Backup not working for File Server

We have System Center 2012 Sp1 installed with Agent Version : 4.1.3453.0
We are protecting File Server which is member in DFS. We have Volume of More than 2TB and which is spanned accross multiple VHDs.
I am facing problem with Backup not working and DPMRA service is getting stopped unexpectedly. When i try to create recovery point manually i don't get option to syncrhonize the changes. 1st and 3rd option is geryed out.
I am getting Error on DPM as Affected area:   E:\
Description:   The replica of Volume E:\ on<ServerName> is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data
from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
   DPM failed to communicate with the protection agent on <Server> because the agent is not responding. (ID 43 Details: Internal error code: 0x8099090E)
   More information
Recommended action:   1) Check recent records from the DPMRA source in the Application Event Log on FUSE.win2k.internal to find out why the agent failed to respond.
2) Make sure that the DPM server is remotely accessible from <Server>
3) If a firewall is enabled on the DPM server, make sure that it is not blocking requests from <Server>
4) Restart the DPM Protection Agent service on <Server>. If the service fails to start, re-install the protection agent.
   Synchronize with consistency check.
   Run a synchronization job with consistency check...
Resolution:   To dismiss the alert, click below
   Inactivate
I have Re-installed Agent but it is not helping.
I have Other Volume labeled as F: and sized at 600 GB. Backup of that Volume is working fine for Same server.
Please Suggest how to troubleshoot.
Thanks in Advance.
Swapnil
Thanks, Swapnil Prajapati

HI Chris,
Sharing files using Bluetooth
To share files using Bluetooth, you first need to make sure Bluetooth is turned on, and then use Bluetooth File Exchange to send a file.
To turn on Bluetooth:
Choose Apple menu > System Preferences and click Bluetooth.
Select the On checkbox. To allow other Bluetooth enabled devices to “discover” your computer and send files, also select the Discoverable checkbox.
Select “Show Bluetooth status in the menu bar” so you can quickly send files and perform other actions using the Bluetooth status menu in the menu bar.
To send files using Bluetooth:
Choose Send File from the Bluetooth status menu in the menu bar.
If the Bluetooth menu isn’t visible, choose Apple menu > System Preferences, click Bluetooth, and select “Show Bluetooth status in the menu bar.”
In the window that appears, select the file you want to send and click Send.
Select the device you want to send the file to and click Send.
If you don’t see the device you want to send the file to, make sure the device has Bluetooth turned on and is discoverable.
You do not need File Sharing turned on for Bluetooth technology.
Another way to share files between two Macs is How to use Firewire Target Disk Mode
Carolyn

Similar Messages

Oc4jadmin not working for application server control in SOA suite 10.1.3.1.

Hi,
We have installed the SOA suite, and I can login to the various components using oc4jadmin/password (bpel, esb, rules author), but for some reason that oc4jadmin password is not working for Application Server Control, which is the only piece of this I really need to log in to.
Any thoughts on what is going wrong?
Cheers,
Pat Rock

Maybe you change this password internally for another application (such BPEL, WSM,etc) and didn't make change for your main OC4J container.
You can try to change this password by...
1. Open the file [OASHome]\j2ee\home\config\system-jazn-data.xml
2. Find the section that looks like this
[user]
[name]oc4jadmin[name]
[display-name]OC4J Administrator[display-name]
[guid]88836370D11611DC9F30F9C1CD6F1A73[guid]
[description]OC4J Administrator[description]
[credentials]{903}F+iG1A46edXG9RdfY0pD2O4Ge/qyEjsg[credentials]
[user]
3. Replace the value separated by the "Credentials" starting and ending tags with your new desired password, prefixed with an exclamation point
Example:
[user]
[name]oc4jadmin[name]
[display-name]OC4J Administrator[display-name]
[guid]88836370D11611DC9F30F9C1CD6F1A73[guid]
[description]OC4J Administrator[description]
[credentials]!newpassword[credentials]
[user]
4. Save the file and restart OAS
This should not affect other applications.
Greetings.

Monthly and Yearly backups not working for Protection Group?

Hi
We have a Protection Group with 160 members currently attached to it. The group has the following customized Recovery Points:-
- 1 recovery point every 1 day for the last 2 weeks, 1 recovery point every 1 month for the last 60 months and 1 recovery point every year for the last 5 years.
The schedule is as follows:-
- Every Day at 01:00, Every Month on First Day at 01:00 and Every 12 Months on 01 January at 01:00.
The daily tape backups are working fine without issue but neither the Monthly or Yearly backups are being attempted. We have checked the monthly backups for this issue for the last few months and are unable to see any evidence of the Monthly schedule even
running? This means that we are having to manually label the Daily tapes once a month as Monthly tapes but they will then stay on the Reports for the next 5 years as DPM will constantly request these tapes back.
Are you able to help with this matter?
Not that we really want to do this but if we removed the group completely and re-create it would this cause problems with our restore points?

