Cutom ribbon button and valid RegistrationId for an External Type List

I'm developing a custom ribbon bar command for my particular External Content Type list. I know that for the command to be shown correctly I need a valid RegistrationId which would correspond to my list. But it seems to be unclear for me what to set there
if I use the button against an Extarnal Content Type list because RegistrationId=101 or 100 doesn't work there . Any suggestions?

Hi,
For your requirement, here are three workarounds for your reference:
1. Use JavaScript to hide the button accordingly.
Add custom ribbon button for this kind of list, then add a JavaScript snippet to the list views or different forms to hide that button according to the checking result
of the list name.
2. Create a custom list definition and create list with ribbon button based on it.
After the site provisioned, delete the original list and create a new list with based on this list definition with similar columns.
3. Make another site template contains this list with the custom ribbon button.
Best regards
Patrick Liang
TechNet Community Support

Similar Messages

I hit the power button and it runs for a second then turns off but the power buttton stays lit

i hit the power button and it runs for a second then turns off but the power buttton stays lit

What machine?
Mac Pro? Mac Pro what?
If Mac Pro, wrong forum. Go here:
Mac Pro

APP-FND-02900: Validation failed for Subfunction function type

Hi,
I am new to registering a custom form in E-biz 11.5.10. I am getting the below error when registering a new custom form in E-biz 11.5.10
1. Created the .fmb and moved to TOP and created the .fmx file
2. Create the form in the Applicatin Developer resp. Application -> form
*3. For creation of new function in Function --> Description entered the details and then in the form tab after enter details, I am getting the below error message when selecting SAVEbutton*
APP-FND-02900: Validation failed for Subfunction function type. Form should not contain value.
Best Regards,
Mahesh.

user8564931 wrote:
Hi,
I am new to registering a custom form in E-biz 11.5.10. I am getting the below error when registering a new custom form in E-biz 11.5.10
1. Created the .fmb and moved to TOP and created the .fmx file
2. Create the form in the Applicatin Developer resp. Application -> form
*3. For creation of new function in Function --> Description entered the details and then in the form tab after enter details, I am getting the below error message when selecting SAVEbutton*
APP-FND-02900: Validation failed for Subfunction function type. Form should not contain value.
Best Regards,
Mahesh.Please do not post duplicates -- APP-FND-02900: Unable to Create New cusom Form function in E-biz 11.5.10

Oui is valid but for a machine type other than current

Hi all,
I am installing SAP ERP 6 on a Windows 2008 r2 server. I have Intel Xeon CPUs 64bits. However, as I start "oracle Universal Installer" (ou)i on it, I got a message that says "that oui is valid but for a machine type other than current". I guess is beacuse of the CPU, but I am not completely sure,
Thank you in advanced for your help

Same question of thread:
http://scn.sap.com/message/13352961

Custom ribbon button does not show for a Tasks list

I created a simple app using Visual Studio 2012 to add a custom ribbon button for a tasks list. After deploying the app to the SharePoint online, the button does not appear on the ribbon. The exact same button gets displayed properly
when added to the ribbon for a custom list. The elements file with the location of the button gets generated, so I can't imagine it would be wrong, but just in case, this is what I have:
<CustomAction Location="CommandUI.Ribbon"....
<CommandUIDefinition Location="Ribbon.ListItem.Actions.Controls._children">...
Any help is greatly appreciated.
One more thing, if I add this button using SharePoint Designer 2013, the button does not get displayed either. I have a feeling it might be problem with the Tasks list?
Thanks

