BAM LASTSNAPSHOTTIME

Hi,
i have a problem, when i start "albpmwarehouse" for update bam schema of my bpm enterprise, i see that the column LASTSNAPSHOTTIME of table BAM_LASTSNAPSHOTTIME is enhanced with a date -2h (approximately). Exist a configuration file or other solution to get exactly the date of the server?
This is my configuration.
BEA AquaLogic(TM) BPM Enterprise for Application Server
Versione: 6.0.5
Build: #99118

I have the same problem.

Similar Messages

  • ERROR WHILE RUNNING ODI SCENARIO FROM BAM ALERT

    We are using oracle data integrator 11g and have created an ODI Scenario and able to run the scenario from ODI studio client.
    We have done the configuration for BAM-ODI integration as mentioned in http://docs.oracle.com/cd/E21764_01/integration.1111/e10224/bam_odi.htm#BABEJIGD
    We have started ODI Agent, soa and bam servers. Created a BAM alert -> select action - Run ODI Scenario -> selected the same scenario.
    Alert ran at scheduled time but failed with following error:
    java.io.IOException : truncated data integrator frame received
    Error Message (if any)
    [2012-08-06T11:24:21.046+05:30] [bam_server1] [WARNING] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Error occured while running a ODI Scenario.
    [2012-08-06T11:24:21.250+05:30] [bam_server1] [ERROR] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Action exception: EEInstEv2 EEInstAct1 Rule
    Id: 2 exception: java.io.IOException: truncated Data Integrator Frame
    received
    [2012-08-06T11:24:21.250+05:30] [bam_server1] [WARNING] []
    [oracle.bam.eventengine] [tid: bam-pool-Action-thread-1] [userId:
    OracleSystemUser] [ecid:
    3576f9092ef9497a:-743c430a:138fa7450c3:-8000-00000000000000a8,1:23453] [APP:
    oracle-bam#11.1.1] EventEngine: Exception stack trace: [[
    at
    oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScena
    rio.java:145)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionP
    rocessor.java:891)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(Actio
    nProcessor.java:337)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.j
    ava:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.bam.system.Delegate$Sink.invoke(Delegate.java:80)
    at oracle.bam.system.Delegate.dynamicInvoke(Delegate.java:186)
    at
    oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.proc
    essWorkRequest(ThreadPoolController.java:155)
    at
    oracle.bam.common.threading.threadpool.ThreadPoolController$PoolQueueItem.run(
    ThreadPoolController.java:128)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java
    :886)
    at
    java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908
    at java.lang.Thread.run(Thread.java:619)
    Any help on this is highly appreciated...
    Thanks
    Rajdip Mukherjee

    Hi,
    Forgot to include the ODI classes RunScenario.invokeScenario() is invoking odi scenario using odi sdk api. Please see the below stack trace :-
    java.io.IOException: truncated Data Integrator Frame received
    at
    oracle.odi.sdk.invocation.internal.AgentNetworkCmd.readCmd(AgentNetworkCmd.java:303)
    at
    oracle.odi.sdk.invocation.OdiInvocation.invokeCommand(OdiInvocation.java:176)
    at
    oracle.bam.eventengine.engine.event.action.RunScenario.invokeScenario(RunScenario.java:140)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.runScenario(ActionProcessor.java:891)
    at
    oracle.bam.eventengine.engine.event.action.ActionProcessor.actionHandler(ActionProcessor.java:337)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at
    sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at
    sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    Thanks
    Rajdip Mukherjee

  • Error in Starting Oracle BAM Active Data Cache

    I am not able to start "Oracle BAM Active Data Cache" on my machine.
    The other two components "Oracle BAM Event Engine" and "Oracle BAM Report Cache" are starting properly.
    When I see the event log file of my Computer I could see the details as below:
    Event Type: Error
    Event Source: Oracle BAM Active Data Cache
    Event Category: None
    Event ID: 0
    Date: 2/7/2007
    Time: 3:51:25 PM
    User: N/A
    Computer: CHNANDA-WXP
    Description:
    ActiveDataCache: The Oracle BAM Active Data Cache service failed to start. Oracle.BAM.ActiveDataCache.Common.Exceptions.CacheException: ADC Server exception in Startup(). ---> Oracle.DataAccess.Client.OracleException ORA-12541: TNS:no listener at Oracle.DataAccess.Client.OracleException.HandleErrorHelper(Int32 errCode, OracleConnection conn, IntPtr opsErrCtx, OpoSqlValCtx* pOpoSqlValCtx, Object src, String procedure)
    at Oracle.DataAccess.Client.OracleConnection.Open()
    at Oracle.DataAccess.Client.OracleConnection.Open()
    at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.GetServerVersion()
    at Oracle.BAM.ActiveDataCache.Kernel.StorageEngine.Oracle.OracleStorageEngine.Startup(IDictionary oParameters)
    at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
    --- End of inner exception stack trace ---
    at Oracle.BAM.ActiveDataCache.Kernel.Server.DataStoreServer.Startup()
    at Oracle.BAM.ActiveDataCache.Kernel.Server.Server.Startup()
    at Oracle.BAM.ActiveDataCache.Service.DataServer.Run()
    For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
    Could anyone pls help me?
    Thanks and Regards,
    Chinmaya Nanda

