Backup Schedule Strategy

I am working in a company's plant and i have an external hard disk to take the backup . What strategy i should aquire for backups.

Hi,
either you can configure by packages or by crontab jobs.
check this * http://www.dba-oracle.com/t_crontab_examples.htm*
or if you prefer to go by dba_scheduler_jobs then read this link
http://www.oracle-base.com/articles/10g/Scheduler10g.php
But i prefer you to go through crontab jobs always.
Thanks

Similar Messages

Auotmate Backup - Schedule Exp DMP

Hi Friends
We are using Oracle 10g Standard edition on Windows Server 2003 we need to automate the export dmp method and schedule it every day.Looking at the method posted in this forum we used a batch file with the following code
bk.bat
set DAT=%date:~-4%%date:~3,2%%date:~0,2%
exp bank/pass1@oracledb file=D:\test\full_%DAT%.dmp log=D:\test\full.log
And we schedueled it using the JOB Schedueler in Oracle using the Command Type-Program.
It's Working fine but just wanted to know if there is a better method of achieving this exp task other than than batch method.
Any Inputs Would be Appreciated
Thanking You
Park

Hi;
Please see below link which could be helpful for you:
Re: Backup Schedule Strategy
Regard
Helios

Windows Server 2008 backup schedule wizard not showing volumes

Hi folks,
We are running into issues when attempting to configure a Windows Backup schedule through either running the Backup Schedule wizard or through using the wbadmin utility. While I have previously posted this issue on a separate forum (with no luck) I’ve restructured
this description based on the responses received and am also hoping that this a more suitable forum for the problem we are experiencing.
On running the backup wizard the backup configuration screen shows the backup size to be 0KB for the Full Server option or if I choose ‘Custom’ and go to ‘select backup items’ the volume list is empty. However the later ‘select destination disk’ screen of
the wizard lists all of the disks attached to the server along with the associated volume letters (via clicking the ‘Show All Available Disks’ option).
On the backup wizard reaching the summary stage it then proceeds to format the destination disk. On completion of this format the wizard status then changes to ‘Creating backup schedule’ at which point it then fails with the message “The specified number
of volumes is invalid”.
Equally running the following wbadmin command:
wbadmin ENABLE BACKUP -addtarget:{81737a1c-0000-0000-0000-000000000000} -schedule:21:00 -include:c:
Results in the following error:
“ERROR - One of the source volumes specified cannot be included: c: Please specify source as a volume drive letter or access path (if volume is mounted in a folder). Only volumes on locally attached disks can be backed up.”
The server is a Dell PowerEdge R620 running Windows server 2008SP2 and is operating as expected other than for this windows back issue. Everything appears as normal when I view the disks within the Disk Management Console. Backups used to run on this server
fine before it was migrated from old hardware to new hardware using Doubletake Move. Everything else is running fine since the migration apart from Windows backup so not why it would only be effecting Windows backup. I have also ran the wbadmin ‘delete
catalog’ command to remove reference to the previous backups that were taken.
Is there any other tests that I can run to determine why Windows backup is having trouble seeing the available volumes at the 'Select Backup items' stage but not at the Select Destination' stage? Any help or pointers in the right direction would be very
much appreciated.
Thanks,
Niall

Hi Mandy,
Thanks for your advise and apologies for my delayed response. I've was on leave for the past two weeks and my colleague (who had been watching this post in my absence)
was nervous about deleting registry entries (:>)..
I have searched for upper and lower filter values defined under the specified 'Class' registry folder and have found there to be no values specified for either:
"Storage volume shadow copies" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{533C5B84-EC70-11D2-9505-00C04F79DEAF}
OR "Storage Volumes" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{71A27CDD-812A-11D0-BEC7-08002BE2092F}
Happy to share the other values stored under these two keys if they would be of use in helping spot the problem?
The only upperFilters value that I found within the Class registry folder that related to storage was:
"Disk drives" at HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E967-E325-11CE-BFC1-08002BE10318} which had a REG_MULTI_SZ upperFilters value of 'PartMgr'.
Do you know if this Disk drives upperFilters value is as expected and if should/can I delete it?
Also is there any other tests that I can run to determine why Windows backup is having trouble seeing the available volumes at the 'Select Backup items' stage but not at the Select Destination' stage?
Thanks,
Niall

