Backup Method Suggestion

I was wondering if anybody could tell me an easy way to back my Mac Book Pro up to a Linux server I have? I have thought of rsync but have read of some issues that arise with using it. Does anyone have any ideas?

You would need to install and configure the "netatalk" service for Linux. Many linux distributions come with the netatalk package installed, but you can get it and many tutorials on its installation on the internet. Here are several pages on it:
http://viebrock.ca/article/22/file-sharing-from-linux-to-os-x-a-quick-guide
http://www.disgruntled-dutch.com/2007/general/how-to-get-your-linux-based-afp-se rver-to-show-up-correctly-in-leopards-new-finder
Here's one where someone used Ubuntu and netatalk to create a Time Machine server, which might be the best tutorial to check out:
http://www.kremalicious.com/2008/06/ubuntu-as-mac-file-server-and-time-machine-v olume/

Similar Messages

  • Backup method in Noarchive mode

    Hi All,
    I have one question regarding backup methods. I have my all database in Oracle11gR2 in Noarchive mode. I want to define some backup method but no idea which one is preferable in noarchive mode. Cold backup is again not possible. can I take tablespace/datafile backup ? Is there any other option which I can perform in Noarchive mode or temporarily put the database in Archive and perform the backup?
    Please guide me.
    Thanks...

    user12115 wrote:
    Hi All,
    First of all thanks for your reply and suggestions. I have not lost the interest but reading and thinking on all your suggestion.
    About expdp yes I think this is the only option I was thinking before post a question here. but as we know this is should not consider as a backup.
    For Archive mode - this is R&D database and we have disk space issue if we can not put database in Archive mode.
    For COld backup - again not possible because single database uses in different time zone so DB should be up and running almost all the time.I think the operative word there is "almost". How big is the database? How long does it take to shut it down, back it up, and bring it back up? Unless the database is really big (why would an r&d database be really big, unless r&d was specific to VLDB) you should be able to do the job during the guy's lunch break. Even for an r&d database, you might be able to justify noarchivelog, but you will really feel the pain if you get a physically corrupted database and all you have is an export.
    >
    The only one option which I am not aware is what about John speicified. John can you please suggest or forward me some link with some backup example for more details. this is really helpful to me. From your suggested link I understand this is possible but after put the database in suspend mode how do I copy the Tablespace/datafiles - just simple Linux cp command or some other options also?
    Edited by: user12115 on Mar 5, 2013 5:08 AM
    Edited by: user12115 on Mar 5, 2013 5:15 AM

  • I just upgraded to Yosemite, downloaded iPhoto 9.6 and get this promptYour photo library is damaged or unreadable and cannot be opened. Please restore from a backup. Suggestions?

    I just upgraded to Yosemite, had to upgrade my iPhoto so downloaded iPhoto 9.6. My photo library needs to be upgraded to work with this new version of iPhoto but when it started to upgrade, this prompt appeared -Your photo library is damaged or unreadable and cannot be opened. Please restore from a backup.
    Suggestions?

    Try download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
    This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
    Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. 

  • Backup schedule will not use faster backup method

    Hello,
    I am currently using Windows Server Backup in Windows Server 2008 R2 to make a copy of our Exchange server. When I initially set the schedule it was configured to use the normal backup method, but after noticing that it was taking an exceedingly long time
    I went into the Performance settings and selected the Faster backup option.
    The faster method works great if I use the Backup Once option, but for some reason the scheduled backups still try to run the normal, non-incremental backup. I can't find where to change this in the schedule. 
    **I know that the first time you run the faster backup it needs to make the full backup. It has done this(it takes about 3 days) and every time I have run it since using the Backup Once option it has worked fine(takes about 1 hour). Once again, the issue
    is that the schedule will not use the faster option and tries to use the normal backup every time.
    Thank you

    I am backing up to a network location. When I use the Backup Once option and assign it to use a network location it is able to do the Faster backup. It doesn't make sense that the faster backup works when I do it manually but doesn't work when if it is
    initiated by the schedule. They are both going over the network.

