BAM installation Error

Hi
While i am trying to install BAM Release version 3(10.1.3.1.0) after uninstalling the OracleBAM. I am getting the following error message.
"oracle database client installation did not complete successfully
please resolve errors in the installaction log file in c:\OracleBAM\ClientForBAM\cfgtoollogs\oui then restart this installer "
But i have deleted the folder "OracleBAM " from above path after the uninstallation.
I have tried installing the BAM after restarting the mechine.But it does not works.
Please any one help me to solve the error.
Thanks in Advance

Problem solved:
If there is a space in the filename for the installation software (setup.exe) then the re-installation will fail - even when the original installation went ok.
Move the extracted BAM DVD to another location (e.g. c:\temp ) and start again.
Then it will work.
cu
Andreas

Similar Messages

BAM Installation Error 1935

Installing BAM with Enterprise Link, during initial install encountered errors with ASP which has been resolved. Performed uninstall and attempted resinstall. Getting the following error:
Product: Oracle BAM -- Error 1935.An error occurred during the installation of assembly 'Oracle.BAM.ADC.Common,Version="3.5.6008.0",PublicKeyToken="0AE9AB9443FBDB8D",Culture="neutral",FileVersion="3.5.6008.0"'. Please refer to Help and Support for more information. HRESULT: 0x80131700. assembly interface: , function: CreateAssemblyCache, component: {3DB16667-C7E1-401C-8C92-8205D6C57DF2}
Any assistance would be much appreciated.

Hi, I am also facing the same error message. Did you find any workarounds for this?
Please guide....

BAM Installation Error - ValidateDB.exe

Hello,
While installing BAM in Windows Server 2003, the first part of the install goes fine. Upon entering database connection and user information, we get the following error (the title for the message box is "ValidateDB.exe - Common Language Runtime Debugging Services"):
"Application has generated an exception that cannot be handled.
Process id=[this changes each time], Thread id=[this changes each time]
Click OK to terminate the application.
Click CANCEL to debug the application."
Upon click OK, another message box appears:
"Install cannot connect to the database located at parameter #1, [myhost:myport]. Please, ensure that the hostname, port and service name are correct and that the database and its listener at this location are up an running".
I can TNSPING the DB and connect to the DB. Why are we getting an unhandled exception like this (the same error occurs regardless of what is put into the DB fields)?

Hi All,
I had the exact same problem for connecting to the database. I de-installed all BAM components (had to clean registry entries) and I tried to do a fresh install. The Client for BAM was installed but when I tried to install BAM components, it just hangs after Database User Creation Screen. I also do not have a fresh machine to work on. Please help!
Thanks,
-Lakshmi

Problem in BAM installation

I have done all those pre requisites needed for BAM installation and while I am entering fields for 'datebase connect information' , (say sys password:, Hostname and port name, and service name) and pressing on next, the wizard goes through another window , something like 'Database user creation'
I have entered the password for the default users (orabam and orasagent) and after entering all those, upon clicking on next I am getting an error which says "install cannot connect to the database located at parameter #k2--121909.wipro.com:1521, please ensure that the hostname, port and service name are correct and that the database and its listner at this location are up and running"
where k2--121909 is the host name and wipro is the domain name and the service name that I gave was XE and my tnsnames.ora looks like this
# tnsnames.ora Network Configuration File: E:\OracleBAM\ClientForBAM\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = K2--121909.wipro.com)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = TCP)(HOST = HOSTNAME)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PLSExtProc)
I am getting this error despite doing everything correctly. I have installed my oracle client, all those prerequisites , XEDatabase etc and my listeners are up ..
So can anyone tell it to me why is it happening like this despite having everything correct... Kindly feel free to post a mail to [email protected]

Hi..
Pls check if you are able to connect to XE using Sqlplus.... also chk if ur able to execute the command tnsping XE successfully....
Thanks