[Forum FAQ] Cannot perform a backup schedule via Windows Server Backup and receive "The system cannot find the path specified." Error

Symptom One
You attempt to
schedule a backup every day via Windows Server Backup on Windows Server 2008 R2. At the beginning, the backup works without issue. But after a few days it failed and you receive the error “Windows Server Backup:
The system cannot find the path specified.”
Cause
The issue may occur if there is
no shadow copy storage space available on the backup volume.
Verify
You can use the List ShadowStorage command to check if you have enough storage space to store the newly created shadow copy. If you've reviewed the size of the backup snapshot and discovered
that there is no allocated space for the storage association, you need to resize shadowstorage.
Solution
You could run the command below to create shadow copy storage space on the backup volume:
vssadmin resize
shadowstorage /for=<ForVolumeSpec> /on=<OnVolumeSpec> [/maxsize=<MaxSizeSpec>]
More Information
Vssadmin resize shadowstorage
http://technet.microsoft.com/en-us/library/cc788050.aspx
Symptom Two
When you add
another external hard drive to backup schedule via Windows Server Backup on Windows Server 2012, it fails and you receive the error “The System cannot find the path specified.”
Cause
The issue is due to the
Original Destination Disk was not attached to the server.
Verify
You could check the disk status in Disk Management to see if the Original Destination Disk is offline or removed.
Solution
You need to attach
Original Destination Disk to the Server then choose another external hard drive as backup target. After that, you could remove the Original Destination Disk.
Workaround
To work around this issue, please use the WBADMIN command line tool to add disk.
WBADMIN ENABLE BACKUP -addtarget :{ DiskID}
The AddTarget parameter takes disk ID as parameter. It can be retrieved by running "WBADMIN GET DISKS" command.
Example:
WBADMIN ENABLE BACKUP
-addtarget :{ aa123d14-bba0-1dd9-0d93-80aaaa6bbb63}
More Information
Wbadmin enable backup
http://technet.microsoft.com/en-us/library/cc742130.aspx
Please click to vote if the post helps you. This can be beneficial to other community members reading the thread.

good

ISE version 1.2 patch-5 backup schedules

Hi,
I have ISE version 1.2 patch 5 and I have scheduled a backup every day @3am EST.
Now I would like to delete that backup schedule. I know how to disable the backup but I would like to delete it completely. In other words, I do not want to see it everytime I log into the WebUI Administration --> backup & restore.
Is it possible?

At this time, you can only disable the scheduled backups, you cannot delete them. I know that enhancements to the sceduled backup are scheduled for 1.2.1 and hope that this is one of them.
Please Rate Helpful posts and mark this question as answered if, in fact, this does answer your question. Otherwise, feel free to post follow-up questions.
Charles Moreton

Offline backup scheduled in DB13 failed

Hello everybody,
Whole database offline + redo log backup scheduled in DB13 failed. We are running SAP on Oracle 10.2.0.2 on HP UX B.11.23
Here is the portion of log mentioning the error.
BR0202I Saving /oracle/TU4/sapbackup/.tape.hdr0
BR0203I to /dev/rmt/10mn ...
BR0209I Volume in device /dev/rmt/10mn has name TU4B05
BR0202I Saving init_ora
BR0203I to /dev/rmt/10mn ...
BR0202I Saving /oracle/TU4/102_64/dbs/initTU4.sap
BR0203I to /dev/rmt/10mn ...
BR0280I BRBACKUP time stamp: 2009-02-03 03.00.58
BR0198I Profiles saved successfully
BR0280I BRBACKUP time stamp: 2009-02-03 03.00.58
BR0307I Shutting down database instance TU4 ...
BR0278E Command output of '/oracle/TU4/102_64/bin/sqlplus /nolog < /oracle/TU4/sapbackup/.bdzvnffe.spi':
SQL*Plus: Release 10.2.0.2.0 - Production on Tue Feb 3 03:00:58 2009
Copyright (c) 1982, 2005, Oracle. All Rights Reserved.
SQL> Connected.
SQL>
SQL> ORA-01013: user requested cancel of current operation
SQL> Disconnected from Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production
With the Partitioning and Data Mining options
BR0280I BRBACKUP time stamp: 2009-02-03 04.01.04
BR0279E Return code from '/oracle/TU4/102_64/bin/sqlplus /nolog < /oracle/TU4/sapbackup/.bdzvnffe.spi': 0
BR0302E SQLPLUS call for database instance TU4 failed
BR0309E Shutdown of database instance TU4 failed
BR0056I End of database backup: bdzvnffe.aft 2009-02-03 04.01.04
BR0280I BRBACKUP time stamp: 2009-02-03 04.01.05
BR0054I BRBACKUP terminated with errors
Any input will be highly appreciated.
Regards
Santanu

