RFDOPR10 dynamic selection to add customer group field
Hello,
I am trying to add the customer group field in the dynamic selection
option, when running the RFDOPR10 report. I don't seem to find the
option to add the customer group field (KNVV-KDGRP). I tried looking in
the config, but was not able find this report. I also looked for any
OSS notes, but didn't find anything either.
Can anyone please tell me if this possible to do? Thanks.
Ahsan
you have to update all the following routines in program RM07MLBD which load stock
IF BWBST = 'X'.
* select the valuated stocks
PERFORM AKTUELLE_BST_BWBST.
ELSEIF LGBST = 'X'.
* all own stock from storage locations or batches
IF XCHAR = ' '.
PERFORM AKTUELLE_BST_LGBST_MARD.
ELSEIF XCHAR = 'X'.
PERFORM AKTUELLE_BST_LGBST_XCHAR.
ENDIF.
ELSEIF SBBST = 'X'.
* special stocks
CASE SOBKZ.
WHEN 'O'.
PERFORM AKTUELLE_BST_SBBST_O.
WHEN 'V' OR 'W'.
PERFORM AKTUELLE_BST_SBBST_V_W.
WHEN 'K' OR 'M'.
PERFORM AKTUELLE_BST_SBBST_K_M.
WHEN 'Q'.
PERFORM AKTUELLE_BST_SBBST_Q.
WHEN 'E'.
PERFORM AKTUELLE_BST_SBBST_E.
WHEN OTHERS.
* Angegebener Sonderbestand nicht vorhanden.
MESSAGE S290.
PERFORM ANFORDERUNGSBILD.
ENDCASE.
ENDIF.
But as material group is in MARA, you could fill a table from MARA using the SELECT-OPTIONS FOR MARA-MAKTL, then update the routine using a FOR ALL ENTRIES OF the result table (if not empty) (you could also use a JOIN with MARA)
Regards
Similar Messages
-
How to add customer group(KNVV-KDGRP)in the standard report?
Dear All,
My customer requirment is that Customer group (KNVV-KDGRP)wise should be run in FBL5N report AND Customer group should be shown in FBL3N report.
how to add customer group in the standard report?
thanking you,
regards,
Rupang shahHi,
This is what I did for FBL5N with a developer because additional fields configuration does include certain tables.
BTE1650 available for FBL5N and add a new field into one of those tables as an append structure and then use a BTE to populate the field for FBL5N.
Hope that this helps
Kind regards -
Sorting and filtering by select-multi person or group field in the list in SharePoint 2013
Hi everybody,
In SharePoint 2013, I have defined a column as "Person or Group" field, which you allow for multiple selections. when I try to sort/filter it by this field in the list. The field doesn't show up in the dropdown. If I changed "Allow multiple
selections" option to "No" by clicking the column name to edit it in "List Settings", the field can show up sort in the dropdown.
How about support sorting and filter by select-multiple "Person or Group" field in sharepoint 2013?
BTW, in SharePoint 2010, it can support this issue no matter what the "Allow multiple selections" option the request is.
Any help would be great!
Thanks,
JodieHi Jodie,
Can you please give this as a try.
To fix the Filter Issue on Assigned To Column. We need to run the following scripts.
The field which allows more than one values or which allows multiple selections. The multi-valued fileds are non-sortable,
non-filterable. Multi-valued fields cannot be indexed
$web=Get-SPWeb
$list=$web.Lists[] $field=$list.Fields[ColumnName] $strSchema=$field.SchemaXml $str=Schema$strSchema.Replace("Sortable=`"FALSE`"","Sortable=`"true`"")
$field.SchemaXml = $strSchema
Krishana Kumar http://www.mosstechnet-kk.com
Thanks for your reply, I have tried to run the scripts, but it still cannot work. The following is my scripts:
$web=Get-SPWeb 'http://cst-server-01'
$list=$.web.Lists["Product Request"]
$field=$list.Fields["Applicant"]
$strSchema=$field.SchemaXml
$str=Schema$strSchema.Replace("Sortable='"FALSE'"", "Sortable='"True'"")
$field.SchemaXml = $strSchema -
Data in Customer Group Field according to the sales area
I have two sales area, i.e. 1000,10,10 (area1) and 1000,20,10. (area2) configured in the sap.
