BAPI_ACC_INVOICE_RECEIPT_POST - Updating Customer Group

Does anyone know how i can update 'Customer Group' in the profit segment part of a document using the above BAPI.
Can it be done ?
Thanks

hi
I'm searching a BAPI for F-53.
then i found your thread.
but i don't know what data to be filled in it.
can u please provide me some sample data that needs to be filled in this bapi.
awaiting your reply.
Regards,
Suman.

Similar Messages

  • Error in delta load of 'Customer Group' from R/3 to CRM

    Hi Experts,
    I added new 'Customer Groups' in R/3. But this is not being updated in CRM. Do I have to trigger initial load again through R3AS or should I create new Customer Groups in CRM?
    The BP delta load BDocs are stuck in SMW01 due to this change. Also, if I need to do the Initial load of Customer Group, which object do I need to do the load for? Is it dnl_cust_sales?
    Please help as it is a Production issue.
    -- Pat

    Hi Pat,
    Use object 'DNL_CUST_SALES' to download Customer Group from R/3 to CRM.
    Use R3AS4 transaction to execute the same.
    Best Regards,
    Pratik Patel
    <b>Reward with Points!</b>

  • RFDOPR10 dynamic selection to add customer group field

    Hello,
    I am trying to add the customer group field in the dynamic selection
    option, when running the RFDOPR10 report. I don't seem to find the
    option to add the customer group field (KNVV-KDGRP). I tried looking in
    the config, but was not able find this report. I also looked for any
    OSS notes, but didn't find anything either.
    Can anyone please tell me if this possible to do? Thanks.
    Ahsan

    you have to update all the following routines in program RM07MLBD which load stock
    IF      BWBST = 'X'.
    *   select the valuated stocks
        PERFORM                  AKTUELLE_BST_BWBST.
      ELSEIF LGBST = 'X'.
    *   all own stock from storage locations or batches
        IF XCHAR = ' '.
          PERFORM                AKTUELLE_BST_LGBST_MARD.
        ELSEIF  XCHAR = 'X'.
          PERFORM                AKTUELLE_BST_LGBST_XCHAR.
        ENDIF.
      ELSEIF   SBBST = 'X'.
    *    special stocks
        CASE    SOBKZ.
          WHEN  'O'.
            PERFORM              AKTUELLE_BST_SBBST_O.
          WHEN  'V' OR  'W'.
            PERFORM              AKTUELLE_BST_SBBST_V_W.
          WHEN  'K' OR  'M'.
            PERFORM              AKTUELLE_BST_SBBST_K_M.
          WHEN  'Q'.
            PERFORM              AKTUELLE_BST_SBBST_Q.
          WHEN  'E'.
            PERFORM              AKTUELLE_BST_SBBST_E.
          WHEN  OTHERS.
    *       Angegebener Sonderbestand nicht vorhanden.
            MESSAGE S290.
            PERFORM              ANFORDERUNGSBILD.
        ENDCASE.
      ENDIF.
    But as material group is in MARA, you could fill a table from MARA using the SELECT-OPTIONS FOR MARA-MAKTL, then update the routine using a FOR ALL ENTRIES OF the result table (if not empty) (you could also use a JOIN with MARA)
    Regards

  • Copa derivation rule for customer group

    Hi All,
    I am currently facing an issue with Derivation rule and hope someone can help me on resolving  this.I have created a COPA derivation rule which has field as
    Source Field
    company code
    Plant
    Target field
    Distribution channel
    Condition
    customer group 3 = 18.
    so ideally with this conbination the distribtion channel gets updated
    for the sales order.
    However the issue we are facing is that the rule is working for only 1st line item and not for the others. I have also kept setting as" overwrite values only if new values found"
    e.g if we see the accounting doc of billing then
    line item 1 customer: x
    line item 2 SaLes GL: rule works fine and dist channel is updated.
    line item 3 discount GL: rule does not work.
    Have checked the derivation rule and it looks correct.
    Can you kindly suggest solution to this.

