"BAPI_DOCUMENT_CHECKOUTVIEW2" -not fetching the original to local path ..

Hi,
When i use the function module "BAPI_DOCUMENT_CHECKOUTVIEW2" it is working fine. But i call in my webdynpro application , it is not placing the original to the given path . Plz give me the Solution
Regards,
Rani.

That BAPI uses a SAPGUI connection to the client side to write the data into the local path of the client machine. Of course from Web Dynpro ABAP, you have no connection to the SAPGUI nor would you have access to write directly to the local filesystem of the client machine because of the sandbox nature of web browsers. Many of the BAPI_DOCUMENT_* function modules are structured this way, making them practically unusable from Web Dynpro or ther web environments.
There is a way to make them work "dark" (without SAPGUI) and therefore from Web Dynpro. You have to supply a value for the PF_HTTP_DEST or PF_FTP_DEST. These need to be remote locations that are running the SAPHTTP or SAPFTP applications and the SAP Gateway. Generally these might be the application server of the ABAP system itself. You FTP the files to the application server and write them into a filesystem that is a public share that can be accessed by the client desktop.

Similar Messages

Could not start the oracleoradb10g_home1TNSLISTENER ON local computer

Hi All,
Oracle version---10.2.0
OS---windows xp
i have installed oracle 10gr2 newly.but after that i am not able to start listener.I am getting below error
could not start the oracleoradb10g_home1TNSLISTENER ON local computer
Error 3:The system cannot find the path specified.
Kindly help me out.
Thanks

hi...
kindly find below the content of listener.log file
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-NOV-2009 09:46:53
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Trace information written to C:\oracle\product\10.2.0\db_1\network\trace\listener.trc
Trace level is currently 0
Started with pid=4356
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hp-db940aec9322)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
22-NOV-2009 09:47:03 * service_register * newtest * 0
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-NOV-2009 09:47:15
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Trace information written to C:\oracle\product\10.2.0\db_1\network\trace\listener.trc
Trace level is currently 0
Started with pid=4908
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hp-db940aec9322)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-NOV-2009 09:48:27
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Trace information written to C:\oracle\product\10.2.0\db_1\network\trace\listener.trc
Trace level is currently 0
Started with pid=2640
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hp-db940aec9322)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
22-NOV-2009 09:49:10 * service_register * newtest * 0
22-NOV-2009 09:53:43 * service_update * newtest * 0
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-NOV-2009 09:55:03
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Trace information written to C:\oracle\product\10.2.0\db_1\network\trace\listener.trc
Trace level is currently 0
Started with pid=4420
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hp-db940aec9322)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE
TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Production on 22-NOV-2009 09:56:14
Copyright (c) 1991, 2005, Oracle. All rights reserved.
System parameter file is C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
Log messages written to C:\oracle\product\10.2.0\db_1\network\log\listener.log
Trace information written to C:\oracle\product\10.2.0\db_1\network\trace\listener.trc
Trace level is currently 0
Started with pid=5032
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROC1ipc)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=hp-db940aec9322)(PORT=1521)))
Listener completed notification to CRS on start
TIMESTAMP * CONNECT DATA [* PROTOCOL INFO] * EVENT [* SID] * RETURN CODE

CS5 The selected file cannot be linked because its type (audio) does not match the original file's t

Greetings,
I have been working on a very large project using CS5 on my desktop computer. Now I am on the road and bought a laptop so that I can continue to work. I placed all of my assets on a back-up external 2tb drive (which I was able to open without incident on my desktop). I installed CS5 on my new laptop and now when I try to open the project I get the following message "The selected file cannot be linked because its type (audio) does not match the original file's type (audio and video)". This message appears before I indicate the path to any of the assets. Then, when I do indicate the path to each asset, I get the same message for individual files.
Any advice is appreciated.
Thanks,
Jeremy

I had this problem and have found a solution / workaround: my issue was when trying to open a cs5 project that had been collected on mac and then transfered to pc, my footage was all png image sequences but this will hopefully work in other situations...
Open the project and cancel the first dialogue box that pops up where you get the "file cannot be linked" error when trying to reconnect footage. The project will open and then in the project panel, right click on any footage that needs reconnected and choose "Replace footage..." this will open a dialog that will allow you to select the file that gave you the error in the first place without any issues. Any sequences with that footage will now work and everything show be all good.
You may experience "Offline material is present in this export and will be encoded using the offline media graphic" on first export but apparently you can just ingore that, but i guess it's woth testing a few short sections before commiting to a huge render...
This workaround isn't perfect as i had about 50 pieces of footage i had to relink via this method one by one but at least it saved redoing the edit which was critical for my project...
good luck!

