Backgroung job cancelled with the error-Homogenous Lock

Hi All,
We have a custom report ( customer update )which is scheduled to run in the background. In the production system, the job gets cancelled and when we check the log We have the following messages:
20.10.2010 07:14:17 Job started
20.10.2010 07:14:17 Customer 10372118 has been updated                                                               /DS1/A         411          S
20.10.2010 07:14:17 Object requested is currently locked by user XXXX                                                MC           601          E
20.10.2010 07:14:17 Job cancelled after system exception ERROR_MESSAGE
Because of the message"Object requested is currently locked by user xxxx( Homogenous lock ), the job gets cancelled.
Enqeue and deqeue have been taken care correctly.
This problem is reported recently...before that it was working fine.
Have checked SM12, there is no lock. While debugging this error is not reported.
Now please let me know how to know the cause of the error.
Edited by: swarupa.mayflower on Oct 20, 2010 10:45 AM

Hi Immanuel,
I tried opening the customer which I am trying to update in the change mode and then tried debugging the job then it gives me an error message at the bottom of the screen, in this case when I go check there is a lock in SM12.
But my problem is I get this message in the job log and not at the bottom of the screen because of this message(error) the job gets cancelled. Also there is no lock in SM12 in this case and while debugging also I am not getting this message anywhere....
This type of lock is called homogenous lock....but I donno how to trace this error .....

Similar Messages

Job Cancelled with an error "Data does not match the job def: Job terminat"

Dear Friends,
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job   Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?
Edited by: dharmendra gali on Jan 28, 2008 6:06 AM

Dear Friends,
_Urgent : Please work on this ASAP _
The following job is with respect to an inbound interface that transfers data into SAP.
The file mist.txt is picked from the /FI/in directory of the application server and is moved to the /FI/work directory of application server for processing. Once the program ends up without any error, the file is moved to /FI/archive directory.
The below are the steps listed in job log, no spool is generated for this job and it ended up with an error "Data does not match the job definition; job terminated".Please see below for more info.
1.Job Started
2.Step 001 started (program Y_SAP_FI_POST, variant MIST, user ID K364646)
3.File mist.txt copied from /data/sap/ARD/interface/FI/in/ to /data/sap/ARD/interface/FI/work/.
4.File mist.txt deleted from /data/sap/ARD/interface/FI/in/.
5.File mist.txt read from /data/sap/ARD/interface/FI/work/.
6.PD-DKLY-Y_SAP_FI_POST: This job was started periodically or directly from SM36/SM37 (Message Class: BD, Message Number : 076)
7.Job PD-DKLY-Y_SAP_FI_POST: Data does not match the job definition; job terminated (Message Class : BD, Message No. 078)
8.Job cancelled after system exception
ERROR_MESSAGE
Could you please analyse and come up about under what circumstance the above error is reported.
As well I heard that because of the customization issues in T.Code BMV0, the above error has raised.
Also please note that we can define as well schedule jobs from the above transaction and the corresponding data is stored in the table TBICU
My Trials
1. Tested uplaoding an empty file
2. Tested uploading with wrong data
3. Tested uploading with improper data that has false file structue
But failed to simulate the above scenario.
Clarification Required
Assume that I have defined a job using BMV0. Is that mandatory to use the same job in SM37/SM36 for scheduling?
Is the above question valid?

Background Job cancelling with error Data does not match the job definition

Dear Team,
Background Job is getting cancelled when I run a Job on periodically but the same Job is executing perfectly when I run it manually(repeat scheduling) .
Let me describe the problem clearly.
We have a program which picks up files from an FTP server and posts the documents into SAP. We are scheduling this program as a background Job daily. This Job is running perfectly if the files contain no data. But if the file contains data the JOb is getting cancelled with the following messages.
And also the same Job is getting executed perfectly when repeat scheduling is done ( even for files with data).
Time     Message text                                                                       Message class Message no. Message type
03:46:08 Job PREPAID_OCT_APPS2_11: Data does not match the job definition; job terminated        BD           078          E
03:46:08 Job cancelled after system exception ERROR_MESSAGE                                      00           564          A
Please help me in resolving this issue.
Thanks in advance,
Sai.

hi,
If you have any GUI function modules used in the program of job
you cannot run it in background mode.

