BADI Impl Called in which TCode

Hi,
In the system we have a badi implementation. I would like to know in which TCode the badi implementation is called and executed, without executing any transactions. Is there any table or function module to find that out?
Thanks in advance.
Peter

Hi Peter,
I think there is no way to figure out the transaction code that is responsible for the BAdI implementation.
In fact there are BAdIs that may be triggered by more than one tcode, BAdIs that are filter-dependent depending on the scenario.
You may want to read the documentation of the BAdI in se19 so that you'll have an idea when it is being used, if there's any.
Usually, you need to know first the requirement, then look for the BAdI that suits your requirement (using SPRO).

Similar Messages

FI_TAX_BADI_010 badi impl not called..

Hi,
I have implemented the BADI FI_TAX_BADI_010 and put a break point in the class code. But it is not invoked when I run F.12. I debugged upto the point where the class name is determined but I can see only the standard class there and not my BADI implementing class.
what can be wrong ?
BADI Impl and class are active.
Any suggestions ? Is it something different for F.12 (RFUMSV00) ??
thnks

ok,
I solved my problem

Badi or User-Exit for TCode-oawd

Hi All,
Please help me out with a BADI or EXIT for the Tcode - OAWD (Store Documents) .As per our requirement, while executing OAWD, after the step - work item created, we want to add a pop-up which will take us to tcode- SBWP.
Any help will be highly appreciated .
Thanks/Regards
Priya

Hi
Follow the below steps to find out what all BADI's are called when you press any button in any transaction.
1) Goto se24 (Display class cl_exithandler)
2) Double click on the method GET_INSTANCE.
3) Put a break point at Line no.25 (CASE sy-subrc).
Now
4) Execute SAP standard transaction
5) Press the required button for which you need to write an exit logic, the execution will stop at the break point.
6) Check the values of variable 'exit_name', it will give you the BADI name called at that time.
7) This way you will find all the BADIs called on click of any button in any transaction.
This will solve your BADI finding problem in future as well !!
Mark if helpful
Regs,
Tushar Mundlik

Where is BADI CRMXIF_PARTNER_MAP called during BP replication via XIF?

Hi,
I want to debug my implementation of BADI CRMXIF_PARTNER_MAP which is used in BP replication via XIF adapter. After I set a breakpointer in my program, I tried in Tcode BP to save an updated BP, it didn't goto debugging mode. I can ensure that I have done correct configuration for XIF adapter because I found the generated IDoc by using Tcode BD87. And I also try to send generated IDoc out, it also not goto to debugging mode.
So where is this BADI called? In which function or class?
Thanks a lot!
Edited by: lonny Zheng on Jun 10, 2011 1:49 PM

Hi konanki63,
I tried to set external breakpoint in coding, but it didn't work. I tried to use where-used list to find, I can only find that this BADI is called in FM CRMXIF_PARTNER_MAPSEND. But I can't find any other program call that FM again.
Could you give me more tips?
Thanks a lot!

Bad Pool Caller - Blue Screen of Death

Windows Blue Screens of Death (BSoDs) happen whenever your computer encounters something it doesn’t know how to process, so it shuts itself down to prevent any damage. Sometimes BSoDs happen once and you don’t see them again when you restart — however, this isnt always the case and a BSoD may show up repeatedly.
In this article we will look at issues causing a bad_pool_caller BSoD. What has happened is that a thread in the laptop's processor has made a bad pool request. This means that it’s asking to use resources that are unavailable, nonexistent, or in use by another thread. It could also mean that the pool header is corrupted — regardless of the particular error, it, like most BSoDs, is caused by driver issues.
Drivers are what makes your computer work. Every device connected to your computer, and nearly every component inside it has a software driver that determines how Windows interacts with your device. When driver issues are encountered- which is fairly common on new operating systems like Windows 8 — it can cause a lot of problems, but, fortunately, sometimes there is an easy fix.
Recently Connected and Installed Device
Try to determine which device was last connected or installed before an error appeared. Often this can be a new peripheral device. Go to Device Manager (in the Control Panel) and find the driver for the recently connected peripheral device driver. From there, you can get Windows to search for updates, you can disable it, or you can uninstall it entirely. You can also disconnect the problem device and perform a system restore to before the device was connected and supporting software was installed.
Recently Installed Program
If your drivers aren’t the problem, a recently installed program may be the issue. If you can determine what program you installed that started this, uninstall it or perform a system restore to before the program was installed, and, after a restart, you should be good to go.
System Restore
Windows 7 and earlier
Windows 8
Any further issues that cannot be resolved may require your computer to be repaired.

