Bank table and columns 11i and r12

Hi all,
in 11i we have ap_bank_branches.bank_num column. how to get this is r12.
i found bank_number in ce_bank_branches_v, but i need bank_num only.. anyone suggest me on this..

misterimran wrote:
...The problem is that application is case sensitive and try to find table name and columns in small caps...What application could look for tables/columns in small caps ? As stated above, creating tables/columns enclosed by double quotes might help, but that'd mean the code must use double quotes everywhere...
while it gets upper case from Oracle and give error or invalid identifier. It get as is, please show the error.
Nicolas.

Similar Messages

  • Dynamically pass Table name, Column Name and rownum to function

    Hi Guys
    I wanted to pass the table name, column name and rownum to function and get the relevant value for it. Please guide me to achieve this task
    Thanking You
    Regards
    Lakmal

    Thanks,
    Here is my test function
    CREATE or replace FUNCTION GET_COLUMN_VALUE (tab_name VARCHAR2,column_name VARCHAR2) RETURN varchar2 AS
    strsql varchar2 (500);
    ColVal varchar2;
    BEGIN
    strsql:='select '||column_name||' from '||tab_name|| ' Where rownum = 1' ;
    EXECUTE IMMEDIATE strsql into ColVal;
    RETURN ColVal ;
    END;
    Message was edited by:
    Lakmal Marasinghe

  • Check the table and column name in R12 web screen

    Hello Friends
    Please any body can tell me how can I find out the table name and column name in web based forms like supplier, customer in R12. In 11i I can find out the table name and column name from help menu by record history and diagnostic -> examine menu.
    Thansk
    Makshud

    Hi,
    Please see (Note: 741366.1 - How to get Supplier table information? How to get About this Page link in OA page in R12).
    Thanks,
    Hussein

  • How to Create Table Using Column Drag and Drop Feature

    Hi:
    I am new to Oracle SQL dev Data Modeler tool and would like to know if there is a way to create a new table by re-using the existing columns or column groups. The idea is to maintain consistency and save table design time. If columns created previously can be re-used and require drag and drop of column in the right pane, then only new columns need to be manually created.
    Any thoughts on this will be appreciated.
    Thanks!

    Hi Kent
    I checked out the video and tried it in Oracle designer, it works and works great!
    My other question is that I may have several set of columns that I may want to group depending on the table requirements. Can I have multiple templates and choose which one to apply to?
    Also, how do I choose the table where the table template needs to be applied. As I may be interested in applying the table template to selected tables only.
    Thanks
    Edited by: user648132 on Feb 20, 2012 10:47 AM

  • Suppress Overall result (both rows and columns side and its data)

    Hello all,
    I need to do some settings in BEx Query Designer, so that In BEx Analyzer, I don't see 'overall result' both on 'rows' and 'column' sides
    This is what I have done so far
    In 'rows' section, Properties of my KF (no. Products) then 'calculation' tab 'calculate result as'=Suppress result
    This way in BEx Analyzer I don't see the FIGURES/DATA for 'Result' and 'overall result' BUT 'result' and 'overall result' still exist both on rows and colum side even if there are not figures in them.
    Is there any property in BEx Designer so that I don't see 'overall result' at all
    Best regards
    Ahmad

    thanks for responding
    selecting a characteristic, properties, Display tab, Result lines: Always Suppress
    with this I don't see 'result'
    but 'overall result' result exist both on 'rows' and 'column' side alongwith its data.
    If I combine the above with this: selecting KF, properties, calucations, Calculate result as: Suppress result
    then
    I don't see the data in 'overall result' BUT 'overall result' still exist both on rows and column sides
    any setting so that 'overall result' completely vanishes
    Best regards
    Ahsan

  • Table component - column width and background color?

    Is there any way to set the column width on the table component?  And is there any way to set the background color.  I am using Xcelsius 2008.
    Thanks,
    Karen

    Column width and background can be set in the Excel range and then bind table component to display the range.
    If you change the Column width of background in the Excel range, you need to rebind the display range to update the format.
    Hope this can help!

