Backup Job Cisco ISE

Good afternoon,
Is it possible to delete/stop a running FullBackupOnDemand-Job in Cisco ISE?

If you want to delete the backup from repository then these are the steps
Step 1 Choose Administration > System > Maintenance.
Step 2 From the Operations navigation pane on the left, click Repository.
The repositories listing page appears.
Step 3 Click the radio button next to the repository that you want to delete, then click Delete.
Cisco ISE prompts you with the following message:
Are you sure you want to delete this repository?
Step 4 Click OK to delete the repository.
The following message appears:
Repository was deleted successfully.
The Repository List page appears and the repository that you deleted will no longer be listed in this page

Similar Messages

Taking Backup of Cisco Identity Service Engine (ISE)

Hello
I would like to know about taking backup of Cisco ISE.
What are the things I can take backup of ?
Thanks

Backup Data Type
Cisco ISE allows you to back up data from the primary or standalone Administration node and from the Monitoring node. Backup can be done from the CLI or user interface.
Cisco ISE allows you to back up the following type of data:
Configuration data—Contains both application-specific and Cisco ADE operating system configuration data.
Operational Data—Contains monitoring and troubleshooting data.
Restore operation, can be performed with the backup files of previous versions of Cisco ISE and restored on a later version. For example, if you have a backup from an ISE node from Cisco ISE, Release 1.2, you can restore it on Cisco ISE, Release 1.3.
http://www.cisco.com/c/en/us/td/docs/security/ise/1-3/admin_guide/b_ise_admin_guide_13/b_ise_admin_guide_sample_chapter_01100.html#reference_4F69987D3294499E95C1B652C4D1E73D

Cisco ISE backup failing

Has anyone seen this error while taking backup of Cisco ISE?
An error has occurred: CARS_XM_SSH_CONNECT : -306 : SSH connect error
Connectivity to repository is fine as I can see repository contents when I do : "show repository <repository name>", but while taking backup, I am seeing above error...Repository has RW permissions for everybody. Any ideas?

did we change the sftp server recently? What vendor are we using? In case you have solarwinds then make sure you have scp and sftp both the protocols selected.
Solarwinds server config
File>configure>General Tab>Allowed Protocols>Select "Both" from Dropdown to select SCP and SFTP.
Jatin Katyal
- Do rate helpful posts -

Cisco ISE 1.2 - NFS Backup

I'm trying to use NFS to backup Cisco ISE on a schedule but I'm having difficulty. I'm not sure what the settings should be or the proper syntax.

Hello David,
Please share your ISE running configuration to find and verify syntex.
Source or destination URL for an NFS network server. Use url nfs://server:path1.
Server is the server name and path refers to /subdir/subsubdir. Remember that a colon (:) is required after the server for an NFS network server.
Also please reverify below required format:
The path must be valid and must exist at the time you create the repository. The following three fields are required depending on the protocol that you have chosen.
–ServerName—(Required for TFTP, HTTP, HTTPS, FTP, SFTP, and NFS) Enter the hostname or IPv4 address of the server where you want to create the repository.
–Username—(Required for FTP, SFTP, and NFS) Enter the username that has write permission to the specified server. Only alphanumeric characters are allowed.
–Password—(Required for FTP, SFTP, and NFS) Enter the password that will be used to access the specified server. Passwords can consist of the following characters: 0 through 9, a through z, A through Z, -, ., |, @, #,$, %, ^, &, *, (, ), +, and =.

