Bank Login fails with Quicktime Plugin 7.6.6

My bank has a login ID page, after putting in my ID and clicking ok, it takes me to the password page. I input my password, click ok, and I go to my "home" page. If I click almost any link I am instantly transported back to password page. I can re-enter my password and progress to my home page. I click on any link and back to my password page. This goes on forever.
But, if I disable plug-ins, there is no problem. My bank refers to this as "The Safari 5 problem." They are working on it. I went ahead and loaded the plugins one at a time, which is tedious. It turns out that Quicktime Plugin 7.6.6 is the culprit. When I checked the Apple website, this plugin was shown as being for 10.5. Looking for a 10.6 download got me the message that I had 10.6, Quicktime was already installed, for older version support, go . . . .
So does anyone know for sure that there is no longer a Quicktime Plugin required, that the 7.6.6 version was (mistakenly) not deleted by the 10.6 upgrade?
Message was edited by: Mr Alexander

I doubt Quicktime has anything to do with it. Far more likely to be Flash or Javascript related.
Some banks are notoriously uncaring and lazy about what systems and browsers they support.
As it says in this document:
http://developer.apple.com/internet/safari/
"Safari complies with standards, but not all browsers do. This article explains how to design, modify and validate your website so that it can be rendered and read properly by all major browsers."
The bank/s need to read this:
"Safari is one of the most standards-compliant browsers ever built. Thus, your best bet for ensuring your pages render properly in Safari — today’s version and beyond — is to follow web standards. For a great overview of web standards, check out Mozilla.org’s article Using Web Standards in Your Web Pages."
https://developer.mozilla.org/en/UsingWeb_Standards_in_your_WebPages

Similar Messages

SessionBroker login fails with Oracle XA

Hi all,
I am trying to use oracle XA with sessionbroker.
I register the session with the session broker and when i try to login it gives
"No suitable driver" error.
Without using session broker, when I get the session, it is working fine.
sb = new SessionBroker();
Project p1 = new CfToplinkMapping();
DatabaseSession orc = p1.createDatabaseSession();
sb.registerSession(SESSION_NAME, orc);
sb.login(); ->>>>>>fails with no suitable driver error...
My project.java contains the following code: -
login.usePlatform(new oracle.toplink.internal.databaseaccess.OraclePlatform());
login.setDriverClassName("oracle.jdbc.xa.client.OracleXADataSource");
login.setConnectionString("jdbc:oracle:thin:@sch1h217:1521:fmstd");
login.setUserName("fms");
login.setEncryptedPassword("8B66EF2A66D659E33500D82AB9562809");
Please let me know where I went wrong. Is there any extra configurations required for XA drivers?

Hi. The issue is that an XA-aware connection can be used at a much finer granularity
than a non-XA connection. XA allows a connection to associate itself for one tx,
make one call, disassociate itself from the tx, and then do a call for another tx.
Therfore the XA connections in the pool may be involved in 1 or more tx's. If your
app is trying to do local tx's as well with these connections, some drivers/DBMSes
get confused.
You can either create a separate pool for non-XA use, or set the keep-connection-till
tx-complete setting for the XA pool. This latter setting will make sure that connections
that are idle in the pool are not associated with any ongoing XA tx.
Joe
Ramamoorthy wrote:
Guys,
I have a problem with JDBC calls with XA Connection Pool (DRIVER:::oracle.jdbc.xa.client.OracleXADataSource).
We are using the same connection pool for EJBs & JDBC calls. When we use JDBC
calls in between EJB calls, we are getting problems.
1) java.sql.SQLException: ORA-02044: transaction manager login denied: transaction
in progress
ORA-06512: at "SYS.JAVA_XA", line 0
ORA-06512: at line 1
at oracle.jdbc.dbaccess.DBError.throwSqlException(DBError.java:180)
2) SQL Exception:java.sql.SQLException: XA error: XAER_RMERR : A resource manager
error has occred in the transaction branch start() failed on resource 'XADBPool':
XAER_RMERR : A resource manager error has occured in the transaction branch oracle.jdbc.xa.OracleXAException...
When I changed the DataSource of JDBC calls from XA Connection Pool to Non-XA
connection poll thess errors disappears. I really don't understand the relation
between XA Connection Pool & JDBC calls. Even here my officemates are telling
we should use non-XA connection pool for JDBC. But nobody knows the exact issues..
Please help..
Thanks
Ramamoorthy.

