threadID=&q=ExcelBackgroundupload&objID=&dateRange=last90days&numResults=15&rankBy=10001] and [wiki|http://wiki.sdn.sap.com/wiki/dosearchsite.action?searchQuery.queryString=ExcelBackgroundupload&searchQuery.spaceKey=conf_global].
Regards,
Raymond -
Back ground job - report, is scheduled 49 hrs ago, still ACTIVE??
Hi Experts,
Pls. clarify one of my simple doubt that, Weather a report(which has only one SELECT statement, with key in WHERE clause) wuld take 49 hours to execute? bcoz, I scheduled a back ground job for my_report, 49 hours ago, its still ACTIVE, OR does it went to infinitive loop?
thanqHi
no one select query won't take that mucj of time
may be that program went in infinite loop
please check with that
reward if useful
<b>below is the best way to write a select query</b>
Ways of Performance Tuning
1. Selection Criteria
2. Select Statements
Select Queries
SQL Interface
Aggregate Functions
For all Entries
Select Over more than one Internal table
Selection Criteria
1. Restrict the data to the selection criteria itself, rather than filtering it out using the ABAP code using CHECK statement.
2. Select with selection list.
Points # 1/2
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
Select Statements Select Queries
1. Avoid nested selects
2. Select all the records in a single shot using into table clause of select statement rather than to use Append statements.
3. When a base table has multiple indices, the where clause should be in the order of the index, either a primary or a secondary index.
4. For testing existence , use Select.. Up to 1 rows statement instead of a Select-Endselect-loop with an Exit.
5. Use Select Single if all primary key fields are supplied in the Where condition .
Point # 1
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
FROM EKKO AS P INNER JOIN EKAN AS F
ON PEBELN = FEBELN.
Note: A simple SELECT loop is a single database access whose result is passed to the ABAP program line by line. Nested SELECT loops mean that the number of accesses in the inner loop is multiplied by the number of accesses in the outer loop. One should therefore use nested SELECT loops only if the selection in the outer loop contains very few lines or the outer loop is a SELECT SINGLE statement.
Point # 2
SELECT * FROM SBOOK INTO SBOOK_WA.
CHECK: SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
ENDSELECT.
The above code can be much more optimized by the code written below which avoids CHECK, selects with selection list and puts the data in one shot using into table
SELECT CARRID CONNID FLDATE BOOKID FROM SBOOK INTO TABLE T_SBOOK
WHERE SBOOK_WA-CARRID = 'LH' AND
SBOOK_WA-CONNID = '0400'.
Point # 3
To choose an index, the optimizer checks the field names specified in the where clause and then uses an index that has the same order of the fields . In certain scenarios, it is advisable to check whether a new index can speed up the performance of a program. This will come handy in programs that access data from the finance tables.
Point # 4
SELECT * FROM SBOOK INTO SBOOK_WA
UP TO 1 ROWS
WHERE CARRID = 'LH'.
ENDSELECT.
The above code is more optimized as compared to the code mentioned below for testing existence of a record.
SELECT * FROM SBOOK INTO SBOOK_WA
WHERE CARRID = 'LH'.
EXIT.
ENDSELECT.
Point # 5
If all primary key fields are supplied in the Where condition you can even use Select Single.
Select Single requires one communication with the database system, whereas Select-Endselect needs two.
Select Statements contd.. SQL Interface
1. Use column updates instead of single-row updates
to update your database tables.
2. For all frequently used Select statements, try to use an index.
3. Using buffered tables improves the performance considerably.
Point # 1
SELECT * FROM SFLIGHT INTO SFLIGHT_WA.
SFLIGHT_WA-SEATSOCC =
SFLIGHT_WA-SEATSOCC - 1.
UPDATE SFLIGHT FROM SFLIGHT_WA.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
UPDATE SFLIGHT
SET SEATSOCC = SEATSOCC - 1.
Point # 2
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE CARRID = 'LH'
AND CONNID = '0400'.
ENDSELECT.
The above mentioned code can be more optimized by using the following code
SELECT * FROM SBOOK CLIENT SPECIFIED INTO SBOOK_WA
WHERE MANDT IN ( SELECT MANDT FROM T000 )
AND CARRID = 'LH'
AND CONNID = '0400'.
ENDSELECT.
Point # 3
Bypassing the buffer increases the network considerably
SELECT SINGLE * FROM T100 INTO T100_WA
BYPASSING BUFFER
WHERE SPRSL = 'D'
AND ARBGB = '00'
AND MSGNR = '999'.