Hi Danny,
The button needs to be displayed only for one specific list. And as I mentioned, the elements file for the ribbon button was generated by VS, here is the content:
<Elements xmlns="http://schemas.microsoft.com/sharepoint/">
<CustomAction Id="02aa4c3b-bb73-4dfa-989c-d63a9591dcee.RibbonCustomAction" RegistrationType="List" RegistrationId="{$ListId:Lists/Projects;}" Location="CommandUI.Ribbon" Sequence="10001" Title="Create Project Site">
<CommandUIExtension>
<CommandUIDefinitions>
<CommandUIDefinition Location="Ribbon.ListItem.Actions.Controls._children">
<Button Id="Ribbon.ListItem.Actions.RibbonCustomActionButton" Alt="Create Project Site" Sequence="100" Command="Invoke_RibbonCustomActionButtonRequest" LabelText="Create Project Site" TemplateAlias="o1" Image32by32="_layouts/15/images/placeholder32x32.png" Image16by16="_layouts/15/images/placeholder16x16.png" />
</CommandUIDefinition>
</CommandUIDefinitions>
<CommandUIHandlers>
<CommandUIHandler Command="Invoke_RibbonCustomActionButtonRequest" CommandAction="~remoteAppUrl/Pages/Default.aspx?{StandardTokens}&SPListItemId={ItemId}&SPListId={ListId}"/>
</CommandUIHandlers>
</CommandUIExtension >
</CustomAction>
</Elements>
If the same button is added for a custom (not a Tasks) list, the button shows up fine.
Thanks

SSRS & Report Viewer control - Show the print button and fire print for multi page report in Mozilla & Chrome

I have reports in SSRS. I am using remote reports. Reports have multiple pages.
In IE, the print button displays, but in Firefox and Chrome, it does not display.
Below links shows how to display the print button for mozilla and chrome. These solutions only fire the print for the
current page in the report viewer-
http://stackoverflow.com/questions/951009/sql-reporting-services-print-button-not-shown-in-mozilla
http://stackoverflow.com/questions/4208457/ssrs-print-button-in-chrome-and-firefox
I need to be able to issue a print command for all
pages in one go from the reportviewer.

Hello,
The common workaround about print button on ReportViewer control for non-IE browsers is add ActiveX print control or create Print function. It has pros and cons.
I am not good at programming. But you can try to disable page breaks by setting InteractiveHeight to 0 so that the report will rendering in single page with Report Viewer control.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Name of the table where can get the two fields Valid-From and Valid-to for

Hi gurus
I want name of the table where I can get the two fields Valid-From and Valid-To and their relation ship with the header table in BOM
Regards
Kaisar

You can only get the Valid from date from the table STKO.
To get the valid to date, you have to take one day less than the valid-from date of the next record for the same BOM.
Alternatively use the Function module:
CSAP_MAT_BOM_READ
It will give both valid from and valid to dates in the tables parameter: T_STKO
Regards,
Ravi
Edited by: Ravi Kanth Talagana on Jul 2, 2008 4:37 PM

Schedule changes and validity dates for prices in product catalog(SRM-MDM)

Hello!
I'm working on a project that is going to use SRM-MDM and the question is if it is possible to schedule changes(for example to add new prices that have a validity period, can you make the changes now that are going to be valid from 1st of februari?Or can I add products today that are only going to be available to buy from a particular date?).
The other question is if it is possible to have a validity period for prices and when the date is valid,then the product is shown in the catalog.In the same way that when the date is not valid, the product is not shown in the catalog.Can this be made automactically?Can a logic be build to choose which products are going to be shown in the catalog?
Do you have any suggestions for those issues?
Thanks in advance!

Dear Poster,
As no response has been provided to the thread in some time I must assume the issue is resolved, if the question is still valid please create a new thread rephrasing the query and providing as much data as possible to promote response from the community.
Best Regards,
SDN SRM Moderation Team

Formatting and Validation Options for a Form: go() versus call()

Hello.
Under a Form's "Formatting and Validation Options," the screen says:
"On successful submission of a form, execute this PL/SQL block or PL/SQL procedure:
Hint: You can redirect your browser to a PL/SQL procedure, for example a procedure that creates a Web page, using either of these methods:
call('<url>', '<parameter name for back url>');
Redirects the browser to the procedure and passes a parameter containing the URL back to the form.
go('<url>');
Redirects the browser to the procedure but does not pass a URL to return to the form."
I can get the go() procedure to work but not the call(). Here are the particulars:
1. I created a simple page.
2. I created a Form and placed it on the page.
3. I have PL/SQL code added to the "On successful submission of a form..." section of the Form so that when the user enters a transaction this code executes.
4. Unfortunately, the go() procedure redisplays the Form but not the underlying page.
I'm guessing (hoping) that if I can properly format the call() procedure instead, it will successfully display the underlying page and this Form. But no matter how I format the second parameter of the call() procedure I get the error "HTTP 400 Bad Request" "The web page cannot be found"
Can anyone provide a simple, working example for the call() procedure? Thanks for any insight.