  • How to know a table's column name and its types

    if there has one table called "myEmp" stored in my database, it uses to hold employees' information. when a newcomer is hired, the HR will use a register page to register his/her information. for the flexible purpose, i couldn't know how many columns in this table, since it may be added two columns or deleted one column in one day, all i should do is show all fields in the register page and get all data to insert into this table.
    so, how can i know one table's structure in java? i know there has a method in DatabaseMetadata class: getTables(catalog, schema, tablename, tabletype), it's return is resultset . i wrote a code below:
    DatabaseMetaData md = conn.getMetaData();
    ResultSet md.getTables(null, null, tablename, types);
    i set catalog and schema both are null since i don't know what else can i set?
    the ResultSet doesn't contain the information i want.
    is there anyone can tell me where i am wrong and the right method? thanx a lot!
    sincerely
    Jasmine

    use ResultSetMetaData to get Column names

  • Download internal table data into excel sheet with column heading and data

    Hi,
      I am having one internal table with column headings and other table with data.
    i want to download the data with these tables into an excel sheet.
    It should ask the user for file name to save it on their own name. They should give the file name in runtime and it should be downloaded into an excel sheet.
    Can anyone tell what is the right function module for downloading these two internal table data with column heading and data.
    what we have to do for storing the file name in runtime.
    Can anyone help me on this.
    Thanks,
    Rose.

    Hi Camila,
        Try this
    CALL FUNCTION 'GUI_DOWNLOAD'
      EXPORTING
        FILENAME                        = PATH2
       FILETYPE                        = 'XLS'
      TABLES
        DATA_TAB                        = IT_DATA
       FIELDNAMES                      = IT_HEADINGS
    EXCEPTIONS
       FILE_WRITE_ERROR                = 1
       NO_BATCH                        = 2
       GUI_REFUSE_FILETRANSFER         = 3
       INVALID_TYPE                    = 4
       NO_AUTHORITY                    = 5
       UNKNOWN_ERROR                   = 6
       HEADER_NOT_ALLOWED              = 7
       SEPARATOR_NOT_ALLOWED           = 8
       FILESIZE_NOT_ALLOWED            = 9
       HEADER_TOO_LONG                 = 10
       DP_ERROR_CREATE                 = 11
       DP_ERROR_SEND                   = 12
       DP_ERROR_WRITE                  = 13
       UNKNOWN_DP_ERROR                = 14
       ACCESS_DENIED                   = 15
       DP_OUT_OF_MEMORY                = 16
       DISK_FULL                       = 17
       DP_TIMEOUT                      = 18
       FILE_NOT_FOUND                  = 19
       DATAPROVIDER_EXCEPTION          = 20
       CONTROL_FLUSH_ERROR             = 21
       OTHERS                          = 22

  • How can I make Numbers respect the row and column locks in an Excel workbook opened in Numbers???

    I have a Windows server app that generates Excel workbooks to be emailed to political campaign volunteers to be loaded into Numbers on an iPad, edited, then emailed back to be posted to the server database.  There are two problems encountered:
    1.  The Excel workbook has the first row (column headings) and first column (route identifier) of cells locked, so that they will not scroll off the screen, but Numbers doesn't respect the locks, so when the user scrolls horizontally or vertically, the column headings and/or the route identifier scroll off the screen.
    2.  The Excel workbook has pop-up "tool-tip" type comments in certain column headings in order to provide the user with the acceptable entries for those columns, but Numbers does not respect those.  When the user touches any of the commented column heading cells, a context menu appears instead of the comment.
    What must I do in the Excel workbook sheets, or what settings can be made in Numbers to correct the above?