Help with cisco ISE 1.1.2.145 patch-3 to ISE 1.2.0.899-2-85601 upgrade procedure

Need help from ISE experts/gurus in this forum.
Due to a nasty bug in Cisco ISE (bug ID CSCue38827 ISE Adclient daemon not initializing on leave/join), this bug will make the ISE stopping working completely and a reboot is required (very nice bug from cisco) . This leaves me no choice but to upgrade to version 1.2.0.899-2-85601.
Scenario:
- 4 nodes in the environment running ISE version 1.1.2.145 patch 3
- node 1 is Primary Admin and Secondary Monitoring - hostname is node1
- node 2 is Secondary Admin and Primary Monitoring - hostname is node2
- node 3 is Policy service node - hostname is node3
- node 4 is Policy service node - hostname is node4
Objective: Upgrade the ISE environment to ISE version 1.2 with patch version 1.2.0.899-2-85601.
My understand is that I have to upgrade the existing environment from ISE version 1.1.2.145 patch 3
to ISE version 1.1.2.145 patch 10 (patch 10 was released on 10/04/2013) before I can proceed with
upgrading to ISE version 1.2 and patch it with 1.2.0.899-2-85601.
Can I patch my exsiting environment from 1.1.2 patch 3 to patch 10 prior to upgrading to version 1.2.0.899-2-85601?
I look at Cisco website and patch 10 was released on 10/04/2013 while version 1.2 was released back in 07/05/2013.
I am trying to get a definite answer from Cisco TAC but it seems like they don't know either.
Question #1: How do I proceed with upgrading the current ISE environment from 1.1.2.145 patch 3 to 1.1.2.145 patch 10?
Propose solution:
step #1: make ISE node1 to be both Primary Admin and Primary monitoring. ISE node2 is now Secondary Admin and Secondary Monitoring.
         Then go ahead and apply ISE version 1.1.2.145 patch 10 to ISE node2 via the GUI,
step #2: Once ISE node2 patch 10 is completed, make node2 Primary Admin and Primary Monitoring. At this point, apply ISE 1.1.2.145 patch 10
         to ISE node1 via the GUI,
step #3: Once ISE node1 patch 10 is completed, make node1 Primary Admin and Secondary Monitoring and node2 Secondary Admin and Primary Monitoring,
step #4: apply ISE 1.1.2.145 patch 10 to ISE Policy Service node3. Once that is completed, verify that node2 is working and accepting traffics,
step #5: apply ISE 1.1.2.145 patch 10 to ISE Policy Service node4. Once that is completed, verify that node2 is working and accepting traffics,
Question #2: How do I proceed with upgrading the current ISE environment from 1.1.2.145 patch 10 to ISE version 1.2 with patch version 1.2.0.899-2-85601?
Propose solution:
step #1: Make ISE node1 the Primary Admin and Primary monitoring. At this point ISE node2 will become Secondary Admin and Secondary Monitoring
step #2: Perform upgrade on the ISE node2 via the command line "application upgrade <app-bundle> <repository>". Once ISE node2 upgrade is completed, it will
          form a new ISE 1.2 cluster independent of the old cluster,
step #3: Perform upgrade on the ISE Policy Service node3 via the command line "application upgrade <app-bundle> <repository>". After the upgrade the ISE
          Policy Service Node3 will automatically joins the ISE node2 which is already in version 1.2
step #4: Perform upgrade on the ISE Policy Service node4 via the command line "application upgrade <app-bundle> <repository>". After the upgrade the ISE
          Policy Service Node4 will automatically joins the ISE node2 which is already in version 1.2
step #5: At this point the only node remaining in the 1.1.2.145 patch 10 is the ISE node1 Primary Admin and Primary Monitoring
step #6: Check and see if there are any more PSN's registered in ISE node1 (there should not be any)
step #7: Perform the upgrade on the ISE node1 from command line "application upgrade <app-bundle> <repository>"
step #8: Once upgrade on ISE node1 is complete, ISE node1 will automatically join the new ISE 1.2 cluster,
step #9: Make ISE node1 Primary Admin and Secondary and ISE node2 Secondary Admin and Primary Monitoring,
Question #3: How do I proceed with upgrading the current ISE environment from 1.2 patch0 to 1.2.0.899-2-85601?
Propose solution:
step #1: make ISE node1 to be both Primary Admin and Primary monitoring. ISE node2 is now Secondary Admin and Secondary Monitoring.
         Then go ahead and apply ISE 1.2.0.899-2-85601 to ISE node2 via the GUI,
step #2: Once ISE node2 1.2.0.899-2-85601 is completed, make node2 Primary Admin and Primary Monitoring. At this point, apply 1.2.0.899-2-85601
         to ISE node1 via the GUI,
step #3: Once ISE node1 patch 10 is completed, make node1 Primary Admin and Secondary Monitoring and node2 Secondary Admin and Primary Monitoring,
step #4: apply ISE 1.2.0.899-2-85601 to ISE Policy Service node3. Once that is completed, verify that node2 is working and accepting traffics,
step #5: apply ISE 1.2.0.899-2-85601 to ISE Policy Service node4. Once that is completed, verify that node2 is working and accepting traffics,
does these steps make sense to you?
Thanks in advance.