Hi
Are u taking the offline backup on disk or tape. Your log seems to be mentioning it to be on tape. Anyways, have you set the /oracle/SID/102_64/dbs/initSID.sap file parameters accordingly. Also the log says that there has been a user intervention to stop the backup. Did you press Cntrl C in the process. Offline backups to tape is a bit tricky aand even we are fighting on this. I would suggest taking it on disk and then transferring it to tape.
Lokesh

Backup scheduled through DB13 not working

Hello,
We are trying to schedule backup through DB13.But it got failed due to below error.Backup scheduled through DB13 was working fine last week.
Job started
Step 001 started (program RSDBAJOB, variant &0000000000174, user ID KHJS199)
Execute logical command BRARCHIVE On host ppd-ora-ga2
Parameters:-u / -jid LOG__20100927040000 -c force -p initGA2.sap -sd
External communication error at program start (see system log)
SAPXPG_START_XPG_LONG: sy-subrc ne 0
destination = SAPXPG_DBDEST_PPD-ORA-GA2
SXPG_STEP_XPG_START: execute_sapxpg: rc = 1.003
SXPG_STEP_COMMAND_START: SXPG_STEP_XPG_START returned: 1.003
SXPG_COMMAND_EXECUTE(LONG)
<timestamp> = 20101014040033
COMMANDNAME = BRARCHIVE
ADDITIONAL_PARAMETERS =
-u / -jid LOG__20100927040000 -c force -p initGA2.
sap -sd
LONG_PARAMS
OPERATINGSYSTEM = ANYOS
TARGETSYSTEM = ppd-ora-ga2
DESTINATION = SAPXPG_DBDEST_PPD-ORA-GA2
SY-SUBRC = 1003
SXPG_COMMAND_EXECUTE failed for BRARCHIVE - Reason: program_start_error: For More Information, See SYS
Job cancelled after system exception ERROR_MESSAGE
We checked the RFC connection SAPXPG_DBDEST_PPD-ORA-GA2 and it is not working.
For target host and gateway host,we have maintained their corresponding virtual host.
Gateway is already installed on the server.
Could you please help me out on this.
Thanks,
Gopi L

Hello,
Just to add some more information.
We have 3 servers, X(Database + CI),Y(Dialog instance),Z(Dialog Instance).
Server X is the primary node and Y is the failover node.
Gateway is already installed on Database server and I can verify it by giving ps -aef | grep gwrd.
Thanks,
Gopi L

Whole database offline + redo log backup Scheduling failed

Hi Experts,
         In DB13 I have the following Issue, Whole database offline + redo log backup Scheduling failed.
How to solve this.

Hi,
        Below is the Log details,
BR0120I Control files
File                                                Size   Id.      Device Link    Type
/oracle/PRD/origlogA/cntrl/cntlrPRD.dbf         13975552    0      5578783 NOLINK FILE
/oracle/PRD/origlogB/cntrl/cntrlPRD.dbf         13975552    0      5578784 NOLINK FILE
/oracle/PRD/sapdata1/cntrl/cntrlPRD.dbf         13975552    0      5578772 NOLINK FILE
BR0616I Tablespaces in table TSORA for SAP owner SAPSR3:
PSAPSR3, PSAPSR3700, PSAPSR3USR
BR0227E Not enough disk space in /test123/PRDBK for backup, missing at least 149478.274 MB
BR0056I End of database backup: behzgxph.afd 2012-02-28 03.05.40
BR0280I BRBACKUP time stamp: 2012-02-28 03.05.40
BR0054I BRBACKUP terminated with errors
BR0280I BRBACKUP time stamp: 2012-02-28 03.05.40
BR0291I BRARCHIVE will be started with options '-U -jid ALGOF20110129030500 -d disk -c force -p initPRD.sap -sd'
BR0280I BRBACKUP time stamp: 2012-02-28 03.06.09
BR0292I Execution of BRARCHIVE finished with return code 0

Can TM backup schedule be altered?

