BAPI fields not available

Hi,
I have to create material using BAPI_MATERIAL_SAVEDATA.
I have to upload 3 fields which are not availabe in BAPI Interface.
The fields are
PSTAT Maintenance status,
KLART Class type
CLASS Class Number
I did not find the 3 fields in the MM03 Transaction. Can you tell me where can i find them.
Can you help me how to upload the data to these fields through BAPI.
Thanks & Regards,
Rajender.
Edited by: Rajender K on Mar 27, 2008 8:19 AM

The 2 functions I mentioned are used to upload the definition of the classification.
To assign values to it, you have to use 'BAPI_OBJCL_CREATE' .
CALL FUNCTION 'BAPI_OBJCL_CREATE'
     EXPORTING
       objectkeynew          = lv_objnum
       objecttablenew        = 'MARA'
       classnumnew           = lv_class
       classtypenew          = lv_type
     TABLES
       allocvalueschar       = lt_values
       return                = lt_return.

Similar Messages

  • Contract: Sold/Ship-to-Party fields not available

    Hi Experts,
    I created a new Contract Type in one client A, copying the contract type settings from another client B.  The config in client B is working.  However, when I try testing my new Contract Type in client A, the Sold/Ship-to-Party fields not available (greyed out).
    What config did I miss?
    Thanks!

    Dear January,
    This may due to partner determination settings for that sales document type.So please go through this IMG path do the proper settings then try.
    IMG>Sales and Distribution>Basic functions>Partner determination>setup partner determination-->
    Set Up Partner Determination for Sales Document Header
    Set Up Partner Determination for Sales Document Item
    Check these settings
    Partner Functions in Procedure
    Partner Determination Procedure Assignment
    Partner Functions
    Account Groups - Function Assignment
    I hope this will help you,
    Regards,
    Murali.

  • Contract Currency Field not available for input

    Dear experts,
    I am configuring RE-FX in SAP ECC 6.0 and when i try to create a contract with a currency different from the company code local currency, the contract currency field is not available for input even though in the field status, it is checked as available for input. I want to be able to use a currency for my contracts different from my local currency. Also, havent yet made any changes to the standard field status settings.
    Any kind of advice would be appreciated
    Many thanks

    Hi Severina,
    different currencies for RE-FX are introduced with Enhancement Package 2. Therefore you have to implement this enhancement package and activate the business function for Real Estate and the appropriate subfunction to be able to use different currencies.
    Hope that this information is helpful for you.
    Regards, Franz

  • SQL Expression Fields - Not available

    Post Author: anandad
    CA Forum: Data Connectivity and SQL
    Hi,
    I have installed Crystal Reports XI Developer version but in my Field Explorer I dont see SQL Expression Fields tab or item. Did I miss installing any perticular component? I can see the formulla fields but not SQL Expression Fields....
    Urgent help will be highly appritiated.
    Thanks.

    Post Author: synapsevampire
    CA Forum: Data Connectivity and SQL
    V361 is mistaken, SQL Expression fields are available in CRXI.
    As with previous versions though, it turns off depending upon the type of database and connectivity used.
    Try using a real SQL database, or if MS Access, set up an ODBC connection to the database.
    In the future include your database in your post to avoid guess work on our part.
    -k

  • Key field not available in report

    Hi,
    I have a DSO and in that I have 1 key field and 20 data fields.
    I was able to load the data successfully in the DSO. And I am creating a report based on this DSO.
    But when I create a report, I was unable to view the key field in the report.
    I went to the query designer and checked, I could not see that particular key field also in my query designer, I could only see the data fields.
    Could someone please guide me in this regard???
    Would definitely assign points for the solution...
    Thanks & Regards.

    Hi,
    Please uncheck the Attribute only check box in the General tab of that Keyfield info Object.
    If any info Object checked as Attribute only then those objects wont display in the Query Designer.
    dont forget to give me the points..
    thanks,
    CK

  • VisualReportsSaveCube project 2013 user defined fields not available

    Hi all,
    when buildung the cube without vb I can access all userdefined fields in the report.7
    When I use the VisualReportsSaveCube method no userdefined fields are in the cube. What is going wrong?
    Goal is to build an Excelreport showing Resource Utilization over time with some userdefined fields for filtering.
    Sub SaveCube_Quarters()
    Dim tf As Boolean
    strNamePath = "e:\Daten\ph_Dokumente\01_Projektverwaltung\Kunden_Notebook\Bartsch\"
    strCubeName = "RessourceEinsatzBartsch_Quartale.cub"
    tf = Application.VisualReportsSaveCube(strNamePath & strCubeName, pjResourceTP, ReportAlLFields = False, pjLevelQuarters)
    End Sub
    Hopefully waiting for some advices, Peter
    3/31/2015 nobody an idea, is nobody working with visuel reports ?

