BAdI/method for limiting Delivery type list for webshop

Hello everyone,
I need your help: I have requirement is to limit some Deliver types when ordering in the b2b webshop (webshop only not others). I'm searching for a BAdI (I don't want to hardcode in order.jsp) and debuging/looking into CRM_ISA_BASKET_HEAD. Can someone please tell me which BAdI and method? or any suggestions?
Thanks, Jin

Hi Freda,
Check CRM_SHIPPING_MAINTAIN_OW or CRM_SHIPPING_CHANGE_OW.
hope it helps....
Regards,
Anil.

Similar Messages

Internet sales - List for the delivery type

Hello everybody,
In ISA, when you are connected, and you go in the basket page. You have an list option for the delivery type with "Standard", "Pick up" etc...
I want to modify the element list. Exactly i want to delete one of teh option.
How could i do that.
Somebody knows how to do that?

I found the solution, you can configure in the shopadmin, the option you want to display in the catalog page.

Message No delivery type defined for supplying plant BP01 and document type

Hi all,
I am trying to create a purchase order with a BP01 supplier and the BP02 division but I get the following error message No delivery type defined for supplying plant BP01 and document type.
When I create a PO with a BP02 supplier and the BP01 I do not get any message.
How can I fix it ?
Thanks
Regards
Pierre

1)Create one Customer for Supplying Plant Sales area and assign this Customer no with Receiving Plant in OLME---> PO -
> Set up STO -
> define Shipping Data for plants. and maintain the same sales area in your Supplying plant.
2) In OLME---> PO -
> Set up STO.....for your Document Type: UB and Suppying plant Combination assign Del. Type NL and Checking rule RP
3) In OLME---> PO -
> Set up STO...for your Supplying Plant and Receiving Plant combination Maintain Doc. Type : UB
Make sure you are maintaining Sales View for your Material at Supplying Plant.
4) Maintain Shipping point at, SPRO----> Logistics Execution -
> Shipping -
> Basic Shipping Functions -
> Shipping Point Determination for Plants.....there for your Loading group,Shipping Condition, Shipping Plant combination maintain Shipping plant..
Now Create STO in ME21N with Doc.type: UB at Receiving Plant.
Then Create Delivery in VL10B from Supplying Plant...
Then Do PGI in VL02N from supplying Plant.
Then do GR at Receiving Plant based on Outbound Delivery at Receiving Plant...

In PO No delivery type defined for supplying plant and document type MRO

Hi,
i need urgent solution for this problem please.
i am getting this error while creating stock transport order PO(intercompany)
No delivery type defined for supplying plant (ex:1500) and document type MRO .
thanks
madhu

Hi,
i am getting problem in vendor master data
1) recently we started inter company stock transfer order (STO)process for a vendor (delivery plant), the same vendor was using before for internal procurement for some other company code /plant, i made settings in vendor master last screen ie conditions , sales data and control data ,and took path from main menue selected extras-> addtional purchasing data tab to enter plant under plant assignment tab to work STO. now we are unable to create PO for other company and pur org(non STO company code /plant) with the STO vendor,if i remove plant under plant assignment tab in vendor master , it is effecting inter company STO,
i need solution for this , please help me by giving valuable solution.
Thanks and Regards
MM

No delivery type defined for supplying plant 6110 and document type ZSTD

Hi all,
I am trying to create a purchase order with a P6110 supplier and the 6115 plant but I get the following error message No delivery type defined for supplying plant p6110 and document type.
When I create a PO with a 6115 supplier and the 6110 I do not get any message.
How can I fix it ?
Thanks
Regards
SAGAR

>
sagarn wrote:
> Hi all,
>
> I am trying to create a purchase order with a P6110 supplier and the 6115 plant but I get the following error message No delivery type defined for supplying plant p6110 and document type.
>
> When I create a PO with a 6115 supplier and the 6110 I do not get any message.
>
> How can I fix it ?
> Thanks
> Regards
> SAGAR
If ZSTD is a copy of UB type PO, then you need to provide the plant number as the supplier. The delivery type can be configured in the following path
Materials Management -> Purchasing -> Purchase Order -> Set up Stock Transport Order -> Assign Delivery Type and Checking Rule
Copy and existing record and maintain the combination of your PO type (ZSTD), supplying plant (6110) and delivery type (NL). Leave the others the same.
Regards,
Aroop