While hourly backups seem like a good idea they aren't always necessary! I notice that TM made backups during the night last night when both I and the Mac were asleep! If no files were changed then why were backups made?
Seems to me that if there are no changes thee is no need for a backup.
Does anyone know if there is a way to adjust TM settings? Perhaps instead of hourly change it to every 2 or 3 or 4 hours? So much intense disk access seems to me not such a good idea.
Also at what times does TM make it's daily and weekly backups?

1) Hourly backups are occurring in the middle of the night when none need to be made. Your suggestion to stop it while it's occurring is ludicrous.
As the dude stated above. Simply disconnect the external, shut down Mac, turn off TM or if unwanted backup occurs when you are on stop it. What's wrong with that?
2) If there isn't much work being done for a period of time why do the backups occur anyway? I see backups at 1:30 AM, 2:30 AM, 3: 30 AM, etc. Essentially these are all the same. Unless my dogs are surfing for dog ** while I sleep no files were being altered.
You are a little rude and writing "dog **" on AD makes one think you are a silly troll
3) The question is simple and don't tell me to unplug the drive! The questions are...
Does anyone know if there is a way to alter the backup schedule to say every two or three hours?
Or not back up at all when the Mac is sleeping?
Turn off Time Machine or shut down Mac are other ways to go, in addition to the previous helpful advice from your fellow AD users.

Backup Schedule

Hello Gang, I have a database running around 14 gigs. What type of schedule would be best suited for the size. Because administration is on the east coast. Servers reside In the midwest and Users are On both the East & West Coast what CA. Any Suggestions would appreciated.

Hi dude!
You can also check SAP notes 1297986 and 1420452 and the referred ones.
As a very very short summary, take into account that transaction DB02 is recommended for the backup scheduling. And specially take into account that whatever the way you run backups, if you want to be able to perform a point-in-time recovery, you need what is called an "online backup"; to be clear, in order to provide a point-in-time recovery you need:
a) to set the SID database in "FULL recovery model"
b) to execute a full database backup regularly (recommended: daily)
c) to execute transaction log backup regularly (recommended: hourly or every 15min, but this depends on your system activity and maximum allowable data loss)
Point c) is crucial for point-in-time recovery. The chain of transaction log (TL) backups must not have any "gaps",otherwise you will not be able to reach the desirable point in time (check note 434645).
Cheers!!
-Jesú

Backup Schedule failing on weekdays.

Our backup schedule runs every day at 1:30AM. The weekend backups complete successfully, but the backups during the weekdays fail with a shadow copy error.
The only difference is that during the weekdays more users are connected, but still during the weekends users are connected, but not as many.
The error is pretty generic: The backup of the volume failed. A volume shadow copy service failed.

Hi,
Please provide detailed information about the issue and run "vssadmin list writers" and paste output in the forum for further investigation.
You could refer to the articles to troubleshoot the issue:
"Volume Shadow copy operation failed for backup volumes..."
http://social.technet.microsoft.com/Forums/en-US/dbd2a8f6-c4fb-4412-969e-7b0ce940cd2d/volume-shadow-copy-operation-failed-for-backup-volumes?forum=windowsbackup
Failed Full System Backup Error: 2155348129
http://social.technet.microsoft.com/Forums/windowsserver/en-US/7eaba8d9-2fc8-41fd-a2ef-18a8d8b9186e/failed-full-system-backup-error-2155348129?forum=windowsbackup
Regards,
Mandy
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Windows Server Backup scheduled task run successfully but backup do not start (not running) on Windows Server 2012