  • FULL RECOMMENDED BACKUP METHOD

    I did the following:
    Logged out of both Skype accounts, quit both, and checked no Skype process running.
    Copied everything from C:\Users\[my name]\AppData\Roaming\Skype to my external drive, including the main.db files for both accounts.
    Uninstalled Skype.
    Installed SkypeSetupFull.exe (not SkypeSetup.exe) from Download.com.
    Copied everything back from my external drive to C:\Users\[my name]\AppData\Roaming\Skype, including the main.db files for both accounts.
    Logged into both accounts again.
    Is this all data?
    Is it the optimal backup method?
    Favorites doesn't have any contacts now.
    I did have custom lists for contacts, but haven't now.
    I don't see any call history or have anything under Recent Conversations.
    Options are their defaults.
    My unused credit isn't displayed top left next to my name, though it is in My Account.
    This is the case for both accounts.
    I installed Database Browser & DB Browser for SQLite, but wasn't technically-minded enough to know how to use them.
    I've come across software that may help in future, but I thought Skype might have been designed to make the job easier than this.
    I'd be really pleased if anyone could help. Replies to this might answer many other people's backup questions too.
    Andrew.

    56 views and no solution?! I'm amazed that Skype doesn't have Backup & Restore in the Options, or even tell us the optimal backup method.
    Do moderators not even know the answer?
    Andrew.

  • The iTune cannot detect my iPhone. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

    The iTune cannot detect my iPhone 4S. I have already tried all methods suggested, including re-installling iTune, re-activating Apple Mobile Device, plugging in various USB ports, and etc. I use windows 7. How can I solve this?

    The new cable is completely new, and my computer can detect the phone as a drive, and battery charging is ok. So I believe the USB cable works properly. It is so weird that just iTune itself cannot detect the phone, and it is of the most updated version. What else can I do? Thanks.

  • CUCM - Supported Backup method

    Hi !
    What are the VMware backup supported by CUCM and other collaborative applications. In doc-wiki it's mentioned till CUCM 10.0 only .
    Any other document which will officially confirm that whether it will support or not ?
    Thanks in Advance !!!

    Hi,
    For UC applications, vm snapshots are not supported and the only supported backup method for CUCM is DRF backup. VM snapshots might lead to performance issues. You could refer below document for more details.
    http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-callmanager/116459-technote-product-00.html
    HTH
    Shenbagarajan

  • A backup method

    Hi all,
    I need a documented backup method for PeopleSoft 9.0, please it´s urgent, I´ll aprice any help.
    Thanks.

    Peoplesoft is many components application.
    1. database, for the backup strategy, please refer to the database vendor recommandations
    2. tools (filesystem), please refer to the host OS vendor recommandations
    3. reports, you should have a backup policy retention for the produced reports
    You should build your own backup strategy, as discussed in your duplicate thread :
    Backup & recovery Peoplesoft
    Nicolas.

  • Recommendations for OneDrive Backup Methods

    So my company just switched over to Office365, and so far things are pretty good. I'm looking to utilize the OneDrive features as a replacement for our individual user drives, currently housed on our server. My issue is this:
    1. Microsoft doesn't recommend using OneDrive as a backup method, therefore I will need to back these drives separately from OneDrive.
    2. According to Microsoft's site, it's not supported or recommended to change the location of OneDrive, so it's forever on the local drive of the user's computer.
    With these issues taken in to account. How am I supposed to backup OneDrive if every drive is on that individual user's computer? It's an administrative nightmare to manually point everything to a server location for easier backup access since users have
    different schedules and some will shut their computers down at night (when a backup would take place) while others don't.
    So, for anyone who has done this already, how do you manage the backups?
    Thanks!

