Bank statement - Deleted automatically

Hi All,
When we executed FF67,& selected overview button, selected co.code which the bank statment was deleted.
we double click the co.code, status shows Elec:deletion ID set.
we executed FEBA the date which statment was delted, getting blank.
Please let us know how we can come out this problem?
Thanks
Ram

Hi Sridhar M,
By right, after you run the program there should be no more deleted bank statement being displayed. Make sure you get the right ID from FEBA and be careful that you only delete one statement and not all.
Hope this help.
Thank you.
Regards,
Nazrul

Similar Messages

  • Manual bank statement and Automatic bank statement

    hello,
           i dont how to configure manual bank statement and Automatic bank statement. if anybody can provde information or  material or weblinks  it would be helpful to me to configure.
    regards
    santhosh

    Manual Bank Statement:
    Go to SPRO --> Financial Accounting (New) --> Bank Accounting --> Bank Accounts --> Business Transactions --> Payment Transactions --> Manual Bank Statement --> Define Posting Keys and Posting Rules for Manual Bank Statement
    After wards go for Create and Assign Business Transactions (in same path)

  • Bank statement delete

    Hi,
    if we delete bank statements usinf program RFEBKA96, which table does it gets deleted from..?
    when i check FEBEP, I can see that documents are posted against this statement no.
    so deleting bank statement, does it have any impacts on documents posted ..?
    Also if we run RFEBKA00 (FF.5) , which tables gets loaded and what exactly gets processed..?
    thanks
    Neha

    Hi Neha,
    It delete the bank statement and don't do any thing with the posting that where created with that bank statement!
    Only when you are know for 100% that there are no posting you can use this program. Other wise you have to complete them manual.
    Normal you use the deletion program only in the development system when you are doing tests

  • Is there a way to automatically clear GLs against a lump sum bank statement

    Good day, everyone.
    I would like to ask if  there is anyone aware of a a process that can help resolve the following.
    Currently, whenever we execute an EFT payment run through f110, SAP knows to credit the relevant GL account. If, for example, there are 20 vendors in the run, SAP will post to the GL lines for each vendor. However, the bank statement we recieve is only in lump sum. Thus, when we upload the bank statement into SAP, only the lump sum amount is reflected in the GL, and if we want to clear it, we do so manually through F-03 for each Vendor account.
    While this is technically not wrong, it can be inefficient and time consuming if there are too many vendors in a particular run. I would like to know if there is a way to streamline this process by making it run automatically. Is there a way we can make it so that the system will know what to clear automatically, once the bank statement is uploaded?
    Your feedback will be greatly appreciated. Thank you! I hope you have a great day!
    Regards,
    Jonathan Concepcion

    Hi, Marssel
    Thank you for your response. We'll test  it once the opportunity arises and will let you know if it helped us
    Hi, Shanumonu
    Thank you for the link. We've read it before, and we would also like to try it out. However, we aren't familiar with using algorithms. May we ask if you are familiar with the step by step process of carrying it out from payment run up to the clearing process?
    Thank you! I hope you have a great day!
    Regards,
    Jonathan Concepcion

  • Automatic Clearing & Electronic Bank Statement

    Hi,
    During EBS processing, open items are automatically being cleared but only based on amounts. I've configure in OB74 that criteria for clearing should be amount & value date.  It seems that EBS does not read the settings in OB74? Where is the correct path to set this up?
    Does EBS really allows upload of bank statement even if ending and beginning balance are not equal? Is there a way to control this?
    Thanks,
    Chaikaru

    Hi Chaikaru,
    OB74 is not the path for EBP processing. OB74 is used for account clearing in F.13 or F13E.
    You need to go to the path:-
    SPRO > Financial Accounting (New) > Bank Accounting > Business Transactions > Payment Transactions > Electronic Bank Statement
    You need to define interpretation algoritham. Please go through the below one:-
    OSS Note 494777 - Customer enhancements in electronic bank statement
    OSS Note 597428 - El.accnt statement: Customer-specific interpret.algorithms
    OSS Note 549277 - FAQ: Electronic account statement
    OSS Note 414233 - Accnt statement:customer-specific interpretation algorithms
    Regards,
    Gaurav

  • Automatic Import of Electronic Bank Statements (EBS)

