Backup drive no longer working after Lion upgrade

After upgrading to OS Lion, WD network hard drive is no longer supported by Time Machine.  It was working fine on Snow Leopard. Is there a setting that will allow me to get my data back?

Please follow these instructions:
Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
https://discussions.apple.com/thread/3258472

Similar Messages

  • Scan via Preview no longer working after Lion Upgrade

    After upgrading to Lion, I can no longer use Preview to scan a document from my Kodak ESP9.  I have a range of issues, but the most common is that after telling preview to look for networked scanners, and then selecting the Kodak, it open a box that should automatically start a preview scan.  Instead, the box shows the SCAN and OVERVIEW button but nothing else, the screen is jsut blank.
    I have updated Kodak's sofware and firmware to Lion versions.
    Anyone have an idea how to get this working again?  It was flawless before the Lion upgrade.
    Thanks.

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • Screen saver no longer working after Lion upgrade.

    Hi,
    After standard upgrade about 2 weeks ago (mid July 2012) the screen saver no longer works. I mean I can certainly access the application and the desktop can be made to cycle through different photos etc. But when I configure the screen saver it just refuses to go into screen saver mode at all.
    I'm not seeing too much occurance of this through the postings which is a bit worrisome as I'd thought this would be a much wider issue.
    Cheers,
    Herbie

    Please follow these instructions:
    Lion: Connecting to legacy (pre-Lion) AFP services - and Mac OS X (server):
    https://discussions.apple.com/thread/3258472

  • Magic mouse no longer works after Lion upgrade

    After upgrading to Lion my magic mouse failed to work. I plugged in an older USB mouse and thankfully it does work. It appears the System Preference for Blue Tooth no longer has my machine name in it, instead it has "Name not available" and the "On" check box will not stay checked when I reopen the preference. The syncing process "Set Up New Device..." doesn't seem to work either, it searches but doesn't find eventually the flashing LED on the mouse goes out.
    I've tried to solve this but failed. I believe its something wrong with the installation of Lion on my iMac because I installed Lion on my lap top and the magic mouse WILL sync with it.
    What do you suggest I do to remedy this situation?

    Solved it myself. Re installed Lion.
    Thanks Radio for your help

  • Internet sharing no longer works after Lion 10.7.4 update

    Internet sharing no longer works after Lion 10.7.4 update. Hopefully Apple will fix this shortly. Little excuse for this kind of screw-up.

    so here is da answer
    1. go to finder>(computer name)>macintosh HD>library>preferences
    2. copy the entire systemconfiguration folder and systemconfiguration.old folder to your desktop
    3. restart mac and device which you share intenet to
    then you have internet that is about 3x slower than the da 10.7.3 intenet sharing, but works
    then, just wait for apple to release da 10.7.4 fixed
    please use da steps!

  • My ImageClass MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. How can I resolve this?

    My Image Class MF4380dn Cannon Multifunction Copier driver no longer works after installing Mavericks. I have checked with Cannon and they do not list my partricular machine among their driver updates. Is there another place to download a driver suitable for Mavericks?

    Your MF4380dn is supported by the latest UFR2 v10.4.0 driver that supports 10.9. Here is a link from the Canon Australia web site,
    http://support-au.canon.com.au/contents/AU/EN/0100491502.html
    Before installing this driver, please remove the MF4380 from Printers & Scanners (unless you have already performed the reset that Carolyn mentions which will remove it for you). Then run the v10.4.0 installer and when it has completed, open Printers & Scanners and add the MF4380.

  • Epson printer driver no longer working after 10.4.11 update

    It seems that my original Epson driver for my Stylus Photo 750 is no longer working after my latest Tiger update. The system does recognise it but shows an exclamation mark behind it and refuses to print with it (the document stays in the waiting line forever). Reinstalling as well as repairing permissions didn´t help. Fortunately the Gimp Epson driver is still working but I have no access to my coloursync profiles with this driver.
    I know that many printer drivers need to be rewritten for Leopard (one of the reasons I didn´t update yet) but it is not understandable why problems happen with a Tiger update.
    Does anyone know a workaround?
    Thanks very much
    Wolfgang

    I just discovered a similar problem. I have an old Epson SC3000 and under 10.4.11 my computer doesn't communicate with the printer. It's an AppleTalk printer, connected via Ethernet. I tried bypassing my network switch and connected it directly to the Mac-- no go. I then rebooted into 10.3.9 and printing works fine.
    I downloaded the driver from Epson and installed it in 10.4.11. When I try to add the printer in the Printer Setup Utility, the machine just hangs-- can't force quit the utility and eventually the Finder even stops responding. It takes a hard reboot to clear up.
    I can't say whether or not printing worked in earlier versions of 10.4. I haven't been using 10.4 for very long, and I rarely use the SC3000.