David,
A few answers to your questions -
Question 1: My recommendation is to follow vivek's blog since most fixes and upgrade steps are provided there - I would recommend installing the patch that was release prior to the 1.2 release date since the directions to "install the latest patch" would put you at the version of when the ISE 1.2 was released
https://supportforums.cisco.com/community/netpro/security/aaa/blog/2013/07/19/upgrading-to-identity-services-engine-ise-12
You do not have the ability to install ISE patch through the GUI on any of the "non-primary" nodes (you can use the cli commmand to achieve this), the current patching process was designed so you can install the patch on the primary admin node and it will then roll the patches out to the entire deployment (one node at at time). I painfully verified this by watching the services on each node and when a node was up and operational the next node would start the patching process. First the admin nodes then the PSNs.
Every ISE upgrade that I have attempted as not been flawless and I can assure you that I have done an upgrade on 1.1.2 patch 3 and this worked fine, however I used the following process. You will need the service account information that is used to join your ISE to AD.
I picked the secondary admin/monitoring node and made it a standalone node by deregistering (much like the old procedure) in your case this will be node2.
I backed up the certificates from the UI and the database from the CLI (pick the local disk or ftp-your choice).
I reset the database and ran the upgrade script (since I did not have access to the vsphere console or at the location of the non UCS hardware [for a 1.1.4 upgrade]).
Once the upgrade was completed I then restored the 1.1.x database, ISE 1.2 now has the ability to detect the version of the database that is restored and will perform the migration for you.
Once the restore finished, I then restored the certificate and picked one of the PSNs
backup the cert,
Had the AD join user account handy
reset-db,
and run the upgrade script.
Once that is done I then restore the cert
Join the PSN to the new deployment
Join both nodes to AD through primary admin node
Monitor for a few days (seperate consoles to make sure everything runs smooth)
If anything doesnt look or feel right, you can shut down the 1.2 PSN and force everything through the existing 1.1.2 setup and perform some investigation, if it all goes smooth you can then follow the above step for the other two nodes, starting with the last PSN and the the last admin node.
Thanks and I hope that helps,
Tarik Admani
*Please rate helpful posts*

Cisco ISE - General Info. & capabilities

Hello All,
I've read quiet a bit of ISE features, but would like to know the following:
1. Can ISE provide/track details of user activity, like which servers/websites he accessed over a period of time?
2. Can it provide details of how much data was transferred from a particular server to a specific client?
3. For a 1500 user env. (1000 desktops and 500 wireless devices) which model of ISE would be appropriate?
4. How would having ISE be different from already deployed authentication services like Active Directory or built-in application authentication for solutions like Oracle ERP systems?
5. I see ISE as being marketed primarily for wireles devices (BYOD), but how would it help for wired devices (or does it become and unecessary authentication level apart from AD, switch based 802.1x, etc)
Thank you.
Regards,
Adnan

Cisco ISE is a consolidated policy-based access control system that incorporates a superset of features available in existing Cisco policy platforms. Cisco ISE performs the following functions:
•Combines authentication, authorization, accounting (AAA), posture, and profiler into one appliance
•Provides for comprehensive guest access management for the Cisco ISE administrator, sanctioned sponsor administrators, or both
•Enforces endpoint compliance by providing comprehensive client provisioning measures and assessing device posture for all endpoints that access the network, including 802.1X environments
•Provides support for discovery, profiling, policy-based placement, and monitoring of endpoint devices on the network
•Enables consistent policy in centralized and distributed deployments that allows services to be delivered where they are needed
•Employs advanced enforcement capabilities including security group access (SGA) through the use of security group tags (SGTs) and security group access control lists (SGACLs)
•Supports scalability to support a number of deployment scenarios from small office to large enterprise environments
The following key functions of Cisco ISE enable you to manage your entire access network.
Provide Identity-Based Network Access
The Cisco ISE solution provides context-aware identity management in the following areas:
•Cisco ISE determines whether users are accessing the network on an authorized, policy-compliant device.
•Cisco ISE establishes user identity, location, and access history, which can be used for compliance and reporting.
•Cisco ISE assigns services based on the assigned user role, group, and associated policy (job role, location, device type, and so on).
•Cisco ISE grants authenticated users with access to specific segments of the network, or specific applications and services, or both, based on authentication results.
ISE 3315 can support 1500 users with appropriate license.