    Hi SAP Gurus,
    We want to solve the following issue:
    Daily we receive multiple Electronic Bank Statements by means of banking Communication Software (BCS).
    Those EBS files are stored on our SAP Application Server, filetype = SWIFT MT940 format,
    and the file name contains a date and time stamp.
    File name example: MT940.90910077527_20101124_210421_167660
    Currently the import of these EBS-files is done manually via transaction FF_5 (program: RFEBKA00).
    We want to automate this import process.
    Every time a new EBS-files arrives (in a specific directory) on the application sever
    a signal (including the filename) should be send to SAP, so SAP knows there is a new EBS-file available for import.
    SAP now runs program RFEBKA00, with the provide filename, in the background.  
    Any ideas how to do this?
    Some tech. info:
    Windows Server 2003 R2 SP2 64-bit
    Oracle 10.2.0.4
    SAP R/3 Enterprise 47x200  
    Thanks,
    Roger Vanaubel

    Hi
    I think there are several ways to do it. In our case, we have a program which concatenates all received files into a single file and which launches RFEBKA00. It runs at fixed time, outside the working hours of accounting clerks. It is possible to trigger the program at file receipt, but there are problems if somebody is working in FEBA at the same time RFEBKA00 is working on the same bank account: then RFEBKA00 stops without doing all postings.
    If you trigger RFEBKA00 at file receipt, you may have several jobs running in parallel, and if 2 bank statements received in separate files are for the same account, you will have the same problem.

  • Automatic bank reconciliation with Electronic bank statement

    Deal All,
    As mentioned in the subject of this mail, this is to request for your inputs to advice the configuration steps with process for Configuration of Electronic Bank Statment in R3 to eneble the user for automatic bank reconciliation with clearing customer/vendor open items.Please send confi doc.
    Request you to provide documentation if possible along with your valuble advices.
    cvs

    Hi
    I implemented the EBS in my company 4 month ago and here are some advises on the problems i experienced in the setup process. As for the setup process it is straightforward just read the manual at help.sap.com.
    We used the MT940 format for importing bank statements from our bank.
    The first thing i would advice you to do is make a list of all the possible transactions that are to be handled by the EBS application.
    Then make estimation of how many payments that are recieved in constant structured way which the EBS can handle. (invoice number in the text)
    The people in our accounting department complained alot about the output format in the EBS not being userfreindly compared to the advises they recieved in e-mail form from the bank so if not the bulk of your payments can be processed automatically it might not be worth the trouble to implement it. (i still think they uses the the email to postprocess the transactions that was not automatically cleraed)
    Make sure you havent got any other applications handling some of the transactions that are contained in the bank statement because this wont work. eg. we had a program automatically placing fx trades on customer and bank account which meant that when we recieved the fx trade on the statement it was already placed and therefore had to be placed on a interims account for later reversal.
    We get alot of bankcharges on our payments and we set up the EBS to place them automatically on a bankcharge account if the difference between the recieved amount on the invoice was less that 30 dollars.(we just assume that a difference is a bank charge) This means that a customer if he wants to always can pay x dollars under the invoice amount because it will be automatically processed and therefore go unnoticed.
    Establish a contact in your bank who knows how their MT940 format has been structured. 
    Then contact your bank and get them to provide some test statements of old bank statements.
    Make sure that you are not the first customer for using the MT940 format or else you will end up being ginny pig for the banks possible mistakes.
    As i learned the way banks interpret the MT940 format guidelines can varry quite alot eg. the ocmt field our bank interpreted as the original payed amount in its original currency. SAP inprets this field as the recieved amount in its original currency and therefore it always try to clear the OCMT amount if availleble which meant it always tried to clear the original amount even though there had been taken som bankcharges underways.
    I also found out that our bank didnt really bother to specify the type of transaction (interest, fx contract, bank charges, check and so on) which meant we only had two external transaction codes availleble s103 for incomming payments and ntrf for outgoing payments. This gave alot of trouble as i had to identify the type of transaction through seach algorithms.
    Our bank also had trouble creating the MT940 file because it has a limited number of characters availleble which meant in the initial file that it only gave the first x characters of each line and then left out the rest. This meant that the text was broken into alot of pieces and you hardly ever had a complete invoice number to clear on. We had the bank altering their format so they now leave out text at the end of the transaction instead.
    In the implementation process we experienced that the EBS application created a payment advice each time the amount of the payment didnt match the invoice in the system. We implemented a note from service.sap which disabled this and just assigned the difference to a bankcharge account.
    I dont know if you can use these advices but just felt i would try to warn you about the potential problems that i experienced in the process. .
    If you have concrete questions to the EBS setup feel free to contact me and i will see if i can help you.