Error:-No delivery type defined for supplying plant and document type RB

Hi,
Here issue is such that while creating purchase order(Return order type)the error coming as follows.
"No delivery type defined for supplying plant and document type RB"
Scenario:-There are some damaged goods which are coming from france vendor to ukrain customer,now ukrain customer wish to send back the damaged goods to france.
Looking forward:-1>Can anyone please let me know if there is an any customizing setting required if yes then how to maintain(navigation).
2>Is it something like practically it is not possible as goods are dispatched back to the country from where it is coming.
Thanks for your help !!!
Dharmesh

Hi Naveen,
Thanks for the information !!!
Futher while creating PO i am getting an error message as purchase org. not responsile for plant how to solve this error can you plz let me know.
Regards,
Dharmesh

Error with clob column: "No pl/sql translation for the blind type given for this bind variable"

This is reports 11g
I've got a clob column. Reports seems to recognize its type, but if I try to reference it in a format trigger, I get this error at compile time:
"No pl/sql translation for the blind type given for this bind variable"

Actually, Reports is in something better than Forms.
Neither Forms nor Reports do not have "complete" SQL engine (both have only "complete" PL/SQL engine), but have their own SQL parser, which does not understand SQL commands after the database 8.0.
But, in Reports Data Model - SQL Query Statement, we can write "modern" SQL statement (> database 8.0), because Reports sent it directly to the database, without using their own SQL parser.
For example, in Reports Data Model - SQL Query Statement, we can write this (scalar subquery expressions, in bold):
select empno,
       ename,
       deptno,
       (select dname from dept where deptno = emp.deptno) dname
from emp
order by empno;
although scalar subquery expressions was introduced in the database 9.0.1, and in databases 8.0 and 8.1 we should write someting like this:
select emp.empno,
       emp.ename,
       emp.deptno,
       dept.dname
from emp,
       dept
where dept.deptno = emp.deptno
order by empno;
Regards,
Zlatko

Entry date in blank for limited Contract Type

Hello,
I've set up the feature ENTRY with the value EINDT X for my molga, but when I run a hiring action and in infotype 16, in the field Contract Type I use a Limited contract Type, and when I run the report S_AHR_61016362 (Flexible Employee
Data) the Entry Date Column is in blank but it does not happen when I use Unlimited Contract Type.
Does anyone can help me?

Hi,
This feature provides entry date definition method to function module HR_ENTRY_DATE. In your case it reads following fields from IT0016:
1. EINDT "Initial Entry"
2. KONDT "Date of Entry into Group"
First of all check that you entered one of these fields for employees with temporary contract.
Cheers

Cutom ribbon button and valid RegistrationId for an External Type List

I'm developing a custom ribbon bar command for my particular External Content Type list. I know that for the command to be shown correctly I need a valid RegistrationId which would correspond to my list. But it seems to be unclear for me what to set there
if I use the button against an Extarnal Content Type list because RegistrationId=101 or 100 doesn't work there . Any suggestions?

Hi,
For your requirement, here are three workarounds for your reference:
1. Use JavaScript to hide the button accordingly.
Add custom ribbon button for this kind of list, then add a JavaScript snippet to the list views or different forms to hide that button according to the checking result
of the list name.
2. Create a custom list definition and create list with ribbon button based on it.
After the site provisioned, delete the original list and create a new list with based on this list definition with similar columns.
3. Make another site template contains this list with the custom ribbon button.
Best regards
Patrick Liang
TechNet Community Support

View for multiple Content Type List

Hello
I have a SP list with multiple Content types.
i want add a kind of view for the list that have diffrent content types for the some item/record.
it means that every time someone edit this item and change/add diffrent data in diffrent contant type
is there any way to do that?
or there is a way to add the Content type dropdown list in Display view and not just in Edit view? can i do it in SP Designer?

Hi Avinoam, do you have access to InfoPath? You can do what your asking with that program.
cameron rautmann

Fetching accessible record type list for any user

How to get list of standard record types being accessible for any user role?
One solution - We know the entire list of standard record types, so we can keep trying to access each record type and if we get access violation exception, then skip that record type. This solution is NOT a good idea as it will be poor in performance and may become insufficient in future version of OCOD (which may have more standard record type than the count present today).
Is there any direct API available? or any generic solution?