Cisco ISE managing configuration

Is there a built-in mechansim for revision control in Cisco ISE? If not built-in, then what is the other way? I have been trying to look for documentation online but didn't find any.
Just to explain what I am looking for:
A way to properly manage all the configuration changes to ISE node. Changes are usually identified by a number or letter code, termed the "revision number". For example, an initial set of files is "revision 1". When the first change is made, the resulting set is "revision 2", and so on. Each revision is associated with a timestamp and the person making the change. Revisions can be compared, restored, and with some types of files, merged.
I ask this because "show run" output in ISE CLI does not give all the configuration details. How can we maintain the history of configurations?
PS: I rate useful posts
Thanks,
Kashish

There is not a way to track which version a specific ISE configuration is on. The ADE-OS configuration, or cli configuration typically is static once the repositories, dns info...etc is all set and done. For the application database you can setup a timer where an automatic backup is generated, from there you can manage what dates a backup is good for.
Thanks,
Tarik Admani
*Please rate helpful posts*

Cisco ISE Deployment suggestion required

Require Assistance on Cisco ISE Deployment for below scenario
-- We have Three Cisco ISE Appliances and Client has taken Advance Subscription License for 500 users
-- Client has DC & DR and needs to deploy the Cisco ISE in one Main Office which connects to DC & DR on MPLS Links
-- Client suggestion was to deploy one ISE node ( Admin + M&T + Policy Server ) in DC and its Standby Secondary in DR
     and only deploy Policy Server in Main Office.
     Idea behind the design is that ,
     1) If DC fails , Cisco ISE related logs will get generated on DR and any Cisco ISE related request will be taken care by Local Policy Server in Main Office .
      2) If Local Policy Server Fails , then ISE node in DC will act as Secondary backup and DR will act Teritary Backup
      below is view
                                     DC
                        Primary Node with Role
                   [Admin , M&T , Policy Server]
                                                                                                             Main Remote Offic
                                                                                                              Cisco ISE Node ( Only Policy Server) -----------> Network Devices
                               DR
                       Secondary   Node with Role
                   [Admin , M&T , Policy Server]
Please let me know is it possible

Yes, The scenario is quite achievable also please review the below link for assistance on deployment of ISE.
http://www.cisco.com/en/US/solutions/collateral/ns340/ns414/ns742/ns744/docs/howto_50_ise_deployment_tg.pdf
http://www.cisco.com/en/US/docs/security/ise/1.0/install_guide/ise10_deploy.pdf

How To Migrate Cisco Clean Access to Cisco ISE

We have a Cisco Clean Access 3.6.3 (3140 Appliance) in which we would love to migrate to Cisco ISE 1.1 (3315 Appliance). Does anyone have an idea on how to do this?
I was wondering if I need to upgrade the a later version of Cisco Clean Access and them back it up the CCA. Backup the CCA and then restore/import the backup to the ISE.
Any help will be greatly appreciated?
Thanks.

Hi Mate,
Refer to below instructions for hosting licenses on ISRs:
http://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/software-activation-on-integrated-services-routers-isr/white_paper_c11_556985.html#wp9001047
Rehosting a License
Prerequisites:
• Valid Cisco.com account (username/password)
• Retrieve Product Id and Serial Number with either the IOS "show license udi" command or label tray from both the source and destination devices.
• Retrieve Source Device Credentials by issue the following IOS commands in exec mode:
– license save credential flash0:CredentialFileName
– more flash0:CredentialFileName
• The source device has rehostable licenses.
Rehosting a License with Cisco's Licensing Portal
This process can be used when the source and the destination device cannot communicate directly with Cisco licensing portal
Summary Steps:
1. Obtain UDI and device credentials from the source and destination devices using IOS CLI commands
2. Contact the Product License Registration page on Cisco.com and enter the source Device Credentials and UDI into the license transfer portal tool.
3. The portal will display licenses that can be transferred from the source device.
4. Select the licenses that need to be transferred. A permission ticked is issued. You can use this permission ticket to start the rehost process using Cisco IOS c for any further help.ommands.
5. Apply the permissions ticket to the source device using the license revoke command. The source device will then provide a rehost ticket indicating proof of revocation. A sixty day grace period license is also installed on the device to allow enough time to transfer the licenses to destination device.
6. Enter the rehost ticket into the license transfer portal tool on Cisco.com along with destination device UDI.
7. Receive the license key via E-mail
8. Install the license key on the destination device.
You can also email [email protected]
-Terry
Please rate all helpful posts

Cisco ISE monitoring Logs

Hi All,
I want to backup all the radius logs before upgrading of the ISE from 1.0.4 to 1.1.0. I have already took a back up of application data.
From Gui under Monitoring Node-->full backup on demand
1)Is that all for the radius logs?
2)If I have upgraded to 1.1.0, will the radius logs be lost?
3)If I want to restore the radius logs in version 1.1.0, can I use the data restore under monitoring node and restore the logs taken from version 1.0.4?
Please advise
Thanks