Every time we try to connect his Nano it causes the PC to crash with this Bad Pool Caller message.
is the BADPOOLCALLER citing a specific file, Laurita? if so, what is it called? (exact spelling please.)
if it's not citing a specific file, let's try getting a minidump to the Apple engineers for a look.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
Find that file and send it as an attachment to this email address.
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

Calling a custom tcode using abap class from workflow

Hi Experts,
I have a requirement of calling a custom tcode from my workflow.
For this i have created a class zcl_test ( has if_workflow ) .
I created a method ztest which will call the tcode.
CALL TRANSACTION 'ZTX'. ( My tcode just has 1 input field, for testing purpose )
Then i created a task in whichi hv used this abap class and method.
But the tcode does not run when i execute the workflow.
Please help.
Thank You,
Radhika Vadher.

Radhika Vadher
use the sample code to get the data from the task container into the ABAP class
DATA :
         w_ref        TYPE REF TO      if_swf_run_wim_internal,
         w_ref_cnt TYPE REF TO      if_wapi_workitem_context,
          w_wi_ref   TYPE REF TO      if_swf_ifs_parameter_container.
TRY.
    CALL METHOD cl_swf_run_wim_factory=>find_by_wiid
      EXPORTING
        im_wiid     = w_wiid
      RECEIVING
        re_instance = w_ref.
CATCH cx_swf_run_wim_enq_failed .
CATCH cx_swf_run_wim_read_failed .
CATCH cx_swf_run_wim .
ENDTRY.
CALL METHOD w_ref->get_workitem_context
RECEIVING
    re_ctx = w_ref_cnt.
CALL METHOD w_ref_cnt->get_wi_container
RECEIVING
    re_container = w_wi_ref.
and the w_wi_ref is having a method GET use that method to get the values of the task container into the ABAP class.

BADI or Exit for MFBF Tcode

Hi Experts,
I need to do difference calculation in posting date and document date. I have made the code but not able to find exact BADI or exit for MFBF tcode.
BADI i searched - RM_BFLUSH_GOODSMVT
EXIT ???
Please suggest, where I have to put below code so that when user put dates into this, then it will not allow him to get more than 7 days.
data: d_days like po347-scrdd,
     budat like mkpf-budat,
     bldat like mkpf-bldat.
budat = rm61b-budat.
bldat = rm61b-bldat.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
    I_DATUM_BIS                   = budat
    I_DATUM_VON                   = bldat
   I_STGMETH                     = '2'
IMPORTING
   E_TAGE                        = d_days
if d_days > 7 .
message 'date exceeds' type 'E'.
elseif d_days < 0.
message 'document date should be greater than posting date' type 'I'.
endif.
Please suggest experts,
Thanks.
Deepanshu

Hi,
Include - LBARMFS1
FORM - FORM get_hr_data .
Create a implicit enhancement in the beginning of above mentioned form FORM get_hr_data and put below code inside that.
FORM get_hr_data.
ENHANCEMENT 1 ZTEST_TEST.
data: d_days like po347-scrdd,
     budat like mkpf-budat,
     bldat like mkpf-bldat.
budat = rm61b-budat.
bldat = rm61b-bldat.
CALL FUNCTION 'DAYS_BETWEEN_TWO_DATES'
EXPORTING
    I_DATUM_BIS                   = budat
    I_DATUM_VON                   = bldat
   I_STGMETH                     = '2'
IMPORTING
   E_TAGE                        = d_days
if d_days > 7 .
message 'date exceeds' type 'E'.
elseif d_days < 0.
message 'document date should be greater than posting date' type 'I'.
endif.
ENDENHANCEMENT.
BR,
Vijay