Partition failed with the error: The target Core Storage volume is locked

partition failed with the error: The target Core Storage volume is locked
Hello everybody!
Please help me.
I'm using MacBook Pro (Retina, 13-inch, Mid 2014), Processer:2.6 GHz Intel Core i5, Memory: 8 GB 1600 MHz DDR3.
my computer i have divided in 3 drives: 1-Machintosh HD (Mac OS) 2-Bootcamp (Window OS) & 3-Data (drive for data storage).
I don't want to use Window OS on my computer anymore so I decided to delete drive Data (the third drive) & Window OS (the second drive).
I want my hard drive become a single drive back but when I was formatting, there were some problem display:
then i clicked ok and it displayed like this:
then i try to format or create new partition, it's nothing happen when press button apply.
my computer has storage space 256GB but now when it is happened like this my storage space is only 127GB only.
so please help me.. what so I do with this problem.
Thank you.!

arajs wrote:
I used Boot Camp Assistant (for instaling Windows XP) and there was Partition error:
+*The disc cannot be partioned because some files cannot be moved.*+
+Back up the disk and use Disk Utility to format it as a single Mac OS Extended (journaled) volume. Restore your information to the disk and try using Boot Camp Assistand again.+
so I tried Yasu, verified permission, verified disk, and everything was ok, but in Disk Utility I was trying to split or change size of my disk but there is one error again:
+*Partition failed.*+
+Partition failed with the error: No space left on device+
but I have 64GB free space!
how must I "+Restore your information to the disk+" or what else can I do?
thanks!
This is a standard error message.
If you would have checked into the bootcamp forum you would have instantly found the solution.
http://discussions.apple.com/forum.jspa?forumID=1244&start=0
All that error message means is that you do not have enough conguous disk space available. No big deal at all for an older system. You have bits of files strewn over the "free space."
The solution as you would find in the bootcamp forum is to clone your HD, using a file-file clone, then test the clone to be sure it is working and then to erase your HD and clone back.
Works every time.
Message was edited by: Theodore

SSMS 2012:XQuery-doing "Retriving Job Candidates with the query Method" in AdventuresWorks 2012. Unclosed quotation mark after string '//*:Name.First?

Hi all,
From Page 354 of the the Book "Pro T-SQL 2008 Programmer's Guide" written by Michael Coles (published by apress), I copied the following code (Listing 12-9 Retrieving Job Candidates with the query Method):
--Coles12_9.sql // saved in C:/Documemnts/SQL Server Management Studio
-- Coles Listing 12-9 Retrieving Job Candidates with the query Method
-- Doing XQuery and the xml Data Type in AdvantureWorks
-- 17 March 2015 1105 AM
USE AdventureWorks;
GO
SELECT Resume.query
N'//*:Name.First,
//*:Name.Middle,
//*:Name.Last,
//*:Edu.Level
FROM HumanResources.JobCandidate;
I executed this set of Listing 12-9 code in my SQL Server 2012 Management Studio and I got the following error messages:
Msg 105, Level 15, State 1, Line 4
Unclosed quotation mark after the character string '//*:Name.First,
//*:Name.Middle,
//*:Name.Last,
//*:Edu.Level
FROM HumanResources.JobCandidate;
Msg 102, Level 15, State 1, Line 4
Incorrect syntax near '//*:Name.First,
//*:Name.Middle,
//*:Name.Last,
//*:Edu.Level
FROM HumanResources.JobCandidate;
I am not able to figure out why I got the error messages. Please kindly help and advise me how to correct this set of sql codes.
Thanks in advance,
Scott Chang

Hi Scott,
I don't have that book at hand, but your problem is the "Unclosed quotationmark after the character string",as the error message shows. You have to enclose the 'XQUERY' string quotation in the
query().
SELECT jobcandidateid, Resume.query
N'//*:resume,
//*:Name.Middle,
//*:Name.Last,
//*:Edu.Level' --enclose the quotation here
FROM HumanResources.JobCandidate;
For XQUERY learning, here is a good
link.
If you have any question, feel free to let me know.
Eric Zhang
TechNet Community Support

Help!! "Volume erase failed with the error"

I have no idea what to do ! My computer was running a bit slow and I wanted to get rid of any unwanted apps and files, so I backed up the files that I did want on an external drive. I then erased everything on my HD. Then I restarted it and attempted to reinstall the old apps from the cd that came with my computer but I couldn't. It takes me to the Utility Dock every time I restart it and when I try to install Lion back on, I can't click on the HD and it says it's 'locked'. When I try to reset it again or do anything at all it gives me a "Volume erase failed with the error" message. I can't do anything! Can anyone help???

Replace the hard drive.
If it can't be erased, that usually means something is seriously wrong with it.