Hi,
This is a known issue that can occur in all current versions of
DPM including DPM 2012, to correct the condition, you simply need to perform this step. Any time before the next scheduled (monthly or longer) backup, manually update
the long term backup schedule by hitting the MODIFY button. The code that runs when modifying the backup schedule redoes the bacup schedules and it fixes the scheduling issue.
Below is a DPM Power-shell script that will show you the scheduled backups for all recovery goals for all protection groups. You can see the last time each recovery goal ran, and the NEXT run time, so you can monitor
the goals and re-fix them if necessary.
NOTE: It takes about 20-30 minutes before the fixed next run time schedule will be populated after modify the protection group and updating the schedule.
# This script will list all currently scheduled backup to tape jobs #
# It will list scheduled, last run and next run dates #
# Note: The script takes in consideration that the DPM Database was installed locally on its #
# Default instance. If SQL is installed on a different location/instance, edit the line #
# that starts with $instance = '.\msdpm2010 #
# Author : Wilson Souza #
# Date Created : 1/13/2012 #
# Last modified : 1/17/2012 #
# Version : 1.0 #
# This version of the script was only tested on DPM 2010 #
param([string] $verbose)
add-pssnapin sqlservercmdletsnapin100
Add-PSSnapin -Name Microsoft.DataProtectionManager.PowerShell
$ConfirmPreference = 'None'
cls
$instance = '.\msdpm2010' # <---- If DPM Database is on a different location, edit this line accordinly
$query = "use DPMDB
go
CREATE FUNCTION label (@GUID varchar(36), @kindred varchar(4), @vault varchar(8))
returns varchar (1024)
as
Begin
declare @result varchar (1024)
select @result = vaUltlabel from tbl_mm_vaultlabel where mediapoolid = @GUID and generation =
case @kindred
when 'Fath' Then '2'
when 'Gran' then '1'
when 'grea' Then '0'
end and
vault =
case @vault
when 'Offsite1' then '3'
when 'Offsite2' then '4'
when 'Offsite3' then '5'
when 'Offsite4' then '6'
when 'Offsite5' then '7'
when 'Offsite6' then '8'
when 'Offsite7' then '9'
else
'1'
end
RETURN @result
END
go
use DPMDB
select ScheduleId as name
,def.JobDefinitionId as JD
,FriendlyName as PG
,SUBSTRING (CONVERT(VARCHAR(10),active_start_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),active_start_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),active_start_date),1,4) as SD
,jobs.date_created as SCD
,SUBSTRING (CONVERT(VARCHAR(10),last_run_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),last_run_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),last_run_date),1,4) + ' ' +
SUBSTRING (CONVERT(VARCHAR(6),last_run_time),1,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),last_run_time),3,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),last_run_time),5,2) as LRD
,SUBSTRING (CONVERT(VARCHAR(10),next_run_date),5,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),next_run_date),7,2) + '-' + SUBSTRING (CONVERT(VARCHAR(10),next_run_date),1,4) + ' ' +
SUBSTRING (CONVERT(VARCHAR(6),next_run_time),1,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),next_run_time),3,2) + ':' + SUBSTRING (CONVERT(VARCHAR(6),next_run_time),5,2) as NRD
,dbo.label ((substring(xml,(patindex('%MediaPoolId%',Xml))+13,36)), (substring(xml,(patindex('%generation%',Xml))+12,4)), (substring(xml,(patindex('%vault%',Xml))+7,8))) as TL
,case
when substring(xml,(patindex('%vault%',Xml))+7,3) = 'off' then 'Long-Term'
else 'Short-term'
end as STLT
,case
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Fath' then 'Recovery Goal 1'
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Gran' then 'Recovery Goal 2'
when substring(xml,(patindex('%generation%',Xml))+12,4) = 'Grea' then 'Recovery Goal 3'
end as RG
from tbl_SCH_ScheduleDefinition sch
,msdb.dbo.sysjobs jobs
,tbl_JM_JobDefinition def
,DPMDB.dbo.tbl_IM_ProtectedGroup prot
,msdb.dbo.sysjobschedules jobsch
,msdb.dbo.sysjobsteps jobsteps
,msdb.dbo.sysschedules syssch
where CAST(sch.ScheduleId as NCHAR (128)) = jobs.name
and def.JobDefinitionId = sch.JobDefinitionId
and def.ProtectedGroupId = prot.ProtectedGroupId
and jobs.job_id = jobsch.job_id
and jobs.job_id = jobsteps.job_id
and jobsch.schedule_id = syssch.schedule_id
and (def.Type = '913afd2d-ed74-47bd-b7ea-d42055e5c2f1' or def.Type = 'B5A3D25C-8EB2-4032-9428-C852DA5CE2C5')
and sch.IsDeleted = '0' and def.ProtectedGroupId is not null
order by FriendlyName, next_run_date, next_run_time
go
drop function label
go"
$result = Invoke-Sqlcmd -ServerInstance $instance -Query $query
$count = 1
write-host " The list below shows all scheduled backup to tape jobs (short term and long term)" -f green
write-host
if ($verbose.ToLower() -eq '')
write-host " For optimun output, set PoweShell Width for screen buffer size to at least 200" -f yellow; write-host
write-host
write-host " Protection Group name Creation Date [Schedule Creation Date] [Last Run Date / time] [Next Sched Run Date/time] Goal type Recovery Goal # Custom Tape Label"
write-host " ------------------------------ ------------- ------------------------ ---------------------- -------------------------- ---------- --------------- -----------------"
foreach ($result1 in $result)
if ($color -eq 'white') {$color = 'cyan'} else {$color = 'white'}
write-host ("{0,2}"-f $count) -foreground green -nonewline
write-host ( " - {0,-30} {1,-13} {2,-24} {3,-24} {4,-27} {5,-10} {6,15} " -f $result1.PG, $result1.SD, $result1.SCD, $result1.LRD, $result1.NRD, $result1.STLT, $result1.RG) -nonewline -f $color
write-host $result1.TL -f yellow
$count++
else
write-host " For optimun output, set PoweShell Width for screen buffer size to at least 110" -f yellow; write-host
write-host " Protection Group Term Goal Tape Label"
write-host " ------------------------------ ---------- --------------- --------------"
foreach ($result1 in $result)
if ($color -eq 'white') {$color = 'cyan'} else {$color = 'white'}
write-host ("{0,2}"-f $count) -foreground green -nonewline
write-host ( " - {0,-30} {1,-10} {2,15} " -f $result1.PG, $result1.STLT, $result1.RG) -nonewline -f $color
write-host $result1.TL -f yellow
$count++
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. Regards, Mike J. [MSFT] This
posting is provided "AS IS" with no warranties, and confers no rights.
I cant seem to get this script to run.. can someone point out what might be missing..
I've tried creating a shortcut like the following as well:
Target: C:\Windows\System32\WindowsPowerShell\v1.0\powershell.exe -noexit -File "C:\Program Files\Microsoft
DPM\DPM\bin\dpmcliinitscript.ps1" "C:\Data\scripts\scheduledjobs.ps1"
Start in: "C:\Program Files\Microsoft DPM\DPM\bin\"
If i run as admin in just takes you to a command line prompt in PS..
Any thoughts on what is missing here.. i've modified the ps1 to reflect 2012 in my case.. 2012 R2
DPM
Tech, the Universe, Everything: http://tech-stew.com
Ok, the 1.6 script works.. but only if i run it from the ps1 script file.. by right clicking it and doing the Run with Powershell option (non admin).. my shortcut doesnt work.. same issue.. it just goes to a power shell prompt. The right click and
run is non admin mode as well.
When I run it with the right click it shows no jobs scheduled.. If i look in dpm 2012 r2 i see a yearly tape backup scheduled for today.. the script doesnt show me a way to also get the monthly to appear (i've set the monthly for a day later but it doesnt
appear in the scheduled tasks for next 7 days).. i was under the impression this script would help force the monthly to appear/run.. but even the yearly that does show in DPM scheduled tasks isnt showing up with the script (maybe admin issue?)
Tech, the Universe, Everything: http://tech-stew.com