Determine where badi is called from : webshop, GUI or webUI

Hi Experts,
I am working on BADI com_partner_badi.
I want to determine where this badi is being called from, ie, either from webshop, GUI or webUI in the ABAP debugger.
Which parameter of the badi should i check , which will provide me with the calling application ?
Thanks,
Shantanu.
Edited by: shantanu sardal on Mar 18, 2009 10:15 AM

Hi Shantanu,
Here is the explanation: The purpose of BADI is to enhance the functionality as per the customer needs. SAP has given the envelope in which you can write your own logic to change the SAP's standard behavior. Now the question that from where it gets triggered ?? It is not dependent on the GUI or Web UI etc , It can be triggered from any where as long as the component's code is getting triggered.
For example You create a BP from GUI or from WebUI does not matters as underneath API's remains the same and if you have a BADI implementation for the BP it will get triggered irrespective of the GUI or UI.
Hope this will clear your doubt.
Thanks,
Vikash.

Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error

So after freshly installing Win 8.1 I was happy, untill I started to play some games that I previously played on Win 7, I've started to get a whole heap of errors, I did have more written down but have lost the bit of paper they were written on.
Here are the list of errors I can remember.
Memory Management, Crit Structure Corrupt, Bad Pool Caller, ntfs file system error
Specs:
Operating System
Windows 8.1 Pro 64-bit
CPU
AMD Athlon II X2 250
35 °C
Regor 45nm Technology
RAM
6.00GB Dual-Channel DDR2 @ 400MHz (5-5-5-18)
Motherboard
ASUSTeK Computer INC. M3N-H/HDMI (Socket AM2 )
40 °C
Graphics
SyncMaster (1440x900@60Hz)
SAMSUNG (1440x900@60Hz)
ATI Radeon HD 4800 Series (Microsoft Corporation - WDDM v1.1) (Sapphire/PCPartner)
Storage
698GB Western Digital WDC WD7500AAKS-00RBA0 ATA Device (SATA)