Hi,
A backup job has been setup on Windows Server 2012 (Platform: Win32NT; ServicePack: ; Version: 6.2.9200.0; VersionString : Microsoft Windows NT 6.2.9200.0) via Windows Backup Software UI (Local Backup 1.0).
It is appearing as a scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup" belonging to user 'nt authority\system' in task scheduler.
The problem is that the Backup job never start despite the scheduled task running and completing successfully (when run automatically or manually)!
Would you be able to explain why and assist in resolving that issue?
Here is what we know:
When the backup is run manually via the Windows Backup Software UI, it works fine.
When the backup is run via command line (as set in schedule task) in a cmd command prompt (as local/domain 'administrator' or as 'nt authority\system' which is possible by running command prompt via 'PsExec.exe -i -s cmd'), something like "%windir%\System32\wbadmin.exe
start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet", it works fine.
If you manually run the preset scheduled task while logged in as administrator, the task run and complete successfully but the backup job does not start.
Idem if you schedule task is run automatically at scheduled time.
The schedule task run and complete successfully but the backup job does not start.
It is confirmed by running the following in a command prompt as 'nt authority\system':
schtasks /run /tn "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup"
SUCCESS: Attempted to run the scheduled task "\Microsoft\Windows\Backup\Microsoft-Windows-WindowsBackup".
Despite success result, the Backup job does not start running...
No errors or warning appears anywhere in Event Logs (Microsoft > Windows > Backup or Task Scheduler) nor in the scheduled task History tab. The schedule task complete successfully but no Backup job is run...
If scheduled task automatically set by Windows Backup software is duplicated (copied) and set manually it runs fine as 'administrator' and as 'nt authority\system' (subject that 'nt authority\system' is added to the 'Backup Operators' AD group).
Here is an export of the current pre-set schedule task, is there any settings that need to be changed to make it works?
<?xml version="1.0" encoding="UTF-16"?>
<Task version="1.4" xmlns="http://schemas.microsoft.com/windows/2004/02/mit/task">
<RegistrationInfo>
    <Author>MYDOMAIN\SERVER1</Author>
    <SecurityDescriptor>D:AR(A;OICI;GA;;;BA)(A;OICI;GR;;;BO)</SecurityDescriptor>
</RegistrationInfo>
<Triggers>
    <CalendarTrigger id="Trigger 1">
      <StartBoundary>2014-07-14T21:00:00</StartBoundary>
      <Enabled>true</Enabled>
      <ScheduleByDay>
        <DaysInterval>1</DaysInterval>
      </ScheduleByDay>
    </CalendarTrigger>
</Triggers>
<Principals>
    <Principal id="Author">
      <UserId>S-1-5-18</UserId>
      <RunLevel>HighestAvailable</RunLevel>
    </Principal>
</Principals>
<Settings>
    <MultipleInstancesPolicy>Parallel</MultipleInstancesPolicy>
    <DisallowStartIfOnBatteries>true</DisallowStartIfOnBatteries>
    <StopIfGoingOnBatteries>false</StopIfGoingOnBatteries>
    <AllowHardTerminate>true</AllowHardTerminate>
    <StartWhenAvailable>true</StartWhenAvailable>
    <RunOnlyIfNetworkAvailable>false</RunOnlyIfNetworkAvailable>
    <IdleSettings>
      <StopOnIdleEnd>false</StopOnIdleEnd>
      <RestartOnIdle>false</RestartOnIdle>
    </IdleSettings>
    <AllowStartOnDemand>true</AllowStartOnDemand>
    <Enabled>true</Enabled>
    <Hidden>false</Hidden>
    <RunOnlyIfIdle>false</RunOnlyIfIdle>
    <DisallowStartOnRemoteAppSession>false</DisallowStartOnRemoteAppSession>
    <UseUnifiedSchedulingEngine>false</UseUnifiedSchedulingEngine>
    <WakeToRun>false</WakeToRun>
    <ExecutionTimeLimit>P3D</ExecutionTimeLimit>
    <Priority>7</Priority>
</Settings>
<Actions Context="Author">
    <Exec>
      <Command>%windir%\System32\wbadmin.exe</Command>
      <Arguments>start backup -templateId:{f11eb3aa-74e7-4ff4-a57b-d8d567ee3f77} -quiet</Arguments>
    </Exec>
</Actions>
</Task>
Thank you in advance for your feedback.