Hello,
this is the forum for the tool {forum:id=260}. Please mark this question as answered, so others know that they can ignore it.
Then post again in {forum:id=75}
Regards
Marcus

Order type field for PO/Document type field for PR

Hi Everybody
a) In Purchase Order creation screen (ME21)-for order type field -NB(standard order) is coming as default-How to make it blank(since we are using plantwise PO NOs)
b)In purchase requisition screation screen(ME51)also Document type-NB(standard order) is coming as default-How to make it blank(since we are using plantwise Purchase requisitions)
Thanks in advance
Joseph David

Simple,In order of ME21/ME51,Press F4,Select Required order/requistion type,Add it to Favourite list
or else
Create a transaction variant for ME21 & ME51 using t.code SDH0.
Transaction Variant - A Step by Step Guide for Creation,Check below link,
http://wiki.sdn.sap.com/wiki/display/Snippets/TransactionVariant-AStepbyStepGuidefor+Creation
Edited by: Jeyakanthan A on Apr 2, 2010 5:42 PM

Storage Bin for Interim Storage Type 902 for GR

Hi,
We know that the the dynamic storage bin for goods receipt for PO is the PO number. However, when we are posting GR, system creates TR with interim storage bin as material document number.
I looked into the movement type config. However, we can only state that whether interim bin should be cordinates or fixed bin or dynamic bin. It has no way to mention what that dynamic bin would be.
Can you please suggest a way to change the dynamic storage bin as PO number instead of material document number.
Thanks,
Shekhar

Dear Shekhar,
Could you please check in view V_T308 (transaction code OMNF) whether the indicator "Dynamic bin material document" is set for your warehouse number and requirement type B?
Best regards,
Christiane
Edited by: Christiane Schnellenbach on Apr 12, 2010 10:25 PM

URL for reporting BUGS in iWeb. URL for reporting a WISH LIST for next iWeb

1
Can someone please send the URL for the page in which one can report bugs in iWeb?
2
Same thing for simple old Wishes and Hopes for the next iWeb if they are not one and the same URL/page.
Thank you.
Lorna in Southern California

Lorna....
All is well....actually doing a little jet-setting
over here and there...you can check the updates on my
website....thanks for your email...
Regarding the feedback to Apple....if you ever forget
the website, you can always look under the iWeb menu
while you are working (that's when you run into these
bugs anyways) and pick "Send Feedback to Apple".
That'll send you to the same webpage for feedback
submission!
Hi James I'm glad that you are ok. And thank you for the hint about the bug reports on iWeb menu. It makes a lot of sense putting it there; I just never noticed it.
iWeb has a bad blog bug
I'd like to stomp it royally
Instead I'll send a feedback hug
(She said, behaving loyally.)
All is said and all is done
Let's get the Raid bomb just for fun.

Recommended EBO/EBM/EBS for Equipment Delivery to Customer (for communicati

Team –
Based on your past experiences with AIA, what AIA FP EBO/EBM/EBS’s (Communication Industry) do you guys recommend for following actions ??
•     Create Shipment Order ( I found ShipmentRequestEBM/CommunicationsShipmentRequestEBSV1 in AIA FP but not sure?)
•     Print Invoice and Print Label for shipping equipment to customer
•     Check Shipment Delivery status (Periodically)
Please let us know. Really appreciate your guidance in this matter.
Thanks-

Now-a-day all services are rapidly becoming commodities and where constantly evolving industry trends has service providers to increasingly focus on improving customer-centricity, launching new and differentiated service offerings, and reducing operational costs.
Option 1 - use oracle pre-built integration
The Pre-Built Process Integration Packs will enable customers an application agnostic, multi-channel business integration solution that can be extended and sustained cost effectively and supporting evolution to Oracle Fusion Applications by ensuring interoperability.
Option 2 - Do it yourself - use oracle foundation pack
The Foundation Pack will enable customers with a complete building block for building any to any integrations across a complex, mixed environment. It is backed up by infrastructure components.
Thanks..Suman

BAdI/method for limiting Delivery type list for webshop

Similar Messages

Maybe you are looking for