  • Electronic Bank Statement - automatic clearing via Assignment number

    Dear all,
    when posting our outgoing cheques, the cheque number is copied to the assignment field (via an automatic job). Our cheque numbers have 6 digits.
    When we are getting in the bank statement file  the cheque number is populated in the 'Note to payee' (same number in "Reference" field), but instead of 6 digits, the bank adds additional 6 digits / zeros infront of the cheque number. Meaning that instead of 005217 we get 000000005217.
    We want to use the automatic clearing with the link between 'Note to payee' and 'Assignment field'.
    The following settings were done in the system:
    1. Posting rules: "4 Clear debit G/L acct"
    2. Search string definition:
    1. 0 > ' ', 2. 0 > ' ', 3. 0 > ' ', 4. 0 > ' ', 5. 0 > ' ', 6. 0 > ' ', 7. # > #, 8. # > #, 9. # > #, 10. # > #, 11. # > #, 12. # > #
    3. Search string use:
    - Algorithm 015: Clearing Transaction: Selection Using Assignment
    - Target field: Payment Notes
    With those settings the system does not find the items to clear.
    Does anybody know what is missing?
    Thanks!
    R, Katharina

    We have uploaded MT940 file through /nff.5 .
    The posting which has happened after MT940 was uploaded is
    Dr  Main bank account ( 190220)  500 INR
    Cr. Bank Sub Control Account (190228)  500 INR
    The entry which is their is sub control bank account posted on
    Dr. Bank Sub control Account (190228)      500 INR
    Cr. Customer Account                               500 INR
    Their is no other posting also with 500 in sub control account
    But these are not cleared automatically & reflecting in FEBA as to be posted.
    Now out 100 trnsaction the success rate of automatic clearing is 30%.
    What could be the reason?  Is it to do with date etc.
    I undertand that clearing against ( two document ) is against some criteria.
    then what those criteria are.

  • Bank statement balances is not clearde automatically through BDC.

    Dear Friends,
    We are using Manual BRS in our client. For this Our client has requested to update the statement automatically.
    For this we did a BDC progrm to update the statement. BDC program working fine. Because subledger account and main account gets updated.
    But subledger account balances is not getting clear autamatiaclly.
    Ex: when we pass the check to the vendos by using f-53, systom will generate the accounting entry is....
    Vendor account Dr
       To Check issued accout.
    If check has been clear by bank, systom automaticallu pass the entry........
    Check issued account Dr (ff67 or BDC)
       To Main bank account.
    But while updating the statement through BDC, Systom is upadteing the amounts but those balances is not cleared.
    If it is cleared by subledger, we can easyly find out unrecosiled item by subledger account wise.
    Please give me possible sollution.
    Regards,
    Dudekula.

    Hi Bramhiaah,
    You could add the Intepretation Algorithm .i.e rule for clearing in IMG in the same T-code that you create Manual Statement transactions.
    Bank Accounting-> Payment Transactions->Manual bank Statement -> Create/ Assign Business Transactions
    Select the Int Algrthm that you want to use for each transaction.
    In FF67 the same CHECT_KF field can be used to match different fields on the customer document. example the Bank Reference field or CHECT_KF  field can match with check number on the customer document or with the Payorder number depending on the Int Algorthm used for that transaction.
    Please refer to the following link from SAP help site. This gives details of how the Int Algorthm works. Although this documentation is in reference to Electronic Statements, it will help you analyse which Int Algo and how to use it for manual Bank statement. The Int alogrhtms are the same for Electronic as well as manual. The reference field XBLNR is used in several algorthms eg: 001, 021, 026 etc. You can read the documentation and find out the one most suitable.
    On the following link, on the left pane, click on ' Electronic Account Statement (FI-BL)->Using Electronic account statement-> Importing the account statement->Interpreting the Note to payee fields->Interpretation algorithms '
    Link:[http://help.sap.com/saphelp_erp60_sp/helpdata/en/43/0bd87b43de11d1896f0000e8322d00/frameset.htm]
    Hope this helps.
    Thanks & Regards,
    Uma

