BAPI/FM for creation of CONTACT RECORD for the contract account

Hi All,
I need to create a contact record for the a contract account.
The contact record details will be maintained in the table BCONT.
Let me know if there is a function module/BAPI/any othere way to create a contact record.
Regards
Shiva

Hi,
You can use the function module - BCONTACT_CREATE to create Contact record
(or)
make a BDC of the Tcode - BCT1(Contact creation) and use the same for creation of contacts in batch
Note: Contact is created against Business Partner and not Contract Account. So you will have to include your logic of finding out the respective Business Partner for the Contract Account for which you need to create Contact record.
regards
Gagan

Similar Messages

ADOBE usage for creation of MDM record

Hi,
I need to present a DEMO on usage of _ADOBE form for creation of Master data record in MDM_.
Request if you could please send me some presentation / link or a process movie detailing the above action.
Regards,
Rajeev

Hi,
You can use the function module - BCONTACT_CREATE to create Contact record
(or)
make a BDC of the Tcode - BCT1(Contact creation) and use the same for creation of contacts in batch
Note: Contact is created against Business Partner and not Contract Account. So you will have to include your logic of finding out the respective Business Partner for the Contract Account for which you need to create Contact record.
regards
Gagan

Error during creation of info record for pipline material.(Urgent)

Hi All,
We are getting the following error during creation of Info record for pipeline material
" Material XXXXX is not a pipline material"
we have checked the material master and found it is a pipeline material.
Kindly advice on the same.
Help in any form will be rewarded.
Best Regards
Arihanth

Hi Arahanth,
The steps u need to check are;
1) The Material Type ( If standard then it is PIPE or if defined own Material Type check the settings once preferably in special material type a tick at pipeline mandatory)
2) when u create the info record (ME11) ensure the info category is selected as pipeline.
Hope its clear to u
if solved do reward me points
Regards
Anil Thai

Record for spouse overlaps with record for domestic partner

Hi Experts
When we are creating Spouse record we are getting following error in portal.
"Record for spouse overlaps with record for domestic partner"
I have deleted the Plans for Domestic Partner and I have deleted the Domestic Partner from Portal and after that I am trying to create the spouse. I could able to create spouse in BACK END system (HCM) after I deleted the Domestic Partner from portal. But I can't able to create Domestic Partner from the Portal.
If I delete DP instead of Delimit from the backend I could able to create the Spouse from portal. But If I Delimit I can't create the record from Portal.
Could you please suggest us.
Thanks
Sowmya

You cant overlap these records you need to use differnt subtype

Anyone else experience the contact information for a blocked contact appearing at the top of the screen, when you open your email?

Has anyone else experienced contact information for a blocked contact, appearing at the top of your email screen when opening your email?

I'm seeing this as well, but not everytime only evry so often. No idea why.

How do I delete an iCloud account from my iPad that I no longer know the password for and have no access to the email account to change it?

How do I delete an iCloud account from my iPad that I no longer know the password for and have no access to the email account to change it?

You will need the password. If you can't get it reset via http://iforgot.apple.com (if you remember the answers to the account's security questions then you should be able to reset it via them) then try contacting Support in your country, they should be able to reset it.
Contacting Apple about account security : http://support.apple.com/kb/HT569
If your country isn't on that page then try this form and explain and see what they reply with : https://ssl.apple.com/emea/support/itunes/contact.html

How to Restrict Creation of Infotype Record for Certain Org Units?

Dear All,
Requirement:
Org Unit 1 does not have overtime. Even the employee works overtime, they will not get overtime compensation.
One of the option is to disallow the creation of IT2005's record for all the employees in Org Unit 1.
Is it possible to do this through standard SAP?
Thanks a lot.

Hi,
The best way to control this will be with Authorizations so that people belonging to one Org.unit should not have IT2005 mantainence.
Let me know if u have any concerns on this.
Thanks
Swati

Sample code for creation of contact

Creation of contact using the java api does not work as it should for me. I think i dont have the correct format for the vcard will someone help me with this!! A sample code example will be very helpfull§. I am using calander version 9.0.4.
any additional information can be provided!
thanks
joyce

Creation of contact using the java api does not work
as it should for me. I think i dont have the correct
format for the vcard will someone help me with this!!
A sample code example will be very helpfull§. Hi Joyce,
The thread "create contact returns -- CAPI_STAT_LIBRARY_INTERNAL_COSMICRAY"
is the correct way to store a contact. Note that I just updated the thread.
What is your problem exactly?
Jean-Philippe

FM or BAPI for creating/deleting condition records for an output type

Hi all,
what is the FM or BAPI for creating and deleting the condition records for a Z(custom) output type.

You can use trasaction SXDA_TOOLS.....
object type BUS3003
program type BINP
program/method RM06IBI0
but the fields must be sequentially written in the txt, with every space inclusive....

Creation of Contact Person for a vendor in SUS, MM SUS scenario

Hi All,
We are working on EBP for bidding with SRM 5.0 and ECC6.0 as the backend. When we do BBPGETVD for the vendor root we have to create a contact person for the vendor to logon.
Our clients requirement is that all the data in the R/3 has to come to EBP including the telephone number and email addresses so that the vendor number should be created as the contact persons userid.
Is there any way to achieve this?
Best regards,
Sridhar.

Hi,
Also you dont need to enter any roles while creating the Contact person for a vendor.You just need to enter the employee/user details who will be the contact person for the vendor and after you save all the data ,the CP for the vendor will be created and the system will issue a message "Contact person XXXX for BP yyyyy created".
BR,
Disha.
Do reward points for useful answers.