Adam
These are Related to
atikmdag.sys ATI Radeon Kernel Mode Driver. Yours is 2+ years old. I would update to the newest driver available.
Microsoft (R) Windows Debugger Version 6.3.9600.16384 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\Users\Ken\Desktop\A040614-65203-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: SRV*H:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is:
Windows 8 Kernel Version 9600 MP (2 procs) Free x64
Product: WinNt, suite: TerminalServer SingleUserTS
Built by: 9600.16384.amd64fre.winblue_rtm.130821-1623
Machine Name:
Kernel base = 0xfffff803`be013000 PsLoadedModuleList = 0xfffff803`be2da9b0
Debug session time: Mon Apr 7 00:35:03.785 2014 (UTC - 4:00)
System Uptime: 0 days 0:08:48.334
Loading Kernel Symbols
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 3B, {c0000005, fffff80001cf7d73, ffffd0002305c470, 0}
*** WARNING: Unable to verify timestamp for atikmdag.sys
*** ERROR: Module load completed but symbols could not be loaded for atikmdag.sys
Probably caused by : atikmdag.sys ( atikmdag+70d73 )
Followup: MachineOwner
0: kd> !analyze -v
* Bugcheck Analysis *
SYSTEM_SERVICE_EXCEPTION (3b)
An exception happened while executing a system service routine.
Arguments:
Arg1: 00000000c0000005, Exception code that caused the bugcheck
Arg2: fffff80001cf7d73, Address of the instruction which caused the bugcheck
Arg3: ffffd0002305c470, Address of the context record for the exception that caused the bugcheck
Arg4: 0000000000000000, zero.
Debugging Details:
EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at 0x%08lx referenced memory at 0x%08lx. The memory could not be %s.
FAULTING_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
CONTEXT: ffffd0002305c470 -- (.cxr 0xffffd0002305c470;r)
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Last set context:
rax=0000000000000000 rbx=ffffcf80021783a0 rcx=ffffcf8002334ff5
rdx=0000307ffdccb010 rsi=ffffcf8004734470 rdi=ffffcf80021783a0
rip=fffff80001cf7d73 rsp=ffffd0002305cea8 rbp=ffffd0002305cf00
r8=0000000000000006 r9=0000000000000000 r10=0000000000000384
r11=ffffcf8002334ff0 r12=0000000000000001 r13=ffffcf8004734470
r14=0000000000000000 r15=ffffcf8004734470
iopl=0 nv up ei ng nz na po nc
cs=0010 ss=0018 ds=002b es=002b fs=0053 gs=002b efl=00010286
atikmdag+0x70d73:
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx] ds:002b:00000000`00000005=??
Resetting default scope
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP
BUGCHECK_STR: 0x3B
PROCESS_NAME: csrss.exe
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
LAST_CONTROL_TRANSFER: from fffff800025cf3d7 to fffff80001cf7d73
STACK_TEXT:
ffffd000`2305cea8 fffff800`025cf3d7 : ffffcf80`04734470 ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 : atikmdag+0x70d73
ffffd000`2305ceb0 ffffcf80`04734470 : ffffcf80`04734470 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 : atikmdag+0x9483d7
ffffd000`2305ceb8 ffffcf80`04734470 : 00000000`00000000 ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 : 0xffffcf80`04734470
ffffd000`2305cec0 00000000`00000000 : ffffcf80`01f52450 ffffd000`2305cf00 fffff800`025f48d3 ffffcf80`04734470 : 0xffffcf80`04734470
FOLLOWUP_IP:
atikmdag+70d73
fffff800`01cf7d73 8a040a mov al,byte ptr [rdx+rcx]
SYMBOL_STACK_INDEX: 0
SYMBOL_NAME: atikmdag+70d73
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: atikmdag
IMAGE_NAME: atikmdag.sys
DEBUG_FLR_IMAGE_TIMESTAMP: 4fdf9bbd
STACK_COMMAND: .cxr 0xffffd0002305c470 ; kb
FAILURE_BUCKET_ID: 0x3B_VRF_atikmdag+70d73
BUCKET_ID: 0x3B_VRF_atikmdag+70d73
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:0x3b_vrf_atikmdag+70d73
FAILURE_ID_HASH: {1ec4cdaf-008d-03dd-4ca9-ade1993441da}
Followup: MachineOwner
Wanikiya and Dyami--Team Zigzag

Please help me Solve Bad Pool Caller Error (Windows 8)

I'm repeatedly getting "Bad Pool Caller Error" on my Windows 8 PC causing it restart again and again. Tried all I knew, nothing worked. However, I'm able to use the PC in Safe Mode (right now I'm on it). Here is the link to dump files (zipped),
-https://onedrive.live.com/?cid=574E051B8481CE34&id=574E051B8481CE34%21231
Thank you in advance,
Anup Mehra

AM
For starters you need to update to win 8.1 ASAP and you need to either remove or update your PGP (Related to PGPsdk.sys PGP Software Development Kit NT Driver from PGP Corporation.) which is dated 2005 and can not possibly work in win 8.
Then please run driver verifier to find the under lying issue
These crashes were related to memory corruption (probably caused by a driver).
Please run these two tests to verify your memory and find which driver is causing the problem. Please run verifier first
If you are over-clocking anything reset to default before running these tests.
In other words STOP!!!
If you do not know what this means you probably are not
1-Driver verifier (for complete directions see our wiki here)
2-Memtest. (You can read more about running memtest here)
Wanikiya and Dyami--Team Zigzag

How to update ADRT-REMARK field (by which tcode)?