  • Automatic post of bank statement

    Hello Gurus,
    Sorry for my bad english, i know i need to imrpove it. So if something sounds really odd, sorry.
    Let´s go, here's my problem.
    We have here a non-standard program wich establish a connection with the bank via Business Connector, and do the download of the bank statement to the SAP and process the bank statement automatically, do the entries in G/L account and other stuff of the process. This process was working perfectly, but a month ago, maybe more, the bank statement stopped to be automatically processed, and becomes avaible only for manual processing in FEBA.
    I think it could might be something envolving the KUKEY field of FEBKO table, i dont know. And something strange is happening sometimes the bank statement is processed automatically, so i was wondering if the KUKEY numbers are not repeating or something like that.
    So here is my question is there any standard TCODE wich i can manager this KUKEY numeration? Or any TCODE to manage the bank statements? Or see any diagnoses for this non automatic importation?
    I hope you have understood my scenario.
    Waiting for advices.
    Regards
    Rafael Valim

    Thanks for the reply Raj,
    Any idea what may causing the problem?
    Regards
    Rafael

  • Payment Advice is automatically created during bank statement posting.

    Dear All,
    I am importing bank statement using FF_5, (MT940) but the problem is payment advice is getting generated automatically, due to which i am unable to clear the customer.
    I dont understand how payment advice is getting generated? Please let me know how to stop this payment advice generation? Is there any configuration made due to which the advice is getting generated automatically.
    Regards
    Srikanth

    Hi Srikanth,
    For slove that issue you can remove Cash management payment advice check box at FF_5 it self.
    Regards
    Aneesh

  • Deleted Bank statement - reset the Bank statement.

    Dear Friends,
    The user claims Bank statements were deleted.
    How to find out who deleted them.
    How to reset them?
    Please suggest.
    Regards
    Sridhar Reddy

    Dear Friends,
    Thanks for the time and effort.
    As suggested, I used the T.code FBL3N for the Main Bank account, outgoing and incoming accounts. The FI data was intact.
    It seems that only Bank statements from FF67 were deleted.
    We have promised the user that we will upload the manual bank statement  for one year.
    But there are more than 10 banks and data has to be uploaded.
    Is there any simple process or program which bank data can be uploaded with short span of time.
    Please suggest.
    Regards
    Sridhar

  • Statistics on automatic processed payments by the electronic bank statement

    Hi fellow sap knowledge hungering colleagues.
    I have set up the EBS application in my company and it has now run for 4 month with ok success.
    I now have to do a follow-up on the project and therefore I'm interested in seeing how many payments have been automatic processed by the EBS application.
    I cant seem to find any characteristics on the payment documents that separates the ones that have been automatically processed and those that have been post processed in the FEBA transaction. When each statement is imported you get a sum up on how many pay-ments where automatically processed but is it possible to see overall statistics for all the statements and if not is it possible to recall the statistics for each imported statement?

    Hi,
    the bank normally includes the details provided by the customer in the bank statement.
    depending upon the information provided, the user can clear the customer line items. In order to auto clear using EBS, you can use enhancement FEB00001. You can have your logic to auto clear.
    also refer the Note 494777 - Customer enhancements in electronic bank statement.
    Thanks

  • Automatically post bank charges when treasury uploads the bank statements

    Howdy Gurus,
    Where can i define automatic postings of bank charges when treasury uploads bank statements. Posting needs to takes as:
    1. charges a/c...dr
        to payable a/c
    2. charges a/c... dr
         to  customs a/c
    Can it be solved by defining and configuring
    Thanks  a lot in Advance.
    Prad

    Thanks Pooja,
    I will send you the clear details of the issue, so that you can guide me exactly what need to be done.
    Thanks
    PRa

  • FF67: How to delete Manual Bank Statement

    Hi Experts,
    Can somebody tell me, how to delete Manual Bank Statement which has not been posted.
    Thanks in advance,
    Krsnveni

    Hi,
    You can follow these steps in order to correct delete the bank statement using RFEBKA96.
    1st step. Indentify the statement ID by FF_6
    Fill the field application with 0001 (it is the code for EBS)
    Then you can fulfill also the following fields:
    - Company code
    - House Bank ID
    - Bank Account Id
    Run the program and in the headers of the output you can check the statement number (AZNUM) and the ID (KUKEY).
    Then you run RFEBKA96 for the ID.
    I believe this information will help you to solve your issue.
    Kind Regards,
    Fernando Evangelista

Maybe you are looking for