Problem viewing AVI files with quicktime plugin

I have quicktime 7.6 and perian installed
When I try to stream an AVI file I can hear sound but no video is displayed
If I download the file and I then play it with quicktime everything is fine
If I remove perian then I will be able to stream from the website but of course unable to play MKV, Divx and Xvid files
I have removed all obsolete codecs and I am running out of ideas on what is wrong with the system

In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
However it should be noted that Perian is not an internet plugin and will not play DivX files imbedded on a website. For that you will need the DivX Player browser plugin available from
http://www.divx.com/divx/mac/

Can't reconnect to sync from work - firefox login fails with "Incorrect password" when I know it is correct

I can happily connect my home computers and phone to sync and I have confirmed they sync between themselves. However, my work computer has recently stopped being able to sync where it has previously been fine for well over a year. I am on the latest version of sync and Firefox 35.0.1 (both at home and work).
When I try to reconnect to sync I am directed to the "Sign in to continue" page. It has my correct email address/account name. I enter my password (clicking "Show" to make sure it's correct) but then it always fails with "Incorrect password" in a red banner at the top. I have checked the password is correct and logged out and back in from home using the same password so I know that is correct. I have tried this logged in to work via remote desktop so I could do both at the same time to make sure there isn't just a prevailing sync server problem.
Obviously my work computer is behind a proxy/firewall. I have recently had to add a new certificate as a result of proxy changes to get internet connectivity working. Anecdotally, I think sync stopped working at a similar time - but it's always easy to remember these things differently when you're looking for a solution. So this could be a red herring.
Your help in getting this fixed would be much appreciated!

Thanks for your reply.
i've deleted all cookies, although I don't really understand how that relates. I have also spoken to our sysadmin who says we don't block access to firefox accounts per se, we do block all file-esque uploads. However, I am not sure this would make any difference to the exact problem I am seeing which is that I can't sign in to my firefox sync account. But maybe signing in to this account is different to a "normal" account - maybe there is more of a two way handshake which relies on sending some encrypted data which appears to our proxy like a file being uploaded out of the company.
I got a slightly different error on my latest clear down and retry, in that the sign in just waited forever (overnight) without success.
Any further help gratefully received...

Problems with my online banking login and with sponsored links from google.

I'm getting an error such as
"Safari can’t open the page “https://home.ybonline.co.uk/ralu/loginmgr/loginSetup.ctl”. The error is: “unknown error” (kCFErrorDomainCFNetwork:303) Please choose Safari > Report Bugs to Apple, note the error number, and describe what you did before you saw this message."
This error occurs after I enter the security login code and click on "next", so nobody else can try it. However, I have a friend who uses the same banking system, and their Safari logs in fine.
I also get an error if I click on any of the sponsored ads on google.com - the ones at the top of the page, or down the left column:
"Safari can’t open the page.
Safari can’t open the page “http://www.google.co.uk/aclk?sa=l&ai=CB4mSUz5DSsHiPNiAjAfC54CZArHp95gBm6J4waDxeKsCggAEAEoA1CDr9bi-_____8BYLvGmoPQCqABg4HH_gPIAQGpAj8ptQTJlbs-qgQWT9CEfO TWNx_F8jlFL37uEIRGYIvrQ&sig=AGiWqtxzpQKj07KGtqZc7ozbMtYG3ll0sw&q=http://www.runningbare.co .uk/HOME/FITFLOPS/tabid/68/List/0/CategoryID/68/Level/a/Default.aspx%3FSortField %3DISBN,ProductName” because the page’s address isn’t valid."
All of these work fine in Firefox. Safari is Version 4.0.1 (5530.18).
Any ideas, please? - this is driving me crazy.

hi jodimaca, if the bank really cannot figure on their own that they need to update the encryption configuration on their server to something contemporary, this doesn't sound particularly worthy of trusting them with your financial data.
in particular they should provide support for TLS 1.1. and 1.2 and retire the RC4 cipher suite they seem to use exclusively - this is considered broken now and browser need to stop supporting it soon:
https://tools.ietf.org/html/rfc7465
https://www.ssllabs.com/ssltest/analyze.html?d=web9.secureinternetbank.com
specifically this change in firefox 37 will cause the secure connection to the site to fail and lead to the error message you are seeing: https://bugzilla.mozilla.org/show_bug.cgi?id=1084025
you might want to forward this information to your bank...