i want that when user creates a customer for area1, then he get different data in list in "customer group field" in sales area in sales tab i.e. group1, group2. and while creating customer for area2 field, user get different data in list of the same field (now group3, group4).
is that possible without ABAP??Hi
The field customer group flows from imgsd-master data-business partners-customers-sales-define customer groups
Whatever you define here will flow as options in F4 while creating CMR
But there is no restriction of limiting certain groups according to sales areas as reqd by you in standards
It needs a development only
Regards
Raja -
How to add into dynamic selection criteria (FBL1N) - custom field from LFB1
Hello all,
i have following problem. I added new customer field into table LFB1 (Z* field). And now i need to use this field as dynamic selection criteria in transaction FBL1N. I enhanced selection view for logical database KDF - i have created new customer view and I added my new field from LFB1. It is OK, i see this field in dynamic selection criteria in FBL1N but if i try to select according that Z* field, short dump occured.
open cursor with hold LC_KRED for select (VF_KRED_FIELDS)
from <b>VF_KRED</b>
where LIFNR in KD_LIFNR
and BUKRS in KD_BUKRS
and LAND1 in KD_LAND1
and KONZS in KD_KONZS
and VBUND in KD_VBUND
and AKONT in KD_AKONT
and BUSAB in KD_BUSAB
and (VF_KRED_WHERE)
Problem is in VF_KRED - this is database view (LFA1 joins LFB1). This view has no Z* fields and therefore it cannot be use in statement above -> dump.
Is needed repature of standard - enhancement of view VF_KRED?
Thank you very much.Hi guys,
thanks so far. I managed to show prompts in the report. But still my problem is nor 100% solved
I would like t achieve that the filtered criteria in the report title is separated through a comma like in the report filter summary - e.g.: {001, 002, 003, 004} followed by just 1chart/table that is including the whole information.
When I however just drag a variable into the report it automatically created different sections, right? Like ........ table, chart, whatever... .......table chart whatever........
Regards -
Select Button beside custom metadata field on Check In Form
Hi
In Oracle Content Server 10gR3, is there a way to add a "Select" button to User Alias Applet for a new Meta data field on New Check In Form? I tried creating a component but I don't see a select button being shown up. The button does shows up if it's a standard metadata fields but not for the custom one. Here is the component code. Any idea what I am doing wrong and how to fix it.
<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
CustomMetaData htmlIncludeOrString
</title>
</head>
<body>
<@dynamichtml std_meta_fields@>
<textarea name="xClbraAliasList" rows=3 cols=40 wrap=virtual></textarea>
<input type="button" value="Select..."
onClick="popupSelectAlias(document.Checkin);">
<script language="JavaScript">
var aliasForm;
function popupSelectAlias(frm)
var selUser = document.selectAliasApplet;
aliasForm = frm;
selUser.createFrame();
function setAliasString(val)
if (val.length == 0)
return;
var str = aliasForm.xClbraAliasList.value;
str.trim;
if (str.length > 0)
str += ",";
str += val;
aliasForm.xClbraAliasList.value=str;
</script>
<applet name="selectUserApplet"
code=com.intranetsol.utilities.SelectUserApplet.class
codebase="/idc/common/"
archive=suapplet.zip
id=selectUser
width=0
height=0
MAYSCRIPT>
<param name=CGI-URL value="/idc/idcplg">
<param name=JsDisplaySeparator value=",">
<param name=IsPaged value="1">
<param name=IsUserList value="1">
<param name=JsFunction value="setUserString">
</applet>
<applet name="selectAliasApplet"
code=com.intranetsol.utilities.SelectUserApplet.class
codebase="/idc/common/"
archive=suapplet.zip
id=selectAlias
width=0
height=0
MAYSCRIPT>
<param name=CGI-URL value="/idc/idcplg">
<param name=JsDisplaySeparator value=",">
<param name=IsPaged value="1">
<param name=IsAliasList value="1">
<param name=JsFunction value="setAliasString">
</applet>
<@end@>
</body></html>
Then I tried using the same code as above but instead used the built-in dDocType to show a "Select" button. This works but the button obviously shows besides dDocType but when I try for custom metadata as shown above it doesn't. Here is the sample code for dDocType:<html>
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8">
<title>
CustomMetaData3 htmlIncludeOrString
</title>
</head>
<body>
<@dynamichtml std_doc_page_definitions@>
<$include super.std_doc_page_definitions$>
<$include custom_modify_comments_definitions$>
<@end@>
<@dynamichtml custom_modify_comments_definitions@>
<$if isCheckin$>
<$xComments:isHidden = 1$>
<$xComments = "some preset and hidden comments"$>
<$elseif isUpdate$>
<$xComments:isInfoOnly = 1$>
<$endif$>
<@end@>
<@dynamichtml compute_std_field_includes@>
<$include super.compute_std_field_includes$>
<$if fieldName like "dDocType"$>
<$if isCheckin or isUpdate$>
<$fieldEntryInclude = "custom_doc_type_popup_field_entry"$>
<$endif$>
<$endif$>
<@end@>
<@dynamichtml custom_doc_type_popup_field_entry@>
<input type="text" name="dDocType" value="<$fieldValue$>">
<input type="button" value="Select..."