BAM upgrade error

Hi all,
Firstly, I upgrade from 10.1.3.3 and get huge of errors in sadcsvc.log , like :-
[TTM01|3984|3280|UT Utility|Service Lib|Info|1/25/2010 11:25:57.969|C:\SADCSVC.LOG]
Attempting to start Service.
[TTM01|3984|3824|UT Utility|Service Lib|Info|1/25/2010 11:25:57.985|C:\SADCSVC.LOG]
SaUtServiceMain starting.
[TTM01|3984|3824|UT Utility|Service Lib|Error|1/25/2010 11:26:33.282|C:\SADCSVC.LOG]
CoCreateInstance failed hr = 0x80080005.
[TTM01|3984|3824|UT Utility|Service Lib|Error|1/25/2010 11:26:33.282|C:\SADCSVC.LOG]
Exception in SaUtServiceMain.
[TTM01|3984|3824|UT Utility|Service Lib|Error|1/25/2010 11:26:33.313|C:\SADCSVC.LOG]
SaUtSetServiceStatus: Exception: Exception
UT -- 0x5, UT -- 0x7E
WinResult: 80080005
Server execution failed
Later on , I have re-installed the BAM and up to 10.1.3.4, this time I can start successfully.
Could you any expert please explain why this problem is happening be cause I am just following the same installation guide from oracle?
Actually, I didn't change any settings , all default.

Follow exactly the same steps as in BAM installation guide 10.1.3.3. It's working before upgrade, and now after I reinstall 10.1.3.3 and upgrade to 10.1.3.4 using the same steps, the problem not out.

Adobe creative cloud installation error 201

adobe creative cloud installation error 201
How to solve this problem?

Install Adobe application manager and try updating to CC desktop application.
Adobe - Adobe Application Manager : For Windows : Adobe Application Manager : Thank You

My iTunes wont update, and I can't connect my new iPhone if it doesn't update. It says error when I try to update, and I cant download it because of a "Windows Installer" error...

I just not a new iPhone and in order to sync it I need the newest iTunes, but I can't update it! I tried checking for updates and then trying to downlaod it. I get this error: "Errors occured while installing the updates. If the problem persists, chose Tools > Download Only and try installing manually."
Where on earth is Tools anyway?
When I tried just reinstalling all of iTunes, I had a Windows Installer error...I don't even know what that is!

tools is at the top of the apple updater but dont get your hopes up

Software Update, 10.6.6 installation error!!

Hi all, hope someone can help.
I have a Mac Pro running 10.6.5. I upgraded to 10.6.5 recently and had problems with this. When using Software Update, it would download, log out and install only to get an error at the end saying it couldn't install, with no explanation of why. I did some investigation and it boiled down to Safari (one of the updates in the list to install along with 10.6.5) wasn't being replaced. I had to delete Safari from my applications folder before updating. I tried rebuilding permissions and even installed from the installers from the apple download page. but until I deleted Safari from my apps folder it would fail every time.
Since I assumed that it was a corrupt copy of safari and all other update went ok I assumed I had fixed the problem.
Now I'm trying to install the update of 10.6.6 via Software Update. and I'm getting the same problems. It downloads, reboots, installs then at the end says that it was not installed because of an error and promps me to restart.
I have downloaded the update and run it from the desktop and it goes through the install as follows:-
Installing
optimizing system
Moving files
installation failed.
It seems that it isn't able to replace existing files on my system with new ones therefore fails the install.
Has anyone got any ideas? I have repaired permissions with disk utility and tried repairing them while booting from the 10.6.3 system disc, still no joy
Many thanks

Worse problem here. I get the installation error then the computer attempts to reboot and I get locked at the gray background apple screen. Tried safe boot power on +SHIFT a status bar comes up and goes 3/4 away across and locks. Running permissions repair from Mac OEM disk set was no help. Had to do a time machine restore. Seems my install error is catastrophic. On the upside time machine works very well.. A bit disappointed with my Windows-esque crash

When i try to add DownloadHelper it comes up with unexpected installation error review the error console log for more details - 203, how to it check the log and how do i fix this problem?