Tiff (or tif) file created in Photoshop is not displaying in Firefox 2 or 3 with Quicktime plugin

I embedded a tiff file that was created in Photoshop but it is not displaying in Quicktime/Firefox.
It works in other browsers but not Firefox 2 or 3. And another point is that if the Tiff file is created in any other graphics application then it works!
It leads me to think that Photoshop might be adding some metadata to the file that Quicktime/Firefox is not liking.
Any ideas on what might fix this?

There are different types of TIF files with different kinds of contents (compression schemes, channels, bit depths, etc). It is no surprise that you might get different results with different browsers/plugins.
What kind of TIFF are you using? Why are you not using a more standard web image format that does not require the overhead and hassle of an optional plugin?

Jabber for Windows Login failed with - "Must change at Next Login" for CUCM Authentication

Jabber for Windows users cannot login when "User Must Change at Next Login" is selected in the CUCM credential Policy
I found this Bug-ID: CSCuh84476
https://tools.cisco.com/bugsearch/bug/CSCuh84476
We use Jabber for Windows 9.7.4!
I just want to know if there are other users have the same problem and which workaround they applied.
I’m currently testing a User with different Policy credentials (Credentials expire after 1 day).
I think this will also lead to a “username or password wrong”-popup but tomorrow I will see it myself ;)
The planed workaround for us will be to set the “User Must Change at Next Login ” option and the users first have to login at UCM-Userpage to change their initial password.
BTW: Maybe somebody from Cisco know when this get fixed?
Best regards
Franz

J4W does rely very heavily on DNS, you should at least all required entries to hosts and lmhosts.
How are your servers defined under system -> server??
Are you able to log into UCMuser page??
Have you properly configured all user/device/line association, and created the necessary service profiles???

Calendar server and address book server login fails with outlook connector

Hi all,
I have installed Java Communication Suite 5 according to the doc http://blogs.sun.com/factotum/resource/comms5-install-linux.html.
When i deploy the connector i get the pop ups saying "Server:servername:3080
Error:service not available" also
"Server:servername:80/uwc"
Error:service not available"
asking to login to calendar server and address book server.Clicking "OK" allows install.
In outlook i can send and receive mails but not the meeting requests.It gives the error "login to calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of the error.The username and passwd entered is correct.
Regards,
lmeenakshy

Hi,
When i deploy the connector i get the pop ups saying
"Server:servername:3080
Error:service not available" also Do you get exactly what you say above, or have you substituted in the real server name for "Server:servername:" above?
I would check through the outlook connector deployment configuration to verify that you have inserted valid information into all of the host & port fields - perhaps check the .ini file that is created to see if it has "Server" and "servername" listed.
"Server:servername:80/uwc"
Error:service not available"You are able to log into UWC via the web-interface and access your calendar/pab and edit/modify/delete calendar & addressbook entries right? The services are all up?
asking to login to calendar server and address book
server.Clicking "OK" allows install.The outlook connector deployment software gives you the option to increase the logging level, try that and see what the logs say - what was it trying to connect to/check which failed.
In outlook i can send and receive mails but not the
meeting requests.It gives the error "login to
calendar server" when i create a meeting request.
Please let me know what i have to do to get rid of
the error.The username and passwd entered is
correct.I suspect this is more of an underlying configuration issue that needs to be sorted out, once that happens you shouldn't have to keep logging in.
Regards,
Shane.