Duplicate posts.
GO here: http://supportforums.cisco.com/discussion/12144361/cisco-ise-monitoring-logs

Remote Access VPN posturing with Cisco ISE 1.1.1

Hi all,
we would like to start using our ISE for Remote VPN access.
We have run a proof of concept with the ISE & IPEP with a Cisco ASA5505. We got the authentication working however posturing of the client did not work.
That was a few months ago and so I was wondering whether any design document is available specifically around Using the Cisco ISE for Authenticating & Posturing Remote Access VPN clients.
I understand that version 9 of the ASA code is supposed to eliminate the need for Inline Posture, does anyone know whether this will also allow posturing too?
We do intend to by Cisco ASR's aswell, but I am sceptical of this as i do not know how many VPN licenses you get out of the box. The ASA's we have allow up to 5000 IPSec VPNs without having to purchase any licensing. What I do not want to do is to switch to SSL VPNs as this again will increase cost.
I know ISR's are support NADs but what about ASRs? There is no mention.
Any advise will be appreciated!
Mario

OK, I have come accross the Cisco Validated design for BYOD and in there it has a section about Authenticating VPNs.
thats great... however it does not mention using the Inline posture node. Does anyone know if there is a limitation using Inline Posture and SSL VPNs...?
essentially my requirements are
2-factor authentication VPN using a Certificate & RSA Token
Posturing of the VPN endpoint.
Ideally i would like to use IPSec VPNs as i have licenses already for these on my ASAs. But if it will only work with SSL & AnyConnect, then so be it.
Can anyone help?
Mario

Error: Sheduled Backup Job Problem

Dear all.
I've been getting a problem with a scheduled backup job through OEM since yesterday which I'm not able to find out why as it was working fine. When I access OEM I can see that I have a problem execution and when I investigate why it says "Unable to perform the backup because the database is closed". But my db is open for sure and I'm able to execute the backup from RMAN command line normally. I shut my db down and started it up again but didn't work. Does anybody know why this is happening?
OS: Oracle Enterprise Linux 5
DB: Oracle Database 10g
Thanks a lot.

**** Job Definition ****
Status: Scheduled
Scheduled: 09-Jun-2009 20:00:00 o'clock GMT-03:00
Repeating: Daily beginning 09-Jun-2009 20:00:00 (because I changed to do tests)
Type: Database Backup
Owner: SYS
Description: Whole Database Backup
Database Connect String: (DESCRIPTION=(ADDRESS_LIST=(ADDR...
Version 10g or higher: YES
Backup Strategy: advanced
Offline Backup: NO
Blackout: NO
Database Name: ORCL
**** Script ****
$rman_script="backup incremental level 0 cumulative device type disk filesperset = 3 tag '%TAG' database;
backup device type disk filesperset = 3 tag '%TAG' archivelog all not backed up;
allocate channel for maintenance type disk;
delete noprompt obsolete device type disk;
release channel;
&br_save_agent_env();
&br_prebackup($l_db_connect_string, $l_is_cold_backup, $l_use_rcvcat, $l_db_10_or_higher, $l_backup_strategy, "TRUE");
my $result = &br_backup();
exit($result);

Error in Backup job scheduling in DB13

Hi All
Backup job scheduled in DB13 kicks error ,I am using Oracle as database and ERP6.0
database and application are on diffrent servers.Before it was working fine,I didn't changed any password
I can run backupjob sucessfully directly from BRtools on database server.Please provide any hint
Job started
Step 001 started (program RSDBAJOB, variant &0000000000060, user )
No application server found on database host - rsh/gateway will be used
Execute logical command BRBACKUP On host DLcSapOraG08
Parameters:-u / -jid INLOG20090120204230 -c force -t online -m incr -p initerd.sap -w use_dbv -a -c force -p in
iterd.sap -cds -w use_rmv
BR0051I BRBACKUP 7.00 (31)
BR0128I Option 'use_dbv' ignored for 'incr'
BR0055I Start of database backup: bdztcorv.ind 2009-01-20 20.42.31
BR0484I BRBACKUP log file: D:\oracle\ERD\sapbackup\bdztcorv.ind
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.32
BR0301E SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance ERD failed
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.32
BR0301E SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
BR0310E Connect to database instance ERD failed
BR0056I End of database backup: bdztcorv.ind 2009-01-20 20.42.32
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.32
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.32
BR0291I BRARCHIVE will be started with options '-U -jid INLOG20090120204230 -d disk -c force -p initerd.sap -cds -w use_rmv'
BR0002I BRARCHIVE 7.00 (31)
BR0181E Option '-cds' not supported for 'disk'
BR0280I BRARCHIVE time stamp: 2009-01-20 20.42.33
BR0301W SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
BR0310W Connect to database instance ERD failed
BR0007I End of offline redo log processing: adztcorw.log 2009-01-20 20.42.32
BR0280I BRARCHIVE time stamp: 2009-01-20 20.42.33
BR0005I BRARCHIVE terminated with errors
BR0280I BRBACKUP time stamp: 2009-01-20 20.42.33
BR0292I Execution of BRARCHIVE finished with return code 3
External program terminated with exit code 3
BRBACKUP returned error status E
Job finished