EOIO is not working for file- BPM- Proxy scenario.

Hi All,
I have one File to BPM (Merge pattern ) to Proxy scenario.
I have two file communication channel at the sender side and defined QOS as EOIO for both. In SXMB_MONI it assings same queue for all messages.
BPM is merging that messages. However during that it assings different queue for merged messages.
When it comes to proxy , again different queues are assingned to the messages.
Is there any way I can define QOS in BPM or at the proxy side ( I know it should be at the sender side only , but it's not working..)
Thanks & Regards,
Dijesh Tanna.

HI,
Within the current release the BPM will always only use EO (SAP Note 833740).
May be the SAP note 905049 will help you on this ...
Thanks
Swarup

Cfexchangeconnection tag not working for exchange server 2007

We are using Coldfusion 8 - 64 bit. Over week end, we migrated from Microsoft exchange 2003 to Exchange 2007. We are using cfexchangeconnection tag to get emails from exchange to our application. After recent update to exchange 2007 this tag is not working. we are getting following error
"Unable to connect to the Exchange server using HTTP/HTTPS protocol"
We have tried following :
1. the certificate checked and is ok and lacated in right directory.
2. We are using form based authentication
Any help on this will be highly appreciated.
Thanks
santy

If this is a migration to a new server I would check some things.
Firewall access rules allow port 80 and 443, for a network firewall, and if a new server windows firewall (think Win Server 2008 firewall is enabled by default).
For SSL connections, is the install certificate on the server match the server name you are connecting to in full? Maybe an old certificate or something got installed on the exchange server.
I haven't used this tag, but maybe you could try the username as [email protected], if you are just using "blah".
Byron Mann
[email protected]
[email protected]
Software Architect
hosting.com | hostmysite.com
http://www.hostmysite.com/?utm_source=bb

Bfile columns not working for files in network

Hello all,
I have made a table with a column of type bfile. When i call the function bfilename(<alias-dir>,<filename>) it works fine as long as the alias-directory is mapped to a physical drive on the machine(Windows NT) on which the database is running. But if i specify a network directory which has been mapped to a drive say "F:/" then the same is not working.
Can anyone pls tell me what the problem is? And is there a solution to the same?
Thanks
Mazhalai

This is maybe a security problem. I think the "oracle" user is not allowed to access the network files.