6.1 SP 2 certificate authenticator fails with Apache plugin and SSL

Hi,
Does anybody have a certificate authenticator working in WebLogic 6.1
SP 2, in combination with the Apache HTTP Server plugin and SSL?
We implemented a certificate authenticator that works correctly in
WebLogic 6.1 SP 2 when we configure SSL with "Client Certificate
Required", and access it directly from a browser (the browser hits the
SSL port of the WebLogic server, like 7002).
This certificate authenticator also works correctly with a proxy web
server. We set up a Stronghold server (web server based on Apache) on
Linux with the Apache HTTP Server plugin from BEA, configured the
plugin to use SSL, and configured our WebLogic 6.1 SP 1 server without
"Client Certificate Required". The certificate authenticator gets the
end user's certificate correctly.
This same architecture with the proxy web server does not work when we
upgrade the WebLogic Server to SP 2. WebLogic Server logs the
"incorrect or missing client cert" error, our certificate
authenticator is never called, and the browser gets a 401 Unauthorized
error.
We looked all over the WebLogic 6.1 SP 2 installation for a newer
version of the plugin (mod_wl_ssl.so) and found the same version as SP
1. We double-checked that it was the Linux-specific installer
(because we'd found that some Linux libraries are missing from the
generic installer). So it appears to us that the plugin encodes the
certificate in the request header in such a way that a SP 1 server can
extract it, but an SP 2 server cannot. We were wondering whether
there might be changes to the plugin to stay in step with the SP 2
server that never got ported to Linux, or whether an updated Linux
plugin never got included in the installer packages.
So: has anybody gotten a system like
Apache/Stronghold + WebLogic Plugin <-- SSL --> WebLogic 6.1 SP 2 +
Cert Auth
to work?
Thanks in advance for any help,
Jim Doyle
[email protected]

A correction, I think:
Now that I rolled back a system to 6.1 SP 1, it looks like 6.1 SP 1
does include a different mod_wl_ssl.so from that in SP 2. I believe I
was comparing the wrong file. In fact, trying to compare versions of
the mod_wl_ssl.so makes things rather confusing:
A mod_wl_ssl.so from a straight weblogic610sp2_generic.zip install has
a cksum of "1853014778 1132467".
A mod_wl_ssl.so from a weblogic610sp1_generic.zip install with a
subsequent SP 2 upgrade install has a cksum of "1350917183 1147927".
A mod_wl_ssl.so from a plain 6.1 install with subsequent SP 1 and SP 2
upgrade installs, followed by an SP 2 uninstall and another SP 1
upgrade install, has a cksum of "1471948065 1136501".
I think I may be looking at three different plugin versions here: 6.1,
6.1 SP 1, and 6.1 SP 2, assuming the upgrade installs don't actually
change mod_wl_ssl.so. I'm not sure whether there's an easier way to
verify what version of the plugin you have.
In any case, we did try each plugin version, and none of them works
against a 6.1 SP 2 WebLogic server.
Jim
[email protected] (Jim Doyle) wrote in message news:<[email protected]>...
[snip]
We looked all over the WebLogic 6.1 SP 2 installation for a newer
version of the plugin (mod_wl_ssl.so) and found the same version as SP
1. We double-checked that it was the Linux-specific installer
(because we'd found that some Linux libraries are missing from the
generic installer). [snip]

Final Cut Pro X share fails with QuickTime Error -50

Hello!
I'm facing a very annoying issue when trying to share my project from Final Cut Pro X. It used to work perfectly fine but now I'm getting consistently "QuickTime Error -50" after FCPX exported about 10% of my project. This can be reproduced with other project as well - one time I was able to export by restarting my machine but not anymore.
My configuration is a Mac Pro early 2008 with a ATI Radeon 5770. The only recent change I did to my config was to upgrade my old graphic cards to the Radeon 5770: do you think this can be the cause of this error?
Thanks for any help,
Jean

I am also expriencing the same error. Tried every solution listed so far:
1. Switch off background rendering. Trash render files. Don't render. Export.
2. copying the project within Final Cut Pro into another project
3. remove the following folder: Library > Application Support > ProApps > MIO > RADPlugins > XDCAMFormat.RADPlug
Nothing worked. I try to export to Vimeo, YouTube, and master. All error right at 9%
What's going on?