    None of this (U_%)is availabe in Crystal
    CREATE TABLE [dbo].[OINV](
         [DocEntry] [int] NOT NULL,
         [DocNum] [int] NOT NULL,
         [DocType] [char](1) NULL,
         [CANCELED] [char](1) NULL,
         [U_AwizData] [datetime] NULL,
         [U_Cars] [nvarchar](max) NULL,
         [U_InstNad] [nvarchar](max) NULL,
         [U_dowod] [nvarchar](max) NULL,
         [U_Status] [nvarchar](max) NULL,
         [U_AwizGodz] [nvarchar](max) NULL,
         [U_Code11] [nvarchar](max) NULL,
         [U_nazwisko] [nvarchar](max) NULL,
         [U_Transport] [nvarchar](max) NULL,
         [U_wystawil] [nvarchar](max) NULL,
         [U_Print] [nvarchar](max) NULL,
         [U_Driver [nvarchar](max) NULL,
         [U_DataTabeli] [datetime] NULL,
         [U_WN] [nvarchar](max) NULL,
         [U_WB] [nvarchar](max) NULL,
         [U_TranspEkovit] [nvarchar](max) NULL,
         [U_KontoBank] [nvarchar](max) NULL,
         [U_nazwabank] [nvarchar](max) NULL,
         [U_palet] [nvarchar](max) NULL,
         [U_tacek] [nvarchar](max) NULL,
         [U_ecoddoc] [nvarchar](max) NULL,
         [U_ecoddate] [datetime] NULL,
         [U_swift] [nvarchar](max) NULL,

  • Goods recipient field not available when creating a service purchase req

    We are trying to create a release strategy for purchase requisitions with acount assignments K, F and P.  The release strategy would use the requisitioner and goods recipient fields to determine the release group.  The issue is when creating a purchase req with item category D for any account assignment, the recipient field cannot be populated.  It is greyed out.  I tried setting the field as mandatory in the IMG at the account assignment level but it doesn't prompt me for a recipient if item category D is entered.  Is there a way to allow this field to be populated?  I don't care if the value is transferred to the purchase order but I need it populated to determine the appropriate release strategy.  We are not using workflow so that is not an option.  Any suggestions would be appreciated.

    Srinivas, I appreciate the response but the requisitioner field is not the problem.  I can set that field to mandatory.  The issue is I cannot populate the recipient field that's located on the account assignment tab of the purchase req.  The recipient field can be populated if the item category field is blank but as soon as I populate the item category with D for service, the recipient field is unavailable.  Is there a way to populate this field when the item category is D?

  • Chart Expert - Why are some formula fields not available?

    I have a report where I had to do Running Totals with formulas.  Following what I learned long ago from the documentation, I laid in my formulas, and then setup some "Display" formulas to print out the results at the end of my report.
    Now I am adding a chart to show a sort of 'summarized' version of the report - its a simple Pie chart...
    But when I go into the Chart Expert and want to select those Display formula fields (there are 4 of them) - they do not appear in the list?
    FYI - These four Display formulas are in the Report Footer of the report, and my chart is in the Report Header. 
    Why do some of my formula fields appear in the Chart Expert "select field" list - while others do not?
    I checked the documentation on this, but it is very "lite" and does not indicate why this might be...
    Any help is most appreciated!

    Read again -  "Problem has been circumvented" NOT "worked around".  In other words, when you pay a fortune for a poorly documented piece of software and you are dependent on answers from a Forum, where at times no one answers your question(s) and your boss is shouting at you as to how you selected such a lousy piece of software with such "lite" documentation and is hardly going to pay any more money for a support call to answer a simple question that should have been covered (and then some) in the documentation, (let alone support of the problem) - you CIRCUMVENT, i.e. give up and find some other way to do what you were trying to do.
    Hence, problem circumvented, NOT worked around.
    Thanks for asking - here's 10 points for your efforts.

  • Why can you create and not edit a form in Forms Central with fields not available in Adobe Pro

    I have developed a form in Adobe pro which I want to use the extra fields that are available in Form Central such as ranking. I can create a form with these extra fields but cannot edit it once saved. Whats the trick?

    Hi;
    This FAQ describes how to further edit your FormsCentral PDF form in Adobe Acrobat: http://forums.adobe.com/docs/DOC-3661
    Thanks,
    Josh

  • Dependent field not available on page load

    I have a form on my website to that uses java script to map dependent values. If I set the first value on page load, the values in the second field aren't available. If I cycle the first field, the scripting runs and the dependent options are available.
    The dropdowns work when the first is pre-selected in IE and Safari, this is causing problems for our Firefox users.

    Try posting at the Web Development / Standards Evangelism forum at MozillaZine. The helpers over there are more knowledgeable about web page development issues with Firefox. <br />
    http://forums.mozillazine.org/viewforum.php?f=25 <br />
    You'll need to register and login to be able to post in that forum.