BMR/Systemstate backup not working on windows server 2008 error 2147942487

Hi, trying to backup system image using SCDPM 2010 RTM.Most of the server are getting healthy backups except for this one server which is giving error:
Affected area: Computer\System Protection
Occurred since: 1/27/2014 2:43:27 PM
Description: The replica of System Protection Computer\System Protection on server.DOMAIN.COM is inconsistent with the protected data source. All protection activities for data source will fail until the replica is synchronized with consistency check. You can recover data from existing recovery points, but new recovery points cannot be created until the replica is consistent.
For SharePoint farm, recovery points will continue getting created with the databases that are consistent. To backup inconsistent databases, run a consistency check on the farm. (ID 3106)
DPM cannot create a backup because Windows Server Backup (WSB) on the protected computer encountered an error (WSB Event ID: 517, WSB Error Code: 0x80070057). (ID 30229 Details: Internal error code: 0x809909FB)
More information
Recommended action: For resolution actions and more information on the WSB error, go to http://technet.microsoft.com/en-us/library/cc734488(WS.10).aspx.
Synchronize with consistency check.
Run a synchronization job with consistency check...
Resolution: To dismiss the alert, click below
Inactivate alert
On the server, event viewer show the following events:
1. Backup Log:
Backup started at '2014-01-27T11:26:21.356950100Z' failed with following error code '2147942487'.
2. Application Log:
The description for Event ID 517 from source Microsoft-Windows-Backup cannot be found. Either the component that raises this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.
If the event originated on another computer, the display information had to be saved with the event.
The following information was included with the event:
27-Jan-14 11:26:21 AM
2147942487
%%2147942487
The resource loader failed to find MUI file
However, when I observe the backup process using "wbadmin get status", it reaches 99% then stops.
Running backup of volume Local Disk(C:), copied (97%).
Running backup of volume Local Disk(C:), copied (98%).
Running backup of volume Local Disk(C:), copied (99%).
Backup stopped before completing.
Summary of backup:
Backup stopped before completing.
The parameter is incorrect.
The server hardware is HP blade with two disk which are mirrored, and has 12 GB free space. below is the output from systeminfo command:
Host Name: server
OS Name: Microsoftr Windows Serverr 2008 Enterprise
OS Version: 6.0.6002 Service Pack 2 Build 6002
OS Manufacturer: Microsoft Corporation
OS Configuration: Member Server
OS Build Type: Multiprocessor Free
Registered Owner: Admin
Registered Organization: -
Product ID: 55041-339-7818202-76771
Original Install Date: 04-Aug-08, 3:15:18 PM
System Boot Time: 21-Jan-14, 3:58:47 PM
System Manufacturer: HP
System Model: ProLiant BL460c G1
System Type: x64-based PC
Processor(s): 2 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 6 GenuineIntel ~3000 Mhz
[02]: Intel64 Family 6 Model 23 Stepping 6 GenuineIntel ~3000 Mhz
BIOS Version: HP I15, 02-May-11
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
System Locale: en-us;English (United States)
Input Locale: en-us;English (United States)
Time Zone: (GMT+03:00) Kuwait, Riyadh
Total Physical Memory: 16,381 MB
Available Physical Memory: 8,320 MB
Virtual Memory: Max Size: 21,821 MB
Virtual Memory: Available: 13,722 MB
Virtual Memory: In Use: 8,099 MB
Page File Location(s): C:\pagefile.sys
Domain: DOMAIN.COM
Logon Server: N/A
Hotfix(s): 157 Hotfix(s) Installed.
[01]: {47740627-D81D-4A45-A215-03B075A18EC7}
[02]: {3D019598-7B59-447A-80AE-815B703B84FF}
[03]: {A8E86480-A9C1-4414-8AA2-B05A485C82F0}
[04]: {C444285D-5E4F-48A4-91DD-47AAAA68E92D}
[05]: {DB33A524-845E-4855-9E90-A5619BCDD527}
[06]: {ECC3A660-90E3-4A89-9FE8-F8B3C633B12E}
[07]: {65AFCB03-3111-47E2-B1ED-198D6B0BC96E}
[08]: {F5E29D9D-519A-36C7-87E3-9A22A8180B1B}
[09]: KB971513
[10]: KB971512
[11]: 944036
[12]: 982861
[13]: KB960362
[14]: KB2079403
[15]: KB2117917
[16]: KB2141007
[17]: KB2160329
[18]: KB2183461
[19]: KB2207566
[20]: KB2286198
[21]: KB2296011
[22]: KB2296199
[23]: KB2305420
[24]: KB2345886
[25]: KB2347290
[26]: KB2387149
[27]: KB2388210
[28]: KB2416400
[29]: KB2416470
[30]: KB2419640
[31]: KB2423089
[32]: KB2436673
[33]: KB2442962
[34]: KB2443685
[35]: KB2447568
[36]: KB2467659
[37]: KB938464
[38]: KB942288
[39]: KB948609
[40]: KB948610
[41]: KB949189
[42]: KB950762
[43]: KB950974
[44]: KB951066
[45]: KB951698
[46]: KB951978
[47]: KB952004
[48]: KB952287
[49]: KB953733
[50]: KB954155
[51]: KB954459
[52]: KB955020
[53]: KB955069
[54]: KB955302
[55]: KB955430
[56]: KB955839
[57]: KB956250
[58]: KB956572
[59]: KB956744
[60]: KB956802
[61]: KB957097
[62]: KB957200
[63]: KB957321
[64]: KB957388
[65]: KB958481
[66]: KB958483
[67]: KB958623
[68]: KB958624
[69]: KB958644
[70]: KB958687
[71]: KB959130
[72]: KB959426
[73]: KB960225
[74]: KB960803
[75]: KB961371
[76]: KB961501
[77]: KB967190
[78]: KB967723
[79]: KB968389
[80]: KB968537
[81]: KB969058
[82]: KB969897
[83]: KB969897
[84]: KB969947
[85]: KB970238
[86]: KB970430
[87]: KB970653
[88]: KB971468
[89]: KB971486
[90]: KB971557
[91]: KB971657
[92]: KB971737
[93]: KB971930
[94]: KB971961
[95]: KB972036
[96]: KB972270
[97]: KB972636
[98]: KB973346
[99]: KB973507
[100]: KB973525
[101]: KB973565
[102]: KB973687
[103]: KB973917
[104]: KB974145
[105]: KB974318
[106]: KB974455
[107]: KB974470
[108]: KB974571
[109]: KB975364
[110]: KB975467
[111]: KB975517
[112]: KB975560
[113]: KB975759
[114]: KB975929
[115]: KB976098
[116]: KB976264
[117]: KB976470
[118]: KB976662
[119]: KB976749
[120]: KB976768
[121]: KB976772
[122]: KB977165
[123]: KB978251
[124]: KB978262
[125]: KB978542
[126]: KB978601
[127]: KB978886
[128]: KB979099
[129]: KB979306
[130]: KB979309
[131]: KB979482
[132]: KB979687
[133]: KB979688
[134]: KB979899
[135]: KB979910
[136]: KB980182
[137]: KB980195
[138]: KB980218
[139]: KB980232
[140]: KB980248
[141]: KB980302
[142]: KB980436
[143]: KB980842
[144]: KB981322
[145]: KB981332
[146]: KB981793
[147]: KB981852
[148]: KB982132
[149]: KB982214
[150]: KB982519
[151]: KB982664
[152]: KB982666
[153]: KB982799
[154]: KB983589
[155]: KB948465
[156]: KB960568
[157]: KB968930
Network Card(s): 1 NIC(s) Installed.
[01]: HP NC373i Multifunction Gigabit Server Adapter
Connection Name: Local Area Connection 2
DHCP Enabled: No
IP address(es)
[01]: x.x.x.x
[02]: fe80::f494:43c2:7d90:e774
Hyper-V Requirements: VM Monitor Mode Extensions: No
Virtualization Enabled In Firmware: No
Second Level Address Translation: No
Data Execution Prevention Available: No
Things I have tried:
1. I tried to backup manually to external HDD using wsb snap-in, but it has failed in the same way.
2. Stop and re-add protection.
3. I have researched the error, some results suggest that some bad sectors might exist, however, when I run the command, it forces me to schedule the command on next boot. when I reboot, it loads windows after that gives a message "Cannot open the volume
for direct access"
How to end this loop? please help. Thanks for considering my question ...

