Backup failed - "Please check system settings"

I am trying to copying my existing data to the device. The existing data is on an external drive and I have it plugged into one of the USB ports on the back. I created a USB Backup job, but it failed. What is a little strange is it has reproduced a portion of the original source path inside the destination folder. The destination path is supposed to be.. 'VZ-Cloud/Work/Allegorthmic' it has added on an additional 'Expansion_Desk-1\VZ-Cloud' from the source path. Can anyone help me with this? Now I cannot access the EX4 and of coarse the drive lights are flashing.

There is a fault in the device firmware which, according to my investigation, is due to the use ot the "timeout" parameter in the rsync command. This timeout value is sepcified as 30 seconds which is not sufficient for large or complex backups. I have logged this fault with WD but have not had any followup from them. In my case I have proved that the same rsync command with a larger timeout value works. Below is my SSH script to further illustrate the fault. # rsync --timeout=30 --job-name=FooBar --delete /mnt/HD/HD_FooBar/ /mnt/USB/USB1_FooBardu: write errordry_total_size:2rsync: writefd_unbuffered failed to write 788 bytes to socket [sender]: Broken pipe (32)rsync error: timeout in data send/receive (code 30) at io.c(1530) [sender=3.0.7] # rsync --timeout=60 --job-name=FooBar --delete /mnt/HD/HD_FooBar/ /mnt/USB/USB1_FooBardry_total_size:149118752085#

Similar Messages

Unable to reach Adobe servers, Please check firewall settings and try again

I have been a creative cloud customer since it started and I've never experienced such buggy software as the app manager. The customer experience is just shocking and I wish Adobe would just offer direct downloads for the software we need rather than use the app manager.
I'm currently trying to install the latest versions of the programs but the app manager keeps showing "Unable to reach Adobe servers, Please check firewall settings and try again in a few minutes".
I do not have any firewalls on my network.
I've uninstalled all previous versions of the applications.
The app manager will download a few % and then the message appears again. I click retry and it downloads another few % before showing the message again. I keep doing this until the program is fully downloaded and installed which take hours. Because I am able to eventually download the app, the error should be anything to do with my setup or internet connection as I've never had this issue before when installing adobe products.
Is there a way we can bypass the app manager and install the programs directly? This is getting very annoying and I just need my apps to install without wasting days clicking the retry button.

I'm having the exact same problem. Photoshop is stuck at 0%.
Have the links for direct download changed? When I went to http://prodesigntools.com/adobe-cc-direct-download-links.htmland then scrolled down the page to:
Photoshop CC 2014 (64-bit)
740 MB
File 2
801 MB
File 1
and then clicked on File 1 and File 2, I reached a page that says "You don't have permission to access "http://trials3.adobe.com/AdobeProducts/PHSP/15/win64/Photoshop_15_LS20_win64.7z?" on this server."

My adobe cloud desktop app seems to have stopped working. I keep getting a error message saying Unable to reach adobe servers, please check firewall settings.

My adobe cloud desktop app seems to have stopped working. I keep getting a error message saying Unable to reach adobe servers, please check firewall settings.
The creative cloud icon on the top menu bar is greyed out, and not updates show.
I have spoke to our internal IT and my settings are the same as my colleagues who's is working fine, can anybody help with this ongoing problem?

Grafix121 please ask your I.T. department to review the Adobe Creative Cloud Security FAQ for IT section of Creative Suite Enterprise Deployment | Adobe Developer Connection for information on how to configure your network to allow connections to the Adobe servers.

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later.

Trouble updating to iOS 5 on my wife's iPhone 4 connected to our iM, right before download finishes downloading iTunes comes back with the error message Software corrupted during download. Please check network settings and try again later, however there was no problem updating my iPhone to iOS 5 through iTunes connceted to my dell laptop on the same wireless network. What gives?

Try disabling your firewall; both on your PC and the external Firewall/Router.

" loading failed please check your page for java script errors" please Help

recently my project starts crashing.... when it loads it gives a java scrip error .. saying " loading failed please check your page for java script errors"

Hey, If you have an error, you should see the error in Edge and you can correct it. In the window/code there will be a red dot too.

When I try to FaceTime on my ipad it says face time failed please check the number but it says this on every number

When I try to FaceTime on my ipad it says face time failed please check the number but it says this on every number and I know thier correct

Read this
http://support.apple.com/kb/TS5419
As of april 16 every device that uses facetime must be updated to acertain level or it won't work. And the 'catch' is that it applies to your device and the person you're calling.