    I imported a Numbers '09 file into Numbers on the iPad.  All comments were removed during import. Frozen header row and column were retained.
    Thank you for your responses I must ask, however, when you refer to "importing" the Excel file, are you referring to a two step process whereby the Excel file is first converted by some other process into Numbers format, then opened in the Numbers application - which is what I have to do in my PC application to generate the Excel file, and reverse that process to convert the Excel back into my database format - or are you simply referring to opening the file in Numbers as "importing" it?  And please excuse any ignorance, as I'm not at all familiar with Apple's terminologies.  In fact, I don't own an iPad myself, but rather I have to depend on one of my clients to do the testing for me.
    I imported an XLSX file into Numbers on the iPad.  The file used "freeze panes" to "freeze" the first column and row. Only warning on import was that it changed fonts. It imported without the first row and column frozen and with no comments. Nothing I can do about the missing comments but it was a simple matter to turn the first column & row into headers and freeze them.
    Unfortunately this would not be an efficient  solution, since the end users are, for the most part, elderly political campaign volunteers who are fairly computer illiterate.  These workbooks are actually canvassing lists - known as walklists.  Their purpose is for the volunteers to interview voters, record the results of the interviews, and post the results to a database, which provides the campaigns with valuable strategizing capabilities.  Also, these workbooks have multiple pages - as many as 10 or more.  and from what I infer from the above, the setting changes would have to be made on each page.
    My whole intent in developing this iPad/Tablet methodology was to significantly reduce volunteer's work - which is a recruitment benefit - and eliminate paper.  While the latter would be accomplished, the former would not, and in fact would tend to increase it.  It's necessary to keep the first row - column headings - and the first column - the route identifier - from scrolling off the page, so that the volunteer won't have to keep scrolling up and down and right and left to know what the data are.
    Conclusion: Comments are not supported on the iPad version of Numbers.  Frozen headers are not imported from Excel but can be recreated easily.
    I was previously directed to the Apple website  http://www.apple.com/ipad/from-the-app-store/apps-by-apple/numbers.html which extols the wonders of the Numbers application.  About halfway down the page there's a section regarding, "Sliders steppers and pop-ups".  The web page states that pop-ups can be set up but, being a marketing site, gives no indication whatsoever as to how it's done.  I was hoping someone could tell my if there's any way to carry them over from an Excel file.

  • ROW AND COLUMN WIE IN NUMBERS ON IOS

    I do not find a way or any previous discussion about this.
    Of course I could use the first row and column to give nemes to them but this is not the best solution.
    Any suggerstion ?
    I would like to see the row numbers and column letters and keep them on place while scrolling in numbers and in numbers converted files from Excel.
    Thanks

    I do not find a way or any previous discussion about this.
    Of course I could use the first row and column to give nemes to them but this is not the best solution.
    Any suggerstion ?
    I would like to see the row numbers and column letters and keep them on place while scrolling in numbers and in numbers converted files from Excel.
    Thanks

  • Formulas results outside of row and column axis

    The report has an area of row axis and column axis. This area is where the results from BW are displayed.
    We have a requirement where we would have to create formulas using the BW Analyzer results of the row axis and column axis and display the results after the last row of this area.
    For example, after the BW Analyzer displays the result area to the Excel, we are required to take Excel Cell D10 * C7 and put the results to B33.
    <b>B33 = D10*C11</b>
    Excel row 30 is the last row from the row axis result area.
    I have searched through the forum for Cell Editor, but it seems that the requirement is to use 2 structures and use Cell Editor only when there is a formula collision. Our requirement has 1 structure, but I guess we can create the other structure for the column axis results. But still I think Cell Editor is a computation of formula collision within the row and column axis result area.
    My question is will Cell Editor meet our requirement if we want to get formula results from the row and column axis and then display the results outside of the row and column axis result area?
    Our approach was to use the Excel cell formulas in the workbook or possibly macros, but it seems that the Excel formulas will do.
    Would someone clarify about the Cell editor for this requirement and how would you approach this?
    Would this be effective to do the formulas from the query level? We are working on 3.5 SP11.

    Can Cell editor do the following:
    1. Create structures
    2. Run the query
    3. The results of the structures are displayed in the row and column axis of the BEx Analyzer
    4. Save as a workbook
    5. Use the Cell Editor to pick and choose the cells (Not the Excel cells) to create formulas
    6. The formula results are then displayed outside of the row and column axis.
    Would this be another approach?
    What scenario can Cell editor be used? What scenario can Cell editor not be used?
    Thanks

  • Localization of CrossTab row and column label Crystal Report RPT file

    Dear all,
    Does anyone know how to support multiple locale texts (English and French) in CrossTab Row and Column Header labels and grand total labels? Is there a way to parameterize text objects CrossTab in one single Crystal Report RPT file to use some sort of locale resource file containing text string for different languages based on the users of RPT at runtime? The idea is to use one single RPT file to generate report for different locale text for CrossTab Row and Column abels and grand total labels  instead of creating RPT files per locale?