The above mentioned code can be more optimized by using the following code
SELECT SINGLE * FROM T100 INTO T100_WA
WHERE SPRSL = 'D'
AND ARBGB = '00'
AND MSGNR = '999'.
Select Statements contd Aggregate Functions
If you want to find the maximum, minimum, sum and average value or the count of a database column, use a select list with aggregate functions instead of computing the aggregates yourself.
Some of the Aggregate functions allowed in SAP are MAX, MIN, AVG, SUM, COUNT, COUNT( * )
Consider the following extract.
Maxno = 0.
Select * from zflight where airln = LF and cntry = IN.
Check zflight-fligh > maxno.
Maxno = zflight-fligh.
Endselect.
The above mentioned code can be much more optimized by using the following code.
Select max( fligh ) from zflight into maxno where airln = LF and cntry = IN.
Select Statements contd For All Entries
The for all entries creates a where clause, where all the entries in the driver table are combined with OR. If the number of entries in the driver table is larger than rsdb/max_blocking_factor, several similar SQL statements are executed to limit the length of the WHERE clause.
The plus
Large amount of data
Mixing processing and reading of data
Fast internal reprocessing of data
Fast
The Minus
Difficult to program/understand
Memory could be critical (use FREE or PACKAGE size)
Points to be must considered FOR ALL ENTRIES
Check that data is present in the driver table
Sorting the driver table
Removing duplicates from the driver table
Consider the following piece of extract
Loop at int_cntry.
Select single * from zfligh into int_fligh
where cntry = int_cntry-cntry.
Append int_fligh.
Endloop.
The above mentioned can be more optimized by using the following code.
Sort int_cntry by cntry.
Delete adjacent duplicates from int_cntry.
If NOT int_cntry[] is INITIAL.
Select * from zfligh appending table int_fligh
For all entries in int_cntry
Where cntry = int_cntry-cntry.
Endif.
Select Statements contd Select Over more than one Internal table
1. Its better to use a views instead of nested Select statements.
2. To read data from several logically connected tables use a join instead of nested Select statements. Joins are preferred only if all the primary key are available in WHERE clause for the tables that are joined. If the primary keys are not provided in join the Joining of tables itself takes time.
3. Instead of using nested Select loops it is often better to use subqueries.
Point # 1
SELECT * FROM DD01L INTO DD01L_WA
WHERE DOMNAME LIKE 'CHAR%'
AND AS4LOCAL = 'A'.
SELECT SINGLE * FROM DD01T INTO DD01T_WA
WHERE DOMNAME = DD01L_WA-DOMNAME
AND AS4LOCAL = 'A'
AND AS4VERS = DD01L_WA-AS4VERS
AND DDLANGUAGE = SY-LANGU.
ENDSELECT.
The above code can be more optimized by extracting all the data from view DD01V_WA
SELECT * FROM DD01V INTO DD01V_WA
WHERE DOMNAME LIKE 'CHAR%'
AND DDLANGUAGE = SY-LANGU.
ENDSELECT
Point # 2
SELECT * FROM EKKO INTO EKKO_WA.
SELECT * FROM EKAN INTO EKAN_WA
WHERE EBELN = EKKO_WA-EBELN.
ENDSELECT.
ENDSELECT.
The above code can be much more optimized by the code written below.
SELECT PF1 PF2 FF3 FF4 INTO TABLE ITAB
FROM EKKO AS P INNER JOIN EKAN AS F
ON PEBELN = FEBELN.
Point # 3
SELECT * FROM SPFLI
INTO TABLE T_SPFLI
WHERE CITYFROM = 'FRANKFURT'
AND CITYTO = 'NEW YORK'.
SELECT * FROM SFLIGHT AS F
INTO SFLIGHT_WA
FOR ALL ENTRIES IN T_SPFLI
WHERE SEATSOCC < F~SEATSMAX
AND CARRID = T_SPFLI-CARRID
AND CONNID = T_SPFLI-CONNID
AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
The above mentioned code can be even more optimized by using subqueries instead of for all entries.
SELECT * FROM SFLIGHT AS F INTO SFLIGHT_WA
WHERE SEATSOCC < F~SEATSMAX
AND EXISTS ( SELECT * FROM SPFLI
WHERE CARRID = F~CARRID
AND CONNID = F~CONNID
AND CITYFROM = 'FRANKFURT'
AND CITYTO = 'NEW YORK' )
AND FLDATE BETWEEN '19990101' AND '19990331'.