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "

I have just purchased a lightning to 30 pin adaptor to use on an iPad mini and a gen5 iPod touch both devices are running iOS 8.1.3 and come up with The error message "this accessory is not supported by this device "
THis is means they are not charging on a 30 pin cable and the touch won't work in my Apple iPod dock - no audio out or charge. Have re powered both devices to no avail am wondering if the iOS version is the problem
Help!

If it is a lightning to 30 pin adaptor, and you have a 7th Generation Nano it has to fit the Nano.
This is lightning to 30 pin adapter: http://www.bestbuy.com/site/Apple%26%23174%3B---Lightning-to-30-Pin-Adapter/6651 936.p?id=1218803450821&skuId=6651936#tab=overview
Is this what you bought?
You need to contact Sony and see if they model you have is compatible with the docking adapter. It may not be.

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" on my PC and the working PC's. So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
I've heard the advice to recompile the dll with debug turned off but I don't have access to the source code.
Thanks in advance.

u87 wrote:
Thanks for the reply. This at least tells me that going back to LV2010 is not likely to solve the problem. The missing dll's are:
MFC90D.dll
MSVCR90D.dll
IESHMS.dll
WER.dll
And, once again, IESHMS and WER have other dependencies. So perhaps i need to install the Visual C++ development environment.
IESHIMS.dll is an Internet Explorer DLL that gets usually delay loaded by shdocvw.dll. As delay load it can not cause DLL load errors but only runtime errors. Maybe your DLL has it as direct dependency but that is unlikely since it does not have a documented interface.
WER.dll is Windows error reporting for Vista/Win7.
MFC90D.dll is the Microsoft Foundation classes and MSVCR90D.dll is the MS C runtime library, both as debug variant.
So all the DLLs you mention are actually MS DLLs! You haven't identified the DLL that you try to access in LabVIEW that causes these error messages. IESHIMS and WER are usually delay loaded by any component that needs it and should not likely be used by non MS code.
What is the DLL you try to load into LabVIEW and by whom? Get the provider of that DLL to provide you a non Debug build of the DLL. Installing Visual C on all the machines just to make the DLL load is not a solution, besides that it is likely not legal since I doubt you have that many licenses.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

One of my dll's in my vi doesn't run with the error "application configuration is incorrect"

I just installed LV2011 and one dll from my vi won't load with the error "application configuration is incorrect", which is Windows lingo for "missing package dependencies". All the computers at my company with 2010 loaded seem to do OK. When I do a Dependencies Walk I get missing Visual C debug dll's missing plus IEshims and wer which both have a whole tree of dependencies missing on my machine. The Windows install is the same "Windows XP version 2002 Service Pack 3" So I'm thinking I have to uninstall 2011 and go back to 2010. Is this correct? Those VC debug dll's were installed on the machines with 2010 in them but were not installed in mine.
Thanks in advance.

Hm,
it seems that you might have more success in the LabVIEW forum here; this one is for LabWindows/CVI...

DISPLAY/PRINT MY EXPENSE REPORTS UNDER TERA FAILS WITH THE ERROR MESSAGE

Hi Techies,
When i click on "Display/print" button under my expense report ( Employee --> Travel & expenses --> Manage Expenses (TERA) --> My trip reports), it opens up a new window with the error message "SOAP Framework error: SOAP Runtime Exception: CSoapExceptionTransport : HTTP send failed with exception communication_failure(100,101)."
This behaviour is noticed in the new upgraded system NW 701 SP7 (portal) and backend ECC 6.0 EHP4; However it works perfectly fine with our non-upgraded system NW 70 SP10 (portal) and backend ECC 6.0.
When i ran the trace on this functionality, i could notice that in the non-upgraded system, after pulling all the values, it calls the RFC function module "PTRM_WEB_FORM_HTML_GET"; however the upgraded system calls "PTRM_WEB_FORM_PDF_GET".
For the "PTRM_WEB_FORM_PDF_GET", I believe we need to configure the "ADS" rfc pointing to the ADS service on a j2ee server which am not planning for.
MY QUESTION IS:-
IS THERE ANY OPTION TO CHANGE THE FORM BEING CALLED FROM "PTRM_WEB_FORM_PDF_GET" TO "PTRM_WEB_FORM_HTML_GET" WHICH I BELIEVE WILL RESOLVE THE PROBLEM AM FACING?
Kindly assist with your thoughts!1
-GK