    Hi Ajay,
    Thank you so much for your reply.Please note that the GL is a cost element but the category in system is 1 and not 12.However I would like understand as to why is this happening.why does the system picks up derviation rule for a Gross sales GL and not for Discount GL(Cost element).
    The distribution channel  gets updated for sales GL when i check the prof segment of the line item, however this is not the case with doscount GL.
    I would like to understnad the implication before changing cost element category from 1 to 12 as it runs across system.
    Kindly provide some more explaination.
    thanks in advance.

  • Group Conditoin based on Customer Group

    Hi Experts,
    I have used a Group Condition feature of Pricing. (Group Condition tick mark in Transaction - V/06)
    Now actual use of this Group Condition is somewhat like mentioned below as per the F1 Help.
    "For a group condition to be effective, the items must belong to a group. You can freely define the group to meet the needs of your own organization. The items can, for example, all belong to the same material group."
    Now I want to know that what are the different groups which are considered for applying Group Condition concept.
    I want to apply this Group Condition concept for the line items with the same customer group. (material group can be different for them).
    Is it possible? If yes, how can I set / configure it? If not, is there any other alternative for that (like GrpCond.Routine)?
    Thanks in advance.
    Kind Regards,
    HP

    Hi Krishna,
    Thannks a lot for reply.
    Actually I am aware about VOFM and how to write Routines also. My problem here is that I dont know what Structure or Internal Table should I play with in the Routine.
    For Example if I write a routine for a normal pricing we use fields XKWERT, XKWART or Structure XKOMV with field KWERT, KWART etc.
    So in the same way what should I change or use or update to change the Group Condition Check base?
    Like as in F1 Help, it is mentioned...
    "For a group condition to be effective, the items must belong to a group. You can freely define the group to meet the needs of your own organization. The items can, for example, all belong to the same material group."
    Here if the material group (KONDM) is same, it the group condition will work. That means somewhere I need to replace KONDM by KDGRP in the Routine. Where do I find this and replace KONDM by KDGRP?
    Thanks in advance.
    Kind Regards,
    HP

  • Would like to Update customer relation ship (KNVP )

    Customer data (sold to / ship to / customer group) is there in KNA1 table but relation ship is missing.
    I would like to import customer relation ship  (like ZG/WE for PARVW) in KNVP table, please suggest the API . I tried CUSTOMER_UPDATE but got error.
    Edited by: Rahul Misra on Jun 24, 2009 1:58 PM

    The FM CUSTOMER_INSERT is an update task function module, this FM is called by standard report along with other such modules after every check has been performed, it does nothing more than direct database update and MUST not be used in custiomer reports.
    Look at thread BAPI for Customer Create, for [Alain Bacchi|https://forums.sdn.sap.com/profile.jspa?userID=3564066] answer.
    Regards,
    Raymond

  • Customer Groups Replication - Middleware

    Dear Experts,
    We are replicating master data from R/3 to CRM. Yesterday, R/3 team has defined  new customer groups in R/3 system, and here in CRM  as we do not have those groups, all the BPs in that new groups coming as error BDocs.
    The error says "Customer Group 4 HYD is not available, enter a valid customer group". How can I maintain these newly defined  R/3 customer groups in CRM system?
    Should I manually maintain those in CRM system or throgh any updation of objects like for ex:- DNL_CUST_TKUKL(for BP Classification)?
    Thanks in Advance.
    regards,
    kalyan

    Dear TooCann,
    Thanks a lot for your immediate response.
    When i was trying to reload the object DNL_CUST_PRICE thru R3AS, it is showing an error-
    "No initial load if data distribution is active, Use Synchro.Load" "Object will not be loaded"
    But, I tried thru R3AS4 also and it is saying "No Synchro load is Possible".
    Kindly help me.
    regards,
    kalyan

  • Mass update Customer Sale data error?

