Bad quality of photos when transferring to PC

I have problem, when i take picture its clear and good resolution, but when i transfer picture to my computer photo is blury and its looks like bad quality. Do i need to fix something on my computer or something else?
Thanks.

Hi MilosBozinovic,
What happens to the photos if you try use Media Go to transfer the content?
Media Go 
 - Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Similar Messages

  • Why would I want to change JPEG quality of photos when exporting them from iPhoto?

    Why would I want to change JPEG quality of photos when exporting them from iPhoto?  Changing the quality of the print changes the size of the saved file and thus impacts the speed at which it is moved on the internet.  But other than size of the file, what is the advantage of changing the quality?

    I have no idea why you would want to do anything
    Some people want lower quality to reduce file size for different reasons
    It is an option - if you do pot want to do that do not use that option
    LN

  • Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

    Am I the only one getting bad quality youtube videos when running on LTE? When I'm on wifi they seem fine but I switch to lte it looks bad on the youtube app and on safari.

    I've never had any problems with mine ever. The only freeze I've had was from a file I recorded on tivo, cut commericals out in movie maker and then re-encoded to the lowest possible bit rate that that zens nati've resolution supports. Try turning your sensitivity in the touch pad down. Sometimes if you have it up to high you may have a chance of doing that (although I have only had slow response, instead of a freeze by doing that).
    You also have to compare to all of the other products out there: Ipod and Zune are a lot worse with pathetic little problems (annoyances). I didn't pay for tech support?

  • Loss of quality of photos when I import

    Hi all, I'm wondering 1) why my photos suddenly look so bad when I import them from iPhoto to iMovie. I haven't had this problem before. And 2) I've noticed that when I import a photo, suddenly my trash increases by 117 KB and if I view the trash, I see a copy of the picture there. What is going on?
    I searched previous posts and tried resizing the photo in Photoshop before importing it, but nothing changed.
    I'd appreciate any ideas or advice you have!

    Finally got an answer from Apple about this. Technical Support have just been able to re-create the problem, and have admitted there is a fault. Have been told to wait for an update.
    Hope this helps.
    T

  • Loss of quality of photos when importing from iphoto to imovie

    A question... When I import high resolution photos from iphoto and look at the preview on imovie HD, the quality is the same great quality that I can see on iphoto. Once I import the photo clip onto imovie, however, the quality is very poor on the imovie playback. This drop in quality is regardless of whether Ken Burns effect is used or not.
    I already checked the quality on imovie preferences and it is already selected as the highest quality (default setting)
    Any clues as to why the photo image quality should drop to such a poor image when importing a photo from iphoto to imovie?

    Hi L
    There are a great difference on photos shown on a Mac with eg. iPhoto or
    PhotoShop and what's going to video.
    a. Different resolution. Just the number of lines as the selected type of project
    eg: PAL 4x3 = 625 lines ≈ same in pixles (But square not elongated or visa versa)
    b. iMovie "Viewer" is just an approximation. I connected my miniDV Camera
    to FW and analog to a TV. Select in pref - Play back via Camera. Now I see
    the final quality on my TV. Usally much better.
    Yours Bengt W

  • HT201317 issues seeing all photos when transfering from iphone5 to pc/mac

    I'm having issues transferring photos from my iphone5 to pc/mac. I have over 200 photos on my phone however when I go to transfer only the last 20 or so photos are visible to transfer. why is this the case? it was working ok before now I cannot access all my photos from the computer. please help!