Epson printer fails with Quicktime

Hi All,
I have found that my Epson Stylus NX115 printer crashes and will not print while Quicktime is installed. I had this issue on WinXP and upgrading from Qucktime 7.60 to 7.64 fixed the issue. On Vista it has not. I have friends with other models of Epson printers that are having the same issue.
When Quicktime is installed and I try to print, Windows Vista tells me via a popup:
"Spooler SubSystem App has stopped working".
I set my laptop back to factory reset and installed only Quicktime (7.64) and my Epson printer. No change of outcome. I've uninstalled Quicktime and the printer at least 10 times now. It's completely consistent, if Quicktime is installed the printer doesn't work, if it's not then the printer does work.
I've tried to use Process Monitor to figure out what Quicktime might be doing. I've set the QT.exe not to start up with Windows. I've tried changing a lot of attributes on the printer but nothing has worked. It seems to have to do with a change that Quicktime makes at install time. The uninstall of Quicktime fixes whatever it did.
If you have any ideas on a next step please let me know.
Thanks!
nablaodel

Open System Preferences and select Sharing
If the computer name listed at the top of the window is empty type one in.
Restart
Try printing again

CCP2014 pkg installer fails with InCopy Plugins

Hi Adobe and other readers,
I've made a Creative Cloud Packager (CCP) package to install all current CC apps and updates, with the exception of Acrobat Pro. This builds and outputs a pkg as expected.
When the pkg is installed on a test machine, it fails. In /Library/Logs/Adobe/Installers, the most recently updated log is Adobe InDesign CC 2014 10.0 <datestamp>.log.
Auditing this log, I see the first failure recorded is:
10/07/14 19:35:07:861 | [ERROR] | | OOBE | DE | | | | 63746 | DS015: Unable to read symlink target of source file "/Volumes/VMware Shared Folders/SeagateUSB3/Adobe CC 2014-all but Acrobat/Build/Adobe CC 2014-all but Acrobat_Install.pkg/Contents/Resources//Setup/IDSN10.0en_US/payloads/AdobeInDesign10AppBa se-mul/OEM_/Adobe InDesign CC 2014/Plug-Ins/InCopyWorkFlow/Assignment UI.InDesignPlugin/Assignment UI"(Seq 11962)
When I manually dig into the installer pkg and follow that path, I find that Assignment UI is a symlink, but the destination it points to cannot be found. Exploring other sections of the InCopyWorkFlow/*.InDesignPlugin subfolders show each has 2 symlinks: one that matches the name of the parent folder, and a Resources symlink. All of these are broken- they do not link to a source file.
Can Adobe provide guidance regarding how to address this error, and produce CCP pkg output that does not fail due to invalid symlinks?

I've found a little more about this: looking at the source pkg on the build machine, the above quoted simlinks are valid. They are not valid when the pkg was transferred to the destination machine. There is some aspect of moving them to other storage that is breaking the links...

Latest SO Patch for Linux (120184-14) fails with postgresql plugin

Hi,
the latest staroffice patch for Linux no longer works with the postgresql extension postgresql-sdbc-0.7.5. It can read tables but will not write back any modifications. The failure message is something about some routine not being implemented. I'm afraid I needed it in a hurry, so I reverted to the previous patch (120184-12).
My system is opensuse 10.3 running on an x86/64-it machine. uname -a gives
Linux hostname 2.6.22.17-0.1-default #1 SMP 2008/02/10 20:01:04 UTC x86_64 x86_64 x86_64 GNU/Linux
Does any body know of another convenient way of hooking SO up to postgresql?
Regards,
Charles

Hi dcminter,
your right, sorry, this isn't a Java question. I followed a link from Suns StarOffice page and assumed this was a purely SO forum. I've just noticed the tabs on the forum window. There is a separate section for 'desktop'. I'll repost there.
Regards,
Charles

Safari, view movies with QuickTime problems

Problem with quicktime plugin in safari.
Safari dont play movies.