Remove the data which is recently loaded, but not disturbing the original

Hello Experts!!
I have few tables in Oracle 9i/10g , and they already have data in them. I am trying to migrate the data coming from variuos source systems into these Oracle tables. There is a chance that after loading I might get some unwanted data into these tables.
How do I remove just that data which I have loaded recently, and do not distrub the original data it already has.
Lot of people have adviced me to backup those tables and reload the data back if there is any problem, but I am looking at a different approach. I just dont want to change the existing system, as lot of users use the system.
Could anyone help me solving this issue.
Thanks,
Vishal

Visu wrote:
How are you loading the data daily? Is it direct path?
1) Capture the primary key or rowid information into interim table while loading data into target table (either trigger or stored procedure) - triggers will not be fired if the load is direct path, it is the feasible way otherwise as there will be no impact on the existing codeThat's not true. The trigger will disable the direct path, not the other way around.
Simple proof.
TUBBY_TUBBZ?create table for_direct_pathery
2 (
3     column1 number
4 );
Table created.
Elapsed: 00:00:00.07
TUBBY_TUBBZ?
TUBBY_TUBBZ?insert --+ APPEND
2 into for_direct_pathery
3 select 1 from dual ;
1 row created.
Elapsed: 00:00:00.00
TUBBY_TUBBZ?
TUBBY_TUBBZ?select * from for_direct_pathery;
select * from for_direct_pathery
ERROR at line 1:
ORA-12838: cannot read/modify an object after modifying it in parallel
Elapsed: 00:00:00.01
TUBBY_TUBBZ?
TUBBY_TUBBZ?rollback;
Rollback complete.
Elapsed: 00:00:00.00
TUBBY_TUBBZ?
TUBBY_TUBBZ?create or replace trigger disable_direct_path_access
2 before insert on for_direct_pathery
3 begin
4     null;
5 end;
6 /
Trigger created.
Elapsed: 00:00:00.09
TUBBY_TUBBZ?
TUBBY_TUBBZ?insert --+ APPEND
2 into for_direct_pathery
3 select 1 from dual ;
1 row created.
Elapsed: 00:00:00.00
TUBBY_TUBBZ?
TUBBY_TUBBZ?select * from for_direct_pathery;
           COLUMN1
                 1
1 row selected.
Elapsed: 00:00:00.00
TUBBY_TUBBZ?Notice how you can select the table (since it wasn't direct path loaded) when the trigger is in place.

Selected file cannot be linked because its type (video) does not match the original file's type