    I test mass to update customer master data--sale area data:  sale district ,sale office,sale group three fields,
    I input Tcode:MASS ,select KNA1 and excute, then select KNVV table and excute, input a customer
    number in data records to be changed tab and excute, and use the Select Fields command button to select
    sale district ,sale office,sale group three field to update.then input new values in top window, and select the
    three fields ,click the Carry out a mass change command button,copy the new values to the customer.
    and at the end click the Save command button,but the system show me an error screen. and cont't see the
    error long text.
    "Messages Were Saved in the Application Log MASS KNA1 000051
    Errors: 1      Warning: 0      Information: 0
    mass Maint. status
    Icoon       Message Text          Notificat.No.
    red light   customer number   ZYSH053
    Is there anyone can tell me why?
    Thansk,
    yongqian wang

    sorry, the customer number is 800001,ZYSH053 is Notificat.No.
    "Messages Were Saved in the Application Log MASS KNA1 000051
    Errors: 1      Warning: 0      Information: 0
    mass Maint. status
    Icoon                  Message Text                                      Notificat.No.
    red light              800001                                  ZYSH053

  • Using LSMW to update customer address data via RFBIDE00

    Hi, I wonder if anybody has dealed with same issue for using LSMW with program RFBIDE00 to update customer address data.
    We need to update the customer address data in the central address management data. Since those fields do not exist in basic structure of BKNA1, for example, C/O name, street 2 to Street 5, I am putting the mapping of the source fields to map to BIADDR2. However, all the data I mapped to BIADDR2 is not updating in the customer records. When looking into the code of RFBIDE00, the codes will only transfer the data from BIADDR2 if the customer account group is marked as consumer which our case is just a sold to, ship to, not consumer.
    Does anybody have faced this issue before? Where should the exact central address data be mapped to in RFBIDE00?
    We are using ECC6.0. Any advise is appreciated.

    Found the answer from SDN - not possible unless using some BUS.
    RFBIDE00 - Address data issue
    Thread closed.

  • Customer groups derived from wrong partner

    Hello,
    In our current situation customer group 2 and 3 (VBAK KVGR2/KVGR3) in the sales order are derived from the sales to party. I want them to be derived from the ship to party. How can I change this?
    Regards, Jan

    Can anyone tell me which user exit I should use to update this field in a sales order?
    Regards, Jan

  • Customer Groups

    Hi,
    I have created few of the customer groups. And I want to delete few of them from the listed customer groups when I deleted and clicked on update the following error ocured as Not enough data. There are no transaction made yet.

    You should use the menu:
    Data / Remove

  • Error while deleting a custom group associated with role 'BIConsumer'