Hello.
Under a Form's "Formatting and Validation Options," the screen says:
"On successful submission of a form, execute this PL/SQL block or PL/SQL procedure:
Hint: You can redirect your browser to a PL/SQL procedure, for example a procedure that creates a Web page, using either of these methods:
call('<url>', '<parameter name for back url>');
Redirects the browser to the procedure and passes a parameter containing the URL back to the form.
go('<url>');
Redirects the browser to the procedure but does not pass a URL to return to the form."
I can get the go() procedure to work but not the call(). Here are the particulars:
1. I created a simple page.
2. I created a Form and placed it on the page.
3. I have PL/SQL code added to the "On successful submission of a form..." section of the Form so that when the user enters a transaction this code executes.
4. Unfortunately, the go() procedure redisplays the Form but not the underlying page.
I'm guessing (hoping) that if I can properly format the call() procedure instead, it will successfully display the underlying page and this Form. But no matter how I format the second parameter of the call() procedure I get the error "HTTP 400 Bad Request" "The web page cannot be found"
Can anyone provide a simple, working example for the call() procedure? Thanks for any insight.

The itunes store wont let me download anything i click the buy button and it asks for my password but it wont download

when i went to itunes on my computer it would start downloading the apps i purchased on my phone but would get stuck a processing file, then when i went to purchase a movie i would click the buy button and it would ask my password but then would not purchase or download. So i decided to buy the movie from my phone and then try to download on my computer from the purchased section but still wont download on my computer and it doesnt give me a reason why

The Apple Support Communities are an international user to user technical support forum. As a man from Mexico my first language is Spanish. I do not speak English, however I do write in English with the aid of the Mac OS X spelling and grammar checks. I also live in a culture perhaps very very different from your own. When offering advice in the ASC, my comments are not meant to be anything more than helpful and certainly not to be taken as insults.
Are you putting in the address where the bank sends the monthly statement?
Apple's servers are very picky about the format of the address. If you live in the USA, then the server is expecting the style that the US Postal Service uses. One way to do this is to use the USPS ZIP Code lookup service;
https://tools.usps.com/go/ZipLookupAction!input.action
Enter the address to look up the ZIP code and then copy the exact USPS output into your iTunes account information.

Ribbon Button activating when a field in the Document / List item metadata = 'Yes'

Im hoping this is an easy answer as Im sure it must be, but my mind has gone blank!
Basically I have created a button to run some javascript code to fire a custom (manual) workflow on an item that is selected in a Document Library (or List)
I have set the ribbon button to only be active IF one item is selected in the Library but what I want now is to only activate the ribbon button if one item is selected AND IF a specific field in the item = 'Yes' (The field in this case being called 'DraftDoc'
[Choice field]).
Ive tried a few methods but none seem to work and VS2012 errors on debugging.
My code to enable the button so far is:
// Method to enable/disable the button on the ribbon.
function EnableSubmitDraftDocument() {
// request number of selected items.
var items = SP.ListOperation.Selection.getSelectedItems();
var count = CountDictionary(items);
// only return true is a single item is selected.
return (count == 1);
Can anyone help me with the extra code I need?
Cheers

Hi,
According to your description, you have been able to set the ribbon button to be actived if one item is selected. Now, you want to activate the ribbon button if there is one
item selected and the value of "DraftDoc" column is "Yes".
We can achieve it by getting the value of this "DraftDoc" column of the selected item to check whether it is "Yes".
Here is a code demo about checking whether the value of "DraftDoc" column of the selected item for your reference:
function retrieveSelectedFiles()
this.clientContext = SP.ClientContext.get_current();
var web = this.clientContext.get_web();
this.selectedItem = SP.ListOperation.Selection.getSelectedItems();
this.selectedList = SP.ListOperation.Selection.getSelectedList();
if (CountDictionary(selectedItem) == 1)
this.listItem = web.get_lists().getById(this.selectedList).getItemById(this.selectedItem[0].id);
this.clientContext.load(this.listItem);
this.clientContext.executeQueryAsync(Function.createDelegate(this, onRequestSucceeded), Function.createDelegate(this, onRequestFailed));
function onRequestSucceeded() {
str = listItem.get_item('DraftDoc');
if(str == 'Yes')
str+="Yes";
alert(str);
function onRequestFailed(sender, args) {
alert('Error: ' + args.get_message());
Best regards
Patrick Liang
TechNet Community Support