  • Time Machine backup to my NAS drive (MyBookLive from WD) stopped working after Lion Upgrade

    After my upgrade to Lion OS, I noticed that Time Machine backup failed to connect to my MyBookLive WD NAS drive. It was perfectly working while the machine was still on Snow Leopard. This is the error I am getting.
    "The network backup disk does not support the required AFP features.
    Open Time Machine preferences to select a different backup disk."
    Any help with workaround would be greatly aprreciated. Thx for your help and support.

    OK I ran into issues.  I'm doing the play by play on Q18 for copying a locally connected backup to a network connected backup - so I start the backup with the backup disk connected to the TC and then stop it when the XXX of YYY copied shows up.  I disconnect and connect the disk directly.  The problem is I don't seem to have permission to mount the sparsebundle:
    So I get info and click the lock and enter my admin password and change the everyone from no access to read and write.  Then I try to open the sparsebundle and I get:
    So I did that twice with the same effect.  Then I noticed I can mount the sparsebundle if I leave it connected to the time capsule.  So its mounted - good.  Then I go into disk utility and try to erase the mounted "time machine backups" drive and it didn't like that much - I wish I took a screenshot but I didn't.  It basically said I can't do that.
    So now I don't know what to do.  I'm currently starting a backup set fresh and this time letting it run to completion however I excluded my entire user account so the backup size is only 25 GB.  When it finishes then maybe I can move the disk local and go in and see if I can mount the partition and erase the contents and copy over my backup file into the sparsebundle.
    So does anyone know why I can't access that sparsebundle the way Pondini says I should be able to?  Any suggestions?  If my latest attempt doesn't work then I'll just do a full backup and say to heck with my history although that would be unfortunate.

  • Time Machine backup on external drive no longer working after upgrade to Yosemite

    Can anyone explain why, after upgrade to Yosemite, Time Machine is no loger working? Backup on external drive stops few seconds after it has started. What can I do?

    Welcome to Apple Support Communities
    Try running a DVD Lens Cleaner disc through it, a little bit of dust or dirt is all it takes to throw them out and it might just be co-incidental with the upgrade.

  • DVD drive won't work after Mavericks upgrade

    I upgraded to Mavericks from Snow Leopard, and ever since, my CD/DVD drive will not work.  Discs spin, but then they are ejected.  Doesn't matter what type of disc I put in.
    The drive was working fine before I upgraded.  I have reset the SMC and the NVRAM/PRAM, but the drive still isn't working.
    Any suggestions for what else I can try?

    Others here wouldnt recommend it, but on a new OS install, since I have a giant pile of HD, ...i just grab another HD and create a new fresh Time Machine backup
    after its complete, I take the original HD with the OLD backup and format/erase it.
    Im a tad too lazy to wait, as you yourself mentioned,  1 hour for TM just to PREPARE to backup. Nope, no,...not gonna do it.
    I updated 4 Macs to Mavericks and id rather make a wholly NEW Time Machine backup on another HD and erase the original.
    Since I keep about 12+ redundant archives of my important data, I have no worry on earth of ever losing data.
    Time machine is a backup, NOT an archive for vital data.
    Methodology to protect your data. Backups vs. Archives. Long-term data protection

  • Express Card on MBP Not working after Lion Upgrade

    Since upgrading to Lion, the Express Card on my MBP (2009 model) is no longer working.  Any card inserted does not show up on the finder.  The Express card icon does show up on the menu bar and gives me the option to power off the card, but there's no way I founf to read the card anymore.
    Disk Utility also does not see the card.
    Any help available would be very appreciated.

    heeynorton wrote:
    @EZ Jim. Unfortunatley that did not help.  I was very excited to try it as nothing else has worked, but to no prevail.  I suppose I'll have to take it into the Apple Store.
    The Apple Service Techs will surely be able to get it working for you.  Regardless of how you proceed from here, be sure to make a current backup of all your important files first unless you already have done so.
    If you have the time, and if you want to try one more thing before taking your Mac in for service,  a complete Lion reinstall may fix your problem.  If you did not do so before your initial Lion install, it may help to uninstall any PPC or Classic Apps.  These kinds of apps cannot run in Lion, and could be a source of software conflicts.  The easiest way I know to find PPC and Classic apps is to sort (by "kind") the list of Software > Applications listed in your Mac's System Information Utility.
    Once you have uninstalled all PPC  and Classic apps, reinstall Lion.  If you need help, the instructions here explain how to reinstall Mac OS X while keeping your files and user settings intact: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1599.html 
    If the problem persists even after this reinstall, (unless you have a hardware problem,) a complete erase and reinstall of OS X should get your system working.  The help article for this process is here: http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1599.html  Erase and reinstall will take much more time, largely because you will need to reinstall all apps and then reload your data files from your backups.  To avoid the possibility or also restoring possible conflicts or problems, do NOT use migration assistant after erase and reinstall.  Rather, reinstall each app from its own installer and manually copy data you need.