How to update ADRT-REMARK field (by which tcode)?

Hi,
ADRT-REMARK basically stores the notes which you enter against any communication number such as Telephone Number, Fax number etc for any business partner.
Say for example if you want to address details of a customer via XD01 or XD02; then in the communication tab enter the telephone number or fax number.
Click the button to add more details or more telephone numbers.
Over there you will find a field called as Comments.
This field is ADRT-REMARK.
You do not have a single transaction to maintain this field.
It depends upon the business partner for whom you want to add the details.
For a customer it is XD01 or XD02
For a vendor it is XK01 or XK02.
For a business partner it is BP.
For a user it is SU01D.
Regards,
Ankur Parab

Bad System call. Macbook pro wont start up

Hello,
I seem to have come across a problem. I thought it happened after trying to install new software through X11. I restarted my macbook pro and received about 15 error messages all containing information about certain extensions not being installed properly. I remember one being about my 802.11 airport but I havnt altered anything to do with it.
When I turned my macbook off and on again I got a black screen with info about about bad system calls, throttling too quickly etc..
I noticed a number of people mentioning the i tunes update which I tried to install before it completely died and it wouldnt actually finish the update so i just force quit software updates. Now my machine doesnt do a thing: when I turn it on I receive the apple symbol with the spinning cog and eventually it goes back to the black screen with the bad system info.
I started in single user and tried fsck - fy and it said everything was ok. I tried to start in safe mode however when I turn my macbook pro on I dont hear the chime- therefore I dont seem to be able to enter safe mode.
If anybody can help ASAP it would be much appreciated- got lots of work that needs doing on it:)
cheers
Graeme

Try here > Mac OS X: Gray screen appears during startup

Bad pool caller error

Sir i have windows 8 32-bit professional. when i open specific hard drive location i.e local disk E it restart saying BAD POOL CALLER error. here is alink of skydrive where are my dump file please analyze it and answer me.....
https://skydrive.live.com/#cid=899F33253DF40A69&id=899F33253DF40A69%21111

it looks like Avast (aswSP.SYS) is the cause:
BAD_POOL_CALLER (c2)
The current thread is making a bad pool request. Typically this is at a bad IRQL level or double freeing the same allocation, etc.
Arguments:
Arg1: 00000000, The caller is requesting a zero byte pool allocation.
Arg2: 00000000, zero.
Arg3: 00000001, the pool type being allocated.
Arg4: 6e557641, the pool tag being used.
Debugging Details:
BUGCHECK_STR: 0xc2_0
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
PROCESS_NAME: explorer.exe
CURRENT_IRQL: 0
LAST_CONTROL_TRANSFER: from 81e4f05d to 81e25b98
STACK_TEXT:
nt!KeBugCheckEx
nt!ExAllocatePoolWithTag
WARNING: Stack unwind information not available. Following frames may be wrong.
aswSP
SYMBOL_NAME: aswSP+2caf3
Image path: \SystemRoot\System32\Drivers\aswSP.SYS
Image name: aswSP.SYS
Timestamp: Tue Oct 30 23:43:45 2012
So update Avast or uninstall it, if there is no Windows 8 compatible version.
btw, why do you use the checked Build (Built by: 9200.16384.x86chk.win8_rtm.120725-1247)?
"A programmer is just a tool which converts caffeine into code"

How to solve Bad Pool Caller issue (Windows 8.1)

I have encountered blue screen Bad Pool Caller error on my Windows 8.1 today. It happened a couple times today. I don't know why this happen.
Here is my dumps file of skydrive link.
https://skydrive.live.com/redir?resid=72664CEADF63A3F5%211215
Thanks a lot!