    Whenever you plug in your iPhone to your Mac with iPhoto installed, iPhoto will automatically open up a screen giving you the option to download the photos in your iPhone...At least that's how it's set up in my computer. But I believe that's for photos taken by the iPhone.
    Besides what said above, there is a iPhone Transfer Column which includes the tutorial about How to transfer photo/pictures from iPhone to Mac.
    Hope it can do you a favor.
    I may receive some form of compensation, financial or otherwise, from my recommendation or link.
    <Edited by Host>

  • Why does iphoto not copy all photos when transfering

    Hi peeps.
    why does iPhoto not copy all photos from an event when im copy/pasting to an external folder on my mac(for later transfer). All softwares are up to date and ive only just realised it happens, but when i copy all pics in an event then paste in a folder, the pic count is substantially different. for example i select all pictures in an event called 'new1', the count of files is 188. i then copy/ paste to a folder,  select all files and check 'info' and it says 141 files??? 
    all i can see painstakingly going through to compare which images are in each place is that the ones that arent in my new folder , seem to be the ones ive edited in iPhoto??  conincidence? or am I missing something fundamental here?  Ive only just realised this is occuring. The trouble is, after moving images to folders/hard drives I  subsequently delete them from iphoto to keep my macbook airs HDD with some space.  So basically all of the versions of pictures I want, i.e, the new edited and adjusted versions are no longer! NOT HANDY!
      help please.

    We've seen a few reports of this in the past while and no one is sure of the cause.
    Use the File -> Export command. See this User Tip
    https://discussions.apple.com/docs/DOC-4921
    for details of the options the Export Dialogue offers.
    If you're interested in your Photos then this workflow
    The trouble is, after moving images to folders/hard drives I  subsequently delete them from iphoto to keep my macbook airs HDD with some space.
    means you are losing quality, metadata and the version of control. If you don't want these why use iPhoto at all?
    You could just move the whole Library to an external:
    Make sure the drive is formatted Mac OS Extended (Journaled)
    1. Quit iPhoto
    2. Copy the iPhoto Library from your Pictures Folder to the External Disk.
    3. Hold down the option (or alt) key while launching iPhoto. From the resulting menu select 'Choose Library' and navigate to the new location. From that point on this will be the default location of your library.
    4. Test the library and when you're sure all is well, trash the one on your internal HD to free up space.
    Regards
    TD

  • Bad Quality in photos sync from Aperture

    I have just bought a shiny new imac with Aperture Installed and I've found a problem when syncing projects in Aperture with my iPhone.
    What happens is that about a third of all photos I sync appear blurred and pixalated on the iphone even though they are crisp and clear in Aperture. I've tried the unsync and resync 'cure' with no success.
    One curious thing though, if I export the project from Aperture into a folder on my hard drive and then sync directly from that ALL of the photos are crisp and clear even the ones which were originally blurred.
    As I said this is a new imac and I've never used Aperture before so I wondered if there was something I might be doing wrong or some setting I may have missed, because it seems that the problem is something to do with Aperture but I'm at a loss on how to cure it.

    Thank you that solved the problem. I had a feeling it was going to be something I'd missed in the settings but I never would have guessed that it was to do with preview sizes. I'd always assumed it was the master copies that were sync'd.
    So thank you one again

  • Quality of photo when creating a photo book from iphoto

    i am in the process of creating a photo book however i am downloading pictures from facebook and i am not sure if the qulaity will be good enough for print, will i be told during this process as i havent been yet and dont want to pay for something that isnt right. thanks

    There is another potential issue. While you may have enough pixels, the plain fact is that not all pixels are the same. When a photo is uploaded to Facebook they 'process' it - and in the course of that throw away about 90% of the data in the file. What that means is that a lot of the character and depth of the photo may be lost when printed. Unfortunately, this is not something that iPhoto can warn you about.
    Regards
    TD

  • Duplication of photos when transferring to laptop

    Can someone explain please why when we transfer photos onto laptop they duplicate, I can't find a subject anywhere in the manual- I'm sure it must be there somewhere.
    Thanks

    I can't speak to iPhoto, never used it.
    Are the files identical, or is one perhaps a RAW and the other a JPG?  If they really are just copies of each other there must be some setting in iPhoto that is doing it, because it's not normal to duplicate files upon transfer.  There might be some option that allows for making backup files and it just happens to put the backup files in the same folder.
    Just something to consider:  if you're using SD cards and your laptop has a card reader, I recommend using the card reader over USB connection.  I find it much easier to manage.  So much so that I'd even recommend using a card reader for CF.