    hi Chinmaya -can yoy tell us your companyname,project ? Your problem is very simple.BAM ADC is notable to reachoracle db.fromyour dos prompt- try tnsping <yrDB> [default  is oraclebam  or orcl  ]/ Also see FAQ pages. there is a requirement on dos prompt setting, with <clientforBAM>as 1st parameter

  • Unable to add external data source in BAM : Error ORA-12505

    Hi,
    In BAM,
    Im trying to add an external data source for creating a data object.
    But when i try to test the connection i get the following error:
    Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    Source: "java.sql.SQLException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor "
    Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor
    Source: "oracle.net.ns.NetException: Listener refused the connection with the following error: ORA-12505, TNS:listener does not currently know of SID given in connect descriptor "
    As mentioned in another post ((Listener does not currently know of SID given in connection descriptor
    i tried
    lsnrctl stop.
    delete listener.ora
    lsnrctl start
    lsnrctl reload
    But still get the same error;
    Im able to access the database with the specified username and password using sqlplus.
    Your help will be appreciated.
    Regards
    Vignesh Ramanathan

    For #5, not Windows, ConfigMgr 2012 R2. Anything before ConfigMgr 2012 R2 is not supported for the 8.1 ADK.
    For the permissions, what accounts are you setting this for. In general, if the share is on the same server, Everyone Full or Read on the Share and System Full or Read on the NTFS should work.
    For the error message, it looks like you are trying to import an OS Image and not an OS Install Package. OS images use a WIM file and OS Install Packages use the entire set of source files from the media. For OS images, you must thus explicitly point it
    to a specific WIM file.
    Jason | http://blog.configmgrftw.com

  • BAM getting random timeouts calling BPEL web service as alert rule

    I have a BAM alert rule set up to call a BPEL process (web service call basically). This is part of our custom error notification and escalation solution.
    In production I randomly see timeouts in the BAM event engine logs where the web service call has timed out. On the BPEL side these processes never show as being invoked, nor are they in manual recovery.
    This only happens at random times, although usually in "clumps" lasting a few minutes. The rest of the time this has been fairly reliable.
    Any help from the BAM experts would be appreciated. I would open an SR on this, but I have found support to literally take days/weeks to get back to me on BAM issues -- and this particular issue does not seem to be reliably reproduceable.
    Here is the event engine log message:
    2008-01-31 14:46:35,303 [ActionThreadPool (dynamic 11309)] ERROR - EventEngine Action exception: EEInstEv218067 EEInstAct218066 Rule Id: 1 exception: The operation has timed-out. (http://mcsbpel:8888/orabpel/MAEF/svcMaefErrorAlert/1.0)
    2008-01-31 14:46:35,303 [ActionThreadPool (dynamic 11304)] ERROR - EventEngine Action exception: EEInstEv218066 EEInstAct218065 Rule Id: 1 exception: The operation has timed-out. (http://mcsbpel:8888/orabpel/MAEF/svcMaefErrorAlert/1.0)
    2008-01-31 14:46:35,303 [ActionThreadPool (dynamic 11309)] WARN - EventEngine Exception stack trace: at Oracle.BAM.Middleware.EventEngine.ExternalActions.WebServiceCaller.TakeAction(Hashtable oParameters, String strDataObject, Hashtable oDataValues, Hashtable oDataTypes)
    at Oracle.BAM.EventEngine.Actions.TakeExternalAction.TakeAction(String strSysIterID, Hashtable oParameters, String strDatasetName, XmlDocument xmlSchemaDoc, IDictionary intDataDictionary)
    at Oracle.BAM.EventEngine.Actions.ActionProcessor.ExternalAction(ActionQueueItem oActionQueueItem)
    at Oracle.BAM.EventEngine.Actions.ActionProcessor.ActionHandler(Object state, DateTime requestEnqueueTime)
    2008-01-31 14:46:35,303 [ActionThreadPool (dynamic 11304)] WARN - EventEngine Exception stack trace: at Oracle.BAM.Middleware.EventEngine.ExternalActions.WebServiceCaller.TakeAction(Hashtable oParameters, String strDataObject, Hashtable oDataValues, Hashtable oDataTypes)
    at Oracle.BAM.EventEngine.Actions.TakeExternalAction.TakeAction(String strSysIterID, Hashtable oParameters, String strDatasetName, XmlDocument xmlSchemaDoc, IDictionary intDataDictionary)
    at Oracle.BAM.EventEngine.Actions.ActionProcessor.ExternalAction(ActionQueueItem oActionQueueItem)
    at Oracle.BAM.EventEngine.Actions.ActionProcessor.ActionHandler(Object state, DateTime requestEnqueueTime)

    I should note that both BPEL and BAM are at version 10.1.3.1

  • New changes are not getting reflected in the bam reports.