Trying to update my Iphone 4 on Itunes on Windows XP but a message appears that says "unable to update IPhone. Please check network settings/config., etc...or try again later". Please help

Need to update my IPhone 4 and connected to the itunes on windows XP. I clicked on update and waited. A message appears that says," Cannot update etc. Please check your network settings/config., etc... or try again later" and it's been happening for a while. Please help.

Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US

RMAN backup Scripts: Please Check and Advice

Dear All
We are now upgrading our database from 9iR2 to 10gR2.
Before this process we want a full database backup with RMAN with the following scrips. I also included our current database configuration.
So, dear all gurus please check this process if any thing goes wrong and give some valuable advice for better performance and other issue.
===========================================================
/data01          400GB
/data02      400GB
/data03          400GB
/idx04          400GB
Current Tablespace Used Size= 1700GB
Total Tablespace=31
Total File=295
Max File Size= 15GB
Avg File Size= 9GB
CPU_COUNT=4
Memory=32GB
sqlplus /nolog
conn /as sysdba
--configured database in archivelog mode. Then
create user rman identified by pass default tablespace INDX tempprary tablespace temp;grant connect,resource,RECOVERY_CATALOG_OWNER to RMAN;
RMAN target rman/rman@dwh nocatalog
RMAN>configure channel device type disk maxpiecesize=64GB;
RMAN>configure channel device type disk maxsetsize=195GB;
RMAN>configure channel device type disk parallelism=4;
RMAN>run {
allocate channel Channel1 type disk format '/data01/oracle/rman_backup/DWH_df_%s_%p_%c';
allocate channel Channel2 type disk format '/data02/oracle/rman_backup/DWH_df_%s_%p_%c';
allocate channel Channel3 type disk format '/data03/oracle/rman_backup/DWH_df_%s_%p_%c';
allocate channel Channel4 type disk format '/idx01/oracle/rman_backup/DWH_df_%s_%p_%c' ;
backup as compressed backupset database plus archivelog;
backup current controlfile format '/idx01/oracle/rman_backup/DWH_cf_%U.f';
backup spfiel format '/idx01/oracle/rman_backup/DWH_spf_%U.f';
release channel Channel1;
release channel Channel2;
release channel Channel3;
release channel Channel4;
===========================================================
Thanks & Regards
Quazi Abdur Rab

Try this ...
RUN {
RECOVER COPY OF DATABASE WITH TAG 'incr_backup' UNTIL TIME 'SYSDATE - 7';
BACKUP INCREMENTAL LEVEL 1 FOR RECOVER OF COPY WITH TAG 'incr_backup' DATABASE;
The RECOVER COPY... line will not do anything until the script has been running for more than 7 days. The BACKUP INCREMENTAL line will perform a complete backup (level 0) the first day it is run, with all subsequent backups being level 1 incremental backups. After 7 days, the RECOVER COPY... line will start to take effect, merging all incremental backups older than 7 days into the level 0 backup, effectively moving the level 0 backup forward. The effect of this is that you will permanently have a 7 day recovery window with a 7 day old level 0 backup and 6 level 1 incremental backups. Notice that the tag must be used to identify which incremental backups apply to which image copies

CLUVFY fails to check system requirements

clusterware 10.2 installation manual advises to check the system requirements by running cluvfy
http://download.oracle.com/docs/cd/B19306_01/install.102/b14203/prelinux.htm#sthref133
but when I run it with the parameters like in the manual, I get this error:
[oracle@zeeta bin]$ ./cluvfy comp sys -n zeeta -p crs -osdba dba -orainv dba
Verifying system requirement
Checking system requirements for 'crs'...
No checks registered for this product.
Verification of system requirement was unsuccessful on all the nodes.
does anyone know what's wrong with it?
I'm running RHEL4 Update 6