Thanks for the link to the film adaptation of Pullman's 'Northern Lights' trilogy - looks promising!
Sorry, back to the problem at hand:
These are the downloads and the settings you need in order to view/hear pretty much everything that the net can throw at you: The setup described below has proved repeatedly successful on both PPC and Intel macs, but nothing in life carries a guarantee!
Assuming you already run OS 10.4.9 or above (but this has not been verified with Leopard) and have Quicktime 7.2, and are using Safari 2 or 3, download and install (or re-install even if you already had them) the latest versions, suitable for your flavor of Mac, of:
RealPlayer 10 for Mac from http://forms.real.com/real/player/blackjack.html?platform2=Mac%20OS%20X&product= RealPlayer%2010&proc=g3&lang=&show_list=0&src=macjack
Flip4Mac WMV Player from http://www.microsoft.com/windows/windowsmedia/player/wmcomponents.mspx (Windows Media Player for the Mac is no longer supported, even by Microsoft)
Perian from http://perian.org/
Adobe FlashPlayer from http://www.adobe.com/shockwave/download/download.cgi?P1ProdVersion=ShockwaveFlash
In Quicktime Preferences, under advanced, UNcheck Enable Flash, and under Mime settings/Miscellananeous only check Quicktime HTML (QHTM).
In Macintosh HD/Library/Quicktime/ delete any files relating to DivX (Perian already has them).
Important: Now repair permissions and restart.
The world should now be your oyster!
You should also have the free VLC Player from http://www.videolan.org/ in your armory, as this plays almost anything that DVD Player might not.

Quicktime Plugin Issue in Safari on Mac OSX Lion.

(Strange) Safari - Quicktime - issue on Mac OSX Lion (All Updates done - 20/11/2011)
Strange issue with Safari - Quicktime video playing - on Mac OSX Lion (All updates done till 20th Nov 2011 night)
Problem discovery: Tried to view the Apple iPhone 4S Keynote on Apple Website. Strange that Safari does not display any videos from Apple Website.
Following works OK:- You Tube worked fine.
- Google Chrome worked fine. (It shows the quick time player loading and then displays the video absolutely fine.)
Conclusion: There is some problem with Safari Quicktime Plug-in.
Strange Discovery:
- There are two users on the MAC. Logged in with a general user (Non Admin)
- When tried to view Apple Videos on Safary ... THEY WORKED FINE !!!
- The user where they donot work is an ADMIN User ... Strange !!!
System:
- Mac-Mini 2010 - 8 GB RAM - with OSX Lion fully software updated until 20th Nov 2011 night.
- DIVX is installed and is also a paid version - registered with DIVX website.
- VLC is installed.
- Perian was installed - after problem discovery - uninstalled it - no use.
Please help with a solution if anyone has faced and solved this problem. Sub question is : If DIVX / anyother plug-in causes problems with QuickTime plugin on Safari, why does it affect only one user on the system and not other users on that system ?
Notes:
1) There is a similar looking thread on MacRumors here but concluded that required to start a seperate one with clear problem statement.
2) Apple Forums
(a) One thread on topic that hints that some 3IVX plug-in can cause issues with Safari Quicktime Plugin: here
(b) Another thread from Apple Forum, that hints that DIVX causes problems to Safari Quicktime Plug in, Link is Here

Refer to a thread on Apple Discussions Forum itself, Link is HERE; refer to the posting by "Charles Cole",
Charles Cole
Re: Does anyone recommend OS X Lion?
Aug 2, 2011 8:09 PM (in response to Landrix)
Charles writes about DIVX and QuickTime Plugin conflict in Safari:
One thing I've discovered that might help anyone having a Quicktime Plug-in issue. If you have DivX as a codec on your system (usually installed to play .avi files) you'll want to uninstall it so that Sarfari 5.1 will default to the Quicktime Plug-In and not the DivX plug-in. Otherwise, you can't see Quicktime movies in Safari.
Note: this post is about and at the time of OSX Lions launch, i.e. 10.7.0.
Now we have 10.7.2, still cannot believe Apple has not fixed this bug !!!

Bank Login fails with Quicktime Plugin 7.6.6

Similar Messages

Maybe you are looking for