  • Forms HOST command no longer works after database upgrade from 10g to 11g

    Hi,
    After upgrading the database 10g to 11g the forms HOST command no longer works on Unix server. The form used to work fine prior the upgrade. I read all the threads I could find and did not see any solutions. Adding PATH and LD_LIBRARY_PATH does not work because it does not even run a basic shell script. (I saw this solution, adding PATH and LD_LIBRARY_PATH, in many questions / threads).
    1. I wouldn't expect the database upgrade to be an issue, but it is the only change we had.
    2. Note, 11g is Oracle Fusion Middleware which is quite a bit different than 10g.
    I even tried the most basic commands like "echo" which is a build-in Unix command and there is no directory for it (ie. no /usr/bin - so variable PATH is irrelvent). i.e HOST('echo hi'); and HOST('echo "hi" '); and even HOST ('echo hi > /my_file.txt'); all returns FORMS_FAILURE (actually the if is IF FORM_SUCCESS THEN ... else ... and the else part always runs now - whereas it didn't before.).
    Or basic commands like /usr/bin/ls as in HOST(/usr/bin/ls). At that point I was just testing the Unix command would return FORM_SUCCESS even though I could not see the results (because they weren't writing to a log file). Notice that I'm using the direct path /usr/bin so no Unix environment variables were needed.
    The form does use webutil but that part works. For example, we have webutil_file_transfer( ....) The file shows up on the application server and in the expected directory.
    Here's the main goal. Upload a file from clients local PC to the datebase server. The form uploads the file to the Application server, then we have a Unix script to scp (secure copy) the file from the application server to the database server. IF webutil, or any other Oracle functions could put the file on the database server that would be better. But, I don't know of any procedures that do that - or would have done it cleanly (i.e. storing to database and write back to server and then using a blob etc. )
    Anyway, I was hoping someone would help with either of these.
    1) Get the HOST command to work. - If we can get that to work then I wouldn't need any more help. We can just call the already existing Unix script to copy the file from the application server to the database.
    2) OR be able to upload directly to the database server - wanted to do that originally
    Any help would be appreciated

    Solution for those interested and for anyone else searching this forum for a solution
    I found this on My Oracle Support:
    <h3>Host Command from Forms Not Working in 11g in Sun Solaris Sparc OS [ID 1157346.1]</h3>
    Applies To: Oracle Forms - Version 11.1.1.1.0 and later
    Sun SPARC Sun OS
    Symptoms:
    When trying to execute a Shell script or any OS command using the host() Built-in from Forms 11g, the host()command is not getting executed. The same functionality works on other operating systems and in previous versions like 10gR2.
    Steps to be followed:
    1) Take a backup and edit the $DOMAIN_HOME/config/fmwconfig/servers/WLS_FORMS/applications/formsapp_11.1.1/config/default.env or any custom environment file.
    2) Locate the following environment variable:
    LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    3) Comment out this variable. After the changes, it will look like the following:
    #LD_PRELOAD=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    3) a) Instead of LD_PRELOAD, kindly use LD_PRELOAD_64 as given below :
    LD_PRELOAD_64=/ora10gas/app/11.1.0/Middleware/as_1/jdk/jre/lib/sparcv9/libjsig.so
    (This makes HOST AND RUN_REPORT_OBJECT work fine).
    4) Save the file and execute your forms. The Host() built-in will work as expected
    The LD_PRELOAD setting in default.env is only required for the working of signal chaining facility in JVM version 1.5 and later. If you are not using theSignal chaining facility, this variable is not required. For more information, refer to the following documentation
    http://download.oracle.com/docs/cd/E14571_01/doc.1111/e14772/forms.htm#CJAJGAFF

  • Printing No Longer Working After Recent Upgrade

    My printing suddenly stopped working after the latest upgrade (which upgraded the kernel from 2.6.15.2 to 2.6.15.4). 
    I discovered that arch is no longer auto-loading the parport_pc module.  This is strange.  If I run "hwdetect --show-modules", parport_pc is shown. 
    I do have MOD_AUTOLOAD="yes" in my rc.conf file.
    The quick fix is to add "parport_pc" to the list of MODULES in rc.conf.
    Are others having this problem?
    Rob

