BADI FILTER_F4_ADHOC_AGENT does not start
Hello,
I have the following problem. I want to manipulate the search result when adding a new approver.
The Problem is that the method FILTER_F4_ADHOC_AGENTS build in with BADI does not start. My breakpoint in there is useless.
On the other hand the method CHECK_INPUT_ADHOC_AGENT runs well. My breakpoints stop in there.
Now my questions: Where is the call of the method FILTER_F4_ADHOC_AGENTS? And why does not my breakpoint stop there?
Thanks for any answers.
Edited by: Rico Scharm on Apr 7, 2010 8:17 PM
I solved the problem by debugging the search help i found after hours.
The problem is, I maintained a filter to BUS2121 as usual for the other workflow badis. But when the search help is looking for badis it got no object type. After realizing this I left the badi implementation without any filter. Now it my implementation is triggered.
Similar Messages
-
I typically just close my computer when I'm done with it, instead of putting it to sleep or logging off. Recently, when I open it back up, it does not start right away. I have to press the power button half a dozen times before it starts. HELP!!
annie1977-
Greetings and welcome.
Try booting from the system install CD/DVD by putting the disk in the drive and starting up while holding down the c key.
After boot-up find the Disk Utility, either on the desktop or under the Apple menu. Select your startup drive and the repair permissions on that drive. See if that helps.
Luck-
-DaddyPaycheck -
Enterprise Manager Console does not start on Win 2000 Pro
I have installed Oracle 9i Release 2 Enterprise Manager on Win 2000 Professional. But the Enterprise Manager console does not start. Also the EM Configuration Assistant does not start.
I have installed many times, but it is never successfull.
I was installing Enterprise Edition -> General Purpose database.
Tried the following from command prompt:
oemapp.bat I get this message : "Usage: oemapp <application_name>"
oemapp consoleI get : "bad command or file name"
oemapp console oem.loginmode=standaloneI get : "bad command or file name"
Is there any post installation configurations that need to be done?
When I read thru the oemapp.bat, "Usage: oemapp <application_name>" was under the jreSetup module.
Under C:\Program Files\Oracle\jre I have the folders with following Names(versions) 1.1.8 and 1.3.1.
In the environment variable also I have C:\Program Files\Oracle\jre\1.1.8\bin and C:\Program Files\Oracle\jre\1.3.1\bin
Could some one help me with this.
Thanks,
ArunaMarcus,
Is your machine connected to a Novell network? If so, edit the oemapp.bat file and change every reference of Windows_NT to WINNT. The issue is Novell does not set the Windows_NT variable, and uses the WINNT variable instead.
Jim -
PE 9 does not start on Windows 7 Ultimate 32 bit
No matter how I try to start PE 9, it does not start.
From Welcome Screen -> New Project: nothing happens. Form Elements Organizer -> File - New - Premiere Elements Video project it takes some time loading all modules, libraries and sorts of things until an error message appears saying that PE 9 does not function anymore.
That's all, no error log or something like this. Please let me know what info is needed.
PS: Why does my cursor jump to the beginning when I press enter in text editor here?Trying to use only ONE Hard Drive for Video Editing
You are a music conductor, with a baton that you use to point to various parts of the orchestra... this is like Windows pointing to various
parts of the hard drive to do Windows housekeeping or to load program segments for various functions
Now, at the same time and with the same hand... while still using the baton to conduct the orchestra... pick up a bow and play a fiddle...
