Bank name change in manual posting

Dear Gurus,
Name of the Bank is showing Wrongly in FF67 overview. Manual Posting has been done for this also.
How can i change the Name.
Regards,
Rohit Raj...

Dear Krishna Reddy...
Actually My Problem, is When i created the House Bank. The Address of the House Bank will not get copied to that TR. Hence I requested the User to Enter the Address from His Side in the Testing Client.
He Entered it wrongly, The Posting has been done. When he realised in FF67 overview it showing the Wrong Name.
I Tried to update the Correct Name in FI12, But system is not updating in the FF67.
I hope it is Clear Know...
Thanks for your Valuable Suggestions. It helped me lot.. I did marked your suggestion has helpful.
Regards,
Rohit...

Similar Messages

Problem when change bank clearing account for payment posting.

We recently changed the bank clearing account for payment posting (program PC00_M99_PPM). But I found out because the config can only be changed but not delimited on payroll side, the program errored out when it retro back for an employee to the old clearing account. So what am I supposed to do to fix this problem?
Have anyone ever handled this problem before and could please throw some light on it?
Thanks in advance.
Johnson

hi
check following
1. Check in OMWD, whether Valuation grouping code "0001" ia ssigned to Ur plant
2. OBYC - If you have assigned GR/IR Clearing A/c to WRX then check whether you have maintained it with combination of valuation class and GL A/c
If yes then maintain only GL A/c w/o valuation class OR maintain one entry with valuation class empty and GL A/c
check following
Error in service entry sheet
Re: Error in ML81N
http://sap.ittoolbox.com/groups/technical-functional/sap-acct/grir-clearing-account-wrx-doesnt-recover-gl-account-2224137?cv=expanded
http://sap.ittoolbox.com/groups/technical-functional/sap-log-ps/problem-while-posting-service-entrysheet-in-ecc-60-version-1483547?cv=expanded#
regards
kunal

Mass change in fk02-payment transaction-bank name

Dear All :
i want to do mass changes in fk02 - payment transaction tab - bank data tab - bank name field
table name is BNKA , field name is BANKA
Please suggest t code for same
vijay

As far as i know the Bank name field is non editable and it flows from Bank key which means the name is bank key specific...so you have to change the bank name of the Bank key...for this i think LSMW or BAPI needs to be created for the Bank key change transaction code FI02.
Regards,
Indranil

FF67 - Manual bank statement 'not to be posted' error

Hi all,
I am using ff67 to view my manual bank statements but there is an amount with the status 'Not to be Posted'.
I go into FEBAN to find more information and this document is set as 'incomplete' (yellow status). Can someone explain to me why this is happening and how to fix this?
Thanks,

Thank you for the response Atif,
My question is: why was the wrong clearing entry originally posted?
Because of this clearing entry, it looks like we now have an open item in the incoming account. When looking at the incoming/master accounts, after the manual posting has been made, we have an open item in the incoming account which cannot be cleared.
Example
Incoming a/c = -8000 <- this line is open
Master a/c = 8000
What is the way to proceed? thanks,

Change of Bank Name

Hello Gurus,
A bank name has been changed. Can you guys suggest, where all I have to make changes in the bank name in SAP ECC6.0
Regards,
VK

Dear:
Just go to FI02 and change the Bank name given there. In FI12 change the description of main account which has been assigned to the bank key you created in FI01. In FS00 change the description of GLs master data for Current A/C, Incoming A/c & Outgoing A/c. e.t.c . Revert back in case of any confusion.
Regards

Reverse the bank name in F-29

Hi Friends,
While posting customer down payment using F-29 , i have entered wrong bank entries & wrong customer name. so how i can
change the bank name & customer name .
Regards,
Sanjeev

hi Sanjeev ,
You can't change bank name and Customer.You have to reverse the existing doc and post the new one to get the correct enteries.
You can only edit assignment and text fields.
Regards
Deepa