onClick="popupSelectAlias(document.Checkin);">
<script language="JavaScript">
var aliasForm;
function popupSelectAlias(frm)
var selUser = document.selectAliasApplet;
aliasForm = frm;
selUser.createFrame();
function setAliasString(val)
if (val.length == 0)
return;
var str = aliasForm.xClbraAliasList.value;
str.trim;
if (str.length > 0)
str += ",";
str += val;
aliasForm.xClbraAliasList.value=str;
</script>
<applet name="selectAliasApplet"
code=com.intranetsol.utilities.SelectUserApplet.class
codebase="/idc/common/"
archive=suapplet.zip
id=selectAlias
width=0
height=0
MAYSCRIPT>
<param name=CGI-URL value="/idc/idcplg">
<param name=JsDisplaySeparator value=",">
<param name=IsPaged value="1">
<param name=IsAliasList value="1">
<param name=JsFunction value="setAliasString">
</applet>
<@end@>
</body>
</html>
Can someone please let me know what is in my above code that I am missing that is preventing the button not being shown in-front of the custom metadata field.
Any help would be greatly appreciated.
Thanks
Edited by: guest0012 on Aug 29, 2009 4:24 PMInteresting!
You'll need a component. You already mentioned you had a custom metadata field. You will also need to add a counter to the counters table for your component. During a check in you will need to fetch the next value from the counters table, increment the counter and store the new number back in the table. The year portion of the id is easy, get the current year and grab the last two characters. Then, put this all togther to get the data for your metadata field.
The big question now is where in the check in process will you do all this? You will need something called filters probably. Maybe addFiles, maybe validateStandard, there are several that this could work with.
Check out the how-to-components:
http://www.oracle.com/technology/products/content-management/ucm/samples/index.html
-Jason
http://www.corecontentonly.com -
Dynamic selection screen for custom ABAP report
Hi,
His it possible to create a custom ABAP report with a dynamic selection screen. The report doesnot use a logical database. If possible sample code will be appreciated.
Regards,
Chandra Kumarhi
use this link
Dynamic selection screen
Cheers
Snehi -
How to Add Customer Class Field in WEB-IC
Hi CRM Experts,
Please provide me Solution on folooing queries.
1)When ever i create a BP from WEB-IC, i need to enter Customer Class. Since this field is not available in the standard system i cant enter.
So, Please tell me how to add new filed in the WebIC.
Points will be Rewarded.
Thanks in Advance.
Regards,
SreeHi,
See Thread entitled "Links to CRM Documentation" - there you will find a link to Interaction Center (IC) WebClient Consultants Cookbook. This document gives you all the info you need to add fields to the ICWC.
http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000647973&_SCENARIO=01100035870000000112&_OBJECT=011000358700003057372006E
Regards,
Damien
Please award points... -
Add custom MARC fields in MM41, MM42, MM43?
Hi all,
I need to implement 4 custom fields (aleady appended to MARC) to MM41, MM42, MM43 - I know how to add the new subscreen from the configuration path Logistics General/ Material Master/Configuring the material master (have also read OSS note 44410).