Hello Ebttikar,
Please try clean boot then test how the issue goes. Following are the detailed steps about clean boot:
Log on to the computer by using an account that has administrator rights.
Click Start, type msconfig.exe in the Start Search box, and then press ENTER to start the System Configuration Utility.
On the General tab, click Selective Startup, and then click to clear the Load startup items check box. (The Use Original Boot.ini check box is unavailable.)
On the Services tab, click to select the Hide all Microsoft services check box, and then click Disable all.
Click OK, Choose Don’t show this message again and then click Restart.
Please check if RDP session issue is still the same.
Please let me know the result.
Best regards,
Sophia Sun
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

TFS Scheduled backups not working in TFS2013 server

Hi .,
I am seeing the following error,
Could you help me..It worked earlier. And all of a sudden it is failing, once I configure the reports through Tfs Admin Console.
Please find the error details
TF401002: The SQL Server Database Engine failed to save the database backup to path \\MyShare\TfsDbBackup. Please grant SQL service account read/write access to that folder.
Regards,
venkat
Thanks & Regards P.Venkateswara Reddy

Hi
venkat,
Since we haven't heard from you for a long time, I assume the issue is resolved, I mark useful reply as answer. If you have any concerns, please feel free to reopen
it or submit a new question. Thanks for your understanding.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Bluetooth not working for file transfer between Macs