    Hi,
    I'm marking the reply as answer as there has been no update for a couple of days.
    If you come back to find it doesn't work for you, please reply to us and unmark the answer.
    Thanks,
    Melon Chen
    Forum Support
    Come back and mark the replies as answers if they help and unmark them if they provide no help.
    If you have any feedback on our support, please click
    here

  • Backup methods and external hard drive questions

    I usually copy files and photos to DVDs but wonder if that's enough and the most efficient method to back up.  So I purchased a Seagate 1TB external hard drive.  Here are my questions:
    - What is the best way to copy all my data to this hard drive?
    - Is it necessary to copy everything?
    - Is it possible to partition the external hard drive?
    - Is it possible to use this hard drive to copy data from more than one computer, for instance, my powerbook and a PC laptop?  If so, how?
    Any information on this would be so appreciated!

    Here are some suggestions for backup:
    Backup Software Recommendations
    Carbon Copy Cloner
    Data Backup
    Deja Vu
    Silver Keeper
    SuperDuper!
    Synchronize Pro! X
    Synk Pro
    Synk Standard
    Tri-Backup
    Others may be found at VersionTracker or MacUpdate.
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files.
    You can partition the drive if you need to, but that will depend upon why you would need to partition the drive.
    Personally, I would clone your startup volume to the external drive. You can do this with any of the referenced software as well as by using the Restore option of Disk Utility. You can then incrementally update the clone using a backup utility.
    It would be possible to backup more than one computer in which case you would need to partition the drive. Backing up a Windows machine, however, would require partitioning the drive using MBR and formatting it FAT32 (MSDOS).
    For clarification do you really have a PowerBook (PPC machine) or a MacBook (Intel?)

  • 2x 10.5.2 xServe + raid backup solutions  - Suggestions please!

    Hello,
    I'll give a brief overview of what I'm rolling out. *Limited budget* So keep that in mind
    Basically I'm just looking for suggestions on backup solutions for this particular setup. I have been hearing mixed reviews of most backup solutions under 10.5.x... (In 10.4.x server I was relatively confident with Retrospect and had performed restores before).
    --2 xServes, One web server, one for local services like mail, OD, AFP, Cal, etc. each has 2x 80gb drive (boot volume + mirror). Advanced server config.
    --1x raid configured as raid6 with 4TB useable after formatting and parity. Data (user directory, mail store, calendar, web sites and database, etc) will be on the raid volumes, the 80 gb drives in xserves are only for OS and log files.
    --All clients are using MacBook Pro's and most users have minimal data. Most data will be mail and quicktime videos (compressed for web, originals on mini dv tapes).
    --MacBook Pro's already live, current server is SBS 2003 and it handles backups via Retrospect.
    --Backups will have to be D2D, tape is not an option in this case. This means two external drives for backup (one on site and one off site, cycle on friday). Probably 2TB FW800 for each drive as entire raid isn't being backed up, some of it is scratch storage so 2 TB is plenty for now).
    Naturally I want to use time machine but I am hearing of horror stories using time machine to backup advanced server in 10.5. Also seeing issues with cyrus (mail) and time machine (I will be running mail services). In addition, I don't think I could do any sort of cycle with the two external drives using time machine? The lack of configurability in time machine worries me. And finally, I don't know how time machine does with active database' (Ie: sql database for web server, I just don't know if time machine will cause problems when trying to back live database up). If someone has experience with time machine in a similar setup I'd love to hear your thoughts / suggestions.
    Alternatively there is retrospect. We already own a license and I am familiar with administering it on 10.4.x. How reliable is it for backing up 10.5.2 clients and 10.5.2 server? Including active databses (Again the web server sql databases, etc? Kind of a pain restoring anything from retrospect (Especially entire server if / when it has to be done) but it was tried and true for me in 10.4.x server installations.
    These MacBook pro's will also likely become mobile homes once all is said and done (But currently are not as the xServes are not installed yet). Time machine + mobile home directory seems like a lot of data being backed up that is probably redundant?
    To top it all off, until new office is ready (All gigabit when that happens in ~1 year) network is as follows:
    Servers have 100 mbit full duplex connection
    Clients have 10mbit half duplex (This is where time machine really frightens me with hourly client backup).
    Considering above, I can either:
    A: Run proactive backup script from retrospect for all clients and then nightly backup for select raid volume contents + server boot volumes.
    B: Not backup clients directly via retrospect and only backup contents of the raid volume (Which is where the mobile homes will be stored). Mobile home sync would be set to occur on login / logout only (Considering 10mbit client connections, I don't want active or user initiated sync heh).
    Thoughts / suggestions? Thanks in advance, any suggestions are much appreciated. Hardware is set in stone but backup solution is not so most aspects of backup solution can be changed =)