this would be doing something with your video file at the same time as all the other work
You as a person cannot do both at the same time with the same hand
A computer is a LITTLE better, in that it can switch from one kind of task to another very quickly... but not quickly enough for EASY video
editing
You need AT LEAST two hard drives (separate drives, never a partition http://forums.adobe.com/thread/650708?tstart=0 for more) with Windows
(or Mac OS) and software on your boot drive, and video files on a 2nd drive so the boot drive is not slowed down by trying to do everything
I find that the three drives I use work very well for me, for editing AVCHD video... some people use a 4th drive, so video INPUT files are on
drive three and all OUTPUT files are on drive four... I only bought a mid-tower case instead of a full tower case (my bad... but had to fit in
the space available on my office desk!) so I use the three drives that will fit
Depending on your exact hardware (motherboard brand & model AND USB2 enclosure brand & model AND external hard drive brand & model) AND the
type of video file, you may... or may NOT... be able to use an external USB2 hard drive for SD (Standard Definition) video editing
Steve Grisetti in the Premiere Elements forum http://forums.adobe.com/thread/856208?tstart=0 and Jim Simon in the Premiere Pro forum
http://forums.adobe.com/thread/856433?tstart=0 use USB externals for editing
A USB3 hard drive connected to a motherboard with USB3 is supposed to be fast enough for video editing (I don't have such, so don't know) but
eSata DOES have a fast enough data transfer for video editing... I have not used this eSata Dock... for reference only, YMMV and all the usual
disclaimers
http://www.amazon.com/Thermaltake-BlacX-eSATA-Docking-Station/dp/B001A4HAFS/ref=cm_cmu_pg_ t -
Xfce4-power-manager does not start, but after relogin - works
Hi all.
When I login after system start, xfce4-power-manager does not start and systemtray icon doesn't appear. But after relogin (not restart), the systemtray icon of xfce4-power-manager appears and power manager itself works correctly (if I don't relogin, notebook will shutdown after 10 minutes of downtime - that rule doesn't exist in xfce4-power-manager settings).
Diff between two logs (before relogin and after, xfce4-power-manager --debug command)
diff log_1 log_2
35c35,36
< TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 0
> TRACE[xfpm-battery.c:150] xfpm_battery_refresh_visible(): visible=TRUE: ((XfpmShowIcon) SHOW_ICON_WHEN_BATTERY_PRESENT)
> TRACE[xfpm-battery.c:286] xfpm_battery_refresh_icon(): Battery state 4
51d51
< TRACE[xfpm-polkit.c:238] xfpm_polkit_free_data(): Destroying Polkit data
System
Linux gready 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014 x86_64 GNU/Linux
systemd 212-3
xfce4-power-manager 1.2.0-6
That bug start happening after one of last week updates. I don't have a package cache.
Can anyone help me?
p.s. sorry for a bad English.Yes, i'm actually running xfce4 (all other things from xfce4 group are installed).
It starts from a login manager named LightDM.
AcpiD installed as a dependency.
logind.conf
# This file is part of systemd.
# systemd is free software; you can redistribute it and/or modify it
# under the terms of the GNU Lesser General Public License as published by
# the Free Software Foundation; either version 2.1 of the License, or
# (at your option) any later version.
# See logind.conf(5) for details
[Login]
#NAutoVTs=6
#ReserveVT=6
#KillUserProcesses=no
#KillOnlyUsers=
#KillExcludeUsers=root
#InhibitDelayMaxSec=5
HandlePowerKey=ignore
HandleSuspendKey=ignore
HandleHibernateKey=ignore
HandleLidSwitch=ignore
#PowerKeyIgnoreInhibited=no
#SuspendKeyIgnoreInhibited=no
#HibernateKeyIgnoreInhibited=no
#LidSwitchIgnoreInhibited=yes
#IdleAction=ignore
#IdleActionSec=30min
I turned off key handlers because I truly HATE when I press power button and a notebook doing shutdown after that.
Last edited by theperfectblance (2014-04-17 06:57:32) -
Hello,
i tried to change the RAM on my Mac mini 2011 up to 8 GB RAM.
After installing the modules the mini does not start, led blinking and tut......tut....tut.
changhing back to the old modules, same problem.
Who can haelp? THANKSHello,
The following table lists the new tones and their meaning:
Tone(s) Description
1 tone, a 5-second pause, repeat No RAM installed
3 successive tones, a 5-second pause, 3 successive tones RAM does not pass data integrity check
1 long tone when holding down the power button Firmware upgrade in process. See About firmware updates for Intel-based Macs for more details.