Read the steps on note 1032311 on how to achieve it,
In Web Dynpro, the Parameter for Formula is Defaulted to PDF file. If
you don't want to use the ADOBE Form in ESS, you have to follow 2 steps:
Solution
    o Check the Homepage framework configuration.
In IMG (transaction SIMGH) go in Travel Management->Employee Self
Service->Homepages Framework->Ressources
Delete the URL parameter "sap.xss.tra.UsePdf=true" of the ressource
"EMPLOYEE_TRAVEL_TRIPFORM_SRV05".
Check that the field URL for PCD file is filled with
ROLES://portal_content/com.sap.pct/every_user/com.sap.pct.erp.ess.bp_fol
der/com.sap.pct.erp.ess.roles/com.sap.pct.erp.ess.employee_self_service/
com.sap.pct.erp.ess.employee_self_service/com.sap.pct.erp.ess.area_trave
l_expenses/com.sap.pct.erp.ess.tripform
Normally if it is not filled in your client, the system should use the
one from client 000, that is the SAP delivered customizing.
    o Check the Portal PCD configuration
Logon on to your SAP portal as Administrator.
In the Content Administration - Portal content, select Content
provided by SAP->end User Content->Employee Self Service->iViews->Travel
and Expenses->Display Trip Form
Right Click on Display Trip Form and Select Object->Open
In the field Application Parameters, you will find a parameter
                                                                 Page 2
sap.xss.tra.UsePdf=true . Delete this line completely.
When this configuration is done, the PDF form is desactivated and the
HTML form is used.
This is the issue with ADOBE set up
Firstly, I would ask you to check the customizing steps from 944221
to ensure no issue with the ADS configuration for the pdf form.
to review OSS note 925741 as there can be a issue with the
platform validity and version.

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

My ipod 60gb classic is showing as fully charged until I connect it to my pc when it comes up with the error message, 'please wait very low battery' and the little wheel goes round and nothing happens, can anyone explain why this is and what i can do?

I have worked my way through the assistant and nothing works. I have tried connecting in disc mode but although the screen on the ipod is showing that the device is charged and that it is in disc mode as soon as I connect it to the computer it comes up with the error message 'please wait very low battery' and stays like that until I disconnect when it appears to be OK again. I have tried on both pc and mac.
BTW the ipod is an ipod video not classic if that makes any difference.
Thanks

Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks

Lightroom crashes at start up with the error message "Lightroom encountered an error when reading from its preview cache and needs to quit". Please advise on how to fix this error. Thanks

You probably need to delete your preview cache. See here
Why And How To Clear Your Lightroom Cache - Lightroom Fanatic
Preference and other file locations in Lightroom 5

TS3899 Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect

Having trouble accessing my email account thru the mail app, after entering the account information in the settings page, hotmail returns with the error message " The user name or password for Hotmail is incorrect". Help

Hotmail is having problems:
http://bostinno.streetwise.co/2013/08/15/hotmail-outage-hotmail-is-down-for-user s-still-photos/
http://www.engadget.com/2013/08/14/outlook-outage/
http://www.infoworld.com/d/applications/microsofts-skydrive-outlookcom-are-down- some-users-224940
http://mashable.com/2013/08/14/outlook-down/
http://techcrunch.com/2013/08/14/microsoft-acknowledges-outlook-com-messenger-sk ydrive-outages/

HT201210 Itunes will no longer open with the error message MSVCR80.dII is missing from the computer, and I'm advised to reinstall itunes but that hasn't worked. What else can I try?

Itunes will no longer open with the error message MSVCR80.dII is missing from the computer, and I'm advised to reinstall itunes but that hasn't worked. What else can I try?
Thanks for your help
Pippa

Click here and follow the instructions.
(98708)

TS5376 I have a laptop that i am running with Windows Vista. A while ago, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.

I have an iMac as my home computer, upgraded to this about a year ago from a windows pc and love it.
However...
I have a HP Compaq laptop that i am running with Windows Vista, which I use when travelling. A while ago, I believe on an update, to either windows or itunes, it stopped running iTunes and comes up with the error : Runtime Error: R6034 - An application has made an attempt to load the C runtime library incorrectly.
I have a reasonable amount of tunes stored on my laptop, and am unable to ascertain as to whether this fix for allowing itunes to work again will delete my music folder and lose all the tunes i have on my laptop already?
The contents of my music folders on my laptop and iMac are not the same, as they are not synced!
Any help please on this would be appreciated!
Pete

See Troubleshooting issues with iTunes for Windows updates. The second box covers the basic removal and repair steps. The rest is links to other useful resouces.
tt2

Backgroung job cancelled with the error-Homogenous Lock

Similar Messages

Maybe you are looking for