    First of all, thanks for your reply!
    Well I should clarify in that I wasn't going to operate "network" homes and that they were just going to be the mobile homes with sync only occurring at login / logout. Even then, I think I'd run in to issues with the 10base-T for the client systems. The servers are on 100base-T full duplex. Currently All of the Windows systems do the same and logging in / out isn't too terrible but I couldn't imagine actually running the home directories off the server on 10base-T.
    Do you still think mobile homes would be too much with just the login / logout sync? If so, I'll simply avoid this option until we get our new building and gigabit networking all around in the next year.
    You're correct in that all clients will be running 10.5.2.
    If I am not running mobile homes, I suppose the easiest way then is to in fact backup clients via time machine to the raid volume and then backup the entire raid volume (Hence all of our sites, compressed video files and databases to a large external drive (Maybe I'll get a couple 3 or 4 TB raid drives instead... lol). Naturaly I'd select the scratch disk directories and tell time machine to ignore them. Only issue there being that I may run in to space concerns like you say. If it becomes a huge problem and apple still hasn't made TM more configurable by then, I could use the time machine editor app or modify the intervals myself. I'd rather not and will only do this if it becomes an issue
    From what I can gather, time machine is not making complete duplicates of an active database (MS Entourage in this case) and is only backing up the changes. I was worried about how it handled this and whether it would detect a change and just backup the entire database again (Which would be a nightmare if it did this for our web directories as they have active databases running).
    Do you know of time machine will wreak havoc with active databases (Like the ones our websites use, a couple small sql databases and one larger one).
    I think time machine would work well with the method you suggested. So I can just set it to backup all clients to the raid volume and then setup time machine to backup the raid volume to the external disk? For my off site... I suppose I could just bring in the second identical external drive every Friday and copy the time machine backup database from the on site backup drive on to it and then get it out of there each evening.
    As for backing up the servers themselves, they will not be storing much of anything and most everything will be pointed to the raid volume (Hence the 80GB drives). Because of this, the data on the servers themselves will not change THAT much compared to the raid volume which will change drastically every day so full backups of the servers is fine. Perhaps just setting psyncX (assuming it works in 10.5) to backup the 80GB boot volume for each server would be best? I could just set psyncX to backup each server boot volume to the same external drive the raid volume is backing up to and then each friday just copy the data from the on site drive to the external, killing two birds with one stone. (Tape would make this all easier but it isn't gonna happen in this case sigh).
    I worry about the cyrus / mail issues I'm reading about on servers running time machine though.

  • External Backup Method - Alternate procedure

    I normally do a backup of my Macintosh HD partition to an external drive using SD (all files to an image on external drive) and also do a backup of BOOTCAMP when within Win 7 x64 using Acronis True Image (again using all files option to a single file image).
    Naturally both procedures above are executed using 'file by file' backup which is quicker than sector by sector backup. I have a 1TB WD Scorpio Blue stuffed in the Macbook Pro with apprx 700GB partitioned for Mac OS 10.6.5 and the remaining 300GB allocated to BOOTCAMP, the external backup drive is also 1TB with equally matched sized partitions
    I would prefer to change my backup/copy method to just copy the 'entire disk' within the Macbook pro and mirror that to the external disk of the same size, a snap-shot mirror in one foul swoop with no messing about between two different OS's as stated above.
    What would be the best procedure for this?
    Would it involve booting externally from my OS X SL DVD disk and then running a disk copy within the utility? Best practice suggestions appreciated.