3 long tones, 3 short tones, 3 long tones Firmware restoration from CD in process. See About the Firmware Restoration CD (Intel-based Macs) for more details.
http://support.apple.com/kb/HT2538
Try reseating the RAM, or try the old RAM, the new one(s) may be bad or not Mac compatible. -
My Intel Mac does not start.
My Intel Mac does not start. When I turn it on I hear a loud beep (a sound I never heard before) and then I see the spinning wheel and nothing else. I tried to start from the installation disc, I also try to reset the SMC and the PRAM. Nothing worked. I replaced the RAM cards too. It is a IMac 24"/2 Intel. Model number A1200 2006.
When I turn it on I hear a loud beep
Beeps are an indication the RAM (memory) is failing or has failed.
Power On Self-Test Beep Definition - Part 2
If you feel confident doing this, you can purchase RAM online. Crucial comes highly recommended. You can use their scanner > Memory upgrades from Crucial.com - Crucial Mac System Scanner
And uninstall the bad RAM, then reinstall new > iMac: How to remove or install memory
Or, take your Mac to an Apple Store.
The beep sound is not permissions related.
Message was edited by: CS -
GoldenGate Manager Does not start - Windows 7 64-bit, 11gR1 database
Hi Experts,
I ran into very tricky situation and seeking for clarification and if possible solution for the same, here how it goes: (This is a practice setup for my knowledge and not production)
My environement:
GGSCI (msheth-work) 18> versions
Operating System:
Version 6.1 (Build 7601: Service Pack 1)
Database:
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
I have two database installed called gg1, gg2 on the same local system.
I have two goldengate installation at following location: C:\gg1 , C:\gg2
I was successfully able to start Manager, Extract and Replicate process with out creating windows services for manager.
I read in discussion forum that it is recommneded to have different manager name and create services for them if you have multiple Goldengate installation in the same system. (Oracle Golden Gate installation
Now when I create services using INSTALL ADDSERVICE ADDEVENTS, manager process does not start and manager report log and event viewer from windows shows following error despite of providing correct login details in manager parameter file:
2012-08-23 10:42:31 ERROR OGG-00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI Error beginning session (status = 1017-ORA-01017: invalid username/password; logon denied).
GGSCI (hostname) 19> DBLOGIN USERID ggs_owner, PASSWORD ggs_owner
Successfully logged into database.
Manager Parameter File:
PORT 7810
USERID ggs_owner, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg2\dirdat\ex, USECHECKPOINTS
Your explaination and help will be highly appreciated.
Regards,
Mitul Sheth
Edited by: 954634 on Aug 23, 2012 11:46 AMThanks all of you to responding to my post, although I have bad news that I tried everything but it did not work. let me show you what all I have done:
1) Adding windows services for manager
GGSCI (msheth-work) 4> edit params ./globals
MGRSERVNAME MGR1
GGSCI (msheth-work) 5> exit
c:\gg1>install addservice addevents
Oracle GoldenGate messages installed successfully.
Service 'MGR1' created.
Install program terminated normally.
When I try to start manager service either from GGSCI or from services.msc it gives same login error as mentioned earlier in the post.
2) Using tnsnames while login into database:
GGSCI (msheth-work) 1> edit params mgr
PORT 7809
USERID ggs_owner@gg1, PASSWORD ggs_owner
PURGEOLDEXTRACTS C:\gg1\dirdat\ex, USECHECKPOINTS
Just to make sure username and password is fine I login into database using GGSCI command prompt as follows:
GGSCI (msheth-work) 4> dblogin userid ggs_owner@gg1, password ggs_owner
Successfully logged into database.
Hence, after making sure on all your suggestion I could not get it started and still situation is the same. I would need manager login into database becuase I have implemented DDL replication.