    Hi,
    Does the database have a column that identifies the language? If it does, then you could create two separate cross-tabs and place them in different sections and conditionally suppress the section depending on the language from the database.
    That's the only thing that can be done in my opinion.
    -Abhilash

  • In Alv table, a column is editable mode, but want few cells in read only

    Hi All,
    I have a ALV table which column A and B.
    Both are in editable mode. I want to make fews in column B, to be read only.
    How to make it. Please help me.
    Thanks
    Vimalraj

    hi,
    refer this program,
    *& Report  ZALV_COLOR_DISPLAY_EDIT
    REPORT  zalv_color_display_edit.
    TYPE-POOLS: slis.
    TABLES : zcust_master2.
    INTERNAL TABLE DECLARATION
    TYPES : BEGIN OF wi_zcust_master2,
            zcustid LIKE zcust_master2-zcustid,
            zcustname LIKE zcust_master2-zcustname,
            zaddr LIKE zcust_master2-zaddr,
            zcity LIKE zcust_master2-zcity,
            zstate LIKE zcust_master2-zstate,
            zcountry LIKE zcust_master2-zcountry,
            zphone LIKE zcust_master2-zphone,
            zemail LIKE zcust_master2-zemail,
            zfax LIKE zcust_master2-zfax,
            zstat LIKE zcust_master2-zstat,
            field_style  TYPE lvc_t_styl,
    END OF wi_zcust_master2.
    DATA: it_wi_zcust_master2 TYPE STANDARD TABLE OF wi_zcust_master2
                                                     INITIAL SIZE 0,
          wa_zcust_master2 TYPE wi_zcust_master2.
    *ALV data declarations
    DATA: fieldcatalog TYPE slis_t_fieldcat_alv WITH HEADER LINE.
    DATA: it_fieldcat TYPE lvc_t_fcat,     "slis_t_fieldcat_alv WITH HEADER
    line,
          wa_fieldcat TYPE lvc_s_fcat,
          gd_tab_group TYPE slis_t_sp_group_alv,
          gd_layout    TYPE lvc_s_layo,     "slis_layout_alv,
          gd_repid     LIKE sy-repid.
    START-OF-SELECTION.
      PERFORM data_retrieval.
      PERFORM set_specific_field_attributes.
      PERFORM build_fieldcatalog.
      PERFORM build_layout.
      PERFORM display_alv_report.
    *&      Form  BUILD_FIELDCATALOG
          Build Fieldcatalog for ALV Report
    FORM build_fieldcatalog.
      wa_fieldcat-fieldname   = 'ZCUSTID'.
      wa_fieldcat-scrtext_m   = 'CUSTOMER ID'.
      wa_fieldcat-col_pos     = 0.
      wa_fieldcat-outputlen   = 10.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZCUSTNAME'.
      wa_fieldcat-scrtext_m   = 'CUSTOMER NAME'.
      wa_fieldcat-col_pos     = 1.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZADDR'.
      wa_fieldcat-scrtext_m   = 'ADDRESS'.
      wa_fieldcat-col_pos     = 2.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZCITY'.
      wa_fieldcat-scrtext_m   = 'CITY'.
      wa_fieldcat-col_pos     = 3.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZSTATE'.
      wa_fieldcat-scrtext_m   = 'STATE'.
      wa_fieldcat-col_pos     = 4.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZCOUNTRY'.
      wa_fieldcat-scrtext_m   = 'COUNTRY'.
      wa_fieldcat-col_pos     = 5.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZPHONE'.
      wa_fieldcat-scrtext_m   = 'PHONE NUMBER'.
      wa_fieldcat-col_pos     = 6.
    wa_fieldcat-edit        = 'X'. "sets whole column to be editable
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZEMAIL'.
      wa_fieldcat-scrtext_m   = 'EMAIL'.
      wa_fieldcat-edit        = 'X'. "sets whole column to be editable
      wa_fieldcat-col_pos     = 7.
      wa_fieldcat-outputlen   = 15.
      wa_fieldcat-datatype     = 'CURR'.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZFAX'.
      wa_fieldcat-scrtext_m   = 'FAX'.
      wa_fieldcat-col_pos     = 8.
      wa_fieldcat-edit        = 'X'. "sets whole column to be editable
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
      wa_fieldcat-fieldname   = 'ZSTAT'.