Hi,
not sure if the recommendations given will address this issue.
You are getting this error:
BR0301E SQL error -1017 at location BrDbConnect-2, SQL statement:
'CONNECT /'
ORA-01017: invalid username/password; logon denied
the log file indicates:
> No application server found on database host - rsh/gateway will be used
This indicated that the user that is connecting from the AS to the DB server is not properly configured to perform the DB tasks on it.
So, first question would be to know if you have configured a gateway on the DB server and how, or if you are using remote shell.
Second question, you can do backups on the DB server.
> I can run backupjob sucessfully directly from BRtools on database server
How did you run exactly the backup job (what is the exact command line, what is the exact OS user that executed it)?
What is the OS of the DB server?
I have reread your post, your OS is windows therefore you fall in the "typical" error in Windows.
You have executed your backup as <sid>ADM and it works. Unfortunatelly, in windows, SAP is exectuted by SAPSERVICE<sid>, and this is the user who should be connecting to your DB server, and this is the user who cannot execute the backup.
The fact that you can run the backup with <sid>ADM in Windows does not means that you have SAPService<sid> properly configured.
For the error (see before) I think your ops$ user for this user is not properly configured in the DB server. take a look at the note mentioned by KT and pay attention to the SAPSERVICE<sid> configuration
Edited by: Fidel Vales on Jan 24, 2009 12:45 AM

Creating backup Job with DBMS_SCHEDULER

Hello,
Can someone please help me out here:
I'm using Oracle10g release 1 on windowsXP
I'm trying to create a backup job with dbms_scheduler and it's not working.
This is what I did:
I created a job as follows:
BEGIN
dbms_scheduler.create_job (
job_name => 'RMAN_FULL',
job_type => 'EXCUTABLE',
job_action => 'E:\wkdir\rman_bkp',
enabled => TRUE,
start_date => '24-NOV-2007 2:10:00 PM',
repeat_interval => 'FREQ=WEEKLY',
comments => 'Full Database Backup');
END;
While rman_bkp is an RMAN command but it wasn't working.
Please where do I get it wrong?
Kindly put me through the EXECUTABLE or should I use PL/SQL_BLOCK and how?
Thanks.
Regards,
Cherish

Hi,
There is a guide to running external jobs using the Scheduler here
Guide to External Jobs on 10g with dbms_scheduler e.g. scripts,batch files
You need to use the full path to a real Windows executable and the arguments to it e.g. for a batch script you would have to do something like
c:\windows\cmd.exe /q /c c:\myscript.bat
There is a forum dedicated to the Scheduler here
Scheduler
Hope this helps,
Ravi.

Error when scheduling backup job in OEM

We have Oracle 11.2 RAC on Redhat Linux. I was creating an customized backup job and get the errorsORA-01476: divisor is equal to zero
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7544
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 7699
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8211
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8342
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8503
ORA-06512: at "SYSMAN.MGMT_JOB_ENGINE", line 8570
ORA-06512: at "SYSMAN.MGMT_JOBS", line 273
ORA-06512: at "SYSMAN.MGMT_JOBS", line 86
ORA-06512: at line 1 The backup command is created by OEM as backup incremental level 0 cumulative device type disk filesperset = 5 tag '%TAG' section size 500 M database;
backup device type disk filesperset = 500 tag '%TAG' section size 500 M archivelog all not backed up;
allocate channel for maintenance type disk;
delete noprompt obsolete device type disk;
release channel; Actually using other ommand also get the same error.
What is wrong? I scheduled backup job before on this server and it worked.

This may be due to that the schedule frequecy is not set. Make sure Frequency Type and Repeat Every boxes get filled properly.

Backup Job Cisco ISE

Similar Messages

Maybe you are looking for