I've been using Premiere Elements 9 for a couple of years now, and a few months ago I began having problems importing AVI files created from a BlackMagic Intensity Pro capture card. (These issues were not previously occurring, and since they surfaced, I have exhausted the various settings for the BlackMagic card, used various software such as BlackMagic's own Media Express as well as the freeware VirtualDub, and still have the following problems.)
In addition, these AVI files play just fine, in their entirety, using Windows Media Player and in Quicktime.
The problem (or possibly two, but I suspect they could be related) is that most of the AVI files I attempt to import will either (1) import all video and NO audio, or (2) import ONLY a short segment of audio and video, and the length that Elements imports varies. Usually only in the range of a minute or two. The rest of the file is not imported at all.
After much digging in forums, and testing various settings in trying to figure out the issue, I decided to back up all of my files and completely wipe all hard drives and start over with a fresh installation of Windows and Premiere Elements 9. I haven't installed much else yet, as I wanted to first find out if the reinstallation improved things with Elements.
For the first project I created in Elements after the reinstallation, Elements successfully imported an entire AVI that was nearly 2 hours long, audio and video. This was a file that previously would not import properly into Elements. This suggested that my earlier installation of Elements must have been corrupted somehow. At this point I was very hopeful that all was well.
I proceeded to edit the video as I had wanted, saved the project, and exported it to an MPEG format file. I had originally wanted to export it as an MOV, but I hadn't yet installed Quicktime, so Elements couldn't do that just yet. The MPEG export was successful and plays fine.
However, I then installed Quicktime, and once it was finished, I restarted the PC and reloaded the same project. This time, Elements claimed the media was offline. I double-clicked on a segment of the video, and directed Elements to the raw file, but then an error message popped up: "The selected file cannot be linked because its type (video) does not match the original file's type (audio and video)." This was the same file I had JUST edited and of which I created an MPEG.
I tried creating a new project and the "Get Media" function to import the AVI again, but this time only the video imported with NO audio. (This would explain why the error message said what it did, but not why the audio wasn't imported.)
What in the world is going on with Elements??? I am baffled since the ONLY task I have done on this machine after a complete reinstallation of both Windows and Elements is edit one AVI. I find it very hard to believe that just installing Quicktime caused this.
Some info on my system:
System: Asus P6T w/ Intel i7 920 and 12 GB memory
OS: Windows 7 Ultimate
Video Software: Premiere Elements 9
Capture Card: BlackMagic Intensity Pro (PCI-e)
Capture Software: AVIs recorded with either BlackMagic Media Express or VirtualDub (only prior to the reinstallation, as neither of these programs are currently installed)
I'm getting to the point with Elements that I might need to just abandon it and find something else that is more reliable. Anybody have suggestions to help with this, so I won't have to migrate?

mtnsports
We think that we need to start off with definiting the properties of these .avi files that you are importing into Premiere Elements 9.0/9.0.1 (assumed that you are working for the required 9.0.1 Update).
You say that the "avi" was created from a "BlackMagic Intensity Pro capture card". What are the properties of this .avi that you imported into Premiere Elements? Not all .avi are created equal. What is the video and audio compression, frame size, frame rate, interlaced or progressive, pixel aspect ratio, typical duration?
Based on the properties of the video what have you been setting as the project preset?
Let us start here.
More later.
ATR

Report is not fetching the data from Aggregate..

Hi All,
I am facing the problem in aggregates..
For example when i am running the report using Tcode RSRT2, the BW report is not fetching the data from Aggregates.. instead going into the aggregate it is scanning whole cube Data....
FYI.. Checked the characteristcis is exactely matching with aggregates..
and also it is giving the message as:
<b>Characteristic 0G_CWWPTY is compressed but is not in the aggregate/query</b>
Can some body explain me about this error message.. pls let me know solution asap..
Thankyou in advance.
With regards,
Hari

Hi
Deactivate the aggregates and then rebuild the indexes and then activate the aggregates again.
GTR

I tried to copy my iPhoto library to a second external drive and now the pgm, running on an iBook with 10.5.8 does not open the original library on launching?

Hi Guys, I copied my iPhoto library to a second external disk. Now my version of iPhoto (5.0.4) does not display the original library on the orignal external drive. I have reinstalled the iPhoto and it seems to make 2 attempts to find the library but fails. The iPhoto menu bar is available but does not function. The screen is blank. Any help appreciated,
Gethin

Are you indicating that you don't get this window when you hold down the Option key while launching iPhoto?
What do you mean by "nothing happens". What library opens when you launch iPhoto normally?
OT

I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.