I just got a MacBook Pro, with OS 10.6.1. My desktop is the iMac 2.66Ghz Intel with 10.5.8. I cannot get Bluetooth file transfers to work between the two.
I've got file sharing turned on for both machines. I've got all the frakkin' folders I need to transfer added to the file sharing list and all are set to "read & write" permission for every user I see in the list. Both machines can discover and seemingly connect to each other in Bluetooth.
However, I cannot send files between them; the connection just times out. I turned off the firewall on both machines. I've got file-sharing allowed on both machines. But the Macbook insists on only seeing the "public" folder on my iMac, but won't accept any files from it, and vice versa. I can't see anything on my iMac (and vice versa); I can't browse, I can't send.
I don't want to use the Migration -- I don't want to transfer everything under the sun to the laptop (and why in the WORLD Migration doesn't allow one to pick & choose what you want to migrate is beyond me), just specific files. Using my regular wireless connection, it's going to take over 6 hours. I want to get Bluetooth working -- it's irritating enough that the Firewire ports between my two Macs aren't the same type, so I can't use my existing firewire cable to do it, but this issue with Bluetooth is driving me up the wall.
Any suggestions? I've tried searching this forum, but can't seem to find anything that would fit my specific problem, and all the KB docs I've found, I've followed. HELP!

HI Chris,
Sharing files using Bluetooth
To share files using Bluetooth, you first need to make sure Bluetooth is turned on, and then use Bluetooth File Exchange to send a file.
To turn on Bluetooth:
Choose Apple menu > System Preferences and click Bluetooth.
Select the On checkbox. To allow other Bluetooth enabled devices to “discover” your computer and send files, also select the Discoverable checkbox.
Select “Show Bluetooth status in the menu bar” so you can quickly send files and perform other actions using the Bluetooth status menu in the menu bar.
To send files using Bluetooth:
Choose Send File from the Bluetooth status menu in the menu bar.
If the Bluetooth menu isn’t visible, choose Apple menu > System Preferences, click Bluetooth, and select “Show Bluetooth status in the menu bar.”
In the window that appears, select the file you want to send and click Send.
Select the device you want to send the file to and click Send.
If you don’t see the device you want to send the file to, make sure the device has Bluetooth turned on and is discoverable.
You do not need File Sharing turned on for Bluetooth technology.
Another way to share files between two Macs is How to use Firewire Target Disk Mode
Carolyn

Non Clustered Indexing not working for SQL server 2005

I have create two non clustered index on two particular tables. Now the problem is its working fine..but after restarting my server its working stop and then again I have to delete that index and recreate it.

try these links
http://blog.sqlauthority.com/2009/02/07/sql-server-introduction-to-force-index-query-hints-index-hint/
http://blog.sqlauthority.com/2009/02/08/sql-server-introduction-to-force-index-query-hints-index-hint-part2/
http://www.brentozar.com/archive/2013/10/index-hints-helpful-or-harmful/
Hope it Helps!!

Why does double-click not work for files of Firefox type under Windows 7 (Firefox 15.0.1)?

If in the Windows Explorer of Windows 7 I double-click the name of a file that is mentioned as being a Firefox file by its file type symbol, it should be launched. But this doesn't happen. If I select "Open with" > Firefox" in the file's context menu, nothing happens. But if I select another browser, the file will be launched.

Hi,
You can try to right-click a file > '''Open with''' > '''Choose default program''' > '''Browse''' (disregard any existing entry) and select Firefox, and also enable (tick) '''Always use the selected program to open this kind of file'''.

Lion Server DNS service not working for locally created zones. Caching working fine.

OS Lion Server DNS service not working for local zones. Was fine under Snow leopard server but Lion server upgrade has severely broken my DNS and web sites. Zones look fine under Server Admin but keep getting "query failed (SERVFAIL) for xxxx at /SourceCache/bind9/bind9-42/bind9/bin/named/query.c:3921" in the logs. BTW - Server Admin cant seem to see the log file either.
Surely someone actually tested that DNS still worked on Lion?

I upgraded from Snow Leopard Server to Lion Server on day 01. I hit the same issue where, after the upgrade, my Lion Server stopped serving names for my private local domain.
I finally took a few minutes to figure out what was wrong. After turning on debug logging and looking through the logs, I found my particular issue, now resolved.
The issue I had was, when the domain initially was setup when I installed Snow Leopard Server, for some reason it created a zone just for the server (in my case, something like zone "s-01.mydomain.priv"), and a separate zone for all the other machines (zone "mydomain.priv", containing all the private IPs for my local domain). I never messed with it because it worked, but generally I would have put all of them in the same zone.
My zone "mydomain.priv" had a nameserver and mail exchanger entry for my server, s-01.mydomain.priv. I could see this in the Server Admin app on the DNS bubble, Zones tab, mydomain.priv selected, and the General Info panel. This was fine in Snow Leopard. This was failing the zone load in the updated bind for Lion Server, though. The issue was that the "mydomain.priv" zone was referencing the s-01.mydomain.priv server, which was not defined in the "mydomain.priv" zone but rather in the "s-01.mydomain.priv" zone.
My fix:
1. In Server Admin, add the server to the zone "mydomain.priv". I put an A record (Add Machine) in the "mydomain.priv" zone for my server named s-01.mydomain.priv.
2. shut down DNS on the OS X Lion Server (hit the Stop DNS button on Server Admin).
3. edit /etc/named.conf by hand, removing the specialized zones that contianed just the server. In this case, it would be the section titled 'zone "s-01.mydomain.priv"' and the section titled 'zone "3.10.1.10.in-addr.arpa"'. Your in-addr.arpa zone name will change based on whatever your server IP address was. My internal one happened to have s-01.mydomain.priv mapped to 10.1.10.3.
4. Once the specialized zones for just the server were removed, I started the DNS up again. Instead of serving four zones as it had in OS X Snow Leopard Server, it now servers two zones. And, now, it is resolving my local machines for the mydomain.priv zone.
YMMV. I did note that it wasn't totally necessary to do step 3, but I never really understood the need for the specialized domain, and keeping it around would have a copy of data that would just confuse things.
Hope that helps. That's been the only hiccup I've noticed updating to OS X Lion Server thus far.