      wa_fieldcat-scrtext_m   = 'STATUS'.
      wa_fieldcat-col_pos     = 9.
      APPEND wa_fieldcat TO it_fieldcat.
      CLEAR  wa_fieldcat.
    ENDFORM.                    " BUILD_FIELDCATALOG
    *&      Form  BUILD_LAYOUT
          Build layout for ALV grid report
    FORM build_layout.
    Set layout field for field attributes(i.e. input/output)
      gd_layout-stylefname = 'FIELD_STYLE'.
      gd_layout-zebra             = 'X'.
    ENDFORM.                    " BUILD_LAYOUT
    *&      Form  DISPLAY_ALV_REPORT
          Display report using ALV grid
    FORM display_alv_report.
      gd_repid = sy-repid.
    call function 'REUSE_ALV_GRID_DISPLAY'
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY_LVC'
        EXPORTING
          i_callback_program = gd_repid
          is_layout_lvc      = gd_layout
          it_fieldcat_lvc    = it_fieldcat
          i_save             = 'X'
        TABLES
          t_outtab           = it_wi_zcust_master2
        EXCEPTIONS
          program_error      = 1
          OTHERS             = 2.
      IF sy-subrc <> 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
            WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
      ENDIF.
    ENDFORM.                    " DISPLAY_ALV_REPORT
    *&      Form  DATA_RETRIEVAL
          text
    -->  p1        text
    <--  p2        text
    FORM data_retrieval .
      DATA: ld_color(1) TYPE c.
      SELECT zcustid zcustname zaddr zcity zstate zcountry zphone zemail
    zfax zstat UP TO 10 ROWS FROM zcust_master2 INTO CORRESPONDING FIELDS OF
    TABLE it_wi_zcust_master2.
    ENDFORM.                    "data_retrieval
    *&      Form  set_specific_field_attributes
          populate FIELD_STYLE table with specific field attributes
    FORM set_specific_field_attributes .
      DATA ls_stylerow TYPE lvc_s_styl .
      DATA lt_styletab TYPE lvc_t_styl .
    Populate style variable (FIELD_STYLE) with style properties
    The following code sets it to be disabled(display only) if 'ZFAX'
    is NOT INITIAL.
      LOOP AT it_wi_zcust_master2 INTO  wa_zcust_master2.
        IF  wa_zcust_master2-zfax IS NOT INITIAL.
          ls_stylerow-fieldname = 'ZFAX' .
          ls_stylerow-style = cl_gui_alv_grid=>mc_style_disabled.
                                          "set field to disabled
          APPEND ls_stylerow  TO  wa_zcust_master2-field_style.
          MODIFY it_wi_zcust_master2  FROM  wa_zcust_master2.
        ENDIF.
      ENDLOOP.
    ENDFORM.                    "set_specific_field_attributes
    Regards,
    K.Tharani.

  • Mapping of columns from 11i to R12 0 - AP Bank Accounts

    Hi All,
    We are working on application migration from 11i to R12.
    In our report columns bank_account_uses_id, customer_site_use_id and primary_flag from table AP_BANK_ACCOUNT_USES_ALL are used. Can some one help me to find how these columns are mapped in R12.
    I have all ready searched in tables IBY_PMT_INSTR_USES_ALL, IBY_EXTERNAL_PAYEES_ALL and IBY_EXT_BANK_ACCOUNTS but not able to locate exact columns.
    Regards,
    Nandeep

    Hi,
    Please refer to:
    Note: 579132.1 - R12 Payments and Payment Reports 'How To' documents), 2. How to Setup Banks in R12
    Note: 434195.1 - Bank Setups in R12 Question
    Regards,
    Hussein

  • How to find and replace the table name/column name

    We have just upgraded the application to R12. Have many reports developed in Oracle Reports Builder. There are many changes in R12 table and column names when compare with 11i. Please suggest a solution to change the table name or column name in multiple reports queries instead of doing manually.

    A Google search may turn up a downloadable service manual for the Laserjet 4600.
    You might also ask in the HP Enterprise Business Community Forum here.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for