  • How do I stop iTunes from compressing audio/photos when transferred to IOS device? (iPad

    Hello,
         I have noticed that 13GB of photo's only equals around 3GB on the iPad and iPhone. I noticed the same thing with audio. Although, I do not notice the compression with video.
         My question is, how do I stop it from compressing photo's if I want to? I understand it saves space, but what if I wanted to email the full size photo to someone. This also may defeat the purpose of some editing programs. I would like to know how to do the same with audio.
         It does not affect the original files in anyway, correct? Also, I using the manual drag and drop option for Movies and audio. I sync with the photos.

    With syncing photos you can't change how they are synced, iTunes will 'optimise' them when copying them over to the device - and no, the original photos on your computer are not affected, iTunes creates separate 'optimised' versions of the photos on your computer and copies those over.
    If you want the original versions of the photos on your iPad then (and if there were only a few that you wanted full-scale) you could email them to yourself and use 'open in' in the Mail app to copy them to the Photos app, or use the camera connection kit with your iPad to copy them via an SD card to it - photos copied via the kit are copied full resolution, they aren't changed.
    Or there are third-party photo management apps such as Photo Manager Pro which can copy photos to/from your computer via the 'file sharing' section on the device's Apps tab in iTunes, they will be copied as-is - that app can also copy photos to/from it and the Photos app.
    For your music, on the device's Summary tab when connected to your computer's iTunes, under the Options heading have you currently got the 'convert higher bit rate songs to ...' set ?

  • Bad quality of pictures when imovie editing on Ipad 2

    I tried to make a video editing with imovie on ipad with pictures only from my ipad 2.
    I've a real pb with the quality : pictures are very good quality when seen on the ipad, but become blurred or fuzzy when seen with imovie editing.
    Why ?? Is it possible to change this quality??!
    thanks!

    tollirom wrote:
    I tried to make a video editing with imovie on ipad with pictures only from my ipad 2.
    I've a real pb with the quality : pictures are very good quality when seen on the ipad, but become blurred or fuzzy when seen with imovie editing.
    Why ?? Is it possible to change this quality??!
    thanks!
    May I ask, was the pictures taken on a iPad or a camera?
    If iPad the front facing camera is about 0.3 or 0.4 megapixels and the back camera is about 0.7 megapixels
    Did I answer your question?
    Or maybe  remove "Ken Burns" as an effect to rid of blur or pixellation.

  • W/Jpeg will some quality be lost when transferring files

    Moving files with share option between accts. Will photo's loose any quality?

    How are you moving them? iPhoto Library Manager? exporting and importing? ???
    LN

  • Bad quality preview in Bridge versus photoshop preview

    Okay here's my problem.  When I view my photos using Bridge CS4 I get a bad quality preview even when preview is set to "Always High Quality" The first photo you will see that there is a greenish yellowish tinge on the side of my daughters cheek.  However, when I open the same image in photoshop that tinge is gone! You can see this in the second image.  Is there a setting that I need to alter here in Bridge? And here's a weird thing....since that file is a raw cr2 file, when I open it up in camera raw, I see the exact same greenish tinge in camera raw as well.  Does anybody know what's going on here?

    Gosh darnit!  It's happening again.  I'm getting that murky yellowy tinge in the shadows again in the preview panel in Bridge AND Photoshop!! I downloaded the CS5 trial and when I was previewing some .CR2 RAW and jpeg files in sRGB color space in Bridge CS5, I see that in the preview box, the image looks awful with that yellowy tinge in the shadows.  I open it up in Photoshop CS5 and zoom way into it, and sure enough, I see that yellowy nightmare.  But when I open it up in picture viewer or in internet explorer, the yellowy tinge is gone.  Man this is frustrating!  I know it can't be a monitor calibration issue cuz if that was the case, the image in picture viewer would indeed, also have the yellowy tinge, correct?  Any ideas?  When the problem mysteriously went away with CS4 when I originally posted this thread several months ago, I thought updating Bridge was the solution.  However, I don't believe that was the real answer.  Anybody got any ideas?  I was curious if it was an "Adobe" issue so I opened up one of the jpeg problem photos in AE CS5 and zoomed in.  Fortunately, the yellowy tinge does NOT show up in the preview panel.  PLEASE HELP!!!
    Dell XPS 430
    Windows 7 64 bit
    Nvidia GT 240
    Dual monitors (Dell 2209WA IPS panels)  