    Hi All,
    We are using OBIEE 11.1.1.6.2 and using the BISQLGroupProvider to get the groups from database tables for an user available in LDAP.
    I have a group named 'OBA Test Group' created in a database table. This group is linked to a user in another database table.
    In OBIEE enterprise manager, the group 'OBA Test Group' is associated with Application role 'BIConsumer'.
    In OBIEE enterprise manager , when i try to remove this custom group from the application role 'BIConsumer' i am getting the error as 'The search for role OBA Test Group failed'.
    In the admin log below is the error message:
    java.sql.SQLSyntaxErrorException: ORA-00918: column ambiguously defined
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
    at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
    at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
    at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
    at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
    at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
    at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
    at oracle.jdbc.driver.T4CPreparedStatement.executeForDescribe(T4CPreparedStatement.java:947)
    at oracle.jdbc.driver.OracleStatement.executeMaybeDescribe(OracleStatement.java:1283)
    at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1441)
    at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
    at oracle.jdbc.driver.OraclePreparedStatement.executeQuery(OraclePreparedStatement.java:3823)
    at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeQuery(OraclePreparedStatementWrapper.java:1671)
    at weblogic.jdbc.wrapper.PreparedStatement.executeQuery(PreparedStatement.java:135)
    at oracle.ods.virtualization.engine.backend.db.DBEntrySet2.hasMoreInternal(DBEntrySet2.java:284)
    at oracle.ods.virtualization.engine.backend.db.DBEntrySet2.initialize(DBEntrySet2.java:176)
    at oracle.ods.virtualization.engine.backend.db.BackendDB.getMatches(BackendDB.java:2108)
    at oracle.ods.virtualization.engine.backend.db.BackendDB.get(BackendDB.java:885)
    at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:303)
    at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
    at oracle.ods.virtualization.engine.chain.plugins.virtualattr.VirtualAttributePlugin.get(VirtualAttributePlugin.java:220)
    at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
    at oracle.ods.virtualization.engine.chain.PluginChain.runGet(PluginChain.java:211)
    at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:351)
    at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:316)
    at oracle.ods.virtualization.engine.backend.AdapterServiceInterface.getByAdapter(AdapterServiceInterface.java:582)
    at oracle.ods.virtualization.engine.backend.AdapterServiceInterface.get(AdapterServiceInterface.java:453)
    at oracle.ods.virtualization.engine.backend.BackendHandler.get(BackendHandler.java:429)
    at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:295)
    at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
    at oracle.ods.virtualization.engine.chain.plugins.uniqueentry.UniqueEntryPlugin.get(UniqueEntryPlugin.java:132)
    at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
    at oracle.ods.virtualization.engine.chain.BasePlugin.get(BasePlugin.java:89)
    at oracle.ods.virtualization.engine.chain.plugins.mlsfilter.MlsFilter.get(MlsFilter.java:116)
    at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
    at oracle.ods.virtualization.engine.chain.plugins.genericmapping.GenericMapper.get(GenericMapper.java:241)
    at oracle.ods.virtualization.engine.chain.Chain.nextGet(Chain.java:314)
    at oracle.ods.virtualization.engine.chain.PluginChain.runGet(PluginChain.java:211)
    at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:351)
    at oracle.ods.virtualization.engine.chain.PluginManager.runGet(PluginManager.java:316)
    at oracle.ods.virtualization.engine.chain.GlobalServicesInterface.runGet(GlobalServicesInterface.java:137)
    at oracle.ods.virtualization.operation.SearchOperation.process(SearchOperation.java:168)
    at oracle.ods.virtualization.service.DefaultVirtualizationSession.search(DefaultVirtualizationSession.java:191)
    at oracle.ods.virtualization.service.DefaultVirtualizationSession.search(DefaultVirtualizationSession.java:175)
    at oracle.security.idm.providers.libovd.util.LibOVDDirectSearchResponse.search(LibOVDDirectSearchResponse.java:302)
    at oracle.security.idm.providers.libovd.util.LibOVDDirectSearchResponse.getNextPage(LibOVDDirectSearchResponse.java:291)
    at oracle.security.idm.providers.libovd.util.LibOVDDirectSearchResponse.initSearch(LibOVDDirectSearchResponse.java:130)
    at oracle.security.idm.providers.libovd.util.LibOVDNonPagedSearchResponse.<init>(LibOVDNonPagedSearchResponse.java:59)
    at oracle.security.idm.providers.libovd.util.LibOVDRealm.searchRoles(LibOVDRealm.java:477)
    at oracle.security.idm.providers.libovd.LibOVDIdentityStore.searchRole(LibOVDIdentityStore.java:538)
    at oracle.security.jps.mas.mgmt.jmx.policy.JpsPolicyUtil.convertPortablePrincipal(JpsPolicyUtil.java:333)
    at oracle.security.jps.mas.mgmt.jmx.policy.JpsPolicyUtil.convertPortablePrincipal(JpsPolicyUtil.java:277)
    at oracle.security.jps.mas.mgmt.jmx.policy.JpsApplicationPolicyStoreImpl.addRemoveMembersToRole(JpsApplicationPolicyStoreImpl.java:566)
    at oracle.security.jps.mas.mgmt.jmx.policy.JpsApplicationPolicyStoreImpl.removeMembersFromApplicationRole(JpsApplicationPolicyStoreImpl.java:617)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.doInvoke(OracleStandardEmitterMBean.java:1012)
    at oracle.adf.mbean.share.AdfMBeanInterceptor.internalInvoke(AdfMBeanInterceptor.java:104)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.generic.spi.security.AbstractMBeanSecurityInterceptor.internalInvoke(AbstractMBeanSecurityInterceptor.java:190)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor$2.run(JpsJmxInterceptor.java:358)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.jmx.JpsJmxInterceptor.internalInvoke(JpsJmxInterceptor.java:374)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.generic.spi.interceptors.ContextClassLoaderMBeanInterceptor.internalInvoke(ContextClassLoaderMBeanInterceptor.java:103)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.generic.spi.interceptors.MBeanRestartInterceptor.internalInvoke(MBeanRestartInterceptor.java:116)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.generic.spi.interceptors.LoggingMBeanInterceptor.internalInvoke(LoggingMBeanInterceptor.java:524)
    at oracle.as.jmx.framework.generic.spi.interceptors.AbstractMBeanInterceptor.doInvoke(AbstractMBeanInterceptor.java:252)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterMBean.invoke(OracleStandardEmitterMBean.java:924)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterConfigMBean.doInvoke(OracleStandardEmitterConfigMBean.java:398)