Once again, the issue is not to run the backup manually from the command line but to have it run via the scheduled task setup by the Windows Backup software.
By default, the schedule task is to be run as NT Authority\System, and when run under this account, the backup does not start (even though account is member of Backup Operators) and job can manually be run via elevated command prompt. This is not a normal
behavior and constitute a major bug in Windows Server 2012.
From my understanding the NT Authority\System account is a built-in account from Windows that should by default be part of the Administrators group (built-in) even though it does not explicitly appears like it in AD by default.
This account shall have by default Administrators rights and Backup Operators rights (via the Administrators group) without being explicitly added to those groups (http://msdn.microsoft.com/en-gb/library/windows/desktop/ms684190%28v=vs.85%29.aspx). By design
it is supposed to be the most powerful account which has unrestricted access to all local system resources. If that is not the case (as it seems) then this would constitute a major bug in Windows Server 2012 edition.
As said previously and as you confirmed, currently by default NT Authority\System on Windows 2012 server cannot start backup manually via an elevated command prompt unless it is manually added to Backup Operators (or Administrators) group. But wouldn't that
constitute a bug of Windows Server 2012?
Our server has not yet been restarted since I added NT Authority\System account to the Administrators group explicitly manually so I cannot yet confirmed it would sort the issue. Indeed it is heavily in use so cannot easily be restarted. Will confirm when
done.
We also have an additional problem where after a while of last reboot, part of the Exchange ECP can no longer be properly loaded in the web browser due to compilation error (compilation is done via NT Authority\System account which seems to no longer have
sufficient right to compile .NET code). What is strange is that it works at first and then stop working at some point... I am hopeful that adding NT Authority\System to the Administrators group would sort this issue as well but once again, that shall not be
needed!!!
Could a Windows Server 2012 update introduced some security policy changes or else that prevent NT Authority\System to have full power?

SBO Backup schedule problem

Hi,
When i try to schedule de SBO Backup in the SAP Service Manager to "daily" and click oke, then it always switches back to "on specific date"
What is my problem?
Greetings
Mark

Hi Mark,
Thanks for the details, we were checking all the fixes included in version 2007A in regard the backup services and not similiar issue had been reported.
The change in the backup frequency could be related to a third party application as Anti-virus a/o spyware reseting the system values to the previous one.
As already commented in this thread, it will be advisable to reinstall the server tools or make the proper changes to allow you antivirus to take the change.
If still facing the issue after applying previous recommendations, please generate and forward a message to Business One support including all the details from your test and observations.
Regards,
Juan Manuel Marrero
SAP Business One Forums Team

What Third Party Software to Modify Time Machine Backup Schedule?

Hello -
I was hoping to get some suggestions to what third party tool to use that will allow me to change the timing of backups from the regular hour intervals. As far as I know that cannot be changed in Time Machine and am looking for suggestions of software that will allow me to modify the schedule.
Thanks in advance...

Katie 'OConnell wrote:
This may be so, but Time Machine DOES say that it will continue backing up files until the hard disk is FULL. That could be a problem if one doesn't have a massive HD that can be dedicated exclusively to this activity, nor tons of money to purchase extra HDs so that Time Machine can back up to its heart's content.
Frankly, I don't need hourly backups and would prefer to eliminate those altogether.
The hourly backups don't really add much space, since they're only kept for a day, but they do protect you better. If you back up less frequently, you can lose more when (not if) your internal HD fails, or something else awful happens to your Mac.
And there's a much better chance of recovering a previous version of a file that you change or delete in error (ever do "Save" instead of "Save As"?), or that somehow gets corrupted.
As noted on the Time Machine Preference window, after 24 hours, it keeps one backup per day (the first) for a month, then one per week as long as there's enough space. After that, it automatically deletes the oldest backup(s) to make room for new ones.
It varies widely, of course, depending on how you use your Mac, but Time Machine usually needs 2-3 times the space of the data it's backing-up to keep several months, or more, of backups.
By the way, if you're mixing other data with your backups, in the same partition, that's going to be a problem sooner or later, but it's easily avoided by partitioning it. See #3 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
Message was edited by: Pondini

Can I use DB13C for central backup scheduling of MaxDB and Oracle databases

Hello,
we have installed Solution Manager 7.0 on Windows with MaxDB. We want to use DB13C to schedule and Monitor our database backups. We have 8 systems with Oracle Database and 7 systems with MaxDB database, 1 DB2 and 1 MS-SQL Server . Due to QAS issues we can´t migrate to one database system. Is there a possibility to handle all database systems from our Solution Manager ?
Thank you
Heiko

You can use DBACOCKPIT for that purpose. Import the systems from the SLD.
Markus

Backup Schedule Strategy

Similar Messages

Maybe you are looking for