ENDSELECT.
1. Table operations should be done using explicit work areas rather than via header lines.
2. Always try to use binary search instead of linear search. But dont forget to sort your internal table before that.
3. A dynamic key access is slower than a static one, since the key specification must be evaluated at runtime.
4. A binary search using secondary index takes considerably less time.
5. LOOP ... WHERE is faster than LOOP/CHECK because LOOP ... WHERE evaluates the specified condition internally.
6. Modifying selected components using MODIFY itab TRANSPORTING f1 f2.. accelerates the task of updating a line of an internal table.
Point # 2
READ TABLE ITAB INTO WA WITH KEY K = 'X BINARY SEARCH.
IS MUCH FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY K = 'X'.
If TAB has n entries, linear search runs in O( n ) time, whereas binary search takes only O( log2( n ) ).
Point # 3
READ TABLE ITAB INTO WA WITH KEY K = 'X'. IS FASTER THAN USING
READ TABLE ITAB INTO WA WITH KEY (NAME) = 'X'.
Point # 5
LOOP AT ITAB INTO WA WHERE K = 'X'.
ENDLOOP.
The above code is much faster than using
LOOP AT ITAB INTO WA.
CHECK WA-K = 'X'.
ENDLOOP.
Point # 6
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1 TRANSPORTING DATE.
The above code is more optimized as compared to
WA-DATE = SY-DATUM.
MODIFY ITAB FROM WA INDEX 1.
7. Accessing the table entries directly in a "LOOP ... ASSIGNING ..." accelerates the task of updating a set of lines of an internal table considerably
8. If collect semantics is required, it is always better to use to COLLECT rather than READ BINARY and then ADD.
9. "APPEND LINES OF itab1 TO itab2" accelerates the task of appending a table to another table considerably as compared to LOOP-APPEND-ENDLOOP.
10. DELETE ADJACENT DUPLICATES accelerates the task of deleting duplicate entries considerably as compared to READ-LOOP-DELETE-ENDLOOP.
11. "DELETE itab FROM ... TO ..." accelerates the task of deleting a sequence of lines considerably as compared to DO -DELETE-ENDDO.
Point # 7
Modifying selected components only makes the program faster as compared to Modifying all lines completely.
e.g,
LOOP AT ITAB ASSIGNING <WA>.
I = SY-TABIX MOD 2.
IF I = 0.
<WA>-FLAG = 'X'.
ENDIF.
ENDLOOP.
The above code works faster as compared to
LOOP AT ITAB INTO WA.
I = SY-TABIX MOD 2.
IF I = 0.
WA-FLAG = 'X'.
MODIFY ITAB FROM WA.
ENDIF.
ENDLOOP.
Point # 8
LOOP AT ITAB1 INTO WA1.
READ TABLE ITAB2 INTO WA2 WITH KEY K = WA1-K BINARY SEARCH.
IF SY-SUBRC = 0.
ADD: WA1-VAL1 TO WA2-VAL1,
WA1-VAL2 TO WA2-VAL2.
MODIFY ITAB2 FROM WA2 INDEX SY-TABIX TRANSPORTING VAL1 VAL2.
ELSE.
INSERT WA1 INTO ITAB2 INDEX SY-TABIX.
ENDIF.
ENDLOOP.
The above code uses BINARY SEARCH for collect semantics. READ BINARY runs in O( log2(n) ) time. The above piece of code can be more optimized by
LOOP AT ITAB1 INTO WA.
COLLECT WA INTO ITAB2.
ENDLOOP.
SORT ITAB2 BY K.
COLLECT, however, uses a hash algorithm and is therefore independent
of the number of entries (i.e. O(1)) .
Point # 9
APPEND LINES OF ITAB1 TO ITAB2.
This is more optimized as compared to
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 10
DELETE ADJACENT DUPLICATES FROM ITAB COMPARING K.
This is much more optimized as compared to
READ TABLE ITAB INDEX 1 INTO PREV_LINE.
LOOP AT ITAB FROM 2 INTO WA.
IF WA = PREV_LINE.
DELETE ITAB.
ELSE.
PREV_LINE = WA.
ENDIF.
ENDLOOP.
Point # 11
DELETE ITAB FROM 450 TO 550.
This is much more optimized as compared to
DO 101 TIMES.