    Hi
    I have created a BPEL process and it polls the data from a table and populate an object created in Bam.I have accomplished the above task by createing two database adaptors.One is on 10g database and another one is on Bam database.I have created a view based on the bamobject and used a database adaptor to populate the data. BPEL process is populating the data properly to that bamobject but those changes are not reflecting to bam reports automaticaly. We need to refresh the report or reprompt the report to see the changes.Could some help me to reslove this issue.
    Thanks in advance
    Laj Abraham

    Hi charles
    I have tried that option too.But that is also not working. BPEL Procees is able to populate the BAM object with the help of the sensor.But those changes are not getting reflected in BAM Reports.But if i create or update an existing record in BAM object through BAM Architect, those changes are getting reflected in BAM Reports(No manual intervention is required).
    Your help in this regard is highly appreciated.
    Thanks
    Laj Abraham

  • Oracle BAM : Tabs are not getting displayed

    Hi
    Just started working in Oracle BAM. I opened exisiting reports that came with the installation. Now when I click on Edit View -> "Data" button in the "View" Editor of an existing report ; the following tabs shld be displayed as per the BAM user guide : DataObjects, Fields, Filter, Drilling ...etc .
    But none of the tabs are comming in the browser. In fact 7 empty tabs are dispalyed and are disabled.
    When I click on "Properties" in the "View" editor ; all the tabs are comming and I can click on the tabs and edit the properties. But the tabs under "Data" option is not working.
    I have deployed SOA suite 11.1.1.3 on wls 10.1.3. I am using IE 7. Any pointers will be helpful!!
    Thanks

    This link solved the problem for me.
    REQD for Fresh BAM Install 11.1.1.3.0 -Data labels missing issue

  • Currenc BAM (bosnia) is not in Table TCURR

    Hi Team,
    we have problem  ,   still we are maintaining BAM currency in TCURR table  but when we upload the data credit card details
    system shows error message " Currency BAM is not in Table TCURR   transaction were moved to table  PTRV_CCC for correction
    we are maininting Exchaqnge rate like below
    GBP to BAM
    can any one guide me where is the Mistake ,
    thanks
    Ranamka

    hi,
    Please check the "exchange rate type" M, E, etc, if that´s the same using in TM in configuration
    BR
    Monica Ordaz

  • Currency BAM is not in Table TCURR transaction were moved to table PTRV_CCC

    Hi Team,
    we have problem , still we are maintaining currency  BAM not in TCURR table but when we upload the data credit card details
    system shows error message " Currency BAM is not in Table TCURR transaction were moved to table PTRV_CCC for correctionot
    we are maininting Exchaqnge rate like below
    GBP to BAM
    can any one guide me where is the Mistake ,
    thanks
    Ranamka

    Hi,
    To resolve this error, you will need the exchange rate defined in the TCURR table (ob08). Once defined, sap will just validate that it exists in teh system. The real exchange rate will be what Diner provides so the employees will see the correct GBP amount and the exchange rate from Diner (not from what you define in TCURR) and so the reimbursement in CAD will match what Diner is billing the employee.
    Depending on your config, the exchange rate field should be grayed out for credit card charges so that employees cannot change it and so the amounts will always match the billed amount.
    Hope this helps.
    Sal

  • Issues with BAM Connection in JDeveloper

    I have issue with Jdeveloper BAM connection.
    After BAM & OiD configuration, I can't test BAM connection in Jdeveloper. Jdev reports BAM configuration error.

    I've created new one.
    Actually, I have to return to Windows auth, cause cust should make report develoopment.
    Could you provide any information how BAM connection shold be connfigured? I'll make next try.

  • Use case for showing records in report view BAM based on version number

    Hi,
    I have a use case to update records based on version no. Let say I have a table or data object in BAM called 'Notes'. The Notes dataobject has three fields Id, Version, Description. The Notes data is displayed in a BAM report. I need to just display the latest version of the Notes. Say two records with one with Id as '124' and Version '4' and another with Id as '124' and version as '5'. The record related to version 5 should be dispalyed to user. How will I introduce this check in BAM reports for the latest version?
    Thanks
    Edited by: user5108636 on 28/06/2010 16:47