Also, just by removing manager service from windows, same configuration without any change works like a charm. It just that for evey goldengate process a new window is create and it can't be closed. (If closed process dies). -
i am using Duke 64 bit. 50% of the times firefox just does not start. i had the same problem in 2.0.0.3 and now it is 2.0.0.4 but problem is not solved. when i use command "firefox" in X Terminal, cursor just goes to the next line without doing anything and when i do "ps -x" i can see firefox was *already* running but i do not see any windows of firefox. STRANGE.......this is from my terminal:
[arnuld@arch ~]$ ps -x
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
PID TTY STAT TIME COMMAND
6042 tty2 S 0:00 -bash
6050 tty2 S+ 0:00 /bin/sh /usr/bin/startx
6066 tty2 S+ 0:00 xinit /home/arnuld/.xinitrc -- -auth /home
6073 tty2 S 0:00 wmaker
6074 tty2 S 0:00 wmaker --for-real
6699 ? Ss 0:00 /bin/sh /opt/mozilla/bin/firefox
6703 ? S 0:00 /bin/sh /opt/mozilla/lib/firefox-2.0.0.4/r
6708 ? Sl 0:00 /opt/mozilla/lib/firefox-2.0.0.4/firefox-b
6714 ? S 0:00 /usr/lib/GConf/gconfd-2 12
6728 ? Ss 0:00 urxvt
6729 pts/0 Ss 0:00 -bash
6733 pts/0 R+ 0:00 ps -x
see, firefox is already running but i do not see any firefox window in my Windowmaker. i have also tried "wmii" and "larswm".
[arnuld@arch ~]$ firefox
[arnuld@arch ~]$ firefox
[arnuld@arch ~]$ firefox
[arnuld@arch ~]$ firefox
NOTICE: it does not do anything here :-(
[arnuld@arch ~]$ ps -x
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
PID TTY STAT TIME COMMAND
6042 tty2 S 0:00 -bash
6050 tty2 S+ 0:00 /bin/sh /usr/bin/startx
6066 tty2 S+ 0:00 xinit /home/arnuld/.xinitrc -- -auth /home/arnuld/.serverauth.6050
6073 tty2 S 0:00 wmaker
6074 tty2 S 0:00 wmaker --for-real
6699 ? Ss 0:00 /bin/sh /opt/mozilla/bin/firefox
6703 ? S 0:00 /bin/sh /opt/mozilla/lib/firefox-2.0.0.4/run-mozilla.sh /opt/mozilla/lib/firefox-2.0.0.4/
6708 ? Sl 0:02 /opt/mozilla/lib/firefox-2.0.0.4/firefox-bin
6714 ? S 0:00 /usr/lib/GConf/gconfd-2 12
6728 ? Ss 0:00 urxvt
6729 pts/0 Ss 0:00 -bash
6746 ? Ss 0:00 emacs
6795 pts/0 R+ 0:00 ps -x
[arnuld@arch ~]$
i have to use "kill -9 PID" to kill all those 3 firefox-processes. this happens with me everyday when i try to access firefox. any solution ?ourcach wrote:
My firefox does not start.
when i run it it asks if i wawnt to start a new session and when i click on any of the choices it hangs and nothing happens.
even in safe mode when it is supposed to start it stil hangs and no window is oppened...
this happened when i updated to firefox 2.0.0.4...
Make sure firefox is actually stopped (check "ps axww" output for it). Kill it if it's still running somewhere.
Check your firefox profile area for files named "lock" and ".parentlock". Delete them if you find any. -
Hi, my netbook S10 suddenly went black screen, I force shut down and try to on it but it does not start up anymore .. All the lights in the netbook does not lit up to show it is running or charging.
I have tried removing the battery, power adapter, pressing the start up button for 30 seconds, but the whole machine looks dead still, no lights lit up at all... Can anyone help? Thanks ...hi Coollove,
If you're getting No Power / No Display even if you still have enough juice on the battery to power up the PC then your motherboard maybe bad and you need to contact lenovo for service.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
My miro does not start any longer.