on Node 1:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
10.1.1.49 prodora1.ybp.com prodora1
######### Public Host IPs - Physical (eth2)#####
#10.1.1.49     prodora1.ybp.com     prodora1
#10.1.1.50     prodora2.ybp.com     prodora2
#10.1.1.51     prodora3.ybp.com     prodora3
#10.1.1.52     prodora4.ybp.com     prodora4
######## Interconnect Host IPs (Heartbeat) #####
### Network 192.168.1/24 Enet eth0 (all hosts) ####
#192.168.1.11     prodora1-priv.ybp.com     prodora1-priv
#192.168.1.12     prodora2-priv.ybp.com     prodora2-priv
#192.168.1.13     prodora3-priv.ybp.com      prodora3-priv
#192.168.1.14     prodora4-priv.ybp.com      prodora4-priv
######## Interconnect Host IPs (Heartbeat) #####
### Network 192.168.2/24 Enet eth1 (all hosts) ####
#192.168.2.11 prodora1-priv-b.ybp.com     prodora1-priv-b
#192.168.2.12 prodora2-priv-b.ybp.com     prodora2-priv-b
#192.168.2.13 prodora3-priv-b.ybp.com     prodora3-priv-b
#192.168.2.14 prodora4-priv-b.ybp.com     prodora4-priv-b
######## VIPs for Oracle DB/RAC ####################
10.1.1.59     prodora1-vip.ybp.com     prodora1-vip
10.1.1.60     prodora2-vip.ybp.com     prodora2-vip
#10.1.1.61     prodora3-vip.ybp.com     prodora3-vip
#10.1.1.62     prodora4-vip.ybp.com     prodora4-vip
On Node 2:
# Copyright (c) 1993-1999 Microsoft Corp.
# This is a sample HOSTS file used by Microsoft TCP/IP for Windows.
# This file contains the mappings of IP addresses to host names. Each
# entry should be kept on an individual line. The IP address should
# be placed in the first column followed by the corresponding host name.
# The IP address and the host name should be separated by at least one
# space.
# Additionally, comments (such as these) may be inserted on individual
# lines or following the machine name denoted by a '#' symbol.
# For example:
# 102.54.94.97 rhino.acme.com # source server
# 38.25.63.10 x.acme.com # x client host
127.0.0.1 localhost
######### Public Host IPs - Physical (eth2)#####
#10.1.1.49     prodora1.ybp.com     prodora1
#10.1.1.50     prodora2.ybp.com     prodora2
#10.1.1.51     prodora3.ybp.com     prodora3
#10.1.1.52     prodora4.ybp.com     prodora4
######## Interconnect Host IPs (Heartbeat) #####
### Network 192.168.1/24 Enet eth0 (all hosts) ####
#192.168.1.11     prodora1-priv.ybp.com     prodora1-priv
#192.168.1.12     prodora2-priv.ybp.com     prodora2-priv
#192.168.1.13     prodora3-priv.ybp.com      prodora3-priv
#192.168.1.14     prodora4-priv.ybp.com      prodora4-priv
######## Interconnect Host IPs (Heartbeat) #####
### Network 192.168.2/24 Enet eth1 (all hosts) ####
#192.168.2.11 prodora1-priv-b.ybp.com     prodora1-priv-b
#192.168.2.12 prodora2-priv-b.ybp.com     prodora2-priv-b
#192.168.2.13 prodora3-priv-b.ybp.com     prodora3-priv-b
#192.168.2.14 prodora4-priv-b.ybp.com     prodora4-priv-b
######## VIPs for Oracle DB/RAC ####################
10.1.1.59     prodora1-vip.ybp.com     prodora1-vip
10.1.1.60     prodora2-vip.ybp.com     prodora2-vip
10.1.1.61     prodora3-vip.ybp.com     prodora3-vip
10.1.1.62     prodora4-vip.ybp.com     prodora4-vip
Thanks

IMessage on ML - "Could not sign into iMessage. Please check network settings and try again"

i came across an issue when signing into iMessage with an Apple ID on Mac.
i had been experiencing the "Could not sign into iMessage. Please check network setting and try again" error for iMessage issue since installing Mountain Lion. i finally solved my problem after talking to the Apple Tech Support team.
Here's the steps:
1. Shut down laptop.
2. Switch on laptop again. immediately hold down the left "SHIFT" key until u get into the log in screen. By doing this, ur laptop will be in "Safe Boot" mode.
3. Sign into iMessage using Apple ID. (i was able to sign into iMessage for the first time on my Mac since getting ML)
4. Shut down laptop again.
5. This time switch laptop on normally.
6. You should be able to use iMessage normally.
in addition, make sure the boxes for date & time and timezone are ticked to be set automatically.
Hope this is helpful for users experiencing the same issue i had. it did for me!
Cheers

Okay,
let me add my story to this thread.
Brand spanking MBA, Mountain Lion.......logged into Imessage 1st thing, no prob.
Then, after a few weeks; in the middle of a chat....the name of the other person turned red and my sent messages received a red dot as they were not sent. I checked with the other person.
I couldn`t recieive any messages either, not from any contact.
I logged out, and I couldn`t log in anymore.
I get a yellow triangle saying something like "error while logging in, try again later".
I tried again and again later........
I seeked help on this forum and a user helped me initially.
I re-installed the whole Mountain Lion, a process that I don`t care to repeat too often.
That fixed it for a while, but yesterday the same thing happened.
In the middle of a chat....the red name, the red dots......well, you get the picture.
I tried, to no avail:
# to log in after reseting the PRAM
# boot up and log in whilst in SAVE mode. It will NOT log in, same problem
# to log in after deleting all Imessages and Facetime files in Library/Preferences
# to log in with my wife`s Apple ID, or any ID really.
What did work was logging in with my ID on my wife`s Ipad, no worries.
My account is Yahoo, and don`t seem to be the problem.
Please, any suggestions welcome.
I have urged Apple politley to give us a fix at:
http://www.apple.com/feedback/
Thanks,
MXP 150 Patriot