  • Vendor Field not available for Tax Condition

    Hello Gurus
    We have created a new pricing condition type  to capture the Taxes
    Condition Class: A( Taxes)
    Calculation Type : A (Percentage)
    Cond Category: D(Tax)
    When i used this condition in PO and select the details of the conditions i can't find the field (vendor-lifnr) in the condition type at all.
    When i checked the same for Frieght ( FRB1) in the condition type detials i can see the vendor which i can even change.\
    Is it not possble  to have vendor field when i have taxes condition class? If not how can i bring this into my condition type details screen
    regards
    mohammed

    Thanks for you speedy reply ,
    We wanted to post this TAX condition to a different vendor than the vendor of the PO. in my condition i did not see the field VENDOR, how can i get this feild VENDOR in this condition details.
    Regard
    Mohammed

  • BDT : fields not available

    Hi Experts,
                I need some urgent help regarding BDT.
    I am trying to add some custom fields in BP transaction.
    I have done the following steps:
    1. Added a Z fields in table BUT000 under include CI_EEW_BUT000.
    2. I created a field group '601' and under that I added my new fields.
    3. I created a new screen, two function modules Z_XXXX_PBO and Z_XXXX_PAI in a same function group.
    In FM Z_XXXX_PBO  i called FM BUP_BUPA_BUT000_GET.
    In FM Z_XXXX_PAI i called FM BUP_BUPA_BUT000_COLLECT.
    In the flow logic of screen under PBO i called FM BUS_PBO.
    And under PAI i called FM BUS_PAI.
    I created a view then with Application as 'BUP' , Differentiation type as 0,
    and Data set as BUP010.
    I defined the program name and screen number of the screen,
    then then both the FM  in PBO and PAI.
    4. Next I created a section ,
    5. Then Screen,
    6.Then Screen Sequence.
    7. Lastly I generated the screen with BUSP.
    After all these steps I could see a additional tab on the screen but could not view any fields on that tab.
    Please suggest me where could be the problem.
    Any one who has generated screen with BDT in BP transaction can help me out with the steps.
    I would be really thankful to you ..
    regards
    Sourabh Verma

    Hi,
    Go to the transaction BUSD.Assign the relevant dataset and calling application for Business Partner (General) or the role for which you want this field group to be displayed.
    Next,
    Go to the transaction SPRO. Follow the path
    Cross-Application components -> SAP Business Partner -> Business Partner -> Basic settings -> Field Groupings -> Configure field attributes per client.
    Click on BUPA. Now choose the the particular field group and choose the correct radio button.
    Thanks and warm regards,
    Smita.

  • F4Help for selection fields not available

    Hello Friends,
    I have created a datasource in Bi7.0 .while creating this i have put selection option X(selection possible) and Selection option 3(EQ & BT) for the three characteristics in the datasource and activated it.
    When i am creating the Infopackage for loading the data to PSA, with in infopackage in Data selection tab, when i am selecting the characteristic value for the above chars, the system says "Datasource does not exist in the source system of version A"
    Why am i not able to select the values here?
    Please let me know friends if you have any idea?
    Thanks
    mv_d

    Hi Friends,
    Does anyone have any idea what could be going wrong in this case?
    Why am i not getting F4 help values in Infopackage?
    Thanks
    mv_d

  • SAP templates use BAPIs not available in 4.7

    We are trying to use the SAP module library templates for PP - We are running 4.7 and do not have access to BAPIs BAPI_PRODORD_GET_LIST or BAPI_PRODORD_GET_DETAIL, two of the BAPIs used in that template.
    Any suggestions or help would be appreciated.
    Thanks

    If these BAPIs were not available in 4.7, then you would probably have to create them.  But I was pretty sure the Production Order BAPIs were in existence then.  You may want to post on a different board when some more savvy ECC folks would chime in.  Are you sure you don't need the Process Order BAPIs?   For BAPI_PROCORD_GET_LIST and its fellows were not released until ECC 5.5 (I think).
    Regards  and Good luck!
    Mike

  • Custom Field not showing in analytics?

    We have a custom field on the account object called sales stage. It is a simple pick list (our organization does not use the opportunity object). The custom field is not available in analytics. Is there something on the field setup that needs to be flagged? All of our other fields seem to appear just fine. This is so bizzarre!!
    Any help is greatly appreciated.

    Hm. Still no answers.
    We have a similar problem concerning custom fields not available in Answers. It concerns a custom field for an additional tel no. in the user record type. I thought it might have something to do with the fact that it can only be utilized through the other data types, using "owned by user".
    But as you have the same problem, maybe there is a solution... Any idea would be appreciated.

Maybe you are looking for