Validation Rule for Accounting Document type

Hello Experts
I have an requirement to block certain accounting doc type to get vendor line item post in that. For that I tried to block direct through OBA7 but not be able to also can't delete number range as it is shared by another doc type. My last option is Validation rule but i never work on this ,so any suggest how to create validation rule " To Block Accounting Doc type SO THAT THERE WILL NOT BE ANY line item posting occur in that doc type.
Regards.

ok sure. OB28 callpoint 1. Create a step under this callpoint.
1) Prerequisite is as follows: note XXXX is your company code and ZZ is your doc type.
BKPF-BUKRS = 'XXXX' AND
BKPF-BLART = 'ZZ'
2) Then you need to enter the check. Here you can just put FALSE.
3) The last part is to create your message. Message type E so they get an error and then create a message number in the class that you choose and give it a description:
Document Type 'ZZ' is not allowed
Save it and wah lah!
Let me know how it goes.
Thanks,
Jes

TS3742 My apple after the startup and holding p+r + control+ option goes to a screen with a locked padlock and a space for me to type I've entered my admin password but nothing seems to happen and it can't get my iMac into safe mode or anything this is al

My iMac at start up goes to the apple logo with the spinning symbol under neath it.
After a while it goes into a screen with a prohibited symbol.
I can't boot it into safe mode or single user mode only thing I can do is press the control, option and p,r keys and that leads me to a locked screen with a bar under neither it for me to type a password or something I've tried my admin password many times and nothing happens
WHAT DO I DO

Sounds like you have a firmware password set.
As you can't do that accidentally, you surely must know the password (which is different from your admin password)?

File Dialog (Details View and Multiple Selections for View File Type)

I would like to use the generic windows dialog box found in the toolbar under:
File I/O/Advanced File Functions/File Dialog
What I would like to do is have multiple selections for the file type, for example one menu selection is *.txt, another is *.rtf, another is *.csv, etc. Listing a single type is straightforward.
Also does anyone know if there is a way to have the dialog open in the DETAILS view automatically?
Thanks for any help!
Carlton

Hi,
You can do it in following ways:
1. Write in pattern input the string "*.txt; *.csv; *.rtf". This will show to the user only files with this extensions in the dialog.
2. Another way is to create ring or menu where user could specify the extension. Depending on this extension you could wire the appropriate string to the pattern input of "File Dialog.vi"
I have made an example.
Good luck.
Oleg Chutko.
Attachments:
fileopen.vi ‏42 KB

Problem with ribbon buttons and macros

I made my first custom Ribbon tab, with the following code:
Code Block
<customUI xmlns="http://schemas.microsoft.com/office/2006/01/customui">
   <ribbon>
       <tabs>
           <tab id="Adnet" label="Adnet" insertAfterMso="Add-ins">
               <group id="NetVision" label="NetVision alati">
                   <button id="Brisanje" label="Brisanje" size="large" onAction="Brisi()" imageMso="Delete" />
       </group>
           </tab>
       </tabs>
   </ribbon>
</customUI>
That puts a new tab and a button in my ribbon. But when i click the button, it executes the Brisi() macro twice (?!) and then it shows a mesage box with only "400" written in it (link to picture of message box). If I run the macro alone, without the button, it executes fine.
What's the problem?

Excel is the program in question.
I made an add-in with one module and with the altered ribbon. In the module there is a Sub routine Brisi() and it has the following code:
Code Block
Sub Brisi()
    Debug.Print ("Opened.")
End Sub
When I click the button, the debug window shows "Opened." twice. And the before mentioned "400"
When I remove the "()" from the .xml it results in this.
I'll put the whole extension on the net, and then You can try. I would be extremely grateful

Cutom ribbon button and valid RegistrationId for an External Type List

Similar Messages

Maybe you are looking for