There was both a gnome and a gstreamer update recently. Starting Miro from the terminal gives me just
2012-10-31 21:55:56,118 INFO root: Starting up Miro
2012-10-31 21:55:56,119 INFO root: Version: 5.0.4
2012-10-31 21:55:56,120 INFO root: Revision: git://github.com/pculture/miro.git - 278c58ea
2012-10-31 21:55:56,121 INFO root: Builder: nobody@eric
2012-10-31 21:55:56,122 INFO root: Build Time: 1350351159.34
2012-10-31 21:55:56,122 INFO root: Debugmode: False
2012-10-31 21:55:56,123 INFO root: Reading HTTP Password list
2012-10-31 21:55:56,124 INFO root: Starting libCURL thread
2012-10-31 21:55:56,126 INFO root: Starting event loop thread
2012-10-31 21:55:56,129 INFO root: Installing deleted file checker...
2012-10-31 21:55:56,132 INFO root: Restoring database...
2012-10-31 21:55:56,132 INFO root: Loading core extensions in /usr/share/miro/resources/extensions
2012-10-31 21:55:56,133 INFO root: Sqlite3 version: 3.7.14.1
2012-10-31 21:55:56,135 INFO root: Pysqlite version: 2.6.0
2012-10-31 21:55:56,140 INFO root: Loading user extensions in /home/valneq/.miro/extensions
2012-10-31 21:55:56,203 INFO root: opening database /home/valneq/.miro/sqlitedb
2012-10-31 21:55:56,221 INFO root: Linux version: Linux 3.6.4-1-ARCH i686
2012-10-31 21:55:56,221 INFO root: Python version: 2.7.3 (default, Apr 24 2012, 00:06:13)
[GCC 4.7.0 20120414 (prerelease)]
2012-10-31 21:55:56,222 INFO root: Gtk+ version: (2, 24, 13)
2012-10-31 21:55:56,222 INFO root: PyGObject version: (2, 28, 6)
2012-10-31 21:55:56,222 INFO root: PyGtk version: (2, 24, 0)
2012-10-31 21:55:56,223 INFO root: Language: [('LANG', 'de_DE.utf8')]
2012-10-31 21:55:56,279 INFO root: libtorrent: 0.16.5.0
2012-10-31 21:55:56,283 INFO root: pycurl: libcurl/7.28.0 OpenSSL/1.0.1c zlib/1.2.7 libssh2/1.4.2
** Message: pygobject_register_sinkfunc is deprecated (GstObject)
/usr/lib/python2.7/site-packages/gst-0.10/gst/__init__.py:193: Warning: cannot register existing type `GstObject'
from _gst import *
/usr/lib/python2.7/site-packages/gst-0.10/gst/__init__.py:193: Warning: g_once_init_leave: assertion `result != 0' failed
from _gst import *
/usr/lib/python2.7/site-packages/gst-0.10/gst/__init__.py:193: Warning: g_type_register_static: assertion `parent_type > 0' failed
from _gst import *
/usr/lib/python2.7/site-packages/gst-0.10/gst/__init__.py:193: Warning: interface type `GstImplementsInterface' or prerequisite type `<invalid>' invalid
from _gst import *
Any ideas, what actually broke?Same problem here! After updating gstreamer and Gnome (to 3.6.1) Miro responds with the same output on the terminal...........
I tried uninstalling and reinstalling gstreamer0.10-bad and gstreamer0.10-bad-plugins, but still the same output. -
N8 - battery probably empty - does not start
Hello.
My N8 battery probably got empty during the night cause in the morning I found it switched off. I started to charge it but the phone does not start anymore. The little light blinks for a while and afterwards stops. I charged it for 2 hours and still it does nothing if I press switch on button. The screen is blank, no indication that it is in the charger.
Thank you for any advises.If you've tried all the suggestions already made and still nothing, you'll find the problem is in the phone itself... I had a similar problem a little while back and took it to Nokia Service Centre for them to have a look and it turned out the phone was faulty and they replaced it for me... Too bad I hadn't made a back-up and lost everything... Good luck
-
I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life. I tried command-option-power. Still dead.