My questions are:
1) Will this configuration work for Articles (as opposed to materials) & what are the differences?
2) Is there a Badi needed to transfer custom fields to MARC in MM41/2/3? I can't find one - the fields only need screen validation and nothing else.
Many thanks in advanceHi,
Please refer the below link.
This is for MM01. I understand that you are into Retail system. Hope the same processing logic can be done in your scenario also.
saptechnical(dot)com(slash)Tutorials(slash)ExitsBADIs(slash)MM(slash)MM01(dot)htm
Replace the bracket words with the correct symbols.
With Regards,
Sumodh.P -
How to add custom user field in search result page
Hi,
I want to display user defined field values in search users result page. For example, I am having USR_UDF_SSN user defined field. Now if i search users, the resultant table should display the default OOTB values (USER ID, FIRST NAME, LAST NAME, STATUS) and USR_UDF_SSN value.
We are using OIM 9.1.
- Kalyan Mutya.You can't add this without having the source code. And on another note, i would highly suggest you DO NOT display a user's SSN unless you are in the HR system. These values should always be encrypted in OIM or you might have some bigger issues of private data being accessible.
-Kevin -
How to add a new Field in the Dynamic Selection screen section.
HI,
There is a requirement in which I need to add a field in existing program of dynamic selections.
I need to add a field KNKK-DBRTG (Customer Rating) in dynamic selections screen of some existing report
which has a dynamic selection screen with other fields like customer account, company code etc. Along with this i need to add Customer rating field also in the selection screen.
I have used GET KNKK statement to select this in the Dynamic selection screen. But I need to make it appear
on the screen.
LDB used is the Customer Database.
I have added GET KNKK statement after GET KNA1 statement.
Can any one help me how we can make this rating field appear in the selection screen.
With the GET statement Credit control area Fields can be selected in the selection screen but I have to permanantly add the field in the selection screen.
Regards
Prashant PrabhuHi,
So you need that this new field have data in old records?
1.- If you are in BI 7.0 and the logic or data for that New field are in the same Dimension, you can use a Remodeling to fill it. I mean if you want if you want to load from a Master Data from other InfoObject in the same Dim.
2.- If condition "1" is not yours.
First add the new field, then create a Backup Cube (both cubes with the new field) and make a full update with all information in the original Cube. The new field willl be empty in both cubes.
Create an UR from BackUp_Cube to Original_Cube with all direct mapping and create a logic in the Start Routine of the UR (modiying the data_package) you can look for the data in the DSO that you often use to load.
To do that both cubes have to be Datasources ( right click on Cube-> aditional function-> and I think is "Extract Datasource")
Hope it helps. Regards, Federico -
Include new field in dynamic selection in fbl1n
Hi Guys,
I want to add a new field in dynamic selection in tcode FBL1N.
Regards,
H.SathiskumarHi Sathiskumar,
Here are general instructions for adding new fields to the dynamic selection:
1) Call Transaction SE36
2) Enter logical database DDF, KDF or SDF (for FBL5N, FBL1N, FLB3N)
3) Menu -> Extras -> selection views
4) Here you can find 2 origins of the view (SAP and CUS).
The standard view SAP is used. Create your own using view CUS. First copy the view SAP.
On the left side are the functional groups.
01 Customer master => fields from table KNA1
02 Company code => fields from table KNB1
03 Documents => fields from table BSID
Only those fields from these tables can be used for dynamic selection
5) To get another field from e.g. table KNB1 for the dynamic selection double click on the right side on
table KNB1. The field in the lower area will be changed. Search for the desired field and enter a 03
in front of the field. Save.
6) Test in your report.
Note: Not every table and field can be used as dynamic selection. It is also necessary that the report
allows selection for that field."
Furthermore I suggest You to have a look at the note number 310886 that can be useful.
Customers: logical database: DDF
Permitted tables:
KNA1, KNB1: All fields are permitted that are contained in the VF_DEBI view. If necessary, you have to
include additional fields in the view fields category using Transaction SE11.
I hope this information may help you in resolving the reported issue.