    I just read your post.  I am sorry I could not join irc.  I was actually at work.  It is very hard for me to use irc at work.  Firewalls make life difficult!
    In any event, I think I solved the problem. 
    Please see http://bbs.archlinux.org/viewtopic.php?t=18747
    Here is the complete post:
    In my /etc/modprobe.conf file, there was the folloiwng line:
    # Load lp support with parport_pc
    install parport_pc modprobe -i parport_pc ; modprobe lp ; true
    I believe that this line was in the original /etc/modprobe.conf file that came with arch 0.7. I don't remember ever adding it.
    I commented out this line and I removed "parport_pc" from the list of MODULES to be loaded in /etc/rc.conf.
    I rebooted and it worked. The modules lp, parport and parport_pc were all autoloaded at boot-up.
    I should also note that right after the arch upgrade, I was experiencing CUPS daemon failure once and awhile at boot up. Somtimes cupsd loaded and sometimes it failed at boot up. Now it seems that cupsd loads reliably at every bootup. Problem solved!
    The following are the remaining lines in my /etc/modprobe.conf:
    # Load ppp-generic with modem drivers
    install Intel536 modprobe -i Intel536 ; modprobe ppp-generic ; true
    install Intel537 modprobe -i Intel537 ; modprobe ppp-generic ; true
    install ltmodem modprobe -i ltmodem ; modprobe ppp-generic ; true
    install ltserial modprobe -i ltserial ; modprobe ppp-generic ; true
    install slamr modprobe -i slamr ; modprobe ppp-generic ; true
    install slusb modprobe -i slusb ; modprobe ppp-generic ; true
    # OSS Compatibility
    #install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
    #install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
    # --- BEGIN: Generated by ALSACONF, do not edit. ---
    # --- ALSACONF version 1.0.10 ---
    alias snd-card-0 snd-opl3sa2
    alias sound-slot-0 snd-opl3sa2
    options snd-opl3sa2 fm_port=-1 midi_port=-1 port=0x538 wss_port=0x530
    options isapnp=0 dma1=1 dma2=0 irq=5
    # --- END: Generated by ALSACONF, do not edit. ---
    The modem driver lines came with the original /etc/modprobe.conf file in arch 0.7.
    Should I also comment them all out?
    Perhaps I should only have the lines for my old ISA sound card in the /etc/modprobe.conf file. Please let me know.
    Has there been a change in the kernel or udev which makes it neccesary to make all these changes in the /etc/modprobe.conf file?
    Rob

  • Flashcards for screen brightness no longer work after BIOS upgrade

    I have a Toshiba Satellite T135D/1320S laptop, and last night I upgraded the BIOS to v1.90 under the recently released recall notice.  AFter installing the BIOS, however, the Flashcard brightness controls no longer work. Whenever I press FN-6 or FN-7, the screen brightness Flashcard pops up and the toggle on the slider bar moves back and forth, but the brightness of the screen does not change.
    I have disabled and re-enabled the Flashcards as suggested in a separate forum, and I've also downloaded the most recent display driver (AMD display driver v8.615).  Neither effort corrected the problem.
    Anyone have any other suggestions?

    Satellite T135D-S1320
    Sometimes it helps to reset the machine. With the battery and AC adapter removed, close the Power switch for half-a-minute. Re-attach those, press the Power button to turn the computer on, and then immediately press the F2 key while the Toshiba logo is displayed. Press F9 to restore the BIOS default settings, press F10, and then select Yes (Exit Saving Changes). The computer will restart.
    Another things to try is reinstalling the TVAP.
       Toshiba Value Added Package for Windows 7 (64)
    -Jerry

  • How do I fix aLaCie Backup Drive that runs constantly after Maverick upgrade

    LaCie backup drive for time machine runs constaantly after Maverick upgrade.  This is using resources and slows the processor

    After installing Mavericks on my one year old iMac (loaded) Time Machine failed (Pegasus Promise Thunderbolt 3TB).  I tried unmounting it, didn't work.  Rebooted: Time Machine failed again [Time Machine couldn’t complete the backup to “Time Machine”. Unable to complete backup. An error occurred while creating the backup folder.] was the only message. Had to reboot to get Pegusus accessible again.  Tried re-intalling Maverick (old Microsoft thing... reintall the OS).  Didin't do anything for Time Machine, same failure.  Booted into safe mode: nothing, same probelm.  Repaired permissions: no joy there either.  So, now have no Time Machine backups at all. And Time Machine won't work with the Pegasus. [same error message after 30 min or so every time].  ordinary file saves work fine though.
    Ideas please?

Maybe you are looking for