== Issue
==
I have another kind of problem with Firefox
== Description
==
When i tried to install DownloadHelper this happened Firefox could not install the file at
https://addons.mozilla.org/en-US/firefox/downloads/latest/3006/addon-3006-latest.xpi?src=addondetail
because: Unexpected installation error
Review the Error Console log for more details.
-203
, how do i check the log and how do i resolve this problem? thank you
== This happened
==
Just once or twice
== today
==
== Troubleshooting information
==
Application Basics
Name
Firefox
Version
3.6.3
Profile Directory
Open Containing Folder
Installed Plugins
about:plugins
Build Configuration
about:buildconfig
Extensions
Name
Version
Enabled
ID
Ask Toolbar for Firefox
2.1.0.5
true
AVG Safe Search
9.0.0.783
true
{3f963a5b-e555-4543-90e2-c3908898db71}
Java Console
6.0.17
true
Microsoft .NET Framework Assistant
1.1
true
{20a82645-c095-46ed-80e3-08825760534b}
BitDefender Antiphishing Toolbar
2.0
true
[email protected]
Modified Preferences
Name
Value
accessibility.typeaheadfind.flashBar
0
browser.places.smartBookmarksVersion
2
browser.startup.homepage_override.mstone
rv:1.9.2.3
extensions.lastAppVersion
3.6.3
general.useragent.extra.microsoftdotnet
(.NET CLR 3.5.30729)
network.cookie.prefsMigrated
true
places.last_vacuum
1276351876
print.print_printer
HP Photosmart D5300 series
print.printer_HP_Photosmart_D5300_series.print_bgcolor
false
print.printer_HP_Photosmart_D5300_series.print_bgimages
false
print.printer_HP_Photosmart_D5300_series.print_command
print.printer_HP_Photosmart_D5300_series.print_downloadfonts
false
print.printer_HP_Photosmart_D5300_series.print_edge_bottom
0
print.printer_HP_Photosmart_D5300_series.print_edge_left
0
print.printer_HP_Photosmart_D5300_series.print_edge_right
0
print.printer_HP_Photosmart_D5300_series.print_edge_top
0
print.printer_HP_Photosmart_D5300_series.print_evenpages
true
print.printer_HP_Photosmart_D5300_series.print_footercenter
print.printer_HP_Photosmart_D5300_series.print_footerleft
&PT
print.printer_HP_Photosmart_D5300_series.print_footerright
&D
print.printer_HP_Photosmart_D5300_series.print_headercenter
print.printer_HP_Photosmart_D5300_series.print_headerleft
&T
print.printer_HP_Photosmart_D5300_series.print_headerright
&U
print.printer_HP_Photosmart_D5300_series.print_in_color
true
print.printer_HP_Photosmart_D5300_series.print_margin_bottom
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_left
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_right
0.5
print.printer_HP_Photosmart_D5300_series.print_margin_top
0.5
print.printer_HP_Photosmart_D5300_series.print_oddpages
true
print.printer_HP_Photosmart_D5300_series.print_orientation
0
print.printer_HP_Photosmart_D5300_series.print_pagedelay
500
print.printer_HP_Photosmart_D5300_series.print_paper_data
9
print.printer_HP_Photosmart_D5300_series.print_paper_height
11.00
print.printer_HP_Photosmart_D5300_series.print_paper_size_type
0
print.printer_HP_Photosmart_D5300_series.print_paper_size_unit
1
print.printer_HP_Photosmart_D5300_series.print_paper_width
8.50
print.printer_HP_Photosmart_D5300_series.print_reversed
false
print.printer_HP_Photosmart_D5300_series.print_scaling
1.00
print.printer_HP_Photosmart_D5300_series.print_shrink_to_fit
true
print.printer_HP_Photosmart_D5300_series.print_to_file
false
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_bottom
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_left
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_right
0
print.printer_HP_Photosmart_D5300_series.print_unwriteable_margin_top
0
privacy.sanitize.migrateFx3Prefs
true
security.warn_viewing_mixed
false
== Firefox version
==
3.6.3
== Operating system
==
Windows Vista
== User Agent
==
Mozilla/5.0 (Windows; U; Windows NT 6.0; en-GB; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 (.NET CLR 3.5.30729)
== Plugins installed
==
*-npdivxplayerplugin
*Default Plug-in
*Adobe PDF Plug-In For Firefox and Netscape "9.3.2"
*The QuickTime Plugin allows you to view a wide variety of multimedia content in Web pages. For more information, visit the QuickTime Web site.
*NPRuntime Script Plug-in Library for Java(TM) Deploy
*6.0.12.732
*RealPlayer(tm) LiveConnect-Enabled Plug-In
*RealJukebox Netscape Plugin
*Shockwave Flash 10.0 r45
*Adobe Shockwave for Director Netscape plug-in, version 11.5
*iTunes Detector Plug-in
*DivX Web Player version 2.0.0.254
*GEPlugin
*4.0.50524.0
*Office Live Update v1.4
*NPWLPG
*Windows Presentation Foundation (WPF) plug-in for Mozilla browsers
*RealPlayer(tm) HTML5VideoShim Plug-In
*Google Update
*Next Generation Java Plug-in 1.6.0_20 for Mozilla browsers