    at oracle.as.jmx.framework.standardmbeans.spi.OracleStandardEmitterConfigMBean.invoke(OracleStandardEmitterConfigMBean.java:359)
    at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:836)
    at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:761)
    at weblogic.management.mbeanservers.domainruntime.internal.FederatedMBeanServerInterceptor.invoke(FederatedMBeanServerInterceptor.java:349)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
    at weblogic.management.mbeanservers.internal.JMXContextInterceptor.invoke(JMXContextInterceptor.java:263)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
    at weblogic.management.mbeanservers.internal.SecurityMBeanMgmtOpsInterceptor.invoke(SecurityMBeanMgmtOpsInterceptor.java:65)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase$16.run(WLSMBeanServerInterceptorBase.java:449)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServerInterceptorBase.invoke(WLSMBeanServerInterceptorBase.java:447)
    at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:444)
    at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11$1.run(JMXConnectorSubjectForwarder.java:663)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder$11.run(JMXConnectorSubjectForwarder.java:661)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
    at weblogic.management.mbeanservers.internal.JMXConnectorSubjectForwarder.invoke(JMXConnectorSubjectForwarder.java:654)
    at javax.management.remote.rmi.RMIConnectionImpl.doOperation(RMIConnectionImpl.java:1427)
    at javax.management.remote.rmi.RMIConnectionImpl.access$200(RMIConnectionImpl.java:72)
    at javax.management.remote.rmi.RMIConnectionImpl$PrivilegedOperation.run(RMIConnectionImpl.java:1265)
    at javax.management.remote.rmi.RMIConnectionImpl.doPrivilegedOperation(RMIConnectionImpl.java:1367)
    at javax.management.remote.rmi.RMIConnectionImpl.invoke(RMIConnectionImpl.java:788)
    at javax.management.remote.rmi.RMIConnectionImpl_WLSkel.invoke(Unknown Source)
    at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
    at weblogic.rmi.internal.BasicRemoteRef.invoke(BasicRemoteRef.java:222)
    at javax.management.remote.rmi.RMIConnectionImpl_1035_WLStub.invoke(Unknown Source)
    at javax.management.remote.rmi.RMIConnector$RemoteMBeanServerConnection.invoke(RMIConnector.java:993)
    at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
    at weblogic.management.remote.wlx.ClientProvider$WLXMBeanServerConnectionWrapper.invoke(ClientProvider.java:291)
    at oracle.sysman.emas.model.security.EditAppRolesAdminBean.updateAppRole(EditAppRolesAdminBean.java:287)
    at oracle.sysman.emas.model.security.EditAppRolesAdminBean.updateAppRole(EditAppRolesAdminBean.java:214)
    at oracle.sysman.emas.pagemodel.security.identity.EditAppRolePageModel.applyChanges(EditAppRolePageModel.java:344)
    at oracle.sysman.emas.view.security.identity.EditAppRoleViewBean.applyCommand_action(EditAppRoleViewBean.java:127)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:597)
    at com.sun.el.parser.AstValue.invoke(Unknown Source)
    at com.sun.el.MethodExpressionImpl.invoke(Unknown Source)
    at org.apache.myfaces.trinidad.component.MethodExpressionMethodBinding.invoke(MethodExpressionMethodBinding.java:46)
    at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:102)
    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:102)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$1.run(ContextSwitchingComponent.java:92)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:361)
    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:96)
    at oracle.adf.view.rich.component.fragment.UIXInclude.broadcast(UIXInclude.java:96)
    at javax.faces.component.UIViewRoot.broadcastEvents(UIViewRoot.java:475)
    at javax.faces.component.UIViewRoot.processApplication(UIViewRoot.java:756)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._invokeApplication(LifecycleImpl.java:920)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl._executePhase(LifecycleImpl.java:406)
    at oracle.adfinternal.view.faces.lifecycle.LifecycleImpl.execute(LifecycleImpl.java:197)
    at javax.faces.webapp.FacesServlet.service(FacesServlet.java:265)
    at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
    at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
    at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
    at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.emSDK.license.LicenseFilter.doFilter(LicenseFilter.java:101)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.model.servlet.ADFBindingFilter.doFilter(ADFBindingFilter.java:205)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adfinternal.view.faces.webapp.rich.RegistrationFilter.doFilter(RegistrationFilter.java:128)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at oracle.adfinternal.view.faces.activedata.AdsFilter.doFilter(AdsFilter.java:60)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl$FilterListChain.doFilter(TrinidadFilterImpl.java:446)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl._doFilterImpl(TrinidadFilterImpl.java:271)
    at org.apache.myfaces.trinidadinternal.webapp.TrinidadFilterImpl.doFilter(TrinidadFilterImpl.java:177)
    at org.apache.myfaces.trinidad.webapp.TrinidadFilter.doFilter(TrinidadFilter.java:92)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.help.web.rich.OHWFilter.doFilter(Unknown Source)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.emas.fwk.MASConnectionFilter.doFilter(MASConnectionFilter.java:41)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.adf.library.webapp.LibraryFilter.doFilter(LibraryFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.AuditServletFilter.doFilter(AuditServletFilter.java:179)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.EMRepLoginFilter.doFilter(EMRepLoginFilter.java:203)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.core.model.targetauth.EMLangPrefFilter.doFilter(EMLangPrefFilter.java:158)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.core.app.perf.PerfFilter.doFilter(PerfFilter.java:141)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.sysman.eml.app.ContextInitFilter.doFilter(ContextInitFilter.java:542)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
    at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
    at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
    at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
    at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
    at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
    at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3715)
    at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3681)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
    at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
    at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
    at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
    at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
    Please let me know if any more information is required.
    Regards,
    MKMOHANTY