SheilaArl wrote:
I just returned from air travel with my macbook pro. It does not start up. Completely black, no sound, no life. I tried command-option-power. Still dead.
I have a 2007 Macbook, so it's probably a lot older than your Macbook Pro, but it sounds like what happened to me, except that mine hadn't travelled anywhere. I pulled out the ram and blew out some dust, popped them back in, and wha-la! it turned back on and worked better than ever! Or otherwise you've got a dud/old/warped/fried battery, which is also what happened to my laptop - it got so bad it did what your laptop is doing. Ordered a new battery online and all good since then. Or otherwise, like the previous post asked, 'is it plugged in?' -
WebAnalysis does not start after workspace is set on Windows Authentication
I've used [doc Hyperion System 9.3.x Configuring the BI+ Workspace for Single Sign-On (SSO) with Internet Information Services (IIS) [ID 1100096.1] to configure SSO for workspace users. It works fine. Though since then the WA service does not start anymore. The error message which is raised sounds very very familar but still I am not able to tackle it. The message in the log or the analysis console is "[WARN] [STANDBY] ExecuteThread: '1' for queue: 'weblogic.kernel.Default (self-tuning)' com.hyperion.analyzer.utils.general.HYAUtil - Wait for workspace [
[WARN] Timer-2 com.hyperion.analyzer.utils.general.HYAUtil - ."
I am very sure it had something to do with rights/ permissions, but also after playing around with IIS and ntfs permissions for hours I can't get SSO en WA both working at the same time.
As soon as I set my workspace aplication in IIS on windows integrated, the SSO is working but as soon as a I restart the WA service it fails to start. When I set the workspace application IIS on anonymous the WA service start fine but then the SSO is not working anymore.
It drives me crazy.
Hopefully its a small matter for you to solve!
Thanks in advance.Dont know exactly whats happened but I presume something went wrong during the update procedure.
If you will be not able to start the notebook in the safe mode or to boot the notebook then user the Toshiba recovery CD to gets the notebook working! -
I am experiencing problem (the installation does not start) when I try to install ArchiCAD 17 Educational on my mac. I am using Yosemite. How can I fix it?
You need to contact the developer/manufacturer directly to determine if their product is compatible w/Yosemite. It is not listed on their system requirement website:
Mac OS X 10.9 Mavericks
Mac OS X 10.8 Mountain Lion
Mac OS X 10.7 Lion
Mac OS X 10.6 Snow Leopard*
Note: ArchiCAD 17 is the last version of ArchiCAD to support Mac OS X 10.6
Only case insensitive file-system volumes are supported.
http://www.graphisoft.com/support/system_requirements/archicad17.html
Maybe you are looking for
-
Extract an image which is only on opening screen
A while back I chose an image of my cat to use on the opening screen of my iPhone. The cat is now dying and I would love to use that image in a multimedia program. But I no longer have the original image. Is there somewhere that the image is stored,
-
When trying to log onto Firefox to access the website, a message comes up stating 'Firefox is already running, but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system'. Having not located
-
Unable to access Oracle Enterprise Manager in Oracle 10g AS Machine
Hi All, We are working on oracle forms 10g in 3 tier architecture. I have installed oracle 10g Infrastructure (OraHome_1) followed by oracle 10g Application server (middle-tier,OraHome_2). I have copied all the forms to OraHome_2\forms folder and com
-
Discoverer 4i - Time Series Data type support
Does Discoverer 4i support time-series data type i.e. the ability to store an entire string of numbers representing for example daily or weekly data points? Thanks & Regards, Deepti
-
Disadvantage of PreparedStatement
I dont see how a sequence can be used with prepared statement... If I want to set pstmt.setInt(1,sequence.nextval) ?? This cant be done without creating another query to check the nextval of the sequence... In a normal Statement I can do this.... INS