Mark Leary:
As TXGuy posted above:
See:
https://support.mozilla.com/en-US/kb/Unexpected+installation+error+-203+when+installing+add-ons
http://kb.mozillazine.org/Unable_to_install_themes_or_extensions_-_Firefox#Unexpected_installation_error_-203
Also see:
http://support.mozilla.com/en-US/kb/Profiles#How_to_find_your_profile
http://kb.mozillazine.org/Show_hidden_files_and_folders

ITunes 12.1.1 installation errors and resolution (Win 7, 64 bit)

I am providing all of the installation errors I had experienced
and all of the methods I had tried until I finally came up with a solution.
Hopefully the details will help you see if your situation has similarities
which hopefully will make this post helpful in terms of a solution.
PART ONE: INSTALLATION ERRORS
I received the following installation errors
when attempting to update to 12.1.1
and later once I uninstalled and attempted to reinstall 12.1.1.
I used this link for the download:
http://www.apple.com/itunes/download/?cid=wwa-us-kwg-music-itu
> itunes 6464setup.exe
I then tried this link:
http://support.apple.com/kb/DL1614
> itunes 12.1.1 64 bit
Again 6464 in the name.
After uninstalling the iunes,
I discovered under add/remove programs:
apple application support 32 bit
and apple support update
I deleted these and restarted the PC.
I then tried reinstalling a NEW version
from the second link above.
Opened download iTunes 6464setup.exe >
Windows installer> iTunes > welcome to itunes
> next > installation options > install > user account control
> yes > next > (error message via pop-up window):
ERROR MESSAGE ONE
"An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32",
version = "8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b"
processorArchitecture ="amd64".
Please refer to Help and Support
for more information.
HRESULT: 0X80070091"
> OK > iTunes > Status: Starting services >
(error message via pop-up window):
ERROR MESSAGE 2
"Service 'Apple Mobile Device Service' (Apple Mobile Device Service)
failed to start. Verify that you have sufficient permission to start system services"
SIDE NOTE
There was a USB cable connected to the PC to charge the iPhone,
but the iPhone was not connected. I detached the USB cable from the PC in case it's relevant.
(I did not reattach the USB cable until I finally got a copy of itunes to install. You will see later in this post below.).
I then clicked Retry.
ERROR MESSAGE 2 AGAIN
I received the identical 'Apple Mobile Device Service' error as above.
I then clicked Ignore.
iTunes > Status
> User Account Control pop-up window)
> Do you want to allow to install Apple iTunes>
Yes >
> Congratulations > Finish
> (iTunes pop-up error window):
> iTunes Helper
ERROR MESSAGE 3
a)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 "
> (iTunes pop-up error window)
> iTunes
b)
"Apple Application Support was not found.
Apple Application Support is required to run iTunes.
Please uninstall iTunes and install iTunes again.
Error 2 (Windows Error 2)"
> OK > OK
ERROR MESSAGE 4
I received all of these errors above
when I had tried a fresh install before returning to the forum to search for answers.
When I had first tried a fresh install, I didn't get as far as the Congrats.
I only got as far as the first and second error listed above
("An error occurred during installation of assembly Microsoft VC80 CRT Type ="win32"...
AND Service 'Apple Mobile Device Service' (Apple Mobile Device Service").
Clicked on iTunes icon on desktop
ERROR MESSAGE 5
I receive the (iTunes pop-up error message window)
error 2 windows error 2 (identical to what's listed listed under 3b).
PART 2 - INSTALLATION RESOLUTION
The issue finally is resolved.
HERE IT IS!!!
1) Uninstall iTunes
2) check remaining Apple programs