Recovering Mac HD via Time Machine Backup fails because "Restore system from backup" doesn't show in Utilities Menu of original install. DVD

Hi, after serious problems (troubleshooting didn't help) with my iMac G5 (PPC) running Mac OS X Leopard I've tried to recover my Mac HD via Time Machine (exactly as described by David Pogue on page 242 of the Leopard Missing Manual). However, "Restore system from backup" in the Utilities Menu of my original Leopard installation DVD failed to show up. What can I do?
Any assistance will be greatly appreciated -
Ballant

Hi Ballant,
I'm not very good with TM, nor a fan of it, but our resident king of TM, Pondini, has a vast array of very well done TM trouble shootings...
http://pondini.org/TM/Troubleshooting.html

Did Lion eliminate the finger gestures for show the previous page and show the next page? I've checked system settings for the track pad and it looks like the got rid of one of my favorite finger gestures when browsing the internet. How do I get it back

I've upgraded to LION. It looks like LION eliminates the finger gestures within internet browsing that used to yield navigating to the previous page or navigating to the next page. I think it was a 3 finger swipe to the left and a 3 finger swipe to the right. It looks like this has been eliminated. I've gone into the system preferences and went through all the new settings for the track pad finger gestures. I've not found a combination that allows me to swipe on the track pad to do the page forward / page back function.
How to I get this back? I was my favorite one and now I can't get there!

For going back to the previous page try a 2-finger gesture. Two fingers in the other direction will take you back.
cornelius

Error Occured. Please check your settings and try again while opening a RTF

Hi,
I'm having the above error while opening a template in MS-Word to create BIP Reports. I see a lot of messages on the BIP forum with similar error. Could anyone over there help on this issue please.
Thanks
Aravind

Can you throw in more detail? I mean exact step step by process that you folowed.
Thanks, Naveen Gagadam.

Loading failed, Please check your page for Javascript Errors

Hi I created a page in Adobe Edge. I need to amend it slightly but when I try to open it I get this error. Any ideas why? I haven't changed the folder or altered anything since I opened it last? Any advice would be great - its really frustratring! I have seen the other link, but just wondered if there is any easier way to figure it out. I'm not a programmer so don't really understand what I'm looking for. Thanks

Hi ,
You can check this link - http://blogs.adobe.com/edge/2012/01/04/why-cant-it-just-work/
One helpful post could be - http://forums.adobe.com/thread/1203311
Thanks and Regards,
Sudeshna Sarkar

System Image Backup Failed During Backup

I have a 2 year old HP pavilion g series notebook. I was doing a system image backup onto dvd+r disks. It was nearly finished when on disk #99 I got this message "The Backup Failed. The system cannot find the path specified (0x80070003)
My computer is out of warranty and I'm out $60 in disks if they can't be used. I need to know it there is a way to salvage what I saved and restart Image backup from where it left off?
Product: A6Z59UA #ABA
Model: g61d60us
This question was solved.
View Solution.

Hi CherylLyme,
Welcome to the HP Forums!
I would like to take a moment and thank you for using the forum, it is a great place to find answers.
For you to have the best experience in the HP forum, I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I understand that you were doing an image backup and when it was nearly finished you received the error (0x80070003). Here is a link to a Microsoft answer to assist you. Windows backup error 0x80070003 ( Answered by Vinod N)
I am unsure if you would be able to start again and pick up on disk 99, as once you have repaired it, it will have changed from when you first ran the backup. The disk you used were not read, writeable, so you would not be able to reuse them. You may find that an external drive would be a more economical way to do your backups. The data would be in one place and easier to store. If you decide to use a USB stick it must not be more then 32GB and will not say Windows 8 on it.
You can most likely purchase an External drive for about the cost of replacing the disks. Here is a link to HP Shopping External storage , but you can purchase one at many places, computer shops, Staples,Walmart, and Office Depot are just a few. I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Backup failed - "Please check system settings"

Similar Messages

Maybe you are looking for