    I have indeed had three drives with hardware failure already and another three or more instances where the data and/or structure of the data on the drive, i.e. B-Tree file index structure on a drive, had become corrupted and in some cases could not be repaired by any utility software as it was beyond fixing. First drive hardware failure was a desktop Lacie d2 but luckily it was just one of the connection interfaces that failed (firewire 800), fortunately it had a triple interface and I was able to salvage the data through the USB-2 interface only, this was probably a good thing as the drive was excessively noisy anyway and therefore may not have lasted much longer. Second drive to have hardware problems was a portable WD MyPassport Essential 1TB, for some reason this produced a fault when only a few months old and was not recognised by the OS, however bizarrely if I turned the unit upside down and laying it flat (as these drives are not the standing-up type being portable) and then plugging it back into the Mac, it would then work! Because of this I then got a portable Seagate GoFlex 1TB ultra portable in order to transfer the data from the upside-down WD MyPassport Essential and then take that back to the store, however this turned out to be the worst mistake because the Seagate GoFlex 1TB Ultra portable completely and entirely failed after only a mere 4 weeks of careful use,it would not appear at all on the desktop and no software could help it with some reporting a hardware failure code. It's worth pointing out that a desktop Western Digital MyBook Studio 1TB drive that I've had for some time now has been fine, I've had the MyBook Studio before and during the problems encountered with the two small mobile drives I'v had mentioned above and the MyBook Studio continues to perform well (even with the taxing task imposed by Super Duper when using the convert image to Read-Only mode for backing up all files - you can usually hear the drive become very noisy with the read-write head going ballistic as it converts & compares)
    From the responses to this post I can see there's quite a lot to bare in mind when doing a sector by sector backup, such as replicating file-system errors or damaged data from any bad blocks, non defragmentation. I usually do a verify/repair & permissions repair first, as well as to clean up the system with utility software that runs the Mac daily/weekly & monthly housekeeping scripts in one go, the clearing of logs, resetting and emptying of all browsers and by then some automated background utility has completed it's full disk scan in the background for any bad blocks. To be honest I'm looking forward to the day I can affordably buy a decent 1TB SSD to eliminate the mechanical wear & tear factor with improvements increasing with the performances, wear levelling management, MTBF (mean time before failure - usually 2 million hours/228 years, for decent ones), transfer rates and power saving gains. OWC sell what appears to be a very decently specified 480GB SSD and soon they may have a 1TB version with lower future pricing per GB. Must point out though that Pure Silicon have had a One terabyte 1TB SSD SATA 2.5" 9.5mm MLC (multi layer cell type) drive for 2 years now since January 2009 when it was announced and the even more vastly superior SLC (single layer cell type) at an unheard of 500GB two years ago, but these are for military applications as well as medical, government and specialist enterprise server applications.. so they wont sell you one, but consumer companies are catching up.
    http://www.puresi.com/index.php?option=com_content&view=category&layout=blog&id= 4&Itemid=9
    Anyway, I've been going off subject a little myself here so in light of the different methods available, I think what I'm kinda looking for was a method of just backing up the whole drive in one go without having to do so from within the two separate OS's installed. Also this would be useful if or when I eventually get a 1TB SSD and therefore transfer the Mac OS partition and Bootcamp Windows partition straight over without upsetting them in case there would be problems using other methods. It's obviously not that straight forward doing sector backups, so I will have to experiment when I get another drive. Also being put-off with the failures I've had from previous external drives I'm therefore considering the RAID 1 disk mirroring route for my next external drive (cost permitting though).