(click control panel > programs > uninstall)
> check the listed Apple programs
Apple Application Support 32 bit,
Apple Mobile Device Support,
Apple Software Update,
Bonjour
3) Locate and save the correct file version of iTunes for your OS and System.
In my case, it's Win 7.
You must check for the System Type.
Computer > right click to properties > system type.
In my case its 64 bit.
The 32 bit installer is named iTunesSetup.exe,
while the 64 bit installer is named iTunes64Setup.exe.
I learned that some folks had experienced issues with
the 64 bit installer on the Apple site whether it's
because they had downloaded the 32 bit
when they needed the 64 and therefore
couldn't complete the install or in my case,
what appears to perhaps be a corrupted file that stated 6464 in the .exe file name.
This lead me to believe that finding the file with the correct file name and
correct file size to prove it authentic for that version would likely be part of
the solution if not the solution. File Hippo is one suggested means to locate the file.
I locate the iTunes download "iTunes64Setup.exe" that matched the size of the file
to a valid copy of that version of ITunes and I set it aside.
4) I then made sure that all old copies
and remnants of iTunes and Apple software
has been uninstalled by checking add/remove.
Then C: program files
and then C: program files (x86),
then running CC Cleaner,
then cleaning the registry using CC Cleaner
and then checking Tools under CC Cleaner.
***I discovered under Tools that there were remaining Apple files listed
after the uninstall of iTunes and other files had taken place under iTunes***
I visit tools under CC Cleaner and deleted the remaining Apple files
including Apple Application Support, Mobile Device Support, and Bonjour,
***but I leave the Apple Software Update folder as is, in tact***
under C: Program files (x86) and Tools of CC Cleaner and under Add/Remove.
5) I restart the computer, install the new copy of iTunes 12.1.1 (64 bit),
iTunes64Setup.exe, and it installed with zero errors.
Hope someone will find this useful. Good luck.

Try the "for older video cards" version.
For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Open BAM.xla error

My Biztalk environment follow:
Win2008R2 SP1 + SQL2008R2 SP1 + Excel2010 + VS2012 + Biztalk2013
when I open bam.xla , It repeat 10 times that appears some errors.
"Could not load an object because it is not available on this machine."
and then, I try to new one "BAM Activity".
It appear debug window with in Microsoft Visual Basic for Application.
But, I try replace original bam.xla with Biztalk2010 bam.xla.
There is no errors now.
Why?
Is this a biztalk2013 bam.xla error?
how can I fix it?
Thanks a lot.
K.D. Chen

Thanks boatseller reply.
How can I confirm Excel 2010 with 32-bit?
I have a confuse. Why did I use biztalk 2010 bam.xla is work?
To use biztalk2013 bam.xla is fail.
Since biztalk2010 bam.xla is work, may I say my environment is fine?
Thanks a lot,
K.D. Chen

Multiple BAM installations on the same machine?

Hi guys,
I have a customer with the following requirement:
"We have installed BAM 10.1.3.3 with EL and upgraded to 10.1.3.4. It is currently using a remote database 10.2.0.3 in our test envt. We want to use the same Windows server for monitoring our Development enviroment also using the Dev database. Is it feasible or will it corrupt the IIS of the windows machine already running BAM 10.1.3.4. Please provide your recommendations on this, whether to have separate windows servers or we can have multiple BAM installations on same server."
Any ideas on this?
Thanks in advance,
Catalin
Oracle Support Services

Multiple BAM 10g installations on the same box is not supported.