    I suffered a similar situation, the solution I found was edit the file named "system-jazn-data.xml" and remove the entries that correspond to the role (expected to be delete). Of course take the precautions before do this actions (backup the file and do it in an test scenario).
    Regards.

  • Error in updating custom database table using UPDATE SET Command

    Hi,
    I developed an automated collection system program in one of our clients simulating FBE1 (Payment Advice Creation) and F-28 (Posting of Incoming Payments) transaction codes. Upon posting, we encountered an error in PRD server wherein, for some of the posted items, the STATUS field in our custom table was not successfully updated. We tried to reverse the clearing document and debug the program. Upon posting, we were able to successfully update the status. We could not simulate the error in QAS since all the postings in QAS were successful and all status' relating to these postings were updated as well. We tried posting multiple times and the program seems to be working fine. In PRD, this behavior is just random and there is no specific pattern as to how the error occured. Provided below is the code I used for updating custom table ZFIACSF28. The STATUS field should be equal to '4' once the posting is successful. We are not sure if this is a database related issue. 7 users are authorized to do the postings in PRD and they are using the same user account.
    CODE:
      CALL TRANSACTION 'F-28' USING gt_bdcdata
                              MODE   'E'
                              UPDATE 'S'
                              MESSAGES INTO gt_messtab.
      READ TABLE gt_messtab INTO wa_messtab WITH KEY msgtyp = 'S'
                                                     msgnr  = '312'.
      IF sy-subrc EQ 0.
    update status for items cleared bearing the same OR Number*
        UPDATE zfiacsf28 SET status       = '4'
                             zsapdocument = wa_messtab-msgv1(10)
                             zruntime     = sy-uzeit
                             zrundate     = sy-datum
                       WHERE zor          = gv_zor
                       AND   customer     = gv_customer.
        COMMIT WORK.
    ENDIF.