    That you see you're prints only means that your method outta called. The code creates a new row, but never inserts the row into the rowset. Then you call execute query which loses any connection to the new route which is not part of the rowset.
    First action would never to call insertRow(r1) on the view object.
    If you change data this way, only the model layer knows about it, the ui can't know about this (one of the disadvantages of using plsql or this construct you try). You have to tell the view controller to update it's data to. For this you can execute the iterator in the binding layer and/or ppr the container showing your data.
    Then I don't see any complicated plsql called do I question if a programmatic co is necessary.
    Timo

  • Difference between refresh of Report in Active Viewer and Active Studio BAM

    We use the Oracle SOA Suite with BAM (on Linux) 10.3.2.0.
    I have 2 questions:
    1. We have made a report with several items and in Active Studio --> Select Report --> Edit mode --> I see the correct values for my report. When I open my report in Active Viewer I see data from yesterday. The report is not being refreshed. How can I change this, what is causing this difference between Active Viewer and Active Studio in Edit mode??
    2. One of my items in my report always gives the message: opening (only in Active Viewer, in Active Studio/edit mode I can see the correct data).

    Is your popup blocker turned off? I can only imaging that the popup blocker may be keeping the Live Data window from appearing and updating the dashboard. Active Studio doesn't do a Live update, but an update on report load.

  • How to show the processing time taken for a BPEL process in BAM report.

    Hi All,
    I have the data as below in the Data object. I would like to show the time taken for each order to complete in the report.
    instance Id     order Id     product Name     product Code     price     status     instance Time      updaterName
    1360010     ord004     Guitar     prod003     2000     requested     9/22/2008 12:12:11 PM     Invoke_InsertSalesOrder
    1360010     ord004     Guitar     prod003     2000     Approved     9/22/2008 12:15:11 PM     Invoke_OrderStatusUpdate
    This data comes from simple BPEL process where sensors are configured at the start and end of BPEL process. Also have a human task activity in between to create the time difference.
    In Enterprise link design studio, I tried to calculate the time difference using expression calculator and store it as calculated field. But that doesn't seems to work because when I execute the plan, second sensor data reaches only after human approval whereas first sensor data would be waiting for calculation and ultimately nothing comes into data object.
    How and where the calculation be done to show the processing time in the report. Please someone throw some light on this.
    Regards
    Jude.
    Edited by: user600726 on Sep 30, 2008 1:30 AM

    I would suggest modifying your data object so that the data can all be in a single row and use the sensor at the end of the process to upsert (update) the row created by the sensor at the start of the process. The time difference between two fields in the same row is then an easy calculation on a BAM report -- No EL plan should be needed.

  • Open BAM.xla error

    My Biztalk environment follow:
    Win2008R2 SP1 + SQL2008R2 SP1 + Excel2010 + VS2012 + Biztalk2013
    when I open bam.xla , It repeat 10 times that appears some errors.
    "Could not load an object because it is not available on this machine."
    and then, I try to new one "BAM Activity".
    It appear debug window with in Microsoft Visual Basic for Application.
    But, I try replace original bam.xla with Biztalk2010 bam.xla.
    There is no errors now.
    Why?
    Is this a biztalk2013 bam.xla error?
    how can I fix it?
    Thanks a lot.
    K.D. Chen

    Thanks boatseller reply.
    How can I confirm Excel 2010 with 32-bit?
    I have a confuse. Why did I use biztalk 2010 bam.xla is work? 
    To use biztalk2013 bam.xla is fail.
    Since biztalk2010 bam.xla is work, may I say my environment is fine?
    Thanks a lot,
    K.D. Chen

  • BAM If Then Else or Switch function

    I have BAM data object called "Vehicle" which gets populated via messages coming in through from the enterprise message source. I have a requirement for a calculated field ArrivedStatusTime in the data object. In normal programming language I would just say where UnitStatus, StatusTime are other fields in the same data object.
    If(UnitStatus =="AD"){
    Then substitue value of field ArrivedStatusTime = StatusTime
    The same in BAM is difficult as it enforces the usage of else for which I have no use. Also there are no working examples of BAM function syntax for comparision of Strings (say a data object field UnitStatus =="AD) on the internet. Also my requirement is have the ArrivedStatusTime field should not be overwritten by other messages coming in with UnitStatus other than "AD"
    Please suggest, simple logic like this is hard to implement in BAM.
    Thanks

    Again, {} is only required when the field name has special characters in it. Otherwise, it can be used as it is.I adopted the use of braces {} as the best parctices and I highly recommend it.
    "Column names containing any special characters, such as the operators listed in Table 31-1 double quotation marks, or spaces, must be surrounded with curly braces {}. If column names contain only numbers, letters and underscores and begin with a letter or underscore they do not need curly braces. For example, if the column name is Sales+Costs, the correct way to enter this in a calculation is {Sales+Costs}."I've had cases - can not remember where it was - that the non use of curly braces in field names without special characters shown error messages. So, this intermittent result reiterates my recommendation.
    []s
    Luciano Gomes

Maybe you are looking for