  • +++ Photos imported from iPhoto to imovie6 become bad quality.

    Although imovie 6 is caught up with a sum of disadvantages of imovie
    5, I observe a new disadvantage which did not exist before.
    With knowknowing:
    In the "multi-media" mitre + "photographs", when I import
    a photograph from iphoto, I observe that the image which is transcribed
    in the screen of the visual display of imovie 6 is of a perfect
    quality.
    For example, a photograph taken with 3,5 Méga pixels with a
    weight of 2 Mo. PRECISION : !!!!!! ( FORMAT IS JPEG ) !!!!!
    The image is perfect, and in the internal adjustments
    with imovie 6 that they are with or without the effect Ken Burns,
    it seems the original.
    However when I decide to apply it in the
    timeline and that I it replay in the visual display, I note that the
    quality of the image was strongly degraded ( very bad quality).
    There are somebody in the specialists or the helpers who can give me explanations and how to cure that,
    because this disadvantage is strongly regrettable and detrimental for me.
    Thanks to you.
    powerbook G4, 17", 1,5 G   Mac OS X (10.4.6)  

    Hi pierre - here are some more useful references:
    Still Photo Quality in iMovie:
    http://www.sjoki.uta.fi/~shmhav/SVCDon_aMacintosh.html#slideshow
    http://discussions.apple.com/thread.jspa?messageID=961100&#961100
    http://discussions.apple.com/thread.jspa?messageID=971053&#971053
    http://discussions.apple.com/thread.jspa?messageID=961093&#961093
    and maybe especially:
    http://discussions.apple.com/thread.jspa?threadID=245638&tstart=0
    http://discussions.info.apple.com/webx?[email protected]@.68be025d/13
    and from Karl Petersen – to create Best Quality Still Pic for iMovie:
    http://discussions.apple.com/thread.jspa?messageID=1921544#1921544
    The main point to keep in mind is that before importing your photos, you must have the Ken Burns effect turned on in order to achieve the best quality. Also, remember that the iMovie screen is just there for editing purposes, and does not display the clips at full quality.

Maybe you are looking for

  • When saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?

    when saving a file in [.jpg] format, i am asked to choose a quality from 1 to 100. what changes in the file created based on the quality parameter chosen?. i would like to know what changes, so in the future i can set my camera to a setting that will

  • Is it possible to replace Preview v5.5 (Lion) with Preview v5.0 (Snow Leopard)?

    I am finding certain 'improvements' in Preview v5.5 quite irritating and pointless ('save a version', not asking to save a file, basically stuff that was well implemented in v5.0). If it ain't broke, don't frickin fix it, Apple! What's the point of t

  • Not able to install .xpi file in firefox

    I have created my first addon and it is working fine in dynamic mode (pointer in profiles folder to development folder). Then I created the .xpi file by compressing entire content as .zip and replacing it with .xpi. I tried to installed this. Firefox

  • New Resource Object Status

    Hello all, a. When you disable a user on OIM it disables all resources which are Provisioned or Enabled for that user b. When you enable a user on OIM it enables all resources which are Disabled My client would like to put in a new status for the Res

  • Wscompile failed

    Hi, I'm new to WebServices and I'm trying to build one using NetBeans 4.1. First I got the error "com.sun.xml.rpc.tools.ant.Wscompile cannot be found" by running the project. To solve this error I went to <Tools->Options->Ant settings> and added some