PSE8 Backup/Synchronization not working for more than a month

1. Reconnecting files shows that a file is not connected; however, no file is listed. How do I find missing file's properties.
2. Backup/synchronization preferences works fine.
3. I can select one or more or the whole catalog.
4. The twirly icons show next to the album(s) for a second or show but then the synced icon remains in album/albums.
5. I click OK and after the hour glass shows a while, it finishes.
6. I click on icon and see that sychronization is on.
7. If I check (unsynced items, synced items, or items marked for sync) it shows nothing and says that none of those choices matches.
8. I have repaired and reindexed countless times (never has there been a "repair" problem.
9. I click on optimize and that works.
10. After that I notice "generating thumb nails" and the twirly thing moving. I've let it generate thumbnails for more than 24 hours and it's still going.
I have spent countles hours during day and night, and I can't get it to work.
I noticed that someone wrote that he had a similar problem that began with his using the IPAD. And I started using the IPAD also, but I couldn't sync my files with photoshop.com before that.
Customer service and Help provides me with no answers. What should I do?

Hi clairenanak:
Sorry to hear about the troubles.
On your #1, you may have disconnected files of media types that are not visible. To ensure that all media types are visible, go to View > Media Types, and check any items that are not currently checked. Then try the Reconnect.
As far as backup/sync not working, disconnected files can stop sync from working.
After resolving the disconnected files issue, let us know if sync is not working. We may need to look at the sync log to determine why.
As for the Organizer constantly generating thumbnails, this could indicated that you have many files, for example 10,000, in your catalog.
If you have many files in your catalog, then you may need to just wait for the process to finish.
It may also indicate a problem with the thumbnail cache that can't be repaired by the Optimize command.
You can manually reset this file by doing the following:
Determine the name of your Elements Organizer catalog.
The name of the catalog appears in the lower-left of the Organizer.
    Alternatively, you can open the Organizer and then click File > Catalog. The name of the catalog will show in the list at the bottom with " [current]" after it.
Close the Elements Organizer.
Navigate in Windows Explorer to the folder that contains your catalog. Here are the default locations:
   Windows 7 or Vista: C:\ProgramData\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>
Click Start, type "%ProgramData%" (including the quotation marks) into the Start Search, and then press Enter.
Open each folder in the above structure until you have opened the catalog folder.
   Windows XP: C:\Documents and Settings\All Users\Application Data\Adobe\Elements Organizer\Catalogs\<CATALOG NAME>
Choose Start > Run, type "%AllUsersProfile%\Application Data" (including the quotation marks) in the Open text box, then press Enter or click OK.
Open each folder in the above structure until you have opened the catalog folder.
   NOTE: Replace <CATALOG NAME> with the name of the catalog that you determined in Step 1 above.
There should be a file called thumb.5.cache, which is the thumbnail cache. Delete this file.
The next time you open the Elements Organizer, the thumbnail cache will begin to rebuild. This may take some time, depending on the number of files you have in the catalog.
HTH

Clob is not working for bulk data files in PL/SQL XML program

Hi Odie,
we took your help to fix the our issue before
"https://forums.oracle.com/forums/thread.jspa?threadID=2238458&tstart=105"
working fine for : program is working for smaller size data.
Issue : now we have problem with the largr size data .
getting the below error:
Arguments
P_dir_name='/tmp'
P_file_name='CCBGO.COLO_CNG.RESPONSES.20120802.00054131826'
Environment will now switch to UTF-8 code-set.
Parts of this log file may not display correctly
as a result. This is an expected behavior.
XML_REPORTS_XENVIRONMENT is :
/apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
XENVIRONMENT is set to /apps/applmgr/product/OFDEV/ofdevora/806/guicommon6/tk60/admin/Tk2Motif_UTF8.rgb
Current NLS_LANG and NLS_NUMERIC_CHARACTERS Environment Variables are :
American_America.UTF8
stat_low = 8B
stat_high = 0
emsg:was terminated by signal 11
Appreciated for your earlier support.
Kindly suggest .
Many Thanks,
Ramesh.