DELETE ITAB INDEX 450.
ENDDO.
12. Copying internal tables by using ITAB2[ ] = ITAB1[ ] as compared to LOOP-APPEND-ENDLOOP.
13. Specify the sort key as restrictively as possible to run the program faster.
Point # 12
ITAB2[] = ITAB1[].
This is much more optimized as compared to
REFRESH ITAB2.
LOOP AT ITAB1 INTO WA.
APPEND WA TO ITAB2.
ENDLOOP.
Point # 13
SORT ITAB BY K. makes the program runs faster as compared to SORT ITAB.
Internal Tables contd
Hashed and Sorted tables
1. For single read access hashed tables are more optimized as compared to sorted tables.
2. For partial sequential access sorted tables are more optimized as compared to hashed tables
Hashed And Sorted Tables
Point # 1
Consider the following example where HTAB is a hashed table and STAB is a sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE HTAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
This runs faster for single read access as compared to the following same code for sorted table
DO 250 TIMES.
N = 4 * SY-INDEX.
READ TABLE STAB INTO WA WITH TABLE KEY K = N.
IF SY-SUBRC = 0.
ENDIF.
ENDDO.
Point # 2
Similarly for Partial Sequential access the STAB runs faster as compared to HTAB
LOOP AT STAB INTO WA WHERE K = SUBKEY.
ENDLOOP.
This runs faster as compared to
LOOP AT HTAB INTO WA WHERE K = SUBKEY.
ENDLOOP. -
Back ground job scheduling(urgent)
Hi all,
can anybody will help me ,regarding the step by step procedure to schedule the background job.
i have to do back ground job scheduling for one program so that in that specified time my report will execute?
plz suggest.
ur idea will be highly appreaciated.
Regards
pabitraHI
Please follow the below steps to schedule a background job.
First - create a Report-Variant for your print programm using the SE38.
Then...
1.) Call the transaction SM36
Enter a Job Name / You may set a job class other
than 'C' (See online Help on that field).
2.) Push the STEP Button
3.) Push the ABAP Program button
Enter der programm name an the variant name
save that window
4.) Push "BACK"
5.) Push "Start Condition"
6.) Push Date/Time
Enter Date + Time for the first start
Mark "Periodic Job" !!
7.) Push "Period Values"
Set the period you want the job to be started
Save everything
For more info please refer to this link:
<a href="http://help.sap.com/saphelp_nw2004s/helpdata/en/c4/3a7ed1505211d189550000e829fbbd/content.htm">Background Processing</a>
Kind Regards
Eswar -
Hai All,
Can any one tell me how to catch the erros in BDC session method back ground job.
I need to update Sales orders in BDC session, back ground job.
Finally at the end I need to generate a report which contains all the succesfull updates & errors.
I tried this using call transaction with messtab and is working fine.
Please tell me how to do this in Session method.
Thanks & Regards,
Bhaskar.Hi Bhaskar,
In Session method what you need to do is before processing of hte BDC first you need to check all the data. And if any error found then populate it into the internal table. And that internal table you need to display it on the output......
I think this is the solution but I am not to sure........
&********Reward Point if helpful*******&
Maybe you are looking for
-
Opening a project created in 5.1 in 5.0
is there a work around? I was editing on my macbook, (FCP 5.1.2) which I've left at home, and now I want to make a few tweaks on the G5 here, (FCP 5.0.4) but I get general error (41), and I then discover that one can't open 5.1 projects in previous v
-
hi all We are sending vehicle for road ,RTO test by usnig J1IS trasaction code (excise inovice geenration) with reference to material document .We used 541 movement type & after receiving the material back we used 542 . Now my quarry is how to t
-
How can I eliminate error in printing a cd jewel case cover in latest ITunes version?
How can I eliminate the printing error in Itunes when attempting to print a cd jewel case cover? I'm using the latest iTunes version.
-
Help!! database keeps crashing
I've been working on this problem for 4 months. The database keeps crashing randomly. Sometimes it would not produce any error in the alert log and sometimes it would give me multiple ORA-07445: exception encountered: core dump [ACCESS_VIOLATION] [un
-
IWeb 1.2 or 2.0 -- any news or confirmed rumors?
Hello, I was wondering if anyone has heard anything about the next iWeb release? 1.2 or 2.0. WHEN, what, etc. 1.1 was a really good step in the right direction, but has left me wanting More, More! In particular, some more Templates. Cheers Powerbook