Need User Exits for Creation of Delivery and for Posting Goods Issue

Hi,
I need User Exits for
Creation of Delivery
Posting Goods Issue
I need to make some checks regarding customer license expiration and if checks fail, I need to stop Creation of Delivery and Posting Goods Issue.
Thanks in advance,
Will reward,
Mindaugas

In the delivery you can use userexit USEREXIT_SAVE_DOCUMENT_PREPARE to make your checks and send an error message to the user in case they fail.
You can find this user exit (form routine) in include MV50AFZ1.
Hope that helps,
Michael

Creation of multiple Records in the file as per multiple segments in IDOC

Hi SapAll.
i have got a requirement to create a multiple records in a file based on multiple segments at sending Idoc in a File To Idoc Interface.
the Scenario is the reciever message type is mapped with fields of 3 segments in sending IDOC.
SEG01 1.....1(PARENT SEGMENT)
SEG02 0...999999(CHILD SEGMENT)
SEG03 0...9999999(CHILD SEGMENT)
in an instance where if the SEG01 exists for one time and SEG02 exists for 2 times and Seg03 Exists for 2 times PI is creating the file with 2 records in it but
when if the SEG01 exists for one time and SEG02 exists for 2 times and Seg03 Exists for 1 time it is raising the error in message mapping where it is supposed to create 2 records in a file with empty values in the fields (mapping with seg03) segment.
can anybody help me in this.
regards.
Varma

you can create a UDF after you validate if the count match. if match you create the message if not, call de UDF.
this UDF should receive two parameters -->Queue SEG2 and queue of SEG3.
then you should loop by the count of SEG2. if you find a Supress Value in the queue of SEG3 add a "" to result. for example.
for(i=0;i<=SEG2.count;i++){
If SEG3<i>.equals(ResultList.SUPPRESS) {
result.addValue(" ");
}else{result.addValue(SEG3<i>);
the result of UDF is a queue which should map to target field directly coz it has context changes
I think that is what you are needing. if no let me know.
RP
Edited by: Rodrigo Alejandro Pertierra on Jun 17, 2010 11:56 AM

I gave my old iPhone to my partner. We reset it and set up new e-mail accounts for her. But in Settings the iCloud account is still in my name . How do we change this?

I gave my partner my old 3GS. Everything worked well for a couple of years. Then a week ago she was not able to use her gmail and yahoo e-mail accounts. With the yahoo account she is being asked to give my ID and password. We have deleted and restored the accounts.
WHen I look at settings, it appears in ICloud that the phone is still registered in my name? How do we change this? In doing so will she lose all her information from the past two years?
We backed up the phone to a pc two days ago.
MY worry is that the backup has the incorrect information so we may get into a cycle of restoring it and not fixing the problem.
Regards

have you logged out with the old appleID in settings->itunes & app stores ?

User exit for MIGO and MIRO to change the GL account posting

Hiiii
I have a flow like this .
When i create a PO --> i do a Goods receipt in MIGO transaction and there is a GR automatic posting that is done in backgroung
i needa user exist which instead of sap doing the standard posting in let's a GL account No i want sap to use the Gl account No XXX
When is then do a Invoice receipt instead of an IR posting will also be done. I need a user exit where instead of using the GL account of the standard i use the GL account XXX
please advise which user exit i can use.

HI newbye82c,
have a look at these exits/badi:
Enhancement
MBCF0010                                Customer exit: Create reservation BAPI_RESERVATION_CREATE1
MBCF0011                                Read From RESB and RKPF For Print List in MB26
MBCFC003                                Maintenance of batch master data for goods movements
MBCFC004                                Maintenance of batch specifications for goods movements
MBCFC012                                Set Cycle Counting Factory Calendar
MBCF0002                                Customer function exit: Segment text in material doc. item
MBCF0005                                Material document item for goods receipt/issue slip
MBCF0006                                Customer function for WBS element
MBCF0007                                Customer function exit: Updating a reservation
MBCF0009                                Filling the storage location field
Business Add-in
MB_DOCUMENT_UPDATE                      BADI when updating material document: MSEG and MKPF
MB_DOCUMENT_BADI                        BADIs when creating a material document
MB_CIN_MM07MFB7_QTY                     Proposal of quantity from Excise invoice in GR
MB_CIN_MM07MFB7                         BAdI for India Version exit in include MM07MFB7
MB_CIN_LMBMBU04                         posting of gr
Hope it helps,
Matteo

CRM contact record passing the values from Custom application

Hi,
I am passing the values from my custom WPF application to create the contact.
while passing the first name, last name, addressLine 1 Mobile number it's working fine. while am passing the date of birth it's throughing an error. I am not able to identify the exact issue please giv me the suggestions
var firstname = txtFirstName.Text;
            var lastname = txtLastName.Text;
            var dataofbirth = this.DatePickerValue;
            var mobilenumber = txtMobileNumber.Text;
            var rfcvalue = txtRFC.Text;
            var addressValue = txtAddress.Text;
            var extraqs = "firstname=" + firstname;
            extraqs += "&lastname=" + lastname;
            extraqs += "&mobilephone=" + mobilenumber;
            extraqs += "&address1_line1=" + addressValue;
            extraqs += "&birthdate=" + dataofbirth;
            //var totalextravalue = "extraqs=firstname%3D" + firstname + "lastname%3D" + lastname + "birthdate%3D" + dataofbirth + "mobilephone%3D"
+ mobilenumber + "ifp_rfc%3D" + rfcvalue + "address1_line1%3D" + addressValue;
            var contacturl = Constants.Contact.Attributes.URLNew + "etc=2&id=&pagetype=entityrecord&extraqs=" + HttpUtility.UrlEncode(extraqs);
-Regards
Rammohan

You should set date in this format
&extraqs=date=01/31/11Hope this helps
Sreeni Pavalla

BAPI/FM for creation of CONTACT RECORD for the contract account

Similar Messages

Maybe you are looking for