Saving/exporting issue in Windows 7-file name changes when trying to navigate

I just got Windows 7 on my computer and am running ID CS5. The weirdest problem happens when I try to save as or export a file. The dialog box comes up and normally, I would be able to select a folder I want to navigate to just by typing the folder name, but what is happening is that the first letter goes to a folder, but upon typing the second letter, it starts changing the name of my file.
So for example, I am saving a file ABC.indd and I go to navigate to save it in a folder called Project XYZ. When I type in "P" to get to that folder name, it jumps right to the first folder starting with P. However, upon typing "r" my file name changes from ABC.indd to "r.indd." If I kept typing, it would become "roject XYZ.PDF."
This happens when saving as a file or if I am exporting a PDF. Our entire marketing department or 6 people was recently upgraded from XP to 7 and we all have this problem in ID. This does not happen in Illustrator or Photoshop and it has our IT department baffled. It is driving us crazy though because we make dozens of files a day and now have to manually scroll through long file structures when exporting PDFs, which is so time consuming, not to mention aggravating.
In searching for this problem, I found another poster on a different website who has the same issue, but no one had any suggestions.

Tell whomever is emailing the file to zip it first.

How to change the manual condition type value in change sales order BAPI

Hi All,
My scenario here is, i want to either add/change the manual condition type value during change of SO.
When i'm trying to pass the order_conditions_in and order_conditions_inx tables in 'BAPI_SALESORDER_CHANGE'.
Condition type is coming at item level but the value is setting to zero. Pls. help if anyone has any idea how to handle this.

Siva,
I guess you posted in Wrong Thread. You need to post in WAS section.
check for any BAPI's available in CRM.
Nagesh Ganisetti.

Outlook does not connect to Exchange 2013 after name change due to marriage

When launching Outlook and clicking through the setup wizard to create a new profile, Outlook auto-discovers the correct email alias. When establishing a connection it successfully checks network connectivity and successfully searches the email settings.
When it attempts to logon to the mail server the error comes up.
"The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
Clicking "Check Name" gives the error:
"The name cannot be resolved. The connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete this action."
The same result occurs with a manual setup.
We are running Exchange Server 2013. User workstations are running Outlook 2013 on Windows 7 Pro. All updates have been applied as of March 31, 2015.
All name changes have been made in AD and Exchange. Old aliases and new aliases are set in Exchange. Offline Address books are updated daily. The local profile and registry settings have been updated on the workstation and the user is successfully logging
into the profile. The issue is only with Outlook 2013. User can access mail through OWA and ActiveSync on their mobile device.
Logging the user into another workstation and running the wizard returns the same results, which rules out the possible problem being with the workstation.

Hi,
According to your description, I understand that failed auto-configure Outlook with error “The name cannot be resolved. The connection to Microsoft Exchange is unavailable…”, however OWA works fine.
If I misunderstand your concern, please do not hesitate to let me know.
Are all account or any special user experience this question?
If OWA works fine, it indicate that the mailbox database is mounted, and mailbox works well.
I notice that you have changed the account name before issue arise, because external access, the client locates the Autodiscover service on the Internet by using the primary SMTP domain address from the user's email address.
More details about Autodiscover service, for your reference:
https://technet.microsoft.com/en-us/library/bb124251.aspx?f=255&MSPPError=-2147217396
Please try below command to force update address list, GAL, OAB, then test again:
Get-AddressList | update-AddressList
Get-GlobalAddressList | update-GlobalAdressList
Get-OfflineAddressBook | Update-OfflineAddressBook
If the issue persists, please wait for some time to complete configuration.
Thanks
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Allen Wang
TechNet Community Support

Vendor bank name in Payment Means

Dear ALL
I just want to have one clarification...
the Bank name which we are defining in payment means for incoming payments,whether its vendor's bank name or company's bank name....
Kindly clarify on this...
Edited by: kaleeswaran.T on Jun 15, 2011 1:13 PM
Edited by: kaleeswaran.T on Jun 15, 2011 1:14 PM

Hi,
Your first posting is misleading because you use Vendor instead of Customer.
For your question, the Incoming payment always needs your company bank name and account information to deposit customer check.
Thanks,
Gordon

When downloading files the file name changes name?