    Hi,
    it's not possible that status isn't updated in zfiacsf28 while date and time are updated there, because it's hard coded.
    There must be other programs that also change your table zfiacsf28 and maybe clear those fields. Maybe the key fields zor and customer cannot provide  duplicate access, what is the meaning of field zor ?
    Please check the where used list of table zfiacsf28 to find other update programs.
    Regards,
    Klaus

  • "Custom" grouping and / or colored lines in ALV

    Hi!
    Two questions:
    1. Is it possible to use colors in the ALV for a given set of rows? I'd like to mark rows with a color, which are logically belongs together.
    2. Other approach would be to sort the ALV and via that the "similar" rows (i.e. some column values in the rows have the same value ) would be grouped.
    The normal ALV grouping feature is too general. E.g if the ALV contains a lot of empty cells, then those cells will be grouped as well, nevertheless they are logically don't belong together -> looks quite weird.
    If the custom grouping cannot be realized, then my approach would be the following:
    1. Sorting the table. -> rows where the content partially equal are in succession.
    2. Manually clear the cells in the second (in my business case only two lines can be partially equal, others are unique) row, which are the same as in the previous row.
    3. Use coloring to indicate that these two lines are belonging together.
    Best regards,
    Peter

    Hi Peter,
    It is possible to assign colors to a specific row. But you need to have some work around.
    You have to create an extra attribute for each column that you have in your table. The type of that attribute should be of WDUI_TABLE_CELL_DESIGN.
    After Instatiating your ALV Component you have to use the following statement for the column that you have to apply the color.
    ls_column-r_column->set_cell_design_fieldname( COLUMN1_DESIGN ). Assuming ls_column-r_column will have COLUMN1 as filed name.
    There are 16 colors that are defined and each combination from '00' to '15' will define one color.
    Look at the structure below.  Its a table with 4 columns(2nd and 4th represents colors for first and third columns)
    value11          00            value12          00
    value21          00            value22          00
    value31          02            value32          02.
    If you consider the above struture as your output table 3 rows and 4 columns  then your third row will be highlighted in green color because 02 represents green. You can hide your second column and fourth column in above example because they represents colors. Use the following statement to hide those columns.
    ls_column-r_column->set_visible(
                     cl_wd_uielement=>e_visible-none ). "ls_column-r_column will have 'COLUMN1_DESIGN'
    Let me know if you know more code.
    Thank You,
    Gajendra.

  • How to add the User in customized Group.

    Hi All,
         If we create any User in SAP Portal then that user is assigned to
    everyone group by default.Now i have one custom group,say 'ABC'.what i
    want is, which ever user is being created through SAP Portal should be
    added to this group.
    one way i think, is to create a webDynpro application which will add
    all the portal users to the customized group but the problem is how to
    run this appl.Continuously.
    regards,
    Mithileshwar

    Hi!
    I do the test here, try this:
    In group ABC, add Everyone role in Assigned Roles.
    In my case I’m using a role XXX in group Everyone and I configured all iViews for this role.
    Regards,
    Edson Thomaz

Maybe you are looking for

  • Trying to do a system recovery

    Hi, so I have an HP notebook and a few days a ago I did a system recovery to its factory settings. Problem is, when it got to the second disk, around 60% it gave an error and stopped. I dont know why, the disks look like they are in tip top shape. I

  • Itunes wont load,install or unistall cant update or sync

    I plugged my iphone4 in the other day to sync an itunes came on then it disapearred and wont come back on at all, ive tried everything from unistalling an reinstalling deleting all temp files and everything else ive read and nothing is helps, it wont

  • Does the macbook pro gives a slight electrical shock when charging?

    When the Macbook Pro is charging, I can feel a little electricity in my fingertips. Unfotunately, I don't have a three prong outlet, just two. Either way, I think this was not supposed to be. Anyone can share some answers? Thanks, Muriel

  • Can i divide the page size like 50%where  two regions should appear

    Hai.. Can i divide the page size like 50%where two regions should appear, and in another 50% one more reion should apper ... how can i do that Thanks Anoo

  • Help - I've just lost it!!

    I've just lost LabVIEW help. Very confusing. I've been using it all day, I tried to launch help from one of the hyperlinks to a more detailed description in one of the quick help windows (Ctrl+H) and it's gone! I've tried closing LV and restarting it