RW
It is never a good idea to have more than one active malware application as it leads to all sorts of instability and crashing. This is your problem. You have Kaspersky (in my opinion a leading cause of these) and Symantec (also a huge contributor)
I would remove them both and use the built in defender of some other malware application.
I would remove Kaspersky and use the built in defender.
Kaspersky is a frequent cause of BSOD's.
http://support.kaspersky.com/downloads/utils/kavremover10.zip
Symantec is a frequent cause of BSOD's.
http://us.norton.com/support/kb/web_view.jsp?wv_type=public_web&docurl=20080710133834EN
Debug session time: Thu Feb 6 18:43:59.993 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-41875-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 0:22:40.705
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 1e0, ffffe00001527878}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 00000000000001e0, Memory contents of the pool block
Arg4: ffffe00001527878, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 18:20:37.094 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-46765-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 0:39:00.806
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 0, ffffe0000c3c51c8}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000000000000, Memory contents of the pool block
Arg4: ffffe0000c3c51c8, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 17:26:36.420 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-61921-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 0 days 1:58:33.132
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for SYMDS64.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMDS64.SYS
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
*** WARNING: Unable to verify timestamp for klflt.sys
*** ERROR: Module load completed but symbols could not be loaded for klflt.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 3, ffffe000010880d8}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000000000003, Memory contents of the pool block
Arg4: ffffe000010880d8, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨¨``
Debug session time: Thu Feb 6 15:27:20.675 2014 (UTC - 5:00)
Loading Dump File [C:\Users\Ken\SysnativeBSODApps\020614-63265-01.dmp]
Built by: 9600.16452.amd64fre.winblue_gdr.131030-1505
System Uptime: 3 days 22:11:14.531
*** WARNING: Unable to verify timestamp for klwfp.sys
*** ERROR: Module load completed but symbols could not be loaded for klwfp.sys
*** WARNING: Unable to verify timestamp for kneps.sys
*** ERROR: Module load completed but symbols could not be loaded for kneps.sys
Probably caused by : NETIO.SYS ( NETIO! ?? ::FNODOBFM::`string'+797c )
BugCheck C2, {7, 1205, 8a2baf8, ffffe00008a2bb88}
BugCheck Info: [url=http://www.carrona.org/bsodindx.html#Example]BAD_POOL_CALLER (c2)[/url]
Bugcheck code 000000c2
Arguments:
Arg1: 0000000000000007, Attempt to free pool which was already freed
Arg2: 0000000000001205, (reserved)
Arg3: 0000000008a2baf8, Memory contents of the pool block
Arg4: ffffe00008a2bb88, Address of the block of pool being deallocated
BUGCHECK_STR: 0xc2_7_NDnd
PROCESS_NAME: System
FAILURE_BUCKET_ID: 0xc2_7_NDnd_NETIO!_??_::FNODOBFM::_string_
MaxSpeed: 2200
CurrentSpeed: 2195
BiosVersion = F.14
BiosReleaseDate = 01/04/2013
SystemManufacturer = Hewlett-Packard
SystemProductName = HP ENVY m4 Notebook PC
Wanikiya and Dyami--Team Zigzag

Bad Pool Caller on startup

I'm getting a Bad Pool Caller and Bad Pool Header errors upon startup.
I can't even get to the desktop or to Metro screen so I can't get any log or dump files.
It started after I accidentally installed an older version of Norton Utilities which had compatibility errors. The PC reset itself and came up with a Blue Screen error. saying
"Your PC ran into a problem and we need to restart, Just collection some data"
Each time it immediately restarts.
When I get to the Recovery screen I select advanced repair options, troubleshoot, Advanced Options, Startup options.
I've tried safe mode and but it just keeps repeating the same thing.
I also tried to Startup Repair but that failed too!
I would love to get in to uninstall Norton. Can you give me any advise.

You should first make sure that there is the latest drivers installed from the manufacturer's website.
Have you chance to upload a memory dump to your SkyDrive drive that we can analyze what is going on?

BADI Impl Called in which TCode

Similar Messages

Maybe you are looking for