Photosmart printer -all-in-one 5520 and windows 8.1 - INSTALLATION ERROR

I have a photosmart printer - model: all-in-one 5520; code number HPC57CC4 and my operating system is windows 8.1.
I had problems with the scan function and so I decided to disinstal the printer (from the Control Panel) and I even cancelled the HP folders.
Then I tried to reinstal the printer with the original CD but I got the message: INSTALLATION ERROR - DRIVER PACKAGE INSTALL GIVES THE ERROR -536870329 FOR THE PACKAGE C:\Program Files\HP\HP Photosmart 5520 series\DriverStore\Pipeline\hpvpl09.inf (that's the translation from Italian)
I have tried endless times to install with the online software from the HP assistance (hppsdr.exe, hppiw.exe, ps5520_1315-1.exe, hpscan and doctor) but I always get the above error message, the system recognizes my printer, but gives the error message few seconds after starting installing it.
If i use the printer from other PCs it's ok, I've also tried both in the wireless modality and with the USB cable but the result is the same: no installation!
thanks in advance fot your help.
denise

Hi @denig,
Welcome to the HP Forums!
I noticed that you are having trouble installing your HP Photosmart 5520 on Windows 8.1. I am happy to help you with this installation issue!
Please try the following solutions:
Uninstall the software. Uninstalling the Printer Software. (In case any was partially installed).
Clean boot the computer. How to perform a clean boot in Windows.
Make sure no antivirus programs are running. Turn Windows Defender on or off.
Make sure the firewall is disabled. Disabling the computer's firewall on a Windows 8 or Windows 8.1 computer.
Re-install using the HP Printer Install Wizard for Windows.
Hope this helps you resolve your issue, and have a good day!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Installation error in invoking target 'agent nmhs'

Dear All,
I am new to this forum and I would like to inquire about the reasons behind a specific installation error of Oracle 11gR2 on Fedora 13 and the way to fix it. The error led to a weired behavior for the EM. I am going to explain everything precisely to flap the correspondence time so please please please bare with me.
I have followed precisely all the pre-requisites for preparing the installation environment (Fedora 13 Linux OS) by following the instructions in the manual that comes on the source installation Disk-1of Oracle 11g R2, like assigning the environment variables, setting kernel parameters, installation of all the required and necessary packages, creating the necessary directories and changing the owner ship, in addition to creation the user 'oracle' and the necessary groups. This installation ends up with a successful working database that can be accessed using sqlplus locally and remotely from another machine. My EM also worked but for a limited period of time for only about 10 to 15 min then after that I cannot access it due to a problem in the agent background process or daemon that is resulted from the error happened during the installation, and need to restart my machine. Here is what happened.
My installation is a stand alone database (database control / console database). Everything went smoothly during the installation except the following error that I couldn't get rid of or fix it, and I just continued the installation by clicking on the continue button of the OUI alert window. The error message on the alert window is:
Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
and here is the contenets (error part) of the installActions2010-06-24_03-22-15PM.log file
INFO: /usr/bin/ld: /u01/app/oracle/product/carried(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
*/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line*
*/u01/app/oracle/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation*
INFO: collect2: ld returned 1 exit status
*INFO: make[1]: --- [u01/app/oracle/product/carried] Error 1*
INFO: make[1]: Leaving directory `/u01/app/oracle/product/carried'
*INFO: make: --- [emdctl] Error 2*
INFO: End output from spawned process.
INFO: ----------------------------------
INFO: Exception thrown from action: make
Exception Name: MakefileException
Exception String: Error in invoking target 'agent nmhs' of makefile '/u01/app/oracle/product/11.2.0/dbhome_1/sysman/lib/ins_emagent.mk'. See '/u01/app/oraInventory/logs/installActions2010-06-24_03-22-15PM.log' for details.
Exception Severity: 1
INFO: Calling Action unixActions10.2.0.3.0 ; make
registerOnly = false
installMakePath = /usr/bin/make
installMakeFileName = /u01/app/oracle/product/11.2.0/dbhome_1/rdbms/lib/ins_rdbms.mk
installTarget = all_no_orcl
undoMakeFileName =
installArguments = ORACLE_HOME=/u01/app/oracle/product/11.2.0/dbhome_1
logFile = /u01/app/oracle/product/11.2.0/dbhome_1/install/make.log
undoTarget =
progMsg = Linking RDBMS Executables
After all the above, I am going to explain here how this error affected the EM. Here is the output of starting the dbconsole:
$ emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control .... started.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
and here is the output of the status of the dbconsole
$ emctl status dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
http://bassam-desktop:1158/em/console/aboutApplication
EM Daemon is not running.
Logs are generated in directory /u01/app/oracle/product/carried-desktop_orcl/sysman/log
notice the EM Daemon (agent background process) is not running
Becuase of this error, the actual status of the database is not shown up in the EM. For example, if I try to startup my database through the EM, it starts successfully, but its status will not be shown, same thing happens for the listener. Clicking the View Details link in the EM after starting up the database shows up the following:
SQL*Plus: Release 11.2.0.1.0 Production on Sat Jun 26 03:43:36 2010
Copyright (c) 1982, 2009, Oracle. All rights reserved.
SQL> Connected to an idle instance.
SQL> SQL> ORACLE instance started.
Total System Global Area 1489829888 bytes
Fixed Size          1336624 bytes
Variable Size          922749648 bytes
Database Buffers     553648128 bytes
Redo Buffers          12095488 bytes
Database mounted.
Database opened.
SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent is Not Running
again notice the last line of the message Agent is not running.
After all the above, I beleive that the installation error is the cause of all that. I would appreciate it if you could help me solving this problem. Thanks.
Bassam A. Al-Khaffaf