Regards,
Emoke -
Add Customer Field while posting Journal Entry
BSEG-KUNNR is not exposed while posting journal entry using FB01. It is not available in the field status group also. How to add customer number field in the field status group to make it available during posting journal entry using FB01.
Hi Jac,
1, There is a known issue in a lower version before 2005A SP01 PL30when you try to run a retirement operation for a fixed asset with Net Price equal to the Net Book Value, it failed and you got the following error message:
21141 error while posting journalentry: -5012 /Unbalanced Transaction.
If you are in this scenario, please upgrade your Fixed Assest to the latest patch.
2. If you are not in above scenario, this problem is possibly caused by the incorrect configuration of accounts in G/L
Account Determination.
There should not be 'Default VAT Group' related to these accounts except for account 'Default Revenue Acc. Retirement' in G/L Account Determination.
1) Go to Administration - Setup - Fixed Assets - Open G/L Account Determination;
2) Select an Account Determination Group;
3) Under the G/L Account Determination window, open the account linked to 'Balance Sheet of Asset Acc.' by clicking on the yellow arrow;
3) The Chart of Accounts window will open, click on the'Account Details' button beneath the window to open G/L Account Details;
4) Empty the field 'Default VAT Code';
5) Execute the Retirement functionality again.
You can also refer to SAP Note 1050423 for reference. https://service.sap.com/sap/support/notes/1050423
I hope it is helpful!
Regards,
Ivy Zhang
SAP Business One Forums Team -
Report Painter: How to add new(customer specific) field to CCSS table
Dear Experts,
We have requirement to display the orders based on Profit center or Profit center groups in report painter. So in report library(6O1), we want to add fieild PRCTR or any customer specific field(ZPRCTR) to CCSS table. Could you please let us know how to add field ?
or is possible to add customer specific field(ZPRCTR) in CCSS and link that field to Profit Cetner(PRCTR) and profit center group.
Please help us..
Thanks in advanceYou can check the below OSS notes:-
<https://service.sap.com/sap/support/notes/929889>
<https://service.sap.com/sap/support/notes/522581>
<https://service.sap.com/sap/support/notes/43493>
Regards,
Gaurav -
How to change the text of a user defined field in dynamic selections?
Logical Database PSJ is used by t code CJI3 - we added a couple of user fields into the dynamic selections of CJI3.
Now - how to change the text of this user filed (USR01 of structure PRSP_R in logical database PSJ)?
Found an OSS note - 86980 - that tells that this is not possible.
But when we read the documentation on the user field (CJI3 - dynamic selections - double click on user field - F1), it shows the following text:
User-defined field in which you can enter general information with a length of up to 20 characters.
Dependencies
The names (key words) for user-defined fields depend on the field key.
Now the question is where to change the field key..
Thanks,
VenMadhu - you did not get the question I think.
Anyways - I found an OSS note 1266643 - this code change should take care of the issue - it will then reflect the details maintained in custoizng at transaction code OPS1..
Thanks,
Maybe you are looking for
-
I cannot open any of my Hotmail e-mail messages, delete them, look at other old ones, nothing. All I can do is sign in and that is it. I have tried deleting cookies, clearing the cache space, rebooting the computer, rebooting my internet connection,
-
Ref Char fpr item descrption in BOM
Hi All I want to change the item description in BOM through variant configuration (reference character ). The scenario is in sales order i will be entering the size (lenght and width) this two char should reflect or change the item descrption of the
-
How to change dynamically type of columns in DataTable
Hi I have a dataTable bound to custom object properties. In a column i want to set text type as Link Action or OutputText depending on some criteria. Can this be done. If yes then how.
-
Aperture 2 not loading thumbnails...
...and moving very slow. Recently I was using Aperture 2 (haven't upgraded since I just bought A2 in January) on my Macbook (3 year-old black one running Leopard) and Aperture was running fine, albeit slow since I was trying to edit around 400+ shots
-
When the User Exit USEREXIT_PRICING_PREPARE_TKOMK gets triggered?
Hi All, Could you please let me know when the following user exit gets triggered? USEREXIT_PRICING_PREPARE_TKOMK Is it before the Pricing? or After the pricing? Is it like Pricing uses TKOMK structure for calculating the Pricing?? Please help me....