When I download files from yahoo email account the file name changes from actual name to securedownlad.doc. Why is this happening and how do I stop it? Is it an email client issue?
Example:
Original file name in email to download is called GeorgiaTechstinks.doc
when downloaded the dl box pops up and file name has changed to securedownload.doc.
I have to go and manually change file name back to GeorgiaTechstinks.doc
any help would be greatly appreciated

See here for information.
(24629)

Photoshop Elements 3.0 Back-Up - File Name Change

I currently run Photoshop Elements 3.0. When I back-up the catalog from within Photoshop, the file names are changed (i.e 100_2424.JPG to BO00012). All of my Premiere Elements 7 projects point to the original file name. If I ever lost that original JPG file, the back-up file would be recovered, but would not be recognized by Premeiere Elements, and thus not be found. Why does the file name change after back-up? How can I retain the original file name during back-up? Thanks.

Once you have taken the backup, all the files are renamed as you mentioned in the post. Its only when you restore the catalog through File->Restore, the files are restored by the original name.

Column name changed in reports

I have to do some changes on my existing report, its really a complex report with more number of columns and tables. now its really hard to fix the alias name changed by report builder automatically. any one could help me to fix this problem, means what i have alias name in query that i want to use in report.

Hi,
Could you pl clarify the Q? Do you mean that Reports Buider has automatically added an alias to a column name? This is not expected.
Or do you mean that you need to change the alias of the column without disturbing the report definition? You can alter the data model of the report using the feature "Customization at runtime using XML". For more information, refer to Chapter 16 in Publishing Reports Manual for 10g:
http://www.oracle.com/technology/documentation/reports.html
Navneet.

AD Security Group name change not showing in Sharepoint 2010

Hi!
We have a Sharepoint 2010 Standard enviroment and are heading for a role-based identity-managment in our company. That's why we find it better to use AD Groups instead of Sharepoint Groups.
So we have over 1000 AD Security Groups groups that have been added to our Sharepoint Sites and our goal is to control every permission in Sharepoint from AD.
I have done all this with the combination of Excel and Powershell and it have worked great.
The problem i see in the long run is the name change of AD Security Groups. Sharepoint 2010 isn't showing the new name of the group.
Does anyone know of any workaround that can solve this problem. It's a bit of a disappointment that Microsoft haven't fixed this. The only information i think they should store in Sharepoint is the SID of the groups.
I was thinking of designing a powershell script that runs every night and updates the display name of the groups that do not match the AD display name.
Is there any other way?

As far as I know, and I'm not sure where to go from here without testing on my own...and I'm not sure when I'll be able to do that. Perhaps a configuration issue.
Have you tried removing the incorrectly named group and adding in the correctly named one?
Read through this related post:
http://social.msdn.microsoft.com/Forums/en-US/sharepoint2010general/thread/49dc833f-4127-45ac-bd21-98b04d3632ef
Looks like that can help you. Let us know how things go.
Colorless Green Ideas Sleep Furiously http://www.sharepointnerd.com

Authentication popups after computer name changed to computer record name

Hi
I'm not sure if anyone else is facing this issue, but I have been unable to find anything in the forums.
I have setup a number of client machines on Lion Server, all using 10.7.4. I used WGM and Remote Desktop to make some changes and deploy software
Since then, I have been getting the following authentication popup on all client machines (twice after login, and then every 30 mins or so afterwards):
Mac OS S wants to make changes. Type an administrator's name and password to allow this.
The changes made prior to this happening were:
- Overplay VPN installed (using RD pkg install)
- Adobe CS 5.5 installed (using Adobe Enterprise Deployment Tool and RD package install)
- Evernote installed (using RD copy)
- Set computer name to computer record name (From WGM > Computer Groups > Preferences > Options)
I have now removed all the installed software from one machine, and log in as administrator, unbind the machine, rename the computer manually to the record name, rebind the computer.
As far as I can see, I have reverted all changes one at a time, and am still receiving the admin password requests when logged in as a network user.
The only machine that seems to be ok, is the one where the name change to computer record name was unsuccessful.
Does anyone have any suggestions as to how I can fix this issue?
Thanks
Suraj

Issue resolved. It turns out none of my changes caused the issue as much as Google Chrome Autoupdates. The new version constantly checks for updates which makes clients on Lion Server go haywire. Solution to turn off auto-updating:
Open a Terminal window:
defaults write com.google.Keystone.Agent checkInterval 0
Relaunch Chrome.

Bank name change in manual posting

Similar Messages

Maybe you are looking for