Hi,
I have successfully installed Oracle 11g R2 after some manual intervention to solve this linker error.
The linker error actually gave the useful hint to solve this problem:
INFO: /usr/bin/ld: /home/akos/app/akos/product/11.2.0/dbhome_1/sysman/lib//libnmectl.a(nmectlt.o): undefined reference to symbol 'B_DestroyKeyObject'
/usr/bin/ld: note: 'B_DestroyKeyObject' is defined in DSO /home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so so try adding it to the linker command line
/home/akos/app/akos/product/11.2.0/dbhome_1/lib/libnnz11.so: could not read symbols: Invalid operation
collect2: ld returned 1 exit status
This means that the gcc linker phase lacked an option for "-lnnz11". I run "make agent nmhs" manually,
so the last command that gave an error can be copy&pasted to the command line. Adding "-lnnz11"
after "-lcore11" to the command made it run successfully, and also re-running "make agent nmhs"
on the command line didn't fail now. Then I chose the "Retry" button in the installer GUI and it proceeded.
This change in the Fedora 13 linker was announced at
http://docs.fedoraproject.org/en-US/Fedora/13/html/Release_Notes/sect-Release_Notes-The_GCC_Compiler_Collection.html
In Fedora 12 and earlier it was allowed to an app with library A and the app was able to use symbols
from every other libraries (B, C, ...) that library A was linked with. In Fedora 13 this is not allowed anymore,
your app needs to be linked explicitely with library B, C, etc.
Later, there was another problem with SELinux not allowing text relocation in .../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1
which was solved by running:
chcon -t textrel_shlib_t '.../product/11.2.0/dbhome_1/lib/libclntsh.so.11.1'
and re-running configuration of "Oracle Net Configuration Assistant". This allows keeping SELinux on.
After that, installation and setup of the first database succeeded on Fedora 13.

ITunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25

iTunes stopped working on Windows 7, 64 bit. Uninstalled and attempted to reinstall. Windows installer error....iTunes. 10.6.3.25.
Downloaded latest version onto desktop. Will not complete install.

Many thanks.
Let's try the following user tip with that one:
"There is a problem with this Windows Installer package ..." error messages when installing iTunes for Windows

BAM installation Error

Similar Messages

Maybe you are looking for