Thanks ALex,
your are true it is concurrent program error ,
but it is working for small amount of data and generating the output and it is not working for larger data.
i have placed the code which i have used kindly suggest where i am going wrong.
i am calling the .rdf through the concurrent program, i've used the below query in RDF
select
BATCHHEADER
,BATCHTRAILER
,RqUID
,Severity
,PmtRefId
,StatusDesc
,ErrorDesc
,AsOfDate
,AsOfTime
,RqUID1
,SPRefId
from table(CL_CXFRFXFH_PKG.rcacknowledgments(:P_dir_name,:P_file_name));
kindly find the below code for the package CL_CXFRFXFH_PKG.
==========================
CREATE OR REPLACE package body APPS.CL_CXFRFXFH_PKG is
function rcacknowledgments (p_directory in varchar2, p_filename in varchar2)
return TRecordTable pipelined
is
nb_rec number := 1;
tmp_xml clob;
tmp_file clob;
rec TRecord;
begin
dbms_lob.createtemporary(tmp_file, true);
tmp_file := dbms_xslprocessor.read2clob(p_directory, p_filename);
rec.BATCHHEADER := regexp_replace(tmp_file, '.*<BATCHHEADER>(.*)</BATCHHEADER>.*', '\1', 1, 1, 'n');
rec.BATCHTRAILER := regexp_replace(tmp_file, '.*<BATCHTRAILER>(.*)</BATCHTRAILER>.*', '\1', 1, 1, 'n');
loop
tmp_xml := regexp_substr(tmp_file, '<\?xml[^?]+\?>\s*<([^>]+)>.*?</\1>', 1, nb_rec, 'n');
exit when length(tmp_xml) = 0;
--dbms_output.put_line(tmp_rec);
nb_rec := nb_rec + 1;
select RqUID, Severity, PmtRefId, StatusDesc, ErrorDesc, AsOfDate, AsOfTime, RqUID1, SPRefId
into rec.RqUID
, rec.Severity
, rec.PmtRefId
, rec.StatusDesc
, rec.ErrorDesc
, rec.AsOfDate
, rec.AsOfTime
, rec.RqUID1
, rec.SPRefId
from xmltable(
'/CMA/BankSvcRq' passing xmltype(tmp_xml)
columns RqUID varchar2(3000) path 'RqUID'
, Severity varchar2(3000) path 'XferAddRs/Status/Severity'
, PmtRefId varchar2(3000) path 'XferAddRs/Status/PmtRefId'
, StatusDesc varchar2(3000) path 'XferAddRs/Status/StatusDesc'
, ErrorDesc varchar2(3000) path 'XferAddRs/Status/ErrorDesc'
, AsOfDate varchar2(3000) path 'XferAddRs/Status/AsOfDate'
, AsOfTime varchar2(3000) path 'XferAddRs/Status/AsOfTime'
, RqUID1 varchar2(3000) path 'XferAddRs/RqUID'
, SPRefId varchar2(3000) path 'XferAddRs/SPRefId'
pipe row ( rec );
end loop;
dbms_lob.freetemporary(tmp_file);
return;
end;
end;
============================================
Many Thanks,
Ramesh.

OOF not working for mailboxes homed on Exchange 2010 server during migration

Hi There
I'm troubleshooting an issue during a exchange 2010 to exchange 2013 migration where the OOF is not working for users homed on the exchange 2010 mailbox servers. This applies to users using outlook 2010 and outlook 2013 .OWA works perfectly and you can also
enable OOF via exchange powershell.
Users homed on the exchange 2013 servers does not have any issues.
The exchange 2010 servers is on SP3 rollup 4 and the 2013 servers on SP1 only without any rollups installed.
So my question will be - have anyone experienced this issue during migration and will patching the exchange 2010 servers to rollup 5 or 6 and the exchange 2013 to sp1 rollup 5 fix the OOF issue then? If requested the client to patch to these levels, but
in the meantime I'm checking if anyone else had similar issues.
Any pointers will be welcome.

Hi ,
1.Please check the problematic exchange 2010 user account can able to access the ews virtual directory internal url and you can check that via browser's.It will prompt for the user name and password , please provide that .
EWS url wopuld be like - https://mail.youdomain.com/EWS/Exchange.asmx
2.Then the second step would be autodiscover check for the problematic user account.you can find that via test email configuration .There you came to know whether outlook is fetching up the proper url for ews and autodiscover.
3.Then please un check the proxy settings in browsers and check the same.
4.please use the command to check the auto discover
test-outlookwebservices
Please check the below links also.
http://exchangeserverpro.com/exchange-2013-test-outlook-web-service/
http://www.proexchange.be/blogs/exchange2007/archive/2009/07/14/your-out-of-office-settings-cannot-be-displayed-because-the-server-is-currently-unavailable-try-again-later.aspx
http://port25guy.com/2013/07/20/user-cannot-set-an-out-of-office-in-exchange-20102013-or-eventid-3004-appears-in-your-event-log/
http://www.theemailadmin.com/2010/06/exchange-server-2010-out-of-office/
Regards
S.Nithyanandham
Thanks S.Nithyanandham

Backup not working for File Server

Similar Messages

Maybe you are looking for