  • Best backup method in sap maxdb

    Hi to all,
                      I would like to know what is best backup and restore method in maxdb so that we can restore the data successfully.
    actually i know the process of doing backup with dbmcli commands.  Suggest me best method of doing backup in Maxdb in linux operatiing system.
    Thanks
    Srikanth

    Hi Dear,
    solution of your query is following link.:
    http://www.sapdb.org/7.4/pdf/backrec_eng.pdf
    Regards,
    majamil

  • Backup method in OLTP environment

    Which one of backup strategy would be best for 24/7 OLTP 9i/10g databases with no standby servers on unix clustered machines? Suggestions/comments?

    Hi..
    Which one of backup strategy would be best for 24/7 OLTP 9i/10g databases with no standby servers on unix clustered machines? Suggestions/comments?
    RMAN backup is the easiest and the best method of taking the backup.Some additional features of RMAN are in 10g compared to 9i like for example, you can make the backup pieces compressed, you can use catalog backuppieces in 10g
    for reference
    10g RMAN -- [http://download.oracle.com/docs/cd/B19306_01/backup.102/b14191/part1.htm#i996723]
    9i rman -- [http://download.oracle.com/docs/cd/B10501_01/server.920/a96566/preface.htm#972108]
    HTH
    Anand

  • Backup methods

    I recently bought an external firewire HD (200GB), and I've read some posts about users' methods for backing up their computers, but I had a few specific questions, and I was hoping to get some input and opinions on the issue.
    I read a post a while back that suggested making 4 or 5 partitions on the external HD. The writer roughly suggested the following:
    1) a partition for a rescue disk
    2) a partition for your last good installation
    3) a partition on which you clone your internal HD
    4) a "dump" partition
    What is a rescue disk? Is that just a clean installation of OS X on that partition that you can boot to if your internal HD bites it?
    What's the difference between your last good installation and the clone? Is there one?
    Also, would anyone care to post/discuss their methods and ideas about backing up? I want to know if there is any kind of back-up convetional wisdom I'm not aware of.
    Thanks,
    chris.
    PowerBook G4 12   Mac OS X (10.4.3)  

    Hi detractosmith
    Hmmm... personally I would not want to put so much potential 'risk' on the one drive. Whilst I do generally agree that it would be good to have the kind of contingencies that your reference outlines, I definitely would not put them all onto the one drive.
    Why? What would happen if your 200GB drive suffered a complete drive failure? You could, potentially, lose everything.
    1. For me I use CDs/DVDs as my rescue disks. These are the original system/installation discs supplied with a PowerBook, a DiskWarrior CD, a Drive Genius CD and a Data Rescue CD
    2. I create disk images of new/clean installations which are either burned to DVD or stored on my file server (which is backed up every night).
    3. I dedicate a whole 60GB portable FireWire drive for this purpose, but I also have a 120GB desktop FW drive that has two partitions on it (one for clones and the other for storing temporary files).
    4. As no. 3
    > What's the difference between your last good installation and the clone? Is there one?
    A good installation will, hopefully, contain just a clean and fresh system with no corrupt files whilst the clone may be a clone of both the system and your files in its current state (which may include unecessary, incorrect and/or corrupt files).
    > Also, would anyone care to post/discuss their methods and ideas about backing up?
    I use Data Backup to do the primary (daily) incremental backup onto four separate FW drives on a rotational basis of my file server (where I store all my PowerBook data). I also archive data off the server onto DVDs at regular intervals.
    In addition to that I also use SuperDuper! to perform weekly and monthly cloned backups of my PowerBook onto external FW drives (60GB and 120GB mentioned earlier).
    Next I use Backup (which comes with a .Mac subscription) to automatically backup some essential data and preferences to my iDisk on a daily basis.
    Finally I also backup new installations onto disk images which are normally stored on a separate drive (on the file server).
    15 1.25G/12 1G PBs, Mac minis, iBooks G3/G4,   Mac OS X (10.4.3)   Cube, TAMs, iPods 2G/4G, iPs, AEBS, AX

Maybe you are looking for