Archive files are in XML format and not in the original format

Hi all,
I am using a receiver file adapter with archiving option. When I look at the archive files they are in the XML converted format and not in the original flat file format received. We would like to store these files for audit purpose and it doesnt make sense to store XML files. We are in SP04. Does a note need to be applied or any other extra configurations need to be done which I might have missed? Please advise.
-Teresa

Hi,
>>>Wow, the note says its fixed in SP10
but only the split is fixed not the XML messages in the archive I think (from the note)
>>>Is there any alternative quick fix and I hate manual work
create 2 new folders - connect one of them with the file adapter and the second one remains for archives
in you normal destination folder for your files add a simple program that will check if there are any files and copy them to those two folders - this could be the fastes but obviously not the best solution I guess
Regards,
michal

When I right-click a link to open in another tab, the new tab opens not in the original window but in the first firefox window of the session

when I right-click a link to open in another tab, the new tab opens not in the original window but in the first Firefox window of the session.
I deleted sessionstore.js from the profile and restarted Firefox but that did not help

Sounds like this bug:
* [https://bugzilla.mozilla.org/show_bug.cgi?id=644729 bug 644729] - Popup window with all toolbars visible causes new tabs to open in another browser window
''(please do not comment in bug reports; you can vote instead)''

Query not fetched the record

Hello,
Could someone help me please ?
I have a listing of my sales orders and I want to make changes in my order by opening the form and fetched with that record. When I click on that particular orderno in my listing of order and call the form to display the details, it calls the form but says "Query could not fetch the record". I do not know why ? Please help me with the solution.
Thanx

Hello,
I think you are passing orderno to called form as a parameter. If you are using parameter list check..
1. If parameter data is getting in form correctly ?
2. Next, have you changed where clause of other block,so that is will display record with passed orderno ?
I am expecting more details from you.
Thanx
Adi

I need help in reinstalling photoshop.I do not have the original disk. How can i reinstall PS?

I need help in reinstalling photoshop.I do not have the original disk. How can i reinstall PS?

Which full scale version of PS do you need?
Nancy O.

RSBBS jump query not fetching the document no in R3

Dear Gurus
With RSBBS transcation jump is given to R3 tansaction FB03. When query is executed and with right click go to option and with display document (FB03) its fetching the document no in DEVELOPMENT server . But when the query is transported to Production its not fetching the document no.
Kindly do the needful at the earliest
Regards,
R.Satish

Hi
You said it is not fetching the doc no. Is it failing and showing some error?
Have all the pre-requisite settings been done via Tcode SICF.
Regards
Nageswara

KEYNOTE: Why change the format of the presentations? not respect the original format!

Why change the format of the presentations? Keynote not respect the original format!
This new versionof Keynot (6.1-1769) is very poor:
is very slow
missing fonts
changes the selected letters
change the formats of the presentations
Carousel animations missing
Please correct the defects before releasing a new version. (The previous version was much better).

Found the solution!
I must set the Formats in the CODEC to get the Format that I want to play with! I was trying to complicate too much!
The correct format class to is RGBFormat.
RGB

I want to sell my MBP. How do I completely erase my 2007, 17-inch Macbook Pro that is currently running Snow Leopard. I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE BOX ANYMORE.

I want to sell off my old MacBook Pro and do not want any of my old stuff on it for the next person to fool around with. I'd like a clean-slate for the next guy/gal. It's a 17-inch that I purchased back in '07. It is currently running Snow Leopard after I installed it myself about two years ago. I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.

raeusebio32 wrote:
I DO NOT HAVE THE ORIGINAL DISK THAT CAME WITH THE LAPTOP IN THE BOX.
No problem, stick in your 10.6.3 Snow Leopard retail disk you used to upgrade from 10.4/10.5 with
If you don't have this disk anymore, you can order one online at Apple.com for $29, they don't sell it in the physical stores.
http://store.apple.com/us/product/MC573Z/A
Reboot holding the c or option key down to boot from the disk, select Disk Utility from under the Utilities menu on the second screen (first is language selection)
Now select your boot drive on the left with the drive makers name and disk size and click Erase > Security Option > Zero All Data and click Erase
It will take some time to complete as it's making sure all your personal data if not easily recoverable off the drive using software.
Now quit and you will be back in the installer window, install 10.6 and it will reboot to the "Welcome Video" you can choose to press the power button down and do a hard shutdown, the computer will boot again to this video for the next owner.
If you need even more security in your data deletion efforts I suggest you read this
How do I securely delete data from the machine?

"BAPI_DOCUMENT_CHECKOUTVIEW2" -not fetching the